New printer: HP all in one printer 8610

Similar Questions

• All-in-one HP OfficeJet 8610: All in one HP 8610 does not print right to police

  Hello

  you just bought a new HP all-in-one officejet 8610 to replace my 8600.

  I use a police - Babylon5 hollow - to print a message (like "COPY") to the text, in red (but result in black or any other color is the same).

  While my 8600 (and all my other printers) does it perfectly, the 8610 messes things.

  The lines of the police (I use the 50 size) are so thin that the text is as good as not there.

  I checked the settings of the printer, and they are substantially the same as for the 8600.

  Any ideas? I use this font for years, and I am very attached to it :-)

  Thank you

  Leo

  Hello

  It is not the solution, but I solved my problem by using another font.

  Thanks for the support,

  Leo

• New Canon MS216 all-in-one works very well (test prints work.) But it does not print some documents I send to her.

  Support Menu Ex driver is not installed. Do I need? I am running Windows 7 and that you have installed a new MF216 Canon all-in-one. It keeps switching me to fax or scan, when I want to do is print my computer USB connected articles.

  Hi Irma,.

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the number of full model of your printer?

  This problem may occur if the settings or device drivers are corrupt.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the printer Troubleshooter and check.
  Refer to this article:
  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  He made sure that a printer is connected to your computer, and it checks for common issues such as whether the printer has enough paper and toner to complete printing your document.

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions provided in this Microsoft support article and check.
  Reference:
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Incredible problems to get the new workgroup C8180 All-in-one

  I bought a C8180 All-in-one printer to the end of September. When I plugged in and installed the software, everything seemed to function OK (I didn't test printing from the computer at the time), but after a short period of time to print Microsoft Word and Wordpad failed, started working and then failing again every time I reinstalled the software to try to solve the problem. Then began a long series of emails with HP technical support. In the next two weeks I have uninstalled and reinstalled the software 6 or 7 times in several different ways, under the instruction of HP. But he never could get Word and Wordpad works correctly. Finally, once again, under order of HP, he worked with a fake installation of HP Deskjet 990c printer. Then I noticed that it was more possible to digitize documents and slides to the computer, except by using a chip memory such as an intermediate storage. Then I went on vacation after spending about 30-40 hours two weeks previous emailing and calling the HP technical support.

  Back from vacation in the third week of October, I took the issue once again with HP support. Yet once, I spent hours and hours writing emails and reinstalling the software but to no avail. HP finally proclaimed this a problem difficult and said that it would increase the level of support. A gentleman named Sylvester who sent someone would phone a day pre-arranged to see more advanced techniques could be applied to the problem. Needless to say that the phone call came not despite my cancelling several meetings to wait in it (I should have better that they had promised to phone back me several times before and has never done).

  Finally, I called customer service to the local office of HP. (At least you can get to them without having to listen to the music for half an hour for the price of 5 p / minute.) They said that they would ensure someone would contact me and would monitor the call to ensure that happened. A week later I ' d has received no call, and I went to the local customer service. Has been raised to the top level of management, and finally, after a few reminders more than me, they managed to get a senior technician, called Natheem, in their technical service Cap to call me.

  He has been very helpful (and actually phoned me several times), and finally he forced me to go through the complicated process of getting Microsoft in India (via a conference telephone with Cape Town and myself - apparently it would have cost me a lot in telephone charges, but I have not had the Bill) to give advice on how to spend my Windows XP with service pack 2 and my internet explore to IE6. I reinstalled the C8180 software once again. No difference, still the same problems, except that now, Microsoft Word would work with the HP C8180 printer driver.

  At this point, Natheem said that it must be a hardware fault and arranged for the device must be replaced.

  The new unit arrived last Thursday. I again carefully uninstalled and reinstalled the software, connected to the machine and got the same problems, but once again with Microsoft Word cannot print with the C8180 printer drivers.

  I tried to contact Natheem again once in Cape Town this afternoon. After half an hour of expensive music additional I have with a person named Waleed who said that Natheem is on a call but he would get to call. No call came.

  So on the forum, I would like advice on what to do with a new HP C8180 All-in-One printer which:

  1. not print Word documents (except by using a printer deskjet 990c driver)
  2. used to scanning documents or transparent to the computer
  3. will not print photos from the computer using HP photosmart essential, or other photo editing software

  I'm also rather fed up of the assistance provided by HP. When you get through them they always try to help, but pass through, especially for someone who knows your case is more frustrating (and costs). In an attempt to get the thing, I also had to downgrade my computer Windows XP service pack 2 OS and my internet explore to IE6. I spent probably 50-60 + hours of the last two months, trying to get the thing work.

  Any advice on what to do next would be welcome.

