new installation of 11 GR 2 - does not accept passwords

Similar Questions

• computer Vista laptop does not accept password

  I have been using my HP vista laptop and today, it does not accept my password. I tried safe mode and tried to change password. NO RESULTS...

  Help, please...

  James

  Dunedin FL

  Hello

  It is available on you microsoft information help on problems with passwords

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  ________________________________________________________

  except that we cannot help you

  read this microsoft's policy NOT to provide assistance to crack passwords when they are lost or forgotten:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• Can not get address for printer does not accept password

  Went to the eprint centre to save the printer worked fine but when we tried to give address printer so we can send to the remote printer does not accept the password any itry

  MasterBinker, have you tried to use the link you have forgotten the password in the login page for ePrintCenter?  This should send a new password to the email address.

  You can also try using a different web browser.

  Kind regards

  Sean

• BlackBerry smartphones HELP! "BOLD" does not accept password

  Hi all

  I have a big problem with my "BOLD" (German) 9700 BB.

  As I took on my jacket this morning it does not accept the password to unlock the screen.

  I thought it was me, so I tried again and again led attempts 3/10, 4/10, 5/10...Normally there are stars, so you won't see the pass, now its clear letters and numbers? More: top-right corner it showes EN then maybe this past German to English settig (I don't have it-on lens)

  I am now 9/10, the screen asking me to enter 'blackberry' but I am learning that if it doesn't hurt once more all on the Phanoe will be deleted which would be a nightmare that I don't have a backup...!

  an a German forum about someone with the same problem 'translate' pass numbers (1111) in letters (YYYY) as his apparently English keyboard - I did (get low), but it did not work?

  Someone at - it p l e a s e!

  Thans, Felix

  felixxx wrote:

  Indeed, I managed to change the language with alt + enter in German, which is good.

  Great!

  felixxx wrote:

  But again, if I want to type something in, clearly shown figurs/numbers, rather than the usual stars that makes me feel theres something wrong...

  Yes, it is normal to show you the characters you type, and it normally occurs after 5 wrong password entered.

  felixxx wrote:

  I just plugged it up tho my pc and after the beginning of the BBdesktop, he showed a popup saying:

  "you know that you only have one shot left. After that, all your data will be deleted.

  What is strange: in the title of this popup, he says: BB Bold 9700 - PIN 22BEE12C - what is it? do I type?

  You has not answered my question earlier if you have alternate characters or numbers in your password?

  If so, should we ALWAYS register the pressed ALT key first to this number?

• New installation of XP PRO sp3 does not recognize the 500 GB HD

  OK, here are the details:

  System: Computer PORTABLE of Acer Aspire 1700 Pent4, 2 GB of RAM, 80GB (3.5 "full-size, trainee) IDE HD [this is the original HD on this laptop of size important which is designed to use disks 3.5" hard].

  Initial situation: Windows XP Pro (SP3 integrated) installed on HDD of 80 GB and works without poblems. BIOS does NOT show the ability of the intern HD in the BIOS screen. BIOS reports only the model and the serial number of the HD, and there is no options to specify the HD type/format (e.g., MLA, etc.)

  Available: Win XP Pro bootable CD slipstreamed with SP3; It is tested and verified work well to install PC or laptop!

  When running XP Pro on a partition internal 80 GB HD, and when I join a brand new WD 500 GB IDE HD via USB, HD is recognized correctly. I can partition and copy data on the HD 500 GB with no problems!

  When I replaced the old 80 GB HD with the new HD 500 GB HD interning on the laptop, I have the following problems:

  1. I can NOT boot into Windows XP Pro (SP3) which was Ghost on the HD 500 GB of the old 80 GB portable HD it recharges, and if I try the console recovery or secure boot, then the laptop restarts also.
  1B. I have Ghost xp partition to 80 GB HD to a piece of spare HD (40 GB) and replaced the 80 GB with the 40 GB HD and was able to start the laptop without problem. So the problem is NOT related ghost!

  2. I can't perform a clean install of Windows XP Pro (SP3 integrated) because Windows XP Setup recognizes the HD 500 GB GB 131 HD. Therefore, the remaining capacity is not recognized.

  3. I can NOT perform the installation of Windows XP pro (SP3 integrated), even if I have previously partition new HD 500 GB by attaching it to a free desktop PC and use Partition Magic, partitioner of Paragon Disk or other partitioning tools. After partitioning prior, when the 500 GB HD is installed on the laptop (as a trainee HD), then win xp installation lists quality HD of GB 131 and lists the existing partitions as corrupt!

  4. Curiously, if I use Knoppix, Debian, Ubuntu or linux boot CD Mint and start the laptop computer with one of these linux distributions, then the linux installer recognize the HD properly during the phase of recognition of material and later during the phase partitioning HD, the linux system to report a full capacity of 500 GB available for partitioning. In addition, when there are partitions, partitioning linux program then lists these partitions properly as well!

