WebVPN - error: access method is not supported for the capture of WebVPN

Similar Questions

• VixDiskLib_Cleanup always returns vixError (6) - the operation is not supported for the specified parameters

  Any ideas how we can determine what parameters it dislikes?  I am the appellant after VixDiskLib_Disconnect as recomment docs and using the same connection params struct I used with VixDiskLib_ConnectEx.

  Thank you

  -Ron

  UInt32 numCleanedUp = 0, numRemaining = 0;

  /= VDDK 1.1 header says connection spec should be null =/.

  connectParamsP - & gt; vmxSpec = (char *) NULL;

  vixError = VixDiskLib_Cleanup (connectParamsP, & numCleanedUp, & numRemaining);

  vixError (6) - the operation is not supported for the specified parameters

  Ron,

  I think that your connection is probably not use all transport advanced, in which case _Cleanup does nothing. If you connect without using advanced transport, cleaning returns 6 - there is nothing to clean up.

  Thank you

  Annick

• Error - the computer is running an operating system Microsoft Dynamics CRM does not support for the installation of the Extension of reporting Dynamics CRM 2011.

  Original title: Dynamics CRM 2011 Extension of reporting facility.

  Nice day

  Asked me to install this program called Extension Microsoft Dynamics CRM 2011 report Authoring on one of our PC network operations.  The computer is a Dell OptiPlex 960 under Windows XP SP3.  When attempting to install the program, you get the following error message:

  The computer is running an operating system Microsoft Dynamics CRM does not support.  To install this product, you need to upgrade your computer to an operating system supported.  For a complete list of supported operating systems, see the documentation for Microsoft Dynamics CRM (http://go.microsoft.com/fwlink/?LinkID=181018)
  For additional detals see logfile C:\Documents and Settings\bcodom\Application Data\Microsoft\MSCRM\Logs\BIDSExtensionsSetup.log

  Now, normally, I just coordinates with the end-user to him upgrade to Windows 7, however, after watching on the download page of this application (http://www.microsoft.com/download/en/details.aspx?id=13818), I noticed that Windows XP is one of the supported operating systems that can be installed on.  In addition, after looking around on the Technet documentation, I was not given a definitive answer on whether or not this application is not supported on Windows XP.

  So, my question is creation of Microsoft Dynamics CRM 2011 report Extension works on Windows XP SP3, or do we let us upgrade this computer to Windows 7?  Thank you!

  Hi Bcodom,

  In dealing with the problem to install the Extension of Microsoft Dynamics CRM 2011 report creation, I would recommend you to post your question in the help link.

  http://social.Microsoft.com/forums/en/CRM/threads

  Hope the helps of information.

• VMkernel journal peripheral qualifier suggests 0 x 1 errors not supported for the MD3000i railways

  I have a vSphere cluster connected to the MD3000i and its configured by the book on two different subnets for each port on each controller. Robin is enabled for multi pahing on VC.

  That's what I see in newspaper vmkernel

  21 sep 16:19:29 db-esx2 vmkernel: 6:04:15:02.613 cpu4:6882) ScsiScan: 839: Path 'vmhba33:C0:T0:L0': seller: "DELL" model: Rev 'MD3000i': '0735' "»

  21 sep 16:19:29 db-esx2 vmkernel: 6:04:15:02.613 cpu4:6882) ScsiScan: 842: Path "vmhba33:C0:T0:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)

  21 sep 16:19:29 db-esx2 vmkernel: 6:04:15:02.613 cpu4:6882) ScsiScan: 105: path 'vmhba33:C0:T0:L0': peripheral qualifier 0 x 1 not supported

  21 sep 16:19:29 db-esx2 vmkernel: 6:04:15:02.618 cpu4:6882) ScsiScan: 839: Path 'vmhba33:C1:T0:L0': seller: "DELL" model: Rev 'MD3000i': '0735' "»

  21 sep 16:19:29 db-esx2 vmkernel: 6:04:15:02.618 cpu4:6882) ScsiScan: 842: Path "vmhba33:C1:T0:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)

  21 sep 16:19:29 db-esx2 vmkernel: 6:04:15:02.618 cpu4:6882) ScsiScan: 105: path 'vmhba33:C1:T0:L0': peripheral qualifier 0 x 1 not supported

  21 sep 16:19:29 db-esx2 vmkernel: 6:04:15:02.623 cpu4:6882) ScsiScan: 839: Path 'vmhba33:C2:T0:L0': seller: "DELL" model: Rev 'MD3000i': '0735' "»

