New Nividia Grapics card and new power supply which will work on 500-199

Similar Questions

• Upgrading the video card and power supply, these will work with my system?

  Hello, I am wanting to update my graphics card as my current one is finally fall behind on current games, BF3 beta is a restless nighmare and BC2 must be smooth running low (ick). I was satisfied with the weaker graphics for now, but its time for an upgrade. In any case, I think I have my selected updates and I just want to confirm that they will work with my computer until I pull the trigger. My current equipment:

  HP p6180t

  http://h10025.www1.HP.com/ewfrf/wc/product?product=4010451&LC=en&cc=us&DLC=en&lang=en&tmp_track_link...

  Intel Core2 Quad 2.83 GHZ

  8.00 GB RAM DDR3

  Vista 64-bit

  Creative Sound Blaster X - Fi Audio Xrteme

  1.5 GB NVIDEA GeForce GT230 [DVI, HDMI, VGA]

  I plan on upgrading the graphics card on an Asus NVIDEA GeForce GTX 560 (Fermi)

  http://www.Newegg.com/product/product.aspx?item=N82E16814121446

  And the power of a passionate Corsair 850W 80 + CERT (I know this is perhaps an exaggeration, but I can update to motherboards in the future to run two SLI cards and do not want to upgrade again)

  http://www.Newegg.com/product/product.aspx?item=17-139-009&SortField=0&SummaryType=0&PageSize=10&PUR...

  I removed the side panel to check the dimensions of the new card and it looks like it fits. The only thing that could be a problem of release the cables SATA for the hard drive and hard drive because they are both plugged into the two slots, I don't think that the two superiors would be no problem at all. Depending on the thickness of the new card is also, it may be very close to the sound card that is spaced only a slit above the graphics card. I have another location available PCIe x 1 go back one level more that I should be able to plug the sound card in if there is no problem.

  My question is that these two will be compatible with my system? (physical limitations side)

  Also, can I change which SATA plug the hard drive and disc plug in, without having to reformat? Is it just unplug and plug in the new housing? (setting power off + unplugged of course) Basically passing SATA0 and SATA1, SATA2, and SATA3. Or do need to be filled in order? (0 then 1 then 2, etc...)

  Finally, If I can't move the sound of a standard card, do I need to do anything other than the physically move when the computer is turned off and unplugged?

  Any help is appreciated, thanks!

  John

  jkalbin,

  You have thought through all scenerios. Move the sound card does not any problems. The hard drive should stay in header SATA 0.

• Upgrade the graphics card and the power supply on a Pavilion p6823w - compatibility?

  Hello, everyone! After purchasing my HP not too long ago, I decided that I wanted to get updates for it. I intend to turn it into a computer game later, but for now I start small.

  I'm still a little wet behind the ears when it comes to computer hardware, so I would greatly appreciate any input on my decisions for improvement - especially if my power supply and graphics card will adapt and be compatible or if the marks are bad.

  Graphics card:

  PowerColor Radeon HD 6850 1 GB

  http://www.Newegg.com/product/product.aspx?item=N82E16814131374

  POWER SUPPLY:

  Corsair 500W CX500

  http://www.Newegg.com/product/product.aspx?item=N82E16817139027

  Here is the specific computer I have, for reference:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=es&CC=ve&TaskID=120&prodSeriesId=...

  Thanks in advance!

  Hello

  I don't foresee any problems with your choices.

  Relatives on the slot PCI-E x 16 must be vacant.  Examine the characteristics of the motherboard.

  These "how-to" HP articles should be useful.

  TIP: Unlock and slide the optical drive forward before you remove and install the power supply. This helps facilitate the removal and installation of the power supply, but it is not mandatory.

• This block of power SUPPLY Corsair will work in desktop XPS 8700?

  Hello friends,

  I really really wanted to buy the 8700 XPS because the tower is much better and lighter then the Alienware Aurora. But I wanted to know if this PSU Corsair AX760w will be perfectly compatible with the Dell XPS 8700? I wanted to update the 8700 460w POWER supply because I want to update the graphics card for a black titan Nvidia requiring 600w.

  THX

  There isn't one, perhaps that's a Yes. It is perfectly well... a little on the tight side but he did it with a bit of room to spare. I know what I'm talking about. I installed the AX760 in February in my xps8700se and it has worked perfectly since.

  Don't hesitate because this diet is one of the better ones.

• is it possible to buy the iPhone 7 more unlocked and without a subscription which will work in Russia

  My friend is going to go to New York for the holidays of the maintains 21 October to 31 October. And I really want to buy the iPhone 7 more 128Gb it. I know that I need a free sim card or without a contract. I asked best buy about this and they said they don't sell iPhones with contracrs. Is this possible?

  Thank you.

  Apple has not announced when they will start to sell the iPhone Unlocked 7.

