NIC Vista 2 goes to 2 networks

Similar Questions

• Cannot open and view the files on a Vista Home Premium 32-bit networking machine

  My laptop running Vista Home 32-bit pre SP2 has been networked with my desktop running XP V2002 Pro SP 3 for a long time.  Until recently, the files were shared back without problem.  After a Windows Update, a few days ago my Vista machine keep gel.  After a diagnosis, I have disabled some startup software Google and McAfee and services programs and did a system restore to March 31 to resolve the problem of gel.   However, I can't restore the capacity on the laptop of Vista file sharing.  This Vista laptop is able to ping the XP machine and see and access the files on the XP machine.  But the XP machine can't Ping the Vista laptop (application expires) and when you click on the list of the Vista laptop for the task force on the XP machine, it gives the error message \\Laptop is not accessible.  You might not have permission to use this network resource.  Contact the administrator of this server to find out if you have access permissions.  The network path was not found. I tried various fixes suggested.  All have failed. (1) turned power off the modem cable & wireless router, restarted and connected the modem and router computers in after the computer restarted. (2) Turned off all 3rd party software and even restarted the laptop Vista in safe mode with network.  Could not even Ping the laptop of Vista on the XP machine or access the notebook icon in the Working Group in MyNetwork places. (3) Made that exception file sharing and printer is selected in the Windows Firewall settings. (4) checking network and sharing Center.  Discovery of the network, file sharing, sharing public folders, & Printer Sharing set on "On".  Sharing still protected by password set to 'Off '. (5) group named network WORKING Group on both machines. (6) the fact that individual records are always set to 'share '. (7) in the properties of wireless network connections, Internet Protocol Version 6 (TCP/IPv6) has been disabled. (8) has a netsh winsock reset on the Vista laptop.   Am I missing something else? This problem would go away if I have upgraded from Vista to Windows 7 on the laptop / Windows 7 can network with a XP Pro machine? Thanks to all those who have ideas on what the problem may be.

  Hello

  I appreciate the effort you have put in to solve the problem.

  I suggest you review the process in the document to ensure that nothing is missed.

  Link: Sharing files and printers in Windows Vista: http://technet.microsoft.com/en-us/library/bb727037.aspx

• peut vista premium on the same network home with an o/s of windows7 with a printer between pc Desktop 4, s

  I have 4 pc desktop 1 hp photosmart printer 3 PCs are windows vista premium 1pc is windows7 premium I can't seem to configure them together on the same network support;

  Hello

  Read these

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  setting up a network home

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  Vista File and Printer Sharing.

• Vista continues to lose a network printer

  I have a computer with Vista home premium (32 bit) networked through a router to a printer (Epson DX4400) on a second computer running Windows 7 Professional (64 bit).

  The network seems to work fine, I can see and access shared folders on the other machine), but whenever the vista computer is restarted the printer must be reinstalled on the subject from scratch. The computer can still not see the printer through the Add Printer Wizard and I have to use the "printer not listed option" in the wizard.

  Someone at - it ideas?

  Thank you.

  Hey MarkMc

  Step 1

  I first suggest you to uninstall the drivers and connect the printer locally on the Windows Vista-based computer. Then install the drivers and check if it works fine after restarting the computer. If the connection is intact and if the printer is visible after restarting the computer, you can connect to Windows 7 computer and reinstall network site Web Epson printer drivers.

  Step 2

  Access the link below and download the latest drivers for your printer and install and check if it helps.

  http://eSupport.Epson-Europe.com/ProductHome.aspx?LNG=en-GB&data=lkuCfcvA9czYMwB+2i0olQuJG2hW2FWdwbHRlVgU002Fu18U003D&TC=6

  Step 3

  You can remove or remove all the other printer installed on your Windows Vista computer and reinstall the drivers for your Epson DX 4400 and check if it helps.

  Step 4

  Check if you have any firewall is enabled on your router and try to temporarily disable the firewall of the router and check if that helps you solve the problem. If it works fine after you turn off the firewall, you can contact the router manufacturer to check if you need to change the settings of the router. Later, re-enable the firewall after verification.

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista not seeing PC on network

  My network is connected to a WRT54GS, before I had a wired version not wireless I could see the end network. Now with the WRT54GS I see her, I can ping, internet access, print to the network printer, and others with XP can see my vista PC. It is a pain if I need to transfer files that I have to go to other machines. All are on the same workgroup, all can ping, internet access and network. In short, everything works fine, but I do not see the network. Just my PC no other PC or printers, and discovery is enabled and set to the private sector. All suggestions will be useful. I've changed the settings in the router and the PC but no luck.

