Nighthawk D7800 and BT Infinity 2

Similar Questions

• Nighthawk D7800 fiber Modem?

  I currently have PlusNet FTTC. My router plusnet causing problems and plusnet weren't much help as it was more than a year. So I had to go buy a new one.

  I thought I read somewhere that I can use the D7800 as a router modem and fiber (replacing my BT fiber modem). However, I can't find all the information on how to set up in the manual. Only connect to my existing BT modem.

  Is this possible? Is there (for a non router expert) information on how to do this? Or should I just stick with the BT one?

  Thank you very much

  Mark

  I'm talking about me here!

  In any case, it seems that my problems were to do with the firmware. I've updated to V1.0.0.44, done a reset and the wizard worked the first time. Not changed anything else, or what I entered. Who was also using the built-in modem.

• Nighthawk D7800 will not work with 1.0 Chromecast

  Hello
  Try to get to work with my new router Chromecast. No problem of installation, but when I try to stream from an app that is not able to set up a connection.
  When you use app chromecast I can do a factory reset and configure everything, but then get message may not notify the Chromecast device.

  Tried my rating 4 and Surface Pro 3. Using the connection Wifi 2.4

  I have idea?

  If you are on DSL try changing the MTU value at 1492 1500 and see if it works.

• R7000 Nighthawk Wired is faster than the wireless

  I currently use a Nighthawk R7000 and after the speed test internet using speedtest.net, I found that a desktop computer that is connected directly with ethernet is more than 100 Mbps faster than a wireless laptop which is the only room away from the router (wired office gets 140 ~-~ 160 Mbit/s, while the laptop is ~ 30-40 ~ Mbps). Any help would be great.

  Thanks to all who tried to help, but he had a friend IT of my father who came and said: it's a certain chip (or something of the kind) in my computer that was wrong, so we got a Linksys adapter Max - Stream AC600 WiFi Micro USB. I can now get 90 Mbits/s download. Thanks again for everyone's help.

• Bluetooth 3.0 Infinity Disney base no not matching on AppleTV

  I have the new AppleTV 2015 and the Disney Infinity 3.0 starter edition that I ordered from the Apple Store a few weeks ago.  The box indicates that this is the version of bluetooth of the Base of the infinite and compatibility of Apple devices lists.  The operating system is updated to tvOS 9.1 and Disney Infinity 3.0 is installed, we have been able to play one of the Starter levels (battle of Yavin).  But there is no sign anywhere of the AppleTV, be able to communicate with the Base of the infinite, even after a few iterations of the electric based bike and restarting the AppleTV.

  Is there an indication of mating or communication which should be evident outside the game?  In the Bluetooth configuration in the system preferences panel, I am able to see the controller that comes with the game starter pack and it pairs and works.  But, no sign anywhere of the Base of the infinite, which is turned on, nearby, and flashing her little blue light.

  Should what steps I take to understand on which piece is broken, the Base, the AppleTV, or something in the software?

  (a remarkable singularity, when I hold my phone near the Base of the infinite to try to take a picture, the answer Apple pay screen!  Is there an NFC chip in the Base?)

  curious,

  Rob

  I have the same problem with the same material. As far as I know, the base will not appear in the menu bluetooth tvOS. Our base finally showed after power cycling a few times and made the right base against or on top of our Apple TV. Then, inside the Infinity Disney app, our base appears with full signal strength but we cannot choose to play with our numbers. We can only play the digital edition, while the base just flashes blue on the disk space of power. Very disappointing.

  IF anyone knows a solution, let us know! Disney site has anything about it at the moment. Thank you!

• D7000 will not connect... Help, please!

  I bought a nighthawk d7000 and could not get it to connect. I thought it was my connection speed WiFi, because it would take me to the site of router configuration but should then always be with configuration protocols and detection of Internet settings still would take me again through the steps. I had a technician who confirmed that it was 11mbs in the House and to the router. I called netgear who (wrongly) told me that I needed to have the account information provided by my ISP provider. I called them and they told me I was not running a pppoe and therefore does not need. I called netgear and they told me that I had to call my ISP (for something), and then the call conveniently dropped as technology which was trying to tell me what to do clearly did not know what she was doing.