  BobA

  Hi David,

  Well, my story has a happy ending. I stopped trying to untangle the printer after a whole month of working hours, including a lot of phone calls to the SA and responidng to dozens of emails. But then I bought my wife a laptop Toshiba for Christmas - and it worked perfectly first time. In any case, my computer was in a bit of a mess especially when the messing around I had done on this to HP support, so I decided to reload my operating system (after reformatting hard disk), I just finished. And guess what the C8180 works perfectly (at least until now anyway)! I just updated my OS to SP2 (according to HP support the C8180 has problems with SP3), and I kept my Internet Explorer version 6 (higher versions - 7 I think - again can cause problems according to HP support). I somehow use Firefox. But now its work, its quite an impressive machine.

  I want to say individual personnel in support of HP thin is always very friendly and helpful. It's just a phone, it costs and often listen to music for a long time, its very difficult to get hold of the same person again, if you spend hours to repeat the details of your problem, and despite vehement promises they call you rarely back - probably because they are too busy. His support system which is very poor, not the support staff.

  In any case you have a different problem. If your printer does not work on computers with different operating systems. I would say that you have good arguments to either get a new printer or your money under the guarantee.

  Good luck

  BobA

• I can't install my Adobe Acrobat 9 Pro in my new HP Pavilion all-in-one computer desktop drive, because my new HP does not insert the disc in a disc drive.  What can I do to fix this problem?

  I can't install my Adobe Acrobat 9 Pro in my new HP Pavilion all-in-one computer desktop drive, because my new HP does not insert the disc in a disc drive.  What can I do to fix this problem?

  Hi edwards39572619 ,

  Please visit this link to download Acrobat 9 Pro:-download Acrobat 8 and Acrobat 9

  Let me know how it goes.

  Kind regards

  Christian

• New Deskjet F4185 All in One or any other printer Deskjet F4185 software needed, Pls!

  Hello world

  Can someone help me get a new Deskjet F4185 or any other printer Deskjet F4185 software.

  Your recommendation is much appreciated. Thank you.

  Hello andruanus,

  Take a look at this link.

  HP Deskjet F4185 all-in-One color inkjet - printer / copier / scanner

• Cannot connect my new HP4620 wireless all-in-one printer on my local network

  The printer is aHP 4620 all-in-one wireless printer.  The network is a Linksys Wireless - G Broadband Router connect an old HP Pavilion zv6000. portable 32-bit laptop running Windows XP and my brand new Pavilion dv6-7010us 64-bit running Windows 7.

  First of all, I ran the installation disc for the printer on the Pavilion zv6000.  Wireless Setup went well without any problem the printer connected to the router and to enable printing of thezv6000...  Then, I loaded the printer installation disc in the new Pavilion dv6-7010 and started the installation.  Everything went well until what the installer told me to connect the USB cable between the printer and the computer, and shortly there after that I got an error message an unknown error and that the installation program has been stopped.

  Since then I ran, I think, all the trouble shooting programs recommended with different results, all unsatisfactory.  Right now the test of the last wireless network said that the wireless is on, the wireless works. The connected test did not run.  the major flaw is that the SSID was not found, but there were 5 other networks detected.   The current configuration is: SSID is not set, the Mac address is OK, No IP address is defined, mode of Communication is Infrastructure and Authentication Type is open system.

  Printer is no longer printing of thezv6000.  However the zv6000 both my IPAD become jobs printed via

  HP eprint.  It does not appear that there is something wrong with the printer mainly a configuration problem.   Any suggestion would be

  greatly appreciated.

  Hi Beelzebub2,

  Follow the steps outlined in the document below and let me know what you find?

  "Cannot find the printer" error message on the computer during a wireless network Installation

• Pavilion all-in-one Q214 23: factory restore on the new HP Pavilion all in one computer

  I have a week 6 old Pavilion Desktop all-in-one.  I wanted to do a factory install on it because I had a lot of extra things that I don't want anymore, I installed and I thought what a factory restore would be better.  I went to the HP Recovery Manager and no where in the choices he said 'factory restore '.  He used to have this option in the HP recovery environment.  I checked all the options and nothing on the factory restore.  I made a set of recovery discs, but I always remember that HP still had the opportunity to do a factory restore.  I have tried F11 and F8 and no luck.

  Answers or suggestions will be greatly appreciated.

  Hello

  Thanks for posting in the HP Support forum. Welcome!

  According to the model of the computer, it can not be called exactly the HP system recovery but if your computer is originally shipped with Windows preinstalled 10, recovery partition must be present.

  S ' Please, first manually copy your imporant most of the data on an external partition

  -Follow these instructions here to open the collection from inside Windows

  > > http://www.tenforums.com/tutorials/4130-reset-windows-10-a.html

  > > http://www.tenforums.com/tutorials/4130-reset-windows-10-a.html#option2

  'S called it Reset - Windows Reset with options to RESET the machine as long as the plant (remove all), with an option to "freshen up" Windows and keep personal files.

  Let me know how it goes and if it works for you.