  Mark

  I want to thank everyone for help with this problem after watching on the other PC's I saw my mistake is the firewall blocking, it goes back to say oops 'seek first the basic stuff. " But I can see all my vista PC network

  Thank you

  Mark

  NightRider RV Inc.

  www.nightriderrv.com

• Vista will not display the network icon in the Notification area.

  IM my notification area network icon disappeared, and when I go to the right click > properties > Notification area to try to solve this problem, the check box on the notification tab, because the network is grayed and I can't click on it.  Vista has done this before with the icon of power, but it seemed to resolve itself. It has been a few days and a few reboots now, however, and the problem persists. What can I do to try to solve this problem?

  Hello

  There are different ways to fix it

  read all the information on the link below

  _______________________________________________

  Try Method 3 method 1 does not apply to you

  ________________________________________________

  Method 1. :

  1. right click on the taskbar and click Properties.

  2 tab Area of Notification .

  3 check the (on) or disable (off) the options you want or do not want to display on the Taskbar Notification area

  Method of reading 3 etc. in the link below

  How to enable or disable the Notification area system icons in Vista

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  _________________________________________________________________

  or try this

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Windows Vista Business 64 bit no network connection

  I installed the 5.0.0.04 for 64-bit Cisco VPN client and it worked perfectly. I power down my machine and when I turned back the next day the network connection just stopped working. Is really weird, when I go to the network adapter I see no error or anything, nothing shows no more on the event viewer. The hardware Manager shows the network adapter works, but on the systray I see the icon of the unplugged network cable and I am unable to connect to any network, I can't get an IP address any or anything. If I go to the network adapters, I see the map connected and everything, but I can't get an IP address, it shows as not connected. I already checked with another computer and the router and the network cable work. This crazy. I have already uninstalled the Cisco VPN client, updated the NIC drivers and firmware and restarted the machine in safe mode but nothing seems to work.

  I appreciate your help

  Thank you

  Hi RobertoGuzman®,
   
  Here are some articles that deal with this issue. Follow the steps in these articles of Association to solve this problem:
   
  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
   
  Failed to get the IP address on a Vista machine - here are steps to debug

• Laptop wireless with NETGEAR router Home Windows Vista detects on the local network and internet

  We have a laptop Toshiba Satellite L505-S6946 with Windows Vista on it. We bought a router Netgear Wireless G WGR614V10 a few months ago and installed ok. It worked fine for a few months. Now the network connection to the bottom rhs shows tray icon: 'Local only' for the connection of the SSID, we have implemented. Technical support Netgear has determined that the router works fine. But they noted that the router might get a static IP address in his settings of the adapter wireless Vista. And they said that something should be changed in Vista to a direct connection with the modem works fine for internet access, but it's bulky. Someone please do you suggest to fix this error? Thank you!!!

  Hello

  A message in the small window that says connected wireless does not mean that you really have a valid functional connection.

  Linking the means of router you can enter the IP base of the router in an address bar in one go, being able to connect, see and configure the router menus (extended to the wireless router manual should explain how to do).

  If it will not connect to your wireless router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  ----------------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Firewall software can block traffic Local to the network that you are trying to use because it is not set to the network Zone Trust.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP (network IP number) of work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• How we prevent machines hibernation, off NIC Vista power management features and turn off USB devices, a company?

  Running XP and Vista SP2 clients under a forest of 15:00 2 K; However, we will migrate away XP completely. I found a number of topics on the Hueristics key in the HKLM\System\CCS\Control\SessionMgr\Power, the PnPCapabilities key on each NIC being equal to 30 or 38 (can't seem to find what it should be set on for Vista although both seem to work) and the command, powercfg h but I lack severely in the implementation of all In addition it takes on the USB bus issues. I have written a vbs script that handles the networking with absolute success, at the start of the workstation, but I have problems getting anything else to play at the same time. Any help would be appreciated! Thank you! -Josh

  This question is a bit Advanced for Windows answers Forum and is more appropriate in the Technet Forums:http://social.technet.microsoft.com/Forums/en-us/itprovistadeployment/threads where the more technical issues of Vista specialists will be happy to help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Vista home premium-32-bit network share problem

  I have a laptop and a desktop pc

  my laptop using windows vista family premium 32 bit and my desktop pc using windows 7 ultimate 32 bit

  After that, I want to my computer and the laptop via a cable LAN file sharing.

