Cannot install Firmware on ReadyNAS 102 v6.2.5

Similar Questions

• Nighthawk AC1900 model R7000 - cannot install firmware

  I have a Nighthawk AC1900 Smart WiFi router model R7000. I have a C2000T Modem from Qwest. I can't access the router settings page using the links provided in the instructions for installation of the firmware. We used to have our service wifi with Time Warner, and I was able to connect to the router and install a new firmware. Here is what is happening now: http://www.routerlogin.net: page error msg - "this Web page is not available. ERR_CONNECTION_REFUSED ". http://www.routerlogin.com: same msg of error as above http://192.168.1.1: redirected to the login page of the C2000T Qwest Modem Configuration. http://192.168.0.1: Once again taken to Qwest Modem Config. page I can connect to the Config of the Modem page: 192.168.0.1 is listed as the IP address of the modem 192.168.0.3 is listed as the IP address for the R7000. When I manually enter this address, I get the same page listed above error msg. I'm stuck. I don't know what to try next. Can anyone help?

  Thank you very much! I really enjoy taking the time to help me. I am now able to enter the genius of router.

• ReadyNAS 102 - cannot install applications (all)

  The evening

  I bought a ReadyNAS 102 in January, after an initial installation, I installed OwnCloud and decided that I didn't want so I uninstalled. This had the unusual side effect of uninstalling the main web server for the device, after having met the support team, I took the action at the factory reset my device, which has restored the main web server

  Since then I was able to install all the applications. Whenever I try to do, I get the error "unable to install ."

  I've recently updated to 6.2.2-> 6.2.4 firmware and I'm still having the same issues. Although now I also have the message "Apps operation failed: list of applications can be missing or out of date." You want to update the list now? ' - choose 'Yes' to this fact appear a message "update list" box

  I then get a response "list of the application updated successfully. You can now install applications", however, any application I try to install still does not work and the guest above is provided again.

  I would be grateful any advice anyone can offer to fix this issues.

  Thank you

  Chris.

  It turns out that the DNS has been set incorrectly and the NAS could not connect to the internet. Refreshing DNS on the Server NAS has solved the problem.

• Cannot install the router firmware-impossible to access the knowledge base to do.

  Hello

  complete newb here.

  I'm having some trouble with the abandonment WRT610N router whenever I put on new devices on the network and I go to the download of the firmware update - FW_WRT610N_1.00.03.15_20090514- but I don't know how to install it. It is a .bin file.

  I'm reading the F.A.Q.S. on how to install a firmware on the router, but I can't access the database of knowledge here and I can't create an account to access either.

  How to install firmware?

  I tried just looking for updates via Lela and he says no update.

  I can't finad any program to open the .bin file.

  Duane

  I managed to get the update of the firmware.

  The problem is I think that my router is pretty buggy and unfortunately I got a defective router for purchase.

  It kept stalling on me and go through the steps of power flashing randomly.

  I had replaced it where I bought it and the new router is not a problem at all.

  Thank you for all your help

• Sonos and ReadyNAS 102 v6.4.1 compatibility

  I use a ReadyNas 102 to serve files from music for a Sonos system.

  Everything worked perfectly under firmware 6.4.0, but after upgrading to Sonos 6.4.1, is no longer able to index or see about two-thirds of the content (files flac and mp3).

  Decommissioning of 6.4.0 snaps back and Sonos works as expected and is able to index my entire collection.

  the upgrade of ReadyNas is the only thing that's changed.

  Any ideas what's happening?

  righteye wrote:

  I use a ReadyNas 102 to serve files from music for a Sonos system.

  Everything worked perfectly under firmware 6.4.0, but after upgrading to Sonos 6.4.1, is no longer able to index or see about two-thirds of the content (files flac and mp3).

  Decommissioning of 6.4.0 snaps back and Sonos works as expected and is able to index my entire collection.

  the upgrade of ReadyNas is the only thing that's changed.

  Any ideas what's happening?

