New on DMVPN - internet Hub do talking

Currently setting up spoke and DMVPN between a hub.  We use all static routing.  I managed to create the tunnel and I am able to get into our internal network by spoke them lan.  However, I am unable to get any internet access.

This is the static routing on the RADIUS:

IP route 0.0.0.0 0.0.0.0

IP route 192.168.48.0 255.255.240.0

In our old site 2 site scenario, simply recall the default route for the Tunnel interface and then traffic would flow like that and then statically route other data we want to go somewhere else.  However, I noticed in this scenario which is not the case.  Also, when I go to the point of the route default somewhere other than the ISP gateway (even to the tunnel Hub ip), I lose all connectivity to the lan Hub.

Basically, I just need the traffic by talking them through the tunnel on the hub, if all resources and internet access will be charged.  Any advice would be appreciated!

Hi Ken,

Not a typical requirement for channel 0/0 to dmvpn hub. To do this, you must:

1 correct routing on the rays which will point to the tunnel of 0.0.0.0/0

You can get that by example of routing, static or dynamic:

IP route (this is to have connectivity tunnel)

IP route 0.0.0.0 0.0.0.0 (send all traffic through the tunnel)

I've never tested this scenario - but it would be my test.

---

Michal

Tags: Cisco Security

Similar Questions

  • 80-year-old wants new PC without internet

    My father wants a new laptop, but does not have access to the internet. This would be OK except that each new PC says 'internet required and not included.' I can provide internet for updates and intial configuration, however it will be questions using the PC without internet at home? It will use for photos and movies at home and the games included, as appropriate. Thanks for sharing.

    Hi MarkLip,

    Things like games and movies at home, once they are downloaded from the Internet or if they come with the laptop, no longer need the Internet. Some people, especially the more people, don't like the risk perceived security of the Internet, so it is understandable that they would like anything to do with it. If your father wants to only use games and watch downloaded movies, he can do it on a computer that is "Internet-ready" but not truly connected. For movies and games, that he might try a HP Tablet. They are ready for the Internet, but do not have to be connected.

    I welcome your father to be involved in the digital age!

    I work on behalf of Hewlett-Packard.

  • my laptop can't find my internet hub

    Basically, I Don t know if I have any virus' or something else that I have a few peoblems. the first is that on my laptop, I forgot what my password person so tthat, it is difficult to do something. and I really need to get on this account.

    Second, I can not connect to my internet hub.
    third, I can't get on the internet through this.if you can help, I would be so grateful! Thank you!!

    Hello

    1. are you using cable or wireless network?

    2. what happens when you try to connect to the Internet?

    3. which antivirus app do you use?

    I suggest you try these methods and check the status of the issue.

    To fix the administrator account:

    Microsoft's strategy concerning lost or forgotten passwords

    http://support.Microsoft.com/kb/189126

    Internet connection problem:

    Method 1:

    Using the troubleshooter from network in Windows 7.

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    Method 2:

    Wi - Fi and in Windows network connection issues.

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    To fix the anti-virus:

    I suggest you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software. The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  • After installed LR6, I firstly the Programm. Its audit of my ID. But then the program does not accept the button: Seriennummer prufen with a new window: no internet connection. But the connection is OK.

    After installed LR6, I firstly the Programm. Its audit of my ID. But then the program does not accept the button: Seriennummer prufen with a new window: no internet connection. But the connection is OK. So I can't start the program.

    Hello Siegmud,

    Wende Dich wie oben und some showers a cat den, denn

    Problembehebung für die Aktivierung und Deaktivierung > Stellen Sie sicher, dass eine zum includes Internet connection > werden (auch) displaying Fehler, wenn Ihr Computer nicht mit dem Internet ist clear (breast kann, dass) oder wenn er nicht vom Aktivierungsserver erkannt wird. Wenn are sich um einen Fehler im accordingly mit dem Aktivierungsserver all, set Sie sich mit each in connection. Halten Sie your Seriennummer bzw. Adobe-ID bereit.

    Hans-Günter

  • I can't open pdf in my new computer in internet. Help please

    I can't open pdf in my new computer in internet. I have Windows 8 and Internet Explorer 11. There is no open a blank page with a white x in a black square. How can I fix?