  Considering the 4 points and especially MS Windows XP PRO (integrated with SP3, which should recognize HD with sizes exceeding 137 GB limit - from MS says you must be at least XP SP1 to overcome the size 137 GB limit - and that the different distributions of linux can see the full-size HD 500 GB with no problems) which is exactly the problem with Win XP? Why it does not recognize the full capacity? And how to win xp recognizes a 500 GB capacity, if the new HD is attached to the laptop via USB as an external drive when running XP PRO (SP3) of the 80 GB internal HD?

  so... Can anyone sheds light on the issue with Win XP Pro installation on HD 500 GB IDE?

  Nicely,

  LO

  Hi Palcouk and Doc,

  I think that's the final answer!

  Although, there is a mixture of simple to complex responses to the problem at hand, what it all comes down is that there is a significant difference between the installation of Windows XP and Linux installer program. The XP installation program needs help from the BIOS to deal with HD, and if the BIOS does not support, XP not has no facility to remedy the situation. OTOH, most of Linux new kernels rely on the BIOS for a limited number of extended, but communicate directly with the hardware, in this case, with the HD and therefore manages the material accordingly.

  It seems among users of dual-booting (win/linux) using old PCs, it is a matter of very pretty. What they end up doing is using the first 137 GB that is seen by the BIOS without problem for XP (either as a single partition or divided into several partitions), and the rest of the space is used for Linux because linux has no problem.

  I guess that it really nails the problem with my laptop to a BIOS NON-lba-48-bit!

  Then close this thread as answered or matter who has more to say about this?

  LO

  P.S.: It was very nice meeting you fellows and appreciate all the help and tech expertise.

• Installation of 4500 HP Envy does not accept the IP on printer

  I was installing my new HP Envy 4500, and everything was a lot. The printer connected to my router Westell 7500 wireless and I can see it on the network with the IP 10.0.0.17. When the installation on my computer, I get to the point where he asks the IP address on the screen.  I can't clear the checkpoint.  He dislikes this IP address. (It seems like a simple IP address, is it not?) HP Envy is compatible with my Westell wireless router? This is 802.11 g, not n, but that doesn't seem like it should be a problem.

  I tried all available suggestions and tips:

  -I can connect via USB, but when I try to convert a wireless connection, I'm stuck again.

  -J' tried the program doctor of HP, and it tells me that the installation is not complete and gives me a new download, but that the download is blocked between 30 and 70 of 115, so I'm stuck here as well.

  [It's kind of weird that it is somewhat similar to the problem I had with my old Lexmark HP printer which prompted me to try a new printer. All of a sudden I had communication problems. As a first step, the document would be stuck at 15% while queue. After that I could see this printer on the network, but my computer could not communicate with her at all. This makes me think that I might have a problem with Windows 7? I tried to restart the spooler, but that didn't work either.]

  I am running Windows 7 64 bit on an Acer Aspire.

  Any ideas?

  Then it took me five days, but I finally my printer works perfectly, and I love it.

  After running many diagnostics on my computer, I came to the conclusion that I had a problem of windows 7.  I restored to factory settings (because windows even backup was stunning on me). After that installation is progressing beautifully and I got the printer set up in a few minutes.

  Was it a virus? Windows flip out because I had already run a Lexmark printer? What happened a month that made me lose communication with my old printer. I'll never know.

  But, I have solved my problem, so I'm happy.

• Try to install InDesign CS5.5 on a new laptop without a CD ROM installation wants a drive only; does not recognize a flash drive. What should I do?

  Try to install InDesign CS5.5 on a new laptop without a CD ROM installation wants a drive only; does not recognize a flash drive. What should I do?

  I didn't come across this link, so I tried to copy the desktop flash player and installed it from there. Thank you, in any case.

  Sent from my Verizon Wireless 4 G LTE smartphone

• the new Win7 disc replacement does not accept the case key

  Our dv6 - 2173cl end is more the boot, the "freeze" while showing the wallpaper with the taskbar 'framework' as well as the Start button, the HP logo button and the Date/time.  Defective hard drives the check HP tools with 90772-50e656-xd0021(7? wrote down in a bit of a hurry, sorry)-6ou103 error code.  Since the reader would also not 'take' the restoration attepmts (so the HP tools) we thought that a new disc has been a given.  Fast forward...  Now with the new drive in and a new Win7 install (no recovery disk, yes we know) the facility does not accept the key from the sticker on the bottom of the case and Yes Win7 is Home Premium on old and new.  So now, what do we do to get active Windows?

  I found that if you enter the key during installation and enter the key during activation of this always accepts it. Always works for me when I do a clean install of Windows 7 on client computers.

• I'm trying to reinstall Illustrator CS4, Photoshop, and InDesign on my new Mac.  It does not accept my serial number.  Adobe called they told me that they do not provide support for older programs and has sent me a link to here.  Can someone guide me?

  I'm trying to reinstall Illustrator CS4, Photoshop, and InDesign on my new Mac.  It does not accept my serial number.  Adobe called they told me that they do not provide support for older programs and has sent me a link to here.  Can someone guide me?

  If this is an upgrade, you must the cs4 and the serial number of versions eligible.

  Make sure you use the correct installation file that corresponds to your serial number, error: "serial number is not valid for this product". Adobe Creative Suite

  In addition, How to open third-party developers not identified in Mac OS X applications ' Mac Tips .

