New purchase 55 H50 - no access to Lenovo's Support sites
Hello people,
None of the links included on this new facility will allow to reach any Lenovo's Support site - "site not found".
Warranty service is unable to find all the servers 'security. " I had a hell of a job to even try to post on this Forum - very poorly laid out compared to many other Forums I'm a member of.
Lenovo wants even to talk to their customers?
Can anyone help?
I've already sent an email to my seller asking my money back as the product and its support does until come to zero - even the mouse wheel cannot do a double click on the wheel - no better pilots ca be found!
What a waste of time and money total this excersise was.
Kind regards
George.
P.S. I even upgraded the software 'support' and still no joy - what happens?
Using Chrome as your web browser by default, enabled the link of support at work OK, but still no sign of the server guarantee.
It turns out that my version of the LSC has been later (it has been re-installed, as you suggest), but made no difference.
I made a change to IE (added Lenovo's Support site to the "trusted sites" and with IE11 as default browser, LSC gets supported by links but, of course, no sign of the server guarantee.)
I did make a recording of the warranty when I bought the PC and the grateful e-mail.
Tags: Lenovo Desktops
Similar Questions
-
Have new 4th gen tv apple. Home sharing is on. I'm unable to access my music library on my MAC other than a few titles that have been purchased. How to access my entire music library?
Welcome to the Apple community.
You wonder if you might be looking at the wrong place. You can watch/listen to house content shared app for computers not the music app.
-
My child has its own Apple ID, throughout I would buy apps for her and she would transfer to his iPad. But since a new update she has no access to its power supplies that are on my shopping list. She is using "Video star" app?
Hi Breda49
iTunes purchases (free downloads are taken for granted) are permanently linked to the Apple that was used to buy ID.
To work around this problem, you can set up sharing of family and your child. This will allow you to share all your purchases.
-
How can I get access software Lenovo XClarity administrator demonstration purposes?
Hello
I am a beta tester for Lenovo XClarity administrator for some time now and I am very excitited that this product is now officially announced and available to clients.
I would get the (GA version) of Lenovo XClarity administrator for the demonstration in Sydney, Australia Center and I was wondering how I can get the GA software for evaluation purposes (internal use).
Kind regards
Tim
For Lenovo employees, please contact Charles Weber or Mark Edwards2 for access to the internal FTP site to the GA version.
For all other customers interested in getting the GA of the product XClarity administrator version, please contact your customer account for the purchase/download XClarity teams.
-
Hotmail cannot b viewed, the new computer
I bought a new comp, I can not access my hotmail account on it, but I can you can reach it from other computers
Hi GwenBright,
1. what happens when you try to access the account? You receive messages or error codes?
2. are you facing problems with hotmail account?
If you are facing problems with your hotmail account, you can post your request in the Windows Live forum for assistance:
Hope this information is useful.
-
I want to prevent access to the ' topic: support ' page. How to accomplish this task?
You must create the userContent.css file and possibly the record chrome as well if they do not yet exist.
Note that the names are case-sensitive.- Create the folder chrome (lowercase) in the .default < xxxxxxxx > profile folder if the folder does not exist
- Use a text editor like Notepad to create a file userContent.css (new) in the folder chrome (file name is case sensitive)
- Paste the code into the userContent.css file in the Editor window
- Make sure that you select "All files" and not "text files" when you save the file via "save file as" in the text editor as userContent.css.
Otherwise, Windows can add a hidden .txt file extension and you end up with one does not not userContent.css.txt file
-
New tab page is not refreshed when I delete a site
I have two problems with the new tab page:
- The new tab page will not refresh when I delete a site. I can click on the [X] button to delete a site, but nothing seems to happen. The site remains on the new tab page until I have refresh or reload the page.
- Firefox restores all the sites that I delete the new tab page, the next time that I restart Firefox.
Found the problem:
DOM. Storage.Enabled apparently affects the new tab behavior (bozhe me!)
I had mine set to false; Apparently, it breaks the new tab page. Changing to true restored expected behavior.
Would be nice if the entries in About: Config to http://kb.mozillazine.org/ included a description interconnected how change these options will affect/guy features in Firefox. (And while I'm wishing I join $ 1 million, a pony, and peace in the world). Is life...
Thanks for your help crazyskeggy and Tylerdowner
-
Access to the Windows Update site 0x8024402C error code failed?
Access to the Windows Update site 0x8024402C error code failed? Regds, 'a journey of a thousand miles begins with a first step."
Resolution: 0x8024402C error Code
- Open Internet Explorer.
- On the Tools menu, click Internet Options.
Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.
- Click the Connections tab and click LAN settings, and then click Advanced.
- Remove all the entries in the Exceptions section, and then click OK.
- Close Internet Explorer.
- Click Start, run, type cmd, and then click OK.