    You can use the same script that I posted to the other user in this topic, spanishharlem.

    I'll tie it again in this post.

  • How to open a bookmark with a single click in a new tab as internet explore

    Hello

    In internet explore, you go to your Favorites and then you go to a bookmark and then point the mouse on the bookmark, you will see an arrow and if you press it, the bookmark will open in a new tab

    any chance in firefox?

    I know that if I right click I choose open in new tab, but I DON; T want to right click

    I do not understand your answer, what arrow, and where you changed it.

    Since it is by clicking on a bookmark is the arrow cursor?

    Maybe not important but where the bookmark and how you were viewing.
    Menu, sidebar, library.

  • How to create multiple windows for a vi that you can access at any time... just like the use of creating new window in internet explore

    Hello guys,.
    I want to create a vi that dat when I press a button on the front of the vi, it opens the same vi in another window... and I should be able to work on this new window also able to work on the previous window without closing... Just like opening a new window when you use internet explore...
    I try to make my vi one reetrant vi but when I click on the new button in the window my vi... a new clone window upward I can control but the previous windows isn't accessible no I close the current window. I want a way I can access the two operation window and d vi of one does not affect the other, as when the indicators are updated in a single window another window will not update...
    Thank you...

    I discovered a way to call a new window... I did use to dynamically call the vi again whenever you press the new button in the window rather than call a Subvi. Thanks Guy

  • I can not properly install an update called (internet explorer 8 for windows vista) I get this message (Setup cannot continue because a newer version of internet explore was detected on this computer)

    Ideas:

    • I had problems with google before but everything was OK after uninstalling all programs of google
    • Error messages like end of google, but that was before
    • I change web browser safari because some time cannot open internet explore it, but so far, I get the message this new update available that it's the same update with the same problems that cannot install
    • I use windows vista business 32-bit

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    All,
    I suggest that you run repair the automated for: reset Windows Update components and then after restarting your computer, run Windows update and see if it is available again.  Also, you should look through this article as well: Troubleshooting Windows Update: updated proposed repeatedly.

    Let us know the results.
    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • New printer and Internet Explorer does not recognize it - other programs do.

    I have a used computer. Just got a hung printer today. Tried to print things through Internet Explorer and it did not recognize the new printer. See all other programs I've used today.

    Help!

    Hello

    1. don't you get an error when you try to print Web pages?
    2. what version of IE are you using?

    First, make sure that you have installed the latest drivers for your printer.

    Refer to this link for help:
    http://support.Microsoft.com/GP/pc_print_introduction

    Kind regards
    Afzal Taher - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • New disk hard internet rcognizing not

    I have a B110 Dell Demension that I swapped to hard disk with new and recharged with initial start-up diskettes. Now, it will not be recognized my broadband internet connection. I went to tools and internet to internet set-up options, but it still will not recognize

    Hi James,

    After a reset to factory on a Dell PC, Dell recommends that, reinstalling device drivers are carried out in a particular order. Please refer to the link below, to find out how to reinstall the drivers for your

    http://support.Dell.com/support/topics/global.aspx/support/DSN/document?c=us&CS=19&docid=1A0C0937D62A8739E0401E0A55174744&doclang=en&l=en&s=DHS

    Good luck.

  • Linksys wireless router is not my new Motorola modem Internet access

    I am relatively new to setting up home networks, so it's maybe a stupid question but I'm stuck! I bought a new modem Motorola (SurfBoard 1621) as my old Motorola modem was not favorable to the increase of the speed offered by Comcast. The modem I bought was a model recommended by their web site. They recorded the new modem last night and I can access the Internet when the PC is connected directly to the modem, but not when the laptop is connected to my Linksys wireless router. (Sorry, I don't know the model because it is at home and I'm at work!) Is there something I should do for the router to recognize the new modem? The router recognizes the wireless laptop, but it can not connect to the Internet.

    Thanks a lot in advance for your help.

    Success! Thanks a lot for your answer. My router is a WRT - 54G links.

    The instructions were very informative, although I have a suggestion. Just restart the modem and the router did not work. I had to reboot other equipment in my system (a NetGear firewall and a level switch 5 ports) and the router and the modem. I would like to see the reboot of reference tracking "and other devices. I guessed the appropriate power of sequence (modem, firewall, switch, router, computer), and fortunately, it worked.