• Hello. I would like to activate my educational program CS3 (version 2007) on my new computer. Unfortunately, it does not accept my serial number. What can I do? I delayed the program on my old computer, but it does not accept the activation on the new l

  Hello. I would like to activate my educational program CS3 (version 2007) on my new computer. Unfortunately, it does not accept my serial number. What can I do? I delayed the program on my old computer, but it does not accept the activation on the new laptop.

  Make sure you use the correct serial number.  Quickly find your serial number

  If you do not disable the original installation, then it is possible that your two activations permits were used, and you need to reset your counter to activate.  For this you must contact the Adobe Support via chat and ask them to reset your activations.  If you ask for more than that they will tell you that they cannot offer you any support.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• License key does not accept the installation of Acrobat 9

  We recently moved and in the process acquired new computers.  I'm trying to reinstall Acrobat 9 Pro and several other tools using the AcroPro90_efg Installer (which is the only one who seems to be available on Internet).  All of our tools Adobe have the form 1234-1234-1234-1234-1234-1234 license keys.

  When I try to install Acrobat 9 Pro, it prompts to enter the license key with a single text box (unlike other tools such as CS4, which provide 6 smaller text boxes, which each accept 4 digits).  I tried to enter the key of license with and without hyphens, but Acrobat does not accept it, responded that it is an invalid key.

  Note that I did this on machines that CS4 was installed and also on machines where nothing had yet been installed and I get the same error every time: "incorrect serial number.  This isn't a valid serial number. Please go back and re-enter your serial number. »

  Steve

  I am referring to the only setup file. I think you need to contact Adobe support for help.

• Installer does not accept my password

  Ive tried to install software for music on my macbook pro, but when it comes to enter the password to access icloud to actually start installing it does not accept my password. Signed cloud online with no problem, so I changed my password, is out of the installer and tried the process again but made no difference.

  Did I miss something blatantly obvious? Any advice would be greatly appreciated.

  The installation of the software usually requires the password that you use to connect to your MacBook, not the password to iCloud.

• Re: Tecra S3 - new 250 gb Sata hdd - windows does not recoginse

  Hi all

  I have a tecra S3-PTS30-E, which came from the company, I work for which was no longer necessary.

  I replaced the current 40 GB with two different - hdd

  Western Digital 250 GB WD2500BPVT

  Toshiba 120 GB - MK1252GSX

  I tried both separately and windows XP pro service pack 3 will not recognize either.

  I have downloaded the driver sata toshiba Web site and installed via F6 at startup, windows asks you what driver, windows 2000 or XP, I click on XP and you enter, windows continues until advising so none found HDD

  I also tried to download drivers intel after searching other threads, and it does not work through floppy.

  I also added the drivers toshiba XP ISO using nlite to create a disk slipstream and while xp is loading the disc, I noticed 'pilot toshiba raid' being installed. Same no result no hard drive found.

  Can anyone help?

  Thank you

  Jin

  > Tecra S3 - new 250 gb Sata hdd - windows does not recoginse

  According to the specifications on this page:

  http://reviews.CNET.com/laptops/Toshiba-Tecra-S3-s411td/1707-3121_7-31556311.html

  Your laptop's Ide interface, as far as I know on the old IDE interface there is a limitation of LBA 28 bits, which means that the laptop can only manage hard disks up to 128 GB.

• My new HP Officejet Pro 8600 N911a does not allow a webscan

  My new HP Officejet Pro 8600 N911a does not allow a webscan on my laptop Dell Win7, which indicates on its Web page ¨that that the corresponding software is not installed".  I already tried in vain to install all software from the included cd, but did not find the corresponding software.  I was surprised to see that this cd does not start by itself, the single executable that I found was a setupxxx.exe and that did not include the scanning options.

  Anyone has a suggestion to solve this?

  Hello tutoke

  The Webscan must be selected in the tab of the administrator of the Embeded Web Server (EWS). See the screenshot below.

  1. Click settings
  2. Click the administrator settings
  3. Check Webscan
  4. Press on apply downstairs.

  Try to scan the image.

  

• Brand new Windows XP Professional SP3 key does not

  I fell right on my old CD-ROM Windows XP Professional SP1 and my new key SP3. I installed XP on my old Compaq ProSignia 165 to make it work again, and when it prompted me to insert the key, I tried my SP3 key. It didn't work as I thought, so I used the key out of my Dell OptiPlex 170 L to install because I still use it a lot. Then I threw SP3 on it and downloaded the Microsoft program change key and tried. It does not accept it, nor any of my other XP Pro key. Everything except my netbook works Pro, so what is happening here? I have to do in the registry or what? I'm starting to get fact TIC TACS in this thing, because it does not appear WHAT I put on it. Please help me, because I'm starting to lose here.

  Try the Activate by phone:

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  If the activation of the Internet does not work, then see the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 can be confused with the letter B, etc.).

  ===================================================================

  Blank page to activate Windows in the wizard of Windows Product Activation
  http://support.Microsoft.com/kb/314935

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: http://www.pagestart.com