Nighthawk AC1900 model R7000 - cannot install firmware

Similar Questions

• Cannot install Firmware on ReadyNAS 102 v6.2.5

  Hello world

  I tried to install the new OS version 6.2.5 on my ReadyNAS 102 but each time it restarts, it always goes back to 6.2.4. I tried to do the manual install, as before, but nothing helped. Does anyone have a solution to this?

  Thank you

  I had been looking for ways to install v6.4 now and earlier I came across this thread: https://community.netgear.com/t5/New-to-ReadyNAS/Unable-to-Uograde-to-NASOS-6-4-0/td-p/993406 which led me to this FAQ about v6.4: http://kb.netgear.com/app/answers/detail/a_id/29961 which then leads to this workaround: http://kb.netgear.com/app/answers/detail/a_id/29961

  The workaround solution "works".

• Cannot install the router firmware-impossible to access the knowledge base to do.

  Hello

  complete newb here.

  I'm having some trouble with the abandonment WRT610N router whenever I put on new devices on the network and I go to the download of the firmware update - FW_WRT610N_1.00.03.15_20090514- but I don't know how to install it. It is a .bin file.

  I'm reading the F.A.Q.S. on how to install a firmware on the router, but I can't access the database of knowledge here and I can't create an account to access either.

  How to install firmware?

  I tried just looking for updates via Lela and he says no update.

  I can't finad any program to open the .bin file.

  Duane

  I managed to get the update of the firmware.

  The problem is I think that my router is pretty buggy and unfortunately I got a defective router for purchase.

  It kept stalling on me and go through the steps of power flashing randomly.

  I had replaced it where I bought it and the new router is not a problem at all.

  Thank you for all your help

• DLNA Nighthawk AC1900

  I am a complete novice and ignore completely (even if I'm posting in the right place) so please keep answers as simple as possible.

  I am now using to AC1200 D6200 Moden router model, with Netgear genius installed.but as my ISP change over fiber, I bought a Nighthawk AC1900 D7000 model

  Question: Is Netgear engineering the same for all models of routers so that I can include the use of one installed for AC1200 or I have to download a new version for the new AC1900?

  Yorky wrote:
  Question: Is the same Netgear engineering for all routers model so I can carry on using the one installed for AC1200...?

  It has been my experience. The autonomous genius, if that's what you want to say rather than the little genius of the web interface, is a generic package that supports a range of hardware.

  I don't know if the application supports everything, however. Some kit may be simply too old for his magic.

• HP 15r-250tu: cannot install the drivers for the new laptop

  Hi expert, I bought a new laptop from hp 15r-250tu. I installed windows 7 ultimate (64-bit) service Pack 1. Cannot install the drivers for my laptop.i IAM downloaded all the drivers available on the site of hp for this model laptop.i tried to install them in the order as the mentioned error messages, but get that my phone does not support these drivers. Please answer me with links of driver and sequence to install. Thank you.

  Hello:

  Use the W7 x 64 drivers for the HP 250 G2 on your model except file BIOS, firmware, wireless and bluetooth.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5449369&swLangOid=8&swEnvOid=4059

  Wireless:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_149229_1&swEnvOid=4058

  Bluetooth:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_149791_1

• Satellite P750 - 02Q 001 - cannot install the Bluetooth and Tuner DVB-T_ATSC Yuan

  I have more than 20 years and the first time ever answer concerning support for the installation of a driver... sheeezz

  Recently bought laptop below and formatting of disk with WIndows 7 ultimate + SP1 (64-bit)

  Australia
  TOSHIBA SATELLITE P750 - PSAY3A - 02Q 001

  Cannot install the latest drivers below (everything worked when bought the laptop):

  -Yuan DVB-T_ATSC Tuner driver (for TV Tuner model only) driver 2.3.3.31 Windows 7 64 - bit 2.9 MB
  -Bluetooth Stack for Windows by Toshiba Bluetooth 8.00.06 (T) Windows 7 64-bit 78,08 MB

  * DVB - T Tuner Driver *.
  The EXE file extracted in the temp folder and goes no further.
  The device driver shows "STK7700D" with an exclamation mark against it. See the image below.

  * Bluetooth Driver *.
  First installation install the original driver, then he received close to 50% through the installation (appears to fail to install the components of RF RFBUS).

  Then install attempt fails to go too far (is unable to install the driver at all).