- Type the following commands. Press ENTER after each command.
- proxycfg d
- net stop wuauserv
- net start wuauserv
- Try again to install updates.
Windows Vista and Windows Server 2008
- Open Internet Explorer.
- On the Tools menu, click Internet Options.
Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.
- On the Connections tab, click LAN settings, and then click Advanced.
- Remove all the entries in the Exceptions section, and then click OK.
- Close Internet Explorer.
- Click StartThe collapse of this image enlarge this image
, and then type cmd in the box start the search.
- In the list of search results, right-click on Cmd.exe, and then click Run as administrator.The collapse of this image enlarge this image
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
- Type the following commands. Press ENTER after each command.
- netsh winhttp reset proxy
- net stop wuauserv
- net start wuauserv
- Try again to install updates.
Method 2: Enable the option "Automatically detect connection settings" in Internet Explorer to do this, follow these steps:
- Open Internet Explorer.
- On the Tools menu, click Internet Options.
Note If the Tools menu is not available in Internet Explorer, press the ALT key to display the menu.
- On the Connections tab, click LAN settings.
- Click to select her automatically detect settings check box, and then click OK.
- Try to install updates again.
Kind regards
Sohail Patel Regds, 'a journey of a thousand miles begins with a first step." -
Error when trying to access the microsoft update web site
I am using windows XP Pro. SP3 32-bit (build 2600.xpsp_sp3_gdr.100216 - 1514)
I have IE v8.0.6001.18702
When I access the microsoft update web site, I get a message saying that I need to update windows update and I want that allows. No matter what I said or after 30 seconds have elapsed if I do nohting I get the message:
- The instruction at "0 x 08100068" referenced memoery to '0 x 08100068', the memoery could not be "written".
The address is different from one attempt to another, but both are still the same as eachother.
When I close this tab IE grave message box down and I get the message 'recovered tab' normal.
Can I search / install updates using vbscript widely available, or automatic update installation of windows. The problem only occurs when you try to access the web site itself.
I tried to download and install the latest windows update manually, but this does not solve the problem.
I am unaware of the date of the last update because I'm unable to access the update log.
I use a current version of McAfee Anti-virus.
I think my windows is a clean install, but I didn't do it, so I can't be 100% certain.
Jacob
I uninstalled ie8 and found ie7 under him.
I am able to access the site WindowsUpdate using ie7.
Jacob
-
Unable to access the Windows Update Web site.
When you try to access the Microsoft Windows Update site, the following occurs. the Web page that says "checking to see if you have the latest version of..." "is displayed briefly. It is immediately replaced by a page of information. This has "[error number: 0x800A0005] the website has encountered a problem and cannot display the page you are trying to display." The options provided below may help you solve the problem,"with the other possibilities in clickable (I went through them but nothing helped...
I tried Microsoft FixIt Center, but all she could do is to tell me that "necessary attachment components" but not which.
I also tried to reset Windows Update components according to the instructions on "http://support.microsoft.com/kb/971058".. .no luck.
I am running XPPro SP3 IE8.
Symantec Endpoint Protection version 11.0.7101.1056.
Any help much appreciated.
Hello
Perform the steps mentioned below and check if that helps:
Method 1
Check if the Windows Update Service is selected as a starting point.
To do this, follow these steps:
1. on Start, run and type services.msc in the Open box, and then click OK.
In services.msc find the automatic updates service and double-click it.
1. click on the tab log and ensure that the "Local System account" is selected for the account logon and the box "Allow service to interact with desktop" is DISABLED.
2. in the hardware profile sectionin the log tab, check that the service is activated.
3. on the general tab, the Startup Type should be Automatic, otherwise, the drop-down list box and select automatic.
4. under "Status of Service" under the general tab, the service must be started, click the Start button enable.Repeat the above steps for the service "BITS Background Intelligent Transfer Service ()".
Method 2:
You can also re - register dll in Windows Update.
To do this, follow these steps:
1. Start, run, type CMD and click ok
2. in the black command window, type the following command and press enterREGSVR32 WUAPI. DLL
Wait until you receive the "DllRegisterServer in WUAPI. DLL succeeded"message and click OK."
* Repeat the same step for each of the following commands:
REGSVR32 WUAUENG. DLL
REGSVR32 WUAUENG1. DLL
REGSVR32 ATL. DLL
REGSVR32 WUCLTUI. DLL
REGSVR32 STINKS. DLL
REGSVR32 WUPS2. DLL
REGSVR32 WUWEB. DLLMethod 3:
Delete the corrupted Windows Update files. To do this, follow these steps:
a. at the command prompt, type the following command and press enter
net stop WuAuServ
b. at the command prompt,
type cd %windir% , and then press enter
c. in the opened folder, type the following command and press ENTER to rename the Software Distribution folder
Ren C:\Windows\SoftwareDistribution SD_OLD
d. restart the Windows Update Service by typing the following at the command prompt
net start WuAuServ
Type Exit and press ENTER to close the command prompt.
e. restart the computer and check if you have a similar question.