• new power supply and HARD drive for t350.it

  Hi, I should install an ATI 4650HD on a t350.it, but the requirements of the system says I need a 400W power supply, while this pc has a 220 W one. Can someone confirm this for me? In this case, can I install a 500W power supply in this pc? Another question, it should be installed even a 500 GB Sata HARD drive, but the location that contains the drives are very close, you can see in the attachment to page 104 page signed 'disco rigído' with the G, can this cause a problem of high temperature? This pc is compatible with a Seagate Barracuda 500 GB SATA?

  You are right.  Is there an AGP version of the card.  I just wanted to make sure that you were aware of the correct version.  Many have made the mistake of buying the wrong type.

  Yes, the PSU's power supply.  Sorry for the use of the acronym without explanation. You will find it difficult to find a more powerful power supply which will be insert in your case.  The 220W is about it.  There is a lot of discussion on the forum about this problem.  I don't want to specify on the thing, however.  The amount of power supplied by a PSU is only as much as the system needs to run.  It has the production capacity of 600W, does not mean that it will be clocked at that power all the time.  It would not damage your motherboard (motherboard) If you have installed a.

  Message edited by old_geekster on 09/09/2009 16:05

• Pavilion NC768AA #ABA: HP Pavilion model. a6719f new video card with the new power supply?

  Hello!

  So, I won money to buy (hopefully) a new video card!

  However, I have a problem.

  I don't know which one to get!

  SO, someone please, please recommend a video card for intermediate level games.

  (My budget is less than $280)

  My PC has stock everything.

  Thus, it was purchased as it was when you would get everything first he.

  Yes, I need also a new power supply that is included with my budget.

  Thank you!

  Revionion, welcome to the forum.

  I'd be happy to help you in your choice.  The main problem is, recent video cards require UEFI in the motherboard instead of a standard BIOS to legacy.  HP didn't start using UEFI until mid-October 2012.  The latest maps not requiring UEFI were the series GTX 640.  However, MSI has made a card that has a VBIOS hybrid which can operate with a BIOS.  The best thing to do is to choose a video card you like and contact Technical Support from the manufacturer to ensure that it will work on your computer as it is almost 7 years old.  This will save you problems.  They are the experts on their cards.

  I like Corsair power supply units (PSU).  I suggest at least 500W.  This will give you plenty of power for any card that works in your computer.

  If you have any other questions, let me know.  I'll be happy to help you.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• ASUS IPMTB-TK Pegatron card mother watt minimum / maximum specifications for the new power supply

  I need to get some update a new GPU card will need a bigger PSU but can't seem to find the specifications of power to my motherboard. I know that connections in the search of what power this motherboard is rated for.  Help, please! and thank you Asus Pegatron IPMTB-TK Intel x 58 Socket 1366 mATX

  Hello

  You should be able to use a power supply up to 650 watts.  I've seen a few posts on this forum where more than 650 Watt power supply would not work.  I have successfully used a Corsair HX650 with the same motherboard.

  You have some good recommendations for old_geekster and wb2001.

• New power supply and logic board?

  I need to get a new power supply and the logic board put in my iMac - when I did, this is my iMac will be indented from the base/settings (i.e. will I need to put everything on my external hard drive to backup) or will all my personal data / records/work etc., always be on it?

  All your data, applications, and settings are on the hard drive, if that is not replaced everything will be as it was. That said, you should always have a backup before you take your mac at home.

• new power supply for a6319fh

  im going to be upgrading my diet so I can update my graphics card. the vehicle currently has a 250w power supply and I want to go between 450-600w. I need to know what brands will certainly adapt to my case. I have a processor intel dual core and im on vista sp1. also the new power supply will require an update of fan? any help will be greatly appreciated.

  Given that this case is an office of size, or it seems, you should be able to use a standard ATX power supply box.  To be sure, take it with you for the purpose of comparison or get the dimensions.  The fan is usually part of the diet, unless you want to say the "fan" which will probably still be OK, too.

• HP Pavilion p6-2: problems on blocking down after I installed the new power supply on a p6-2207ep

  Hi all

  B4 explaining my problem, I really don't know if I should post this in office, or material in this section of the freezes/crashes/locks but since I posted in freezing section and no results I decided to try here.

  My pc: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=c03382032

  I bought a new PSU: XFX TS 550W 80PLUS BRONZE for the GPU upgrade 380 R9 I was planning to do.

  Is there some BIOS I get HP for this cause of power supply from what I read, if I not only one of the things like manufacturer reset to the factory settings may stop working... Currently, my Bios version is 7.11...

  Problems with the new power supply:

  When I closed windows 7, the first problem, the picture freezes on the screen that says "blocking windows down", I waited a bit and nothing, tried to turn off the machine while keeping down the power button but nothing to disable directly in the rear switch of the PSU...

  Second time happened a little different soomething, seconds after freezing again on the screen that says "blocking windows down" windows actually turned off and the screen is off but everything inside the computer case continues to flow fans in light of the power button / stop and was also able to close by keeping pressed power button...