  Third attempt and subsequent attempts to repeat the foregoing in order. Install it just gets to a point and is unable to go any further.

  I tried to disable all Wireless WAN and various other comments and try the install again. Repeats exactly as above!

  Refer to pictures:

  DEVICE MANAGER
  http://I52.Tinypic.com/35cr38i.jpg

  1ST COURSE SETUP
  http://I52.Tinypic.com/2r6jfv9.jpg

  2ND INSTALL PROGRESS
  http://i55.Tinypic.com/jgphfc.jpg

  see you soon

  Dennis

  > The EXE file extracted in the temp folder and goes no further.
  > The device driver shows "STK7700D" with an exclamation mark against it. See the image below

  Try to extract the exe from another place, not in the temp folder.
  In my case, I created a folder on a second partition (D) and have extracted the exe file in this folder. Can go to the Device Manager, and then can install the driver through the Device Manager.
  Choose the installation procedure advantage and point to the folder that contains the extracted files.

  With regard to the issue of the BT;
  Download the new battery of BT from here:
  http://APS2.toshiba-tro.de/Bluetooth/

  Then clean the registry using the CCleaner.
  This tool is freeware and can be downloaded on several different pages.
  So after cleaning check if you could install new BT of the register stack.

• Satellite R630 - 11L - cannot install Windows XP Prof SP2

  I removed hard drive-> insert new ald (SATA) hard drive-> insert CD Windows XP SP2 DVD driver teacher-> Power Off.
  Power On-> laptop reads the Windows XP SP2 CD-> installation process

  But in the end, only 'bluescreen': cannot install (CD ist already installed successfully for an another old laptop.
  I have 5 times to try.

  Who did it successfully?

  Thank you very much!

  On this forum, you can find a lot of discussion on the installation of Windows XP Home edition on the new laptop models. What you need is driver SATA and it must be loaded prior to installation of WXP begins.

  More info on what you can read on - http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm

  If you have any other questions you are welcome.

• Equium L40 - 10z PSL41E - cannot install audio driver WinXP

  Hello!

  I'm having a problem with the installation of the Windows XP sound card drivers

  Computer laptop informatio, Toshiba Equium L40 - 10z (bought from PC World) PSL41e
  2 GB Ram DDR2 - 667 Mhz
  Core 2 [email protected]
  120 GB hard drive
  Intel GMA 945 graphics card with shared memory

  I can't find drivers for my laptop, the specification is indicated above. I have windows XP with service pack 3 installed and the system is unable to install drivers Realtek High Defination or audio drivers Realtek AC 97 ". I even tried the latest drivers version 1.86 but not its use.

  I read the other posts on this forum and have tried the other model audio drivers as well, it seems that after running the installer from several other realtek audio drivers for windows XP THAT is of no use. I even tried to add material manually through the Device Manager and have to install these drivers for realtek high definition audio and the realtek ac 97 audio drivers.

  Of course, this helps the drivers to install, but windows cannot activate the material with an error code 10 with a note of explanation on behalf of the driver in Device Manager.

  I also tried to install the drivers of toshiba A100/A200 without exploitation, however, I read somewhere that there is a windows XP patch that is required to be installed, so that windows detect the chip high definition, which is on the motherboard. If one can provide a direct link to a driver with the .inf file that will have the information for the material, or if someone can advise (or provide a link for) according to microsoft update is required for windows XP, in the appropriate hardware detection, will be really useful.

  I'm also sorry for my bad English I'm unable to articulate with the type of problem, I faced. But if anyone knows of a solution and additional information is needed, I will be happy to provide you with everything I know.

  I'll be very grateful to anyone who helps address this issue. Looking forward to a positive response :).

  > have windows XP with service pack 3 installed
  To my knowledge, that the XP SP3 is not published official. Only a beta version is available.
  Then go back to SP2!

  > the system cannot install drivers Realtek High Defination or Realtek AC' 97 audio drivers
  Realtek AC 97 audio driver is not compatible! You must use the driver from Realtek High definition.

  > Of course, it helps the drivers to install, but windows cannot activate the material with an error code 10 with a note of explanation on behalf of the driver in Device Manager.