    Again, thank you for your quick response.

  • New connection to Internet Comcast, HP All in One C410 printer won\ ' t work

    Just got a new Comcast Internet connection. The printer is connected wireless. I connect it and the macbook pro laptop to the modem and both show that the wireless connection is present. However the impression that gets saved with print jobs and do not print them. Any help would be appreciated.

    Hello

    You probably need to remove and readd the printer to print.

  • Computer blocks all programs when you try to save a new file or Internet download file, help!

    Hi, recently my PC toshiba laptop windows 7 I have had for many years has had random some software problems, he started with just my internet browser (google chrome) is not able to download any file to any site (when I tried it would just crash before you open the my computer window) then google chrome stopped opening altogether without crashing...

    I managed to use internet explore for firefox that does not crash, but still won't let me download files directly etc, but now is not just to download the internet browser, in each program here I can't "Save" all new open files without it crashing (and save do not) or download whatever it doesn't matter where (programs crashing and not being able to save being the main issue that makes me absolutely anything to do now). I tried a via command prompt sfc scan, reboot / system restore point etc, nothing has worked.

    This happened to someone else before and is the only way to solve this problem for just wipe my computer and reinstall windows or what? Any help appreciated, am panic en masse here!
    So to sum up, I can not open/download the files on line or save or save as / export things all new file I open in ANY program, without blemish and crashing, but the computer itself still works and there is no virus detected etc...

    To solve your problem requires an expert trained to sit in front of the machine. It is not realistic to do that via a forum. I see these options for you:

    • Ask a computer-savvy friend to help you.
    • Have the device repaired.
    • Perform a destructive factory restore, using the hidden disk partition.

    If you choose the third option, then you must back up all personal files, then check first on another machine if the files are readable.

  • new Office has internet problem

    When the desktop is on internet stutters when downloading information, then the screw upwards with for the whole House.  How can I fix or Desktop must be replaced?

    You have iCloud library lit, or some other cloud of basic service that would attempt to synchronize / back up data on the cloud? If so, you can saturate your uplink, which will cause the downlink of slow down down/stuttering as ACK packets cannot be sent efficiently by other systems on your network, resulting in repeated broadcasts.

    Check the activity of the network in activity on the desktop monitor.

    If the machine tries to make a Time Machine backup for the first time to a Time Capsule or other network connected devices, you might saturate your LAN, which results in similar behavior.

  • What's new in "Temporary Internet Files".

    Have XP Pro SP3.  Ever day I send items of "Temporary Internet Files" to her recycle bin and delete them.

    Last month, I started to see articles such as: REGA82.tmp;  REGA83.tmp; REGC24.tmp.

    Can you tell me what they are?  Have tried Wikipedia, Bing, Yahoo, Google and several Microsoft sites without success.

    Thank you.

    Here are the temporary files that might have been created by a process or program, or created during the display of a file or a video from any web site.  You can safely ignore or delete them during your cleaning sessions, as you prefer.

Maybe you are looking for

  • audio of YouTube does not

    When I go to a site with an embedded vudeo YouTube I can play the video, but can not get audio. qould be nice to be able tonopen video in the YouTube app or hear the sound on the embedded videos. under firefox 24 samsung galaxy s3

  • accounts Skype that can

    Hi all IM vivek im cant using Skype severil time.so befour I forger the my username / password etc... The sandwich me so just how delate my Skype account and how to use facebook account on Skype with the chat, call, etc...

  • Hard disk space missing?

    I recently moved from MacBook Pro with a 1 TB harddrive to a MacBook Pro with a 500 MB hard drive. On the old laptop, I used about 150 MB and 850 MB of free space. However, I have the new laptop, only about 140 MB of free space and not the approximat

  • measure the tension between adjustable borders

    Hello For my program, which I use to read temperatures and flows, and etc., on an engine test bench, I want to be able to build in a sort of borders of adjustable threshold for the minimum and maximum values for the tensions. When the engine is not r

  • Help password Bios Bypass. (G62)

    Hello, my name is Richard thorne kalmbach I am a student at the College (vocational technical school) of the Charter and gave me the task to bypass this bios password. I opened the back to see if I can find visually the CMOS chip for resetting, but i