For reference:You can access the event viewer on your computer and check the newspaper of windows for messages/error codes important related to the question and after return from errors in the event viewer.
See the link below for more details:
What are the information contained in the logs of the event (Event Viewer)?
http://support.Microsoft.com/kb/308427
Let us know if it helps.
-
Malwarebytes 'has managed to block access to potentially malicious Web site.
Hello
Did someone have the problem I, m very experience regularly I run win 7 Home Edition and constantly I, m getting this message.
I use utorrent to my D/L without any problem at all, but this message on my T/Bar. I regularly run the Malwarebytes Anti Malware to make sure that my pc is not infected message is... Malwarebytes 'has managed to block access to potentially malicious Web site... " Type the incoming port is and treat: utorrent. can exe I ask for your help to remove this annoying message.
Thank you
DennisHi Dennis!
I suggest that check you the answers here: http://www.malwarebytes.org/support/consumer/
See you soon
Julia -
WebVPN - error: access method is not supported for the capture of WebVPN
I'm watching a capture of webvpn on the SAA. I start the capture:
test type webvpn user capture
(entering a valid user name) Then I connect to the ASA to try to see track with "Using a browser to capture displayed data" as described in the setup guide.
https://
/ admin/capture/test/OCAP After login, I get this message in the browser:
"Error: access method is not supported for WebVPN capture."
If I stop the capture (capture test) before you try to connect, the error in the browser is:
"404 not found".
The/admin/capture/test/OCAP requested URL was not found on this server. "
Any ideas greatly appreciated. Thank you!
After some research, I finally found it
DOC: Webvpn catches are recorded only in zip format
Symptom:
WebVPN captures are only saved in zip format.
Conditions:
According to the following doc:
http://www.Cisco.com/en/us/docs/security/ASA/asa82/configuration/guide/WebVPN.html#wp1153077
WebVPN captures can be recovered in the pcap format using the browser, which is incorrect. The document must be corrected.
Workaround solution:
N/A
Thank you for your time and cooperation
Portu.
In case you have any other questions please note all useful messages and mark this question as answered
-
How to configure IIS6 on windows 7 to allow access to the default Web site or there at - there someone out there who can put up my computer at a reasonable rate of legend
Hello
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads
-
I installed a new game for Pc windows 7 & I got the support of the United Nations, is at - it software to install to run all the games correctly?
All games (or programs) are compatible with Windows 7. See the Web site of the Publisher of games for compatibility information.
Windows 7 has compatibility mode that peuvent leave some older games that would be otherwise incompatible for work. Please see:
http://windows.microsoft.com/en-US/windows7/Make-older-programs-run-in-this-version-of-Windows .
Very old games can contain 16 cold bits that will not work if you have 64-bit Windows 7 without Virtualization software.
What is the name of the game?
Are you using windows 7 32 or 64-Bit? *
* To see if you're running 32-bit or 64-Bit Windows click:
Start-> Control Panel-> system
Then look at where it says, "System Type".
-
No access to a knowledge base on the Support site. Help, please.
I get the following when I try to access any database knowledge, even when connected to the Support site.
I had to re-application for access to CSI and after that things started working fine.
Maybe you are looking for
-
10.11.4 updated icloud mail do not sync
After the 10.11.4 update, iCloud mail is synchronization is no longer on my iMac. I have enabled email preferences iCloud, logged on and in, rebooted, nothing works. Yes, I checked the status, and it is green. Now what?
-
My Safari tabs opened by other devices will not update
I have tabs open other IOS and devices Mac OS and they will not regenerate on my Mac. Is it possible to update manually? No idea why it cannot be auto refreshing/getting updated? Thank you.
-
Re: Canvio external HARD disk. What is the preloaded software?
Just installed this unit of 500 GB and there are two files pre-installed on it. One, "autorun" to 34 bytes and the second 'software offers"to 15.6 MB. Autorun does not work and software offer is just a screen that looks like its intended to show the
-
Is it possible to enumerate devices by PCI properties, HAVE / AO?
I asked this in the CVI forum yesterday, but there are probably more people who know NIDAQmx here. Reason: I would like to program my application to use some HAVE and AO, he can find on a CompactDAQ chassis. It is the 4th update to this app in 20 yea
-
HP LaserJet P1102w &; Wireless Mountain Lion
I just bought a new HP LaserJet P1102w and cannot connect it via radio to my Mac at all. I am running Mac OS 10.8 with the latest software updates. I already downloaded and installed the latest software and firmware directly from the HP site. I can't