  I use my RN 204 to broadcast my Sonos system files and it still works after that I updated to 6.4.1.

  You have active Antivirus?

• ReadyNAS-102 (6.4.1) disconnects randomly

  Hi all

  Over a year ago I bought a NAS readyNAS-102 as replacement for my old configuration by using a media player with external drives. From the beginning I was very happy with the way everything worked, it was so good!

  I was able to access my files across using FTP, I could listen to my Samsung Smart TV and all devices (laptops, ipads, you call it) could access the database, I created.

  This has stopped recently. For some unknown reason my readyNAS-102 with firmware 6.4.1 randomly disconnects after a while to load. It doesn't matter if it is used TV, laptop or tablet.

  For example, when you watch a movie on the TV, the laptop or Tablet the device disconnects from the SIN after a random delay. This may be 3 or 30 minutes in the film. Strange thing is, it is not peripheral wide, so when the laptop is disconnected (I can't access it storage network or via static ip address) I can still access the NAS with my ipad.

  The same thing happens when you look at photos etc. I already tried several things but can't seem to find the missing piece of the puzzle.

  Perhaps people with more knowledge have a hunch where the problem may be.

  Kind regards

  Tomas

  I am pleased to announce that for the moment, the problem disappeared.

  I updated the firmware to the latest version beta 6.4.2 - T72 and tested by watching a movie.

  For 1 hour and 15 minutes the NAS has run smoothly so I am happy again.

  Thanks for the quick and clear answer y ' All!

• How to enable curl on readynas 102

  How to activate curl on my readynas 102. I find no answer anywhere.

  I tried to install curl via winscp through the command apt but failed. Please help me with this

  Ah. What of it? :

  # apt - get install php5-curl

  You can try adding

  extension = curl.so

  in your php.ini file.

• ReadyNAS 102 no access to the files either

  Hi, I need help!
  Let me try to describe the events that led to this.

  1. I discovered yesterday that the ftp did not work on my readynas 102 suddenly

  2. I went into the admin page and tried to turn off and restart the ftp service. (he has not solved)

  3. I accidentally disabled the http service to uncheck "Admin HTTP"

  4. all access to my nas was suddenly unavailable. ? Shared folders no longer appear in my network. -I got tvmobili installed all this while and strangely tvmobili can still access my files via dlna on my TV.

  5. I tried os reinstall, but in vain.

  6 willing Raidar to a management service is offline error and I am also unable to download all the newspapers. (Failed)

  No browse button, Admin leads to a page that will never load.

  7 diagnosis indicates Disk 1 has 2 timeouts of command

  8. I tried to take the drive out and put it in an external hard drive enclosure. OS x is unable to read the disc. I tried it on debian via parallels and it has a hard drive tb 5 complete with unknown partition (PMBR) and impossible to climb. (How can it be empty if I can still access my files through dlna via tvmobili?) What format is the hard drive in and how can I get on osx or any os?

  9. If I boot the nas as usual, the power button keeps blinking.

  I am currently using Mac in my household. I owe too much in the hard drive just do a factory reset. any ideas anyone? I'd really like to get the files inside!

  Thanks for any help!

  
  

• ReadyNAS 102 extremely slow after upgrade to 6.4.1

  I have a Readynas 102 system with 2 drives of 2 TB. There are about 230 GB of data onto the disks. Yesterday, I upgraded 6.4.1, as suggested in the administration page. After that, the system is extremely slow. I use windows 7 pc and modem Asus, all wired. In windows Explorer, it takes minutes to get the folder hierarchy, if it comes with an answer at all. In many cases, that the answer is, disk unreachable.

  Is there anyone who can help me with this

  Thank you

  Joop Baltussen

  What firmware are you running?

  The antivirus service is enabled.