  It seems that somehow, I probably need to configure the DHCP settings and perhaps manually assign an ip address, but honestly I'm new on this and I have very little idea as to what I'm doing.

  Ideas, any help would be greatly appreciated!

  It is more likely is not supposed to because I had / have no idea what I'm doing. Thank you for your response. I had it works, but only after you have spent hours bouncing back between netgear and my ISP.

  Ultimately the router should be configured to 'type of Internet' ADSL equal and the ip address is set to 'use my computer.' it finally got all white lights.

• The GS324 supports 802.3ad Dynamics?

  I am looking to buy a Nighthawk R8500, and a switch of 24 ports of GS324 for my home network. However, I have found no information to indicate whether or not the GS324 supports double AD ports on the router R8500. It would really cinch the purchase for me, otherwise I'm on the fence.

  Does anyone know if the switch supports? If not, what switch would be recommended to get that extra bandwidth?

  Hello DasMainframe,

  Welcome to the community!

  The GS324 switch is only a (silent) switch passthrough and I do not think that it supports the LACP Protocol. It is not configurable, since she does not have any user interface or management software. If you want a switch with LACP (802.3ad) you have to go with our Smart Switch (PROSAFE series) models.

  Let us know if you have any other questions.

  Thank you

• R8000 losing speed

  Lose speed between the modem and the router. Internet "extreme" TWC who is 30mbps and router has been deliver 22mbps both ethernet and Wi - Fi direct ethernet while the modem had shown on 40mbps. Upgrade to 'ultimate' internet which is 50mbps and always get the same output from the router, cannot get more than 22mbps. Direct modem Ethernet shows 62mbps. Have updated firmware Nighthawk R8000 and modified without changing the performance channels. The distance between the router is less than 20 feet. Any ideas?.

  In Terminal 3 I gave you a suggestion to follow, you have to first solve the wired problem. Reset to default values and test, same problem contact the technical support.

  Reset to the default values is done by pressing reset util power led flashes, check the manual if in doubt always of this process.

• R6200 caps than ethernet wired 200 Mbps of download speed

  I recently updated my home ISP service in the service of Time Warner 300mbps. If I make a wired connection to the modem cable from the ISP, I can reach the speed of 300mbps advertised, so I get what I pay for my provider.

  However, when I connect the same PC (cable) to the R6200, the download speed is capped at 200 Mbps. This suggests that the question is the R6200 (I'm just the fact to unplug and plug the cable even in another device located a few feet farther).

  After 6 weeks, I've been on R6200 manual and parameters and cannot determine if there is a configuration setting, that I need to address, or if there is simply a limitation inherent in the R6200 who is covering my supposed to 200 Mbps gigabit speed I'm not also find in the documentation (or I found something obvious in the research of the community of Netgear).

  Other facts: confirmed I have the latest firmware on the R6200 (V1.0.1.56_1.0.43). Computer is a Dell Windows 10 with gigabit ethernet support (16 GB of memory, Intel i7, etc.). While I'm guessing that this is within the parameters of the R6200, I should not deny the fact that it may have something to do with the handshake between the cable modem and the R6200, to complete the cable modem is a ubee.

  If someone has had this problem and they solved? Any help/suggestions would be greatly appreciated.

  I tried all these things before posting. (I could do worse, but never better than 200 Mbps when it should have been 300mbps.) In recent days, I have been plagued by intermittent Internet outages. The R6200 ended up being at fault, apparently because he didn't want unreliable stay connected. I finally replaced with a R7000 Nighthawk AC1900 and I am happy to say that I get the full the R7000 300mbps. My problem is solved in this regard, although I wasn't expecting to have to replace the R6200.

• R7500 can't find my IP cam

  Hello

  Since yesterday, I use a Nighthawk R7500 and I can plug my devices. One is not connected, an IP DB-power cam. When you are connected by cable I have setup the cam using the configuration and the server DHCP the SSID and password and all other people think necessary for Wifi. But I have no connection to the router.

