Nighthawk meets the 42443 port 7000

Similar Questions

• Fluke 8845 A does not meet the LAN port

  I downloaded Fluke 884 X installed and installed driver.  The 8845A is connected to an internal LAN network.   Manually set the IP address, subform on the instrument.  Used the Measurement & Automation Explorer to search for the device.  Autodiscover does not work, but a manual entry of the raw socket.  Could validate the connection of the device.

  However, when I place a simple VI - say to run, well, whatever it is - initialize, system, etc., it seems I get a time-out error.  (I'm tired of sitting in the corner).  In any case, is someone tried the LAN connection?  Since I am new to LabView, maybe I missed something?

  Thanks in advance.

  I don't think that the DMM 8845/8846 is compliant VXI - 11, while the instrument of Agilent is compatible, you can check if the moat has an update of the firmware.

• The VI "VISA set up the Serial Port" will only work at 9600 baud

  I wrote a Serial Port RS232 RW.vi monitor of ' "which works for most. The problem is that it will not meet the alternative port configuration settings... For example: the default RS232 serial port configuration is:

  (COM1, 9600 baud, 8 data bits, 1 stop bit, no without parity)

  As a test, I use a Null Modem cable to connect to my LabView Com1 port to another PC running RealTerm Serial Port Monitor... Using my "RW.vi RS232' newly designed with the port settings of (COM1, 9600 baud, 8 data bits, 1 stop bit, no without parity), I can send and cannot receive data back throughout the day no problem...

  However, if I configure the port "RW.vi RS232" all other configurations, such as (COM1, 2400 baud, 7 data, 1 stop bit, odd parity bits)... He will not take the expected risks and continues to operate @ 9600 baud rate etc.

  Then, I changed the settings default "RS232 RW.vi" (2400,7,1, Odd)

  He still refuses to derogate (COM1, 9600,8,1, no...)

  I also went in the Device Manager of Win XP on the system of LabView and configured manually Com1 2400,7,1, Odd

  and yet,... work at the "RS232 RW.vi" @ 9600,8,1, none

  Everyone can test my VI in the car and see if they have the same problem of not being able to see the new changes in the Port configuration settings... other than (COM1, 9600,8,1, no...)...?

  FYI... Unfortunately my LabView runs on Version 6.0, you may need to up-conversion of the attached vi

  Instead of simply appreciate the comments, you need to implement.

  Having closed VISA inside the loop is definitely the problem.  And Crossrulz is 100% correct about the problem being that the serial port gets zero to default baud rate after the closure of the port.  Here's the proof.

  

  Note that while may have set the port settings manually in the Device Manager, these parameters are reviewed by the pilot VISA.  If you look in the measurement and Automation Explorer under devices and Interfaces > serial and Parallel, you'll see the default settings using the VISA driver.  If you change this setting, your program will work as desired.  But this is not the appropriate fix.  The correct solution is to get the VISA close out of the while loop.

  The port settings are established in this order.

  1. by Windows device drivers.

  2. by the VISA driver as set in MAX.  Since you are using VISA, these settings will be automatically replace #1.

  3. by the port settings, you set programmatically in your LabVIEW program.

• Using the Serial Port on the HP 50 g graphic calculator

  Hello world

  I have another question. I want to use the Serial Port on the HP 50 g to connect with another device. The device is called the MFJ-1214PC. What it does is to accept the text and commands through a 9-pin serial Port and converts the text in a Code Morse/RTTY sound audible. It also decodes Audible the Morse Code and RTTY radio signals and displays them as text on your computer. The program that controls the MFJ-1214PC was originally written for an IBM PC for the MS-DOS operating system. The HP 50 g graphic calculator meets the system requirements for the simplest version of the program. I was wondering if there is an MS-DOS emulator written for the HP 50 g, which would allow the HP 50 g to become the computer in this case, or if the program could be rewritten and brought to the HP 50 g. If it could be rewritten, programming language what do you think would be better suited to this type of application (if it is even possible?) or UserRPL, SystemRPL or Assembly. Don't forget that I'm a complete newbie with the HP50g and have never programmed with it yet. I'll include the manual of the MFJ-1214 PC as an attachment so that you won't have to look for him. Thank you in advance for your help!

  ~ Zekelegge ~.

  I understand (from my brief overview) out of the box-MFJ-1214PC, this offer box decoder output series computer.  The computer (50g in your case) will have the software to read message series and then convert that to an output for display.

  BartDb gave you the right answer.

  A serial cable with the correct speed level and reversing lever to manage as well as the 50G has a RS-232 signal to the outside world is the ideal solution.

  However, make sure that the output of the decoder box series package can be understood by the 50 g. aud, bits, etc.   (you have the set-top box manual, so you'll have to look that up)

  the streamsmart is not an aggregator of serial port.

  in other words, these connectors DIN of Qty 4 on the front do not accept series rs-232 input and send then to 50 G.

  I'm not an expert, streamsmart more info on these boxes is rare to find.  The probes are even more rare.

  However, I know that the 4 connectors are for the analog-to-digital conversion in the probes.  The streamsmart works as a "data logger" in which he sees the input probe, the A/D converted, then sends it to the 50G (or a computer via the USB port).