• HP 15r-250tu: cannot install the drivers for the new laptop

  Hi expert, I bought a new laptop from hp 15r-250tu. I installed windows 7 ultimate (64-bit) service Pack 1. Cannot install the drivers for my laptop.i IAM downloaded all the drivers available on the site of hp for this model laptop.i tried to install them in the order as the mentioned error messages, but get that my phone does not support these drivers. Please answer me with links of driver and sequence to install. Thank you.

  Hello:

  Use the W7 x 64 drivers for the HP 250 G2 on your model except file BIOS, firmware, wireless and bluetooth.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5449369&swLangOid=8&swEnvOid=4059

  Wireless:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_149229_1&swEnvOid=4058

  Bluetooth:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_149791_1

• Cannot install the MFP M177fw printer driver

  I try again to install the driver and follow the instructions at the bottom of the link but still cannot install. I start small windows and even to create a new user, but can not run.

  http://h30434.www3.HP.com/T5/printer-software-and-drivers/not-able-to-install-a-driver-for-MFP-M177f...

  I use windows 10 try to connect with the wireless option that the printer is in another room. The printer is connected to the router and ping is passthrough. But during the installation, the installer cannot find the printer. I will provide the number IP Installer but nothing helped.

  Can I do to install? Thank you.

  Rgds,

  Tony Thk

  Hi @TonyThk,

  Thank you for showing interest in the Forums of HP Support!

  I understand that you are unable to install the printer wireless. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that you have followed the steps in the post you mentioned. In addition to these steps, try the following.

  Tips for a successful wireless connection:

  • What type of encryption are you helping? HP recommends WPA or WPA2.
  • Using a unique network name (SSID).
  • Avoid using filtering by Mac address of the router.
  • Make sure you have 802.11 g active.
  • The printer cannot connect to the 5.0 GHz network. If you have a double router broadband, the 2.4 GHz and 5.0 GHz network names are not the same. Rename the 5.0 GHz network.
  • Don't hide your SSID (network name).
  • Change the router channel fixed wireless as the 1, 6 or 11, who less than traffic.
  • You have a switch or an extra router?
  • Do not use a network of comments (SSID).
  • Disable UPnP on the router.
  • Set the router to 20 Mhz only, or 145Mbps depending on the router.
  • Update the firmware on the router.

  Disable IPV6 in front panel of the printer menu:

  1. Configuration menu
  2. Network configuration
  3. Network services
  4. IPv6, select disabled.

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  To assign the static IP address, use the following steps as a guide.

  1. Print a Page of Network Configuration menu of the printer front panel. Note the IP IPV4 of the printer address.
  2. Type the IP address in the browser to bring up the SAP.
  3. Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  4. Select Manual IP.
  5. Enter your IP address manual (192.168.0.232)
  6. Enter 255.255.255.0 for the subnet mask, except if it is different.
  7. Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  8. Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  9. Click on apply.
  10. Restart the router, the printer and the computer.
  11. Test print.

  Ensure that your router and firewall do not block these ports.

  • UDP ports: 427, 137, 161
  • TCP port: 9100
  • Card photo upload:
  • UDP ports: 137, 138, 427
  • TCP port: 139
  • Scanning:
  • UDP port: 427
  • TCP ports: 9220, 9500
  • The HP device status:
  • UDP port: 161
  • Sending faxes:
  • UDP port: 427
  • TCP port: 9220
  • Installation of the HP device:
  • UDP port: 427
  • Ports of Web Services:
  • UDP and TCP: 80, 443, 5222 and 5223
  • Hello Ports:
  • TCP and UDP: 5353 and 5297, 5298

  Update the firmware of the printer:

  • Click here to download and install the update of the firmware of the printer.
  • Make sure that the printer is connected directly to a wall outlet (do not use a bar or a surge protector).
  • What were the results when you ran the printing and scanning doctor (she print or scan, error messages)?
  • Try to install the USB printer.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Cannot install iOS 10.0.1 with Apple Configurator 1.7.2

  Hello

  I have 60 iPads in 5 carts (12 per basket) that I need to install some applications on. They are already configured and supervised with Apple Configurator 1.7.2. I've never had problems in the past with AC1, I've always been able to install the updates and applications easily with very few questions, because of that I've never felt the need to update to AC2. However, this time during the update of ios and refreshment, I get the error 'complete with an error - cannot install iOS' 10.0.1 And now 12 of my iPads are stuck in recovery mode.