  21 sep 16:19:29 db-esx2 vmkernel: 6:04:15:02.623 cpu4:6882) ScsiScan: 842: Path "vmhba33:C2:T0:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)

  21 sep 16:19:29 db-esx2 vmkernel: 6:04:15:02.623 cpu4:6882) ScsiScan: 105: path 'vmhba33:C2:T0:L0': peripheral qualifier 0 x 1 not supported

  21 sep 16:19:29 db-esx2 vmkernel: 6:04:15:02.628 cpu4:6882) ScsiScan: 839: Path 'vmhba33:C3:T0:L0': seller: "DELL" model: Rev 'MD3000i': '0735' "»

  21 sep 16:19:29 db-esx2 vmkernel: 6:04:15:02.628 cpu4:6882) ScsiScan: 842: Path "vmhba33:C3:T0:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)

  21 sep 16:19:29 db-esx2 vmkernel: 6:04:15:02.628 cpu4:6882) ScsiScan: 105: path 'vmhba33:C3:T0:L0': peripheral qualifier 0 x 1 not supported

  I see this on the two hosts vmkernel journal...

  should I be worried. "This isn't necesserely showing error but:" device qualifier 0 x 1 not supported "gets my attention.

  If you have NOT of LUNS assigned as Lun0 then you will get this error.   So always start with LUN Lun0 aka: Lun0 - first record entrust you, Lun1 - second disc etc.  You have not neccessarly to reallocate your currently lun, you could create a new lun and presenting it as Lun 0.     So try that if you are able to create a new Lun.   Otherwise if you have existing virtual machines running on the current Lun5 you would have to stop them, being cancelled at them in inventory, change the Monday from 5 to 0 and then re-record their I think.    Also, make sure that you do not jump also any number of LUNs... aka go Lun0, Lun1 and Lun2 Lun3 etc.

• I get "mime type or video format is not supported" for the sons of live webcams. What should I download to fix this problem?

  I'm not a COMPUTER expert. I get: "mime or video format type is not supported" as a message on a webcam live feed Web site: chaturbate. What should I download to fix this problem?

  Thank you

  Collin

  Flow cam I looked all used Adobe Flash Player.

  Flash appears as a plugin installed in your system details.

• I want to buy the adobe acrobat reader DC subscription. but when I click on the subscription link it says that my country is not supported for the subscription. So how can I buy the subscription? Please suggest

  Dear all,

  I want to buy the subscription CD Player Adobe Acrobat, but when I click on the subscription link and it says that my country is not in charge of this subscription.

  Is there anyway to buy this subscription? kindly ask you to suggest solutions for the same.

  Kind regards

  PS

  However, subscriptions are available only in some countries, it is true.

• BIOS error 104: network card not supported after the update of the bios, HP G60

  Recently, my hard drive has begun to fail. I bought a new drive, installed a Windows 7 ISO on a flash drive, installed etc. I have a HP G60-237NR. I have reinstall everything, and then I went to the page of the drivers for my laptop. I started to install stuff, at that time there I was bored so I'd sort of from the bottom to the top if this order of the questions, I can give more details on that if I need to. I downloaded the BIOS update, because I thought that "good, he he listed for my computer, I have no doubt it needs to be updated since my laptop like 6 years. Flashed the BIOS, my computer shut down and restart didn't like I thought he was supposed to. I turned on and well 'device 104 - unsupported of detected wireless network. System stopped. Remove device and restart. "I tried to find out what to do, which told me to remove the network adapter, the bios downgrade, plug it back and you're good. Well, I unplugged my network card and the snap-snap-in two sons who attaches and restarted, he did all the stuff. I got the same error. EDIT: I meant I plugged my network back in, but still got the error. Where I had the clichés about evil, I passed the clichés and double checked the connections maps, but still nothing. Everything I found said that should have worked, I'm on the same version of the BIOS, I started with that, but it does not recognize my network card. What am I doing here? Please help, thanks.

  Hello
  
  When you have the outside wireless card, you have the error?
  
  If this isn't the case, then you can get necessary to replace the wireless adapter. I would not be able to explain how, but something may have cause to fail.
  
  You can find maps of replacement of support on page 16 Chapter 4 of the Guide Service and Maintenance for your laptop.
  
  I hope this helps.