  The problem is that you have not installed the MS XP patches that are necessary to get the sound working.
  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?forumid=59&ThreadId=25916

  You need the KB888111 and KB835221 hotfix

  Good luck

• Satellite C650 and WXP - cannot install the driver for WLAN adapter

  Hello

  I have recently 'come down' Win 7 to Win XP on my laptop because the software I use works best from XP. It's a pain because of the SATA drive, I needed to streamline a facility etc... but now, I'm happy to announce that I am in place and running under XP with one small exception...

  I can't get my wireless adapter to install.

  The LAN adapter ' Atheros AR8152 PCI-e... ' is installed and running

  Plug-and-play find a "network controller", but it cannot install it and leave her with the formidable yellow '?'

  I have visited the support site, entered my details laptop and downloaded the appropriate drivers, but they don't seem to want to settle. File self extract and then never run the Setup, as Toshiba only I downloaded self-extracting exe files, I have no file inf etc. try manually.

  Any suggestions welcome because I ran officially ideas

  What Satellite C650 do you have exactly? I can see on the Toshiba download page there are 4 different models. One you have?
  Check it please sticker post name of exact model so that we can check the specification s notebook and see what WLAN adapter is inside and the bottom.

• Cannot install Windows updates (has no status) on the computer desktop and laptop

  Desktop               (Purchase date: 13/07/2010)

  Model: Pavilion p6402f or 6402f

  Product: BK275AA #ABL

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 1 64-bit

  Product ID: {removed privacy}

  Portable               (Purchase date: 14/07/2011)

  Model: Pavilion g6 Notebook PC

  Product: QD317UA #ABC

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 164-bit

  Product ID: {removed privacy}

  Description of the problem: same problem on the computer desktop and laptop at the same time began: cannot install Windows updates (has no status)

  No hardware changes or software recently made to the system: I followed the usual procedure to install Windows updates.

  Method of connection: wireless

  Technical expertise: intermediate level

  Performed troubleshooting: because the error # 80071 A 90 type indicated by the system, I followed the instructions of Windows Help and Support, for example to run Microsoft Fix it which did not work; a more advanced method has also been used, who recommended to start Windows Update in Mode safe, then open Windows Update and install the updates and then restart normally. At this point, the problem was that any stage of Windows Update was available.

  Hello amib004,

  As much as I know, only Windows Update cannot be run in safe mode. That being said, I saw where install several updates may conflict with each other. Try to disable all updates installation and install the updates failed one at a time.

• Satellite L300 PSLB0E - cannot install Vista and Win XP

  Hello

  I have a L300, model number PSLB0E sat. \
  It was originally loaded with vista home premium, but it starts now not at all.
  I made a disc of vista Home premium and the number to go with it, but it gets as far as "windows installation" but then it stops.

  I tried to new hard drive, same loading XP pro not working!
  I think it's Bios, but after the download from Toshiba on this PC and transfer it to a memory stick, my laptop can't see it?

  Please can someone point me in the right direction?

  A big thank you in advance Paul

  Hi mate

  Please check in the BIOS if the disc is visible.
  If so, then set compatible SATA to AHCI mode and then try to boot from the Vista or Win XP disc.

  But if the HARD drive is not visible in the BIOS then it would mean that the HARD drive is dead and so you cannot install the operating system.

  Check it!

• Cannot install the MFP M177fw printer driver

  I try again to install the driver and follow the instructions at the bottom of the link but still cannot install. I start small windows and even to create a new user, but can not run.

  http://h30434.www3.HP.com/T5/printer-software-and-drivers/not-able-to-install-a-driver-for-MFP-M177f...

  I use windows 10 try to connect with the wireless option that the printer is in another room. The printer is connected to the router and ping is passthrough. But during the installation, the installer cannot find the printer. I will provide the number IP Installer but nothing helped.

  Can I do to install? Thank you.

  Rgds,

  Tony Thk

  Hi @TonyThk,

  Thank you for showing interest in the Forums of HP Support!

  I understand that you are unable to install the printer wireless. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that you have followed the steps in the post you mentioned. In addition to these steps, try the following.

  Tips for a successful wireless connection:

  • What type of encryption are you helping? HP recommends WPA or WPA2.
  • Using a unique network name (SSID).
  • Avoid using filtering by Mac address of the router.
  • Make sure you have 802.11 g active.
  • The printer cannot connect to the 5.0 GHz network. If you have a double router broadband, the 2.4 GHz and 5.0 GHz network names are not the same. Rename the 5.0 GHz network.
  • Don't hide your SSID (network name).
  • Change the router channel fixed wireless as the 1, 6 or 11, who less than traffic.
  • You have a switch or an extra router?
  • Do not use a network of comments (SSID).
  • Disable UPnP on the router.
  • Set the router to 20 Mhz only, or 145Mbps depending on the router.
  • Update the firmware on the router.