  I tried before wipe them off and re supervise them, but I always get the cannot install iOS 10.0.1 error, followed by all the iPads stuck in restore mode. I tried to update only 1 or 2 at a time. I tried the update/supervise them with no apps queued for installation. I tried to restore the iPad via iTunes, which works, but when I try to put it back on AC1, I still get the same error mode and recovery.

  I tried searching online for compatibility with the new iOS and AC 1 problems but found nothing.

  I would like to know if there is more information I should provide that might help.

  Thank you for your time.

  Ben

  Hi Ben

  Makes your iPad successfully update to IOS 10, we have approximately 400 ipads, I've updated a single ipad at 10 IOS using our MacBook pro AC1 OSX El Capitan to test, ill try another now and see if its success.

  When you connect an ipad update the Configurator re-download the IOS 10 or use a cached copy?

  How your Configurator is connected to the internet (behind Proxy, Wifi, Ethernet), perhaps the downloaded IPSW file is corrupted and need to be redownloaded removed\.

  Kind regards

  Rick

• Cannot install 9.3.5 iPad after two downloads

  Cannot install 9.3.5 for ipad

  HI I just wanted to know if it was on an ipad or a. Mac if it's an iPad plug support on a computer or go on http/www.apple.com

  Thank you

• Cannot install OS: "this identifier Apple has not yet been used.

  I just got my first Mac yesterday, a mid 2010 Macbook of opportunity. It's in great shape, works great, I was briefly very satisfied with my purchase. Then I tried to reformat/reinstall, as it does whenever purchasing a computer used.

  I followed the instructions here: https://support.apple.com/en-us/HT204904 and when I got to the step three, after the failure of the hard drive, it wouldn't let me install the operating system. He wanted to connect first with my Apple ID, so I did an Apple ID, but now it keeps giving me an error "this identifier Apple has not yet been used in the App store" and then it gives me the opportunity to cancel or "review". Click Cancel simply cancels the installation, just by clicking on review also cancels the installation.

  An ID is not necessary, but there is no way I can see to avoid it say the instructions on this page. It was suggested that maybe I could avoid the connection on the way to recovery, rather than recovery of the Internet, but the Cmd + R and Cmd + Option + R give recovery of the Internet. I don't see any way to get to the regular recovery.

  I had a suggestion to install from the disc, but I have not all discs. If I could download it from somewhere and burn them then that would be nice, but the instructions on this page are pretty clearly that it should not be necessary to use disks. I should be able to do without signing in.

  So... what upward with who? Where should I go from here? Is it possible to do a regular recovery? Or bypass the Apple ID thing?

  < published by host >

  "a mid 2010 Macbook opportunity."

  "Cannot install OS:" this identifier Apple has not yet been used.

  It's the property > change owner of a Mac of opportunity

• I cannot install extensions, they appear with "will be installed after you restart Firefox" even after that I restarted.

  Hello

  I cannot install extensions, they appear with "will be installed after you restart Firefox" even after that I restarted.

  The 'Intermediary' folder is present and rest after a restart, but the extensions do not get installed. They show in the extensions page with the message "will be installed after you restart Firefox" and remain like that, no matter how many times I restart.

  Any idea?

  Under Firefox 24.0 Windows 8.1

  Thank you very much
  BD

  P.S. Just tried to install the add-on "convenience store" before asking the question and I got an error saying that it cannot install because it cannot change the necessary file. (I did manually instead)

  I tried to delete the files extensions.* nothing works. However, I deleted the addons.sqlite file and restarted my computer (computer not only Firefox) and that seemed to do the trick. Problem solved.

  Thank you for your help, it is appreciated.