  I have this Setup:

  -network discovery on

  -file sharing: on

  -Firewall exception: file & printer sharing

  -the name of workgroup: LAN

  -V4 IP: 200.200.200.1

  -password file sharing: off

  -authorization @ file sharing (file > properties > sharing > permission)

  After posting to my network (from desktop PC) my notebook, network connection was detected detect connection to network local but written unidentified network. and when I click on the file that I share.

  you don't have permission to acces\\notebook_dell (name of my computer) \d (part of the hard drive i; m action). Contact your network administrator to obtain access

  but seen from my laptop to access my desktop like this pc:

  When I click from my laptop

  "check the spelling of the name. otherwise, there could be a problem with your network. to try, to idetify your problem and solve it click diagnosis. I click on the diagnosis, but it does not work well...

  What can I do after that?

  Your TCP/IP settings does not seem right to me - which is not among the order for a private network numbers.  Maybe that's why you're having problems.  Also, it seems that you have enabled permissions so perhaps that's why you have an access problem (you may not be the configuration of permissions on both machines for users of the other machine).  It is difficult to tell what you have provided - there are many other settings and I'm not sure of what you have done with all of them.

  Here is an article on how set up a network of hone (for example just a connection cable) - there are a lot of links with the right information so check everything to make sure you use the appropriate procedures and settings and cables:http://compnetworking.about.com/cs/homenetworking/a/homenetguide.htm.

  Here is another article on how to set up a network home using a LAN cable and it goes into the correct TCP/IP addresses as well as other requirements.  This is a good, a very comprehensive article that can help you put up or help you find what stage you are missing or what you're doing wrong: http://www.astahost.com/info.php/tutorial-pc-pc-home-networking_t14018.html.

  Please read both of these articles and then set up a completely new connection using what you have learned and see if that helps.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• NIC Vista guest operating system does not work

  I am running VMware Workstation 5.5.5 build-56455, on a Win XP Pro host system.

  I just installed Windows Vista business as a guest operating system, but I can't get the network to work.

  How to make this work?

  The 'real' my Dell workstation NIC is a Broadcom NetXtreme 57xx Gigabit Controller, if it is relevant at all.

  Concerning

  MazH

  It seems that the virtual NETWORK adapter is not installed on the client, otherwise, you would see an adapter in the comments "ipconfig" with an APIPA address.

  Install the VMware tools in the comments (you always do). It contains the correctdrivers for the virtual card.

  AWo

  VCP / VMware vEXPERT 2009

• MacBook Pro going on my Network Configuration

  Nice day

  21/04/2016

  I printed a Test Page from my Samsung printer Laser and this network setup page printed on my MacBook Pro Login password in its entirety.  How can this be?  Anyone can print a test page from my printer and know Login password for my Mac.  I also noticed that the following items have been disabled and I was wondering if this is related to my password appears.

  IP - disabled (Protocol IPSec) security information

  Filtering IP - disabled (IPv4 filtering) (filtering IPv6) information

  Information filtering MAC - disabled (Mac filtering)

  Please someone help because it makes me vulnerable to someone steal my password and maybe yours.

  Thanks in advance...

  How do you print a test page? The test page does not print your password for the computer. If your printer is connected to your local network router are you sure that it does not simply print the ssid. The info you have posted does not affect printing any password, nor is he compromising safety.

• Satellite Pro A200 with Vista is not another mobile network XP

  I have the Satellite Pro A200 Toshiba and I have some problems with the network.
  The Inernet is upp and go, but I can't find the other computers on my network.

  Im having 3 other computers on the network. The A200 is having Vista and the other has just XP - pro and XP-Home Edition.
  The network of the stand-alone tree works well but the laptop is not present in the network.

  I have checked the task force if it even.
  Y at - it anyhone who is having an idea how or what is the problem?

  Have you tried to use the option of network discovery in network and sharing Center?

• Vista PC and a cable network.

  Hi, I had a wired network with 3 pc is running XP, no problem, but the main computer, mine, gave the soul so I bought a new Vista PC.

  I plugged it all this, but now 2 other PCs do not have access to the media and files etc on my Vista pc, even if the pc XP appear on the network on the Vista pc page. Vista doesn't seem to be able to set up a wireless network. Y at - it sort of have a wired network like it, for me, using vista is more secure than wireless.

  Concerning

  Dave

  Hello

  Check out this thread, it will show you how do...

  [ http://h30434.www3.hp.com/psg/board/message?board.id=OS & message.id 1923 = & query.id = 401115 #M1923 ]

• Vista installation goes into sleep mode

  Hello
  I tried a full restore using the recovery discs. Everything's fine until it gets to install Vista - then he goes to sleep. I tried several times and it stops at different stages - steps 2, 3 or 4 usually.

  Any help gratefully accepted.

  Hello

  It's very interesting question (AC adapter is plugged?). I never heard about it as don't have Toshiba recovery disc. I also want to know what to say other users.