  Anyone know what I can do to get connected?

  Thank you

  Harvey

  I found the problem. The chanal 2.4 Ghz has 12. I changed it to a lower value (4), and now the cam works.

• Trace graph XY forever hiding other parcels

  Hello

  I use a graph XY draw certain limits. These limits are indicated by the plot 0 and parcel 2 , that's why I put them to "Fill in positive and negative infinity" respectively.

  It is, I now have another plot (trace 3) to display that fall into the 'limits' designed by plot 0 and 2. The result? Parcel 3 is covered almost entirely by the other plots with the "fill up to.." option.

  TL; DR: is there a way to make the plot 3 display along its length without being under the filling for x infinite plots?

  Current result:

  

  Expected result:

  

  Changing the order of the plots and setting limits to the end.

• I received a notification Windows Geniune advantage, error: 0 x 80082202.

  I have an error 0 x 80082202, how can I correct the situation?  Thank you... Paul

  Information system

  Microsoft Windows XP - Pro version 2002, service Pack3, computer intel 2 Duo core, E7500 2.93 GHz

  Using Internet Explorer with the following information

  Version 8.0.6001.18702
  Build 86001
  Ask the path C:\Program may Explorer
  English (United States)
  Active printer Microsoft XPS Document Writer, winspool, Ne01:
   
  Level of 128-bit encryption
  Disabled Access Manager
  IEAK install not

  When I goto and run the following, I get.

  http://www.Microsoft.com/genuine/diag

  Microsoft software genuine diagnostic results

  Past	Active scripting enabled
  Past	Display images enabled
  Past	Correct the date and time of the computer
  Past	Cookies enabled
  Past	ActiveX enabled
  Past	Validation of Windows loaded ActiveX
  Past	Load validation Office ActiveX
  Past	Support validation ActiveX loaded
  Past	Validation of mutual aid: the Data.dat Corruption control
  Past	Validation of mutual aid: audit Cryptography
  Past	Validation of mutual aid: Verification of Product Activation

  I clicked on the star and tried to solve it by there, he begins to IE and navigates to the next page and just sits and expects infinity, below on the left, says its done.  window rest is white (blank).

  http://answers.microsoft.com/en-us/Search/Search?SearchTerm=I+keep+receiving+a+Windows+Geniune+Advantage+notification%2C+error%3A+0x80082202.+&CurrentScope.ForumName=&CurrentScope.Filter=&askingquestion=true

  I have an error 0 x 80082202 and used the program MGADiag.exe and here is what I received.   How can I correct the situation?  Thank you... Paul

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: error license store
  Validation code: 12
  Code of Validation caching: n/a
  Windows product key: *-* - XG2GJ - YX6HV-V7VYQ
  Windows product key hash: QsAwaPN7vhYK7PzACureTGZlqcw =
  Windows product ID: 76487-083-0296056-22950
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 5.1.2600.2.00010100.3.0.pro
  ID: {237728F8-5800-4564-BC86-FF171FBB0AAA} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: Registered, 1.9.42.0
  Signed by: Microsoft
  Product name: n/a
  Architecture: n/a
  Build lab: N/A
  TTS error: n/a
  Validation of diagnosis: 025D1FF3-230-1_63BB5E84-487-80004005_E2AD56EA-85-80004005_16E0B333-89-80004005_78155E4D-232-80004005
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a
  Version: n/a

  Windows XP Notifications data-->
  Caching of result: 12
  File: Yes
  Version: 1.9.40.0
  WgaTray.exe signed by: Microsoft
  WgaLogon.dll signed by: Microsoft

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Outlook 2007-100 authentic
  Microsoft Office Home and Student 2007-100 authentic
  OGA Version: Registered, 2.0.48.0
  Signed by: Microsoft
  Office Diagnostics: 025D1FF3-230-1_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\IEXPLORE.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {237728F8-5800-4564-BC86-FF171FBB0AAA}1.9.0027.05.1.2600.2.00010100.3.0.prox 32*-*-*-*-V7VYQ76487-083-0296056-229505S-1-5-21-1482476501-1801674531-1236221625SYXsnc302eeh American Megatrends Inc.. 0517 20081030000000.000000 + 0002B673EF70184E07804090409Central Standard Time(GMT-06:00)03100100Microsoft Office Outlook 2007123DF781BDD86710kxd2L4NXYTPdLAg96DAxAuC/zWQ =81610-904-3643921-626121100Microsoft Office home and Student 200712SCVYJxtqcBBGrua8CfXA9yKSUtY =81602-910-8044246-684751 B1D9BD537B9D71C