  Disable IPV6 in front panel of the printer menu:

  1. Configuration menu
  2. Network configuration
  3. Network services
  4. IPv6, select disabled.

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  To assign the static IP address, use the following steps as a guide.

  1. Print a Page of Network Configuration menu of the printer front panel. Note the IP IPV4 of the printer address.
  2. Type the IP address in the browser to bring up the SAP.
  3. Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  4. Select Manual IP.
  5. Enter your IP address manual (192.168.0.232)
  6. Enter 255.255.255.0 for the subnet mask, except if it is different.
  7. Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  8. Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  9. Click on apply.
  10. Restart the router, the printer and the computer.
  11. Test print.

  Ensure that your router and firewall do not block these ports.

  • UDP ports: 427, 137, 161
  • TCP port: 9100
  • Card photo upload:
  • UDP ports: 137, 138, 427
  • TCP port: 139
  • Scanning:
  • UDP port: 427
  • TCP ports: 9220, 9500
  • The HP device status:
  • UDP port: 161
  • Sending faxes:
  • UDP port: 427
  • TCP port: 9220
  • Installation of the HP device:
  • UDP port: 427
  • Ports of Web Services:
  • UDP and TCP: 80, 443, 5222 and 5223
  • Hello Ports:
  • TCP and UDP: 5353 and 5297, 5298

  Update the firmware of the printer:

  • Click here to download and install the update of the firmware of the printer.
  • Make sure that the printer is connected directly to a wall outlet (do not use a bar or a surge protector).
  • What were the results when you ran the printing and scanning doctor (she print or scan, error messages)?
  • Try to install the USB printer.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Cannot install updates Windows XP error Code 0 X 80070670

  original title: CANNOT INSTALL UPDATES WINDOWS XP ERROR CODE 0 X 80070670

  CONTINUE WITH WHAT?

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Microsoft cannot install maps ISATAP

  Cannot install the Microsoft ISATAP adapter, an error is created whenever it tries to install this software.

  If you do not need this adapter to your network, I think you can disable it in Device Manager.  It should be in the section of the network adapters.

  For future use, when the application for aid, you must always include the make and model (e.g., p6-xxxx) of the computer or the monitor. This information is necessary for us to review the specifications for them.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Cannot install the printer and windows update error 80070026

  Original title: Registry Editor not work cannot install the printer

  I have Vista the operating system on a Dell laptop with a Core 2 duo, map of Nivea.  Norton Antivirus now after it has started.

  Tried to install the dell printer after uninstalling all printers.   I scan my system using promp... sfc/scannow then I got windows results resource protection found corrupt files but was unable to fix some of the them.details are included in convertible bonds. Journal windir/logs/CBS/CBS.log
  for example:C:/windows/log/cbs/cbs.log

  I looked in the directory C find regedit.exe to rename, but was unable to find it.   I found these if this can help.

  Regedit.exe.4288.dmp
  Regedit.exe.3280.dmp
  Regedit.exe.2292.dmp

  I also got error or popup that without running windows Explorer and then restart it.   I can't install the printer as it pops up and I need to close the program.

  also receive error installer that it is already running
  install GUI is unresponsive

  error code 80070026 during the installation of windows updates.  I open without addons and updates are all to date.

  I'm sorry that there is so much information and error codes.  I think that all what concerns the corrupted files.   Can you help solve c drive please.

  Hello

  1. What is the serial number and model of the printer?
  2. What are the failed updates?
  3 have there been any changes made on the computer before the show?

  I suggest you try the steps to solve the problem with the installation of printer.

  Method 1:
  Run the Fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  For more information, see the links:
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
  Search for a printer, the manufacturer Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website
  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  I suggest you try the steps to fix the problem with Windows Update.

  Method 2:
  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
  http://support.Microsoft.com/kb/929135

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 link to return the computer to a Normal startup mode.

  Method 3:
  Temporarily disable the security software.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 4:
  You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
  http://www.Microsoft.com/downloads/en/default.aspx

  For more information, please see the links.

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows

  Warning: An upgrade on the spot is the final solution before you have to reinstall the operating system. Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process

  Hope this information is useful.