• Method is not defined for the type

  What I'm doing wrong here?
  

  public void testArray(Test2[] tarray){
            for(Test2 t : tarray){
                 System.out.println(t);
            }
  
  //...//
  
  Test2[] passArray = new Test2[4];
  testArray(passArray);  // error: Method testArray(Test2[]) is undefined for type Test.

  Also, for future use, how I format the code for this forum so that it was indented appropriate and easier to read? Thank you.
  
  Published by: 837443 on February 26, 2011 11:43

  837443 wrote:
  testArray() is a public method. So why should I specify the class that she comes?

  Because it is "static". Static methods belong to the class, not in an instance. And even if it wasn't, you'd still have to provide an instance name.

  Winston

• Access-list command not supported in the 2.2 FWSM (1)

  Hi Netpros

  I am facing a strange problem with one of my FWSM installed in my spare box 7609.

  I have a FWSM installed in live production network, in which the caught watch access list supported and I am able to set up their place, but in the alternative box, I am unable to do so when I have? to get the command supported, it doesn't either up the access-list command.

  The two boxes run upward with 2.2 (1) and on different 7609 boxes.

  Basically, I want to do the CLI or the tested features up to in my box of spare before you go and implement the same on the live production network.

  I have attached both the version of the show, but also the supporting documents.

  Pls do not help to find where I m lack somehting here :-(.

  regds

  Your spare module is configured in mode 'multiple context', where you can create up to 100 logical firewall within one FWSM. In this mode, when you the meeting into the FWSM, you enter in what we call the context of the system in which all you can do is set the other contexts. In the context of the system there is no notion of the lists of access or something like that, and that's why you can't see these commands you.

  You want to deliver the FWSM in unique context mode by running the command:

  simple mode

  Reboot and then when he comes back to the top you'll be good to go.

• Photoshop elements 13 does not support for the Nikon D750 NEF files

  I just bought a Nikon D750 (July) and I am running a trial of Photoshop elements 13 for quick treatment, but even after the updates and updated RAW it will not open the NEF files, which is supposed to be supported?

  Thanks for your reply, I discovered the problem and it was an older version of Nikon Transfer installed, used with the old camera, updated for Nikon NX - i with Nikon Transfer 2 built in and the files are now transferred to the computer correctly.

• Error - exception error not supported for user - Help!

  Hi all

  I get an exception error unsupported to the user in a part of my page is refreshed after encountering a validation error.  Validation is managed properly, but when the page is refreshed to display I get an exception error not support for the user for the following code (generates the value of the element on the page):

  < code >

  Select nvl (sum (po_details.po_det_amt), 0)

  of po_details

  where po_details.po_id =: P230_PO_ID

  and po_details.wbs in (select distinct wbs_number_id of wbs, project

  where wbs.vendor_id =: P230_VENDOR

  and substr (wbs.wbs_number_id, 1, 6) = project.wbs_sequence

  and project.project_number = nvl (:F101_FPC_NUMBER,project.project_number));

  < code >

  When the code retrieves a single value, the following post calculation calculation of:

  < code >

  to_char(:P230_PO_AMT_FPC,'FML999G999G999G999G990D00');

  < code >

  Generally, the process works.  It is only when a validation run which prevents the removal of a purchase order that I encounter an error during a refresh of the page.  I get an exception error unsupported to the user for this calculation.  I'm puzzled.

  Any ideas?

  to_char(:P230_PO_AMT_FPC,'FML999G999G999G999G990D00');

  AFAIK - all within the APEX bind variables are of type VARCHAR2

  That means - you are implicitly expressing a string to a different data type just to cast to a string.

  So: this code is completely useless and adds more complication to the mix only what you need.

  It is very possible that Oracle is trying to convert a DATE... (which will fail)

  I put either the FORMAT for the type of element to match what you need or make the conversion from the string in your SELECT statement.

  for example

  Select to_char (nvl (sum (...), 0), "FML999G999G999G999G990D00")

  If you still get a 'user defined error', it is likely to be lifted since within the procedure used to remove the PO.

  See the DEBUGGING within the APEX pages to check exactly where the error is thrown.

  (it sounded like you already did and have reduced in to_char() section)

  MK

• Error "operations is not supported on the object." when importing .ovf in the vCloud Director 5.5 machine

  I am trying to import a virtual machine (composed of three .mf, hard, .ovf files), when I try to download the VM, it gets downloaded 100% in the catalogs, but gives an error "Cannot create" as condition to the end and when I check the error in detail, it gives me that "operations is not supported on the object.". Checked the Virtaul Center, I get the same error that 'operations is not supported on the object."in the taskbar. Google it a lot but could not find a relevant solution.