  License data-->
  N/A

  Windows Activation Technologies-->
  N/A

  --> HWID data
  N/A

  Activation 1.0 data OEM-->
  BIOS string matches: Yes
  Marker of the BIOS string: 14450:ASUSTeK Computer Inc. B 15, 70: GENUINE C & C INC | Manufacturing 10704:Systemax
  Marker of OEMBIOS string. DAT: N/a, hr = 0x80004005

  Activation 2.0 data OEM-->
  N/A

  http://social.Microsoft.com/forums/en-us/genuinewindowsxp/threads?sort=firstpostdesc

  Activation problems

  Please post on the forum above and add the MGA/diag report to your query. Thank you.

• Can't see audio or track sound on the Timeline

  Hello

  I edit a video clip in Prime Minister 11 elements which usually takes an hour of video images in the scenario and audio files (in green) below. I can normally see those audio files on the timeline, remove them and change them.

  I now reopened the PREL file and audio files have disappeared. Audio files, I had that accompanied the video scenes are now part of the clip - so the work I did previously was still valid - but I can't change them because they are no longer on the timeline (but the video itself is still there).

  The main change I made is to move from Win 7 to 10 to win (this is the first time I opened Prem 11 in Win 10 and discovered the absence of audio files), but it may be unrelated. Now I get the following message appears on the screen:

  

  which, again, may be unrelated. In all cases, the Manager of peripheral devices, graphics cards, shows that I have an Intel G41 Express Chipset (Microsoft WDDM 1.1) adaptor, not Microsoft GDI Generic 1.1 which means the message on the screen. In all cases, the device manager tells me that I have updates.

  Again once the upgrade to win 10 and the issuance of the graphics card may have nothing to do with me not being able to see my green audio track. Is it possible, however, to get the way back so that I can change different things?

  Thank you!

  Steve

  Steve

  Just a quick note... even if you can lower the Volume to - 59 dB and into infinity, the highest reading dB is 6.0 (+ included). If you typed dB to + 10.0, you would get 6.0 dB (without sign +).

  I think we're OK on that now.

  Best wishes

  RTA

• How can I Debrick/Unbrick a Nighthawk X4S D7800

  Hello

  I was just wondering how I would go on debriking/unbrick my router (Nighthawk X4S D7800), in which case I have to.

  This happened until needed for Openwrt firmware. As well as not having the best of luck with the software in genral.

  Thanks in advance

  Epbenten

  I am not an expert in using 3rd world software, but what I've read they (which ever you use) have a process of reversal at each version. I don't know if a traditional process of TFTP would work if a third world THAT FW has been installed.

  I'm tempted to try a no nitgear on my r7000 version in the near future.

  http://KB.NETGEAR.com/app/answers/detail/A_ID/22688/~/how-to-upload-firmware-to-a-wndr3700v2-router-...

  This link indicates that it is for a 3700, just ignore it and follow the procedure

• I have an infinity of transformer Asus Pad and Android Market says that Firefox is not compatible with my device, but your site says that it is. How to do it?

  I want to install Firefox on my Tablet Asus of Infinity transformer and market Play/Android Google says that Firefox is not compatible with my device (even if I have it running well on my phone).

  Your Web site lists compatibility with this camera twice, once as got TF700T and then as Infinity Pad transformer.

  The transformer is up-to-date with all the software, and I am running the latest version of the Google game.

  If you are having problems with the Google game to download Firefox for Android tries to download these versions: http://www.mozilla.org/en-US/firefox/channel/#firefox .

  Don't forget you must enable this settings: allows you to install app from other sources than the Google game