• New 4500 G10n all-in-one

  * beep * thing displays various error messages for the most part about installing the incorrect cartridge... incompatible cartridge, blah, blah... makes me crazy... continually having to restart the computer for straightent it out... fix does not last

  I'm sorry that you have problems with the printer. Here is a link to a document that addresses the mistakes of releases of cartridge for your printer model. It will give other troubleshooting steps to try to correct the error and more restart. I hope this helps. http://goo.GL/mecx7

• (Redirected) New idea for all-in-one

  I have a XPS and considering the alternative.   What I see is a monitor with a dock on the back and a laptop that can be anchored and be used as a counter top can be removed and used as a separate laptop.

  I have not seen something similar, but it would be nice.

  Dandmlo

  Hi dandmlo,

  You can repost this on Ideastorm Dell site, where Dell is looking for new ideas.

  http://www.IdeaStorm.com/

• RE: SCANNING AND RETOUCHING WITH A PRINTER ALL-IN-ONE HP DESKJET 2540.

  I have a new HP 2540 all-in-one printer and it works beautifully! The only thing is that when I scan a document and want to change I can't. This printer does not come with a built-in OCR program?

  Help, please!

  Thank you

  Hello MACUDDLYand welcome to the Forums of HP.

  I see that you have problems editing your scans.  This printer is not equipped with OCR software.  If you are looking to change with OCR software, I would say downloading and using the OCR of third party service.

  Please let me know if you have any other questions.  Thanks for posting on the HP Forums.

• HP Office Jet All in One 6700 wireless print sometimes it works and sometimes it doesn't?

  I have a new HP 6700 all-in-one.  I have a Win 7 desktop pc and a laptop Win 7.  Sometimes I can print from my laptop to 6700 sometimes and not others.  Once it will not print a word doc, next time. same thing for excel.  Cannot do print PDF files and web pages.  I am at a loss?

  Hey, I'm glad I could help!

• 6520: 6520 Setup cartridges do not work in the new printer

  By putting my new cartridges to install in my new 6520, I get the error message 'after the cartridges installation initialization stage does not more' and I have to replace for new.

  I can do that I can use the cartridges - they came new with the printer and I don't want to buy new before printing any page.

  Hey @PBA259,

  Welcome to the Forums of HP Support!

  I understand that during the installation of your new cartridges in your new Photosmart e-all-in-one printer of HP 6520 you get the message that "after that installation initialization phase cartridges cannot be used more» It does not sound like you have a defective set of cartridges of the installation. When you own a printer, as your HP Photosmart camera, they require special configuration cartridges to initialize and preparation of your ink system. If the installed cartridge is damaged, you must go directly to HP to get those replaced with new cartridges of configuration. You cannot buy cartridges installation of the store. Even if you have left and a brand new genuine HP set of cartridges for your printer model, your printer would not complete initial implementation without cartridges installed.

  At this point, because you get this message out of box with your Photosmart HP 6520 I would recommend that contact you the queue of our Support technical telephone to explore ink replacement options.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  Please inform the Technical Support agent of exactly what message you receive on your printer output of the box with cartridges installation. I wish you good luck!

• 7612 HP all-in-One: software OfficeJet Pro 7612 interferes with the LaserJet P1505n

  Since the installation of the software for my new OfficeJet Pro7612 all-in-one, whenever I have print on my next LaserJet P1505n error message appears:

  

  Basic printing product despite the message. The expected state of the LaserJet messages do not seem to appear (for example, the message of the insert to envelopes paper) or double-sided printing instructions.  Manual double-sided printing seems to be unreliable. I uninstalled the 7612 and the problem disappeared. Reinstalled the basice 7612 drivers and he returned. All the solutions to this problem?

  Hey @Joe-TN,.

  @Sunshyn2005 is not in the office today, but I can certainly help you until Sunshyn2005 is back in the office on Monday.

  To clear your Laserjet queues:

  If the P1505n is connected to your printer using a USB cable, remove it.

  Close all other programs that you have open.

  In your search type in printers bar and open devices and printers.

  Right click on all the P1505 listed icons.

  Click on remove the instrument.

  Repeat for all the other icons of the printer listed.

  In your type of Services Research and open Component Services.

  On the left, click Services (Local).

  Right click on on the right print spooler.

  Click on stop.

  Open your drive C:\, then Windows, System 32, coil, and printers.

  Delete everything in this folder.

  Return to the Component Services window.

  Right-click on print spooler.

  Click Start.

  If you removed the USB cable, connect. If this is not the case, click on add printer and follow the prompts to add your queue.

  Please let me know the results after following the above. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Desktop all-in-one PowerPoint

  I have a new HP Pavilion all-in-one desktop computer and want to use it for presentations Powerpoit, but I don't see how to connect it to another screen or data projector.  How the link to the presentation?

  Hello

  Many AIO machines don't have video IN port (s). You need video OUT or ports in order to connect to an external projector. The suite of device (or similar) can do for you:

  http://www.centrecom.com.au/IOGEAR-USB-20-external-DVIVGA-video-card-for-macpc

  Kind regards.