  Just for the record I have DRS activated in full auto mode and only in the aggressive State.

  Can someone help me what I can do to remedy the problem.

  There are two parts to the upload.

  5.5 download dialog box represents the progression to the record of transfer vCloud Director of the FVO.  The download method is via the integration of Client plug-in (which uses the OVF tool).

  If the pop-up window can 100% success, I think that the element of the catalogue shows 50% and tries to download files to vCenter/ESXi as an import job.  If the import job fails, then you need to investigate the newspapers of vCenter/ESXi side for more details.

• LabVIEW does not support for NI-DAQmx.

  Hello fellow programmers.

  I am an absolute beginner with LabVIEW and I have the problem that even if I installed the latest versions of the NOR-DAQmx (9.7.5) driver and LabVIEW (2013) I get the error message "LabVIEW does not support for NOR-DAQmx. Please reinstall.

  I created a task in the NOT-MAX. According to the tutorial now there should be an element in LabVIEW under "Measure i/o", but it is not. I carried the task via drag & drop in the block diagram, but when I want to turn in code, I get the above message.

  Operating system: Windows XP SP3

  Any suggestions?

  Thanks in advance

  Laura

  crossrulz,

  Thank you for your response. Well, I installed the latest version of NOR-DAQmx (9.8) and this time I also installed packages for the former executives etc and now it works.

• Firefox mobile not supported for lg optimus zip

  Hello, I have recently switched to straight talk and was sad to find that firefox mobile is not supported for the lg optimus zip. In the future, I hope that this will change.

  Hello moon_serenity, firefox does not work on your device because it has to little memory RAM (150 MB instead of the 384 needed for firefox to run). in the past there has been efforts to make firefox on android race on more than low-end devices, but the 384 seem to be the background limit which was concluded in which is possible to achieve. If I am afraid that there will be no way to make firefox run on the lg optimus zip.

  https://www.Mozilla.org/Firefox/mobile/platforms/

• Rate Audio not supported in the file. HELP PLZ

  I'm far from being comfortable with all programs of this type, so please bear with me. I am doing a slideshow for my Peewee team and I'm up to the wire to it. I bought PE4 in an attempt to open some options for our slideshows (my wife has already used Roxio but I wasn't happy with it). I'm trying to take a video that I've transferred from VHS to DVD using a Magnavox dubbing system. I am trying to take the video of the dvd and put it in PE4, so that I can put music on the video (the things in the crowd were not always things that grade 5 students should hear when they look at their video of the season). I succumbed to the import of files in PE4. I always get the same error message: "audio rate not supported in the file. I tried to convert the dvd to AVI using "Next Video Converter 3.0" and even "DVD Shrink 3.2" & "AutoGK".» I even tried to convert it to AVI using NVR and leaving out of the audio file. I still get the same message. Please someone help me with this. I am against the ropes here, and I don't want to disappoint my boys.

  I tried to find help by reading some of the other posts here, but to be honest that I was not able to make heads or tails of any of them. I don't really understand this kind of thing, and when people start talking about codecs etc, this is no logic for me. Any help in plain English would be appreciated.

  Thanks,-Rsvl Jedi

  The challenge is that these VHS to DVD dubbing sometimes systems use codecs (compression systems) for their video and audio that don't Digest well in programs such as Premiere Elements.

  The simplest solution is to convert DVD files (which are the VOBs) to DV - AVI using a program called MPEG Streamclip. Instructions where to find it and what are the settings to use in the FAQ on the right of this forum.

  http://forums.Adobe.com/thread/415317?TSTART=0

  A much simpler way to do this, is to let the DVD on the move of the VHS to digital completely. You can do this by using a device called a DV bridge. You plug your camcorder VHS or player inside and it connects (via FireWire) on your computer. The files it creates on your computer are DV - AVI, the ideal format for editing in Premiere Elements.

  I recommend the ADS Pyro AV Link. It sells for less than $150, and it will be more profitable for itself in a few weeks, if you do this kind of dubbing VHS regularly. The FAQ have more information about it and other DV devices. (Do not use cheaper scanners, like the Dazzle unit, incidentally. It only will lead to more headaches.)

  http://forums.Adobe.com/thread/431853?TSTART=0