  When I restart the computer, to which some time stops, and only after a few seconds, it turns...

  Also tried the GPU with the new PSU fans worked but no entry in the screen that I guess just a power supply problem.

  ATM, I'm RMA waiting to know if it is a power supply defective or not...

  Problems after the reinstallation of the original material:

  Some of the same problems when I got the new PSU remained namely:

  Windows actually stop and the screen is off, but everything inside the computer case continues to flow fans in the light of the button on / off and was also able to close by keeping the power button...

  When I restart the computer, to which some time stops, and only after a few seconds, it turns...

  What I've done so far to try to fix the problem:

  Restore windows 7 to a b4 point the hardware installation.

  Reset the BIOS

  Hard reset

  Clean boot

  Do you have a full checkdisk which means 0 KB in bad sectors...

  A complete hardware checked all tests with the HP software

  A system file check everything beautiful

  What I fear most is a faulty PSU that may have caused damage to my equipment mainly the motherboard, but could be something else entirely.

  Maybe I need a specific BIOS for that motherboard / PSU combo, but after returning to the source material, the problems remained.

  What I can do because I can only make the software tests since I don't have an extra PC to test the parts...

  Hello

  Disconnect all external devices except the keyboard and mouse when you try to solve the problem.

  Disconnect the PC and removed the CMOS battery.  Press and hold the power for 30 seconds.  Now, replace the CMOS battery and plug the PC give a TI a go.

  Your PC is not stable enough to make a BIOS update. Do not attempt to use the graphics card XFX until your PC is stable enough to make a BIOS update.

• Find a new power supply for HPE-350 t

  Recently I upgraded my graphics card to a MSI GTX 570 Frozr III, he returned barely in there, and now I need to replace my power supply 300W so my computer would stop closing. I was very happy of the journal online CORSAIR TX650, but here is a problem: he's going to slip into my computer case, which is a t HPE-350? I would like to get a new power supply as soon as possible and please help me

  Hello

  Open your PC and measure the distance between the optical drive and power.  The power supply you want to install is by 3.4 by 6.3 5.9 and standard HP POWER supply is by 3.4 by 5.5 5.9 (inches). It might been very tight.

  Corsair HX650 is 5.9 by 3.4 by 5.9 and modular.  You will find may be easier to install.

  TIP: Remove the front panel and the side as the optical drives to the front so you give a little more space for help with the installation of the power supply.

  ' HP ' how-to ' articles should be useful.

• Want to a new power supply for my SG3-250uk

  Getting a new power supply for my SG3-250uk because I need a new graphics card, but I don't know which ones fits, please help. Thank you

  MattSid wrote: Yes, that thread has me also, I posted this one to see if I could adapt a new PSU in my computer

  Hello MattSid, I did a search on Google for the model number of your system and found several sites that have tried to upgrade the model you have and suggestions that these owners have been advised that it was impossible successfully.

  Sorry

• My new power supply work with my motherboard?

  Hello

  I reasontly bourght a few upgrades for my PC.

  I bourght an i7 870 and an AMD 5670 + a new power supply

  So my question, what ive in doubt, my new PSU(CX-500) work with my motherboad (MS-7613(Lona-GL8E)?

  Thanks in advance

  René Tyrsted

  Thank you.

  Yes. It will work.

  However you will probably find a little tight because of remaining unused cable bundles. My preference for the PC ATX Mid-size boxes are of the modular power supply. With a modular power supply connect only s connector as much as you want.

  Do the upgrades one at a time.  Start with the power SUPPLY and any other origin. Check that it works and then close.  Then go to the graphics card.

  Happy update.

  Best regards
  ERICO

• New power supply for Dell 435 t/9000

  So I had some problems with my computer randomly power loss and to make a long story short, I need a new power supply. I have currently a 485w some brand power supply dell PSU happens to come up with, and I'm looking to upgrade to 500w. Any experience/suggestions for a PSU recommended for a Dell 435 t/9000? I fear that the pin connections are not compatible with the card mother dell, so I thought I would ask someone more experienced that I am to suggest a good 500w PSU that will work. Very much appreciated.

  Kerfindo

  Generic ATX power supply can be installed, in the Studio XPS 9000/435 t with a power 24 pin or 20 + 4 pin main motherboard and EPS/ATX12V 8-pin, with or without the on/off switch.

  You should be able to buy a compatible power supply either a local computer or online store.

  Note: A power supply with 5 SATA connectors, is necessary.

  Suggest you use the Corsair and Antec brands:

  http://www.Newegg.com/product/ProductList.aspx?submit=Ene&N=100007657+50001459+600014006&IsNodeId=1&name=Corsair&page=1

  http://www.Newegg.com/product/product.aspx?item=N82E16817371055

  http://www.Newegg.com/product/product.aspx?item=N82E16817139053

  Bev.