  In addition to the solution of Bart, there was another named Tiwag forum poster who created a serial cable and displayed a schematic representation of the cable.  This information can be found here:

  https://groups.Google.com/Forum/?fromgroups#! searchIn/comp.sys.HP48/serial$20port/comp.sys.HP48/ltcane1jSOw/uHyw2Ti03kgJ

  to see an example of programming to use the serial port of 50G, you can reference the following hpcalc GPS data collection program.

  http://www.HPCalc.org/details.php?id=7105

  It is written in userrpl so can be crossed with the reference of users advanced for the translation of the syntax.

  It seems that the main routine of concern for the comm to the gps is in the file "GPS >.

• Satellite A200 - Sierra data card is not working properly because of the com port

  Hello

  I recently used a sierra on Satellite A200 computer laptop data card and devices Bluetooth is to share with the data card com port and lead to the client cannot find the data card.

  I tried the data card in lenovo t61 and another computer laptop manufacturer, all of them are working properly.
  The question seems to casue of the Satellite A200 laptop.

  Everyone meets it or advice please!

  Thanks in advance!

  Hello

  The data card Sierra uses the same ports com as the internal module of BT?
  Well, in this case, you have an opportunity:
  You can assign the different port com on the data card Sierra

  Check if this is possible in the Device Manager.

  On the other hand, you can try to install first the data card Sierra, then BT stack
  Perhaps it would be too much work

• mouse randomly does not meet the flow, ideas on why and how to fix it?

  every now and then he does not meet the movement vertically or horizontally, its becomes quite annoying and had no idea why its happens or how to fix

  Check that the light under the mouse has no dirt top card, as long as your mouse pad is clean.
  Try the mouse in another USB port in order to verify that you are using is not defective.
  Try a different mouse is you still have a problem after doing the above to check if the mouse is defective.

• iPhone 7 will not play audio via the USB port on the car.

  When I plug my iPhone USB port 7 more in my car (15 Jeep Grand Cherokee), the artist/song/podcast information appears on the screen, but the sound plays through the speakers of the phone.  I have confirmed that my settings are all the same as they were on my 6s, who played without any problems via the USB connection.  Bluetooth streaming works fine - no problems at all.  Any ideas, or is this a problem similar to that people have with CarPlay?

  Welcome to Apple Support communities, kevo.mac!

  Congratulations on your new iPhone 7 more! I see that you connect with your Jeep Grand Cherokee using the USB port. Everything seems to work fine, except that the music plays through the phone instead. I'll be happy to help you to get this working.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  If you are using USB playback

  Restart your iOS device and your car.
  Connect your iOS device to another stereo USB port (if you have one).
  Try another USB cable.
  Update your iOS device.
  Install the updates to the firmware of your car radio.
  Test of audio playback from a different application. If you can not play audio from a specific third party application, contact the developer of the app for help.
  If you can not play audio from an app Apple, contact Apple technical support.

  Enjoy your weekend!

• Thunderbolt Display 27-inch TV using the HDMI port Minidisplay

  My setup is macbook air, Thunderbolt Display, 55 inch TV.

  Wanted to know if I plug Thunderbolt display on TV through HDMI Adapter Mini DisplayPort / (Thunderbolt), it will be able to display of Macbook Air, Thunderbolt display and TV even time?

  Thank you.

  The Thunderbolt ports and displays: frequently asked questions (FAQ) - Apple Support

  An alternative would be to buy an Apple TV, then use AirPlay on your Mac to stream content both Thunderbolt display, Mac and TV, but the TV must be HDTV.

• I cannot set the outgoing port Thunderbird 38.0.1.

  Thunderbird 38.0.1 does not allow me to set the outgoing port, parameters of account or in the Assistant accounts again. To be able to do was my only reason for considering change of Qualcomm Eudora. This flexibility is apparently available in earlier versions. It is now a feature requiring the paid version?

  Thunderbird is not free so no idea what you are talking about a paid version.

  The menu bar, select Tools - Account Settings

  At the bottom of the account from the list on the left side is Server outgoing (SMTP)
  As the name suggests, you configure the outgoing server there.

  No menu bar tools showing? Press the ALT key.

• Which side is the usb port 3 on a 2015 macbook pro with the retina display?

  Which side is the usb port 3 on a 2015 macbook pro with the retina display?

  I found the answer. It's the left side near the microphone.

• Using the Ethernet Port on a remote Express

  I have just moved into a new House and has Verizon FiOS installed.  Verizon provided a router modem combination like my main wireless service.

  I have an IP phone that I need to use in my office located in another room and the Verizon tech said that it would be very expensive to run a separate line in this room.

  I have a generation current Airport Express.  I would like to use the Express to join/expand the wireless network in the office, but my question is, the LAN on the Express port will be active so that I can connect the IP phone to the LAN port and use the phone via wireless Express?

  If possible, can you give us some guidance on how to configure the Express?

  Thank you

  David

  I would use the Express to join the network wireless Office

  The AirPort Express, expected to be able to 'join' the wireless network that is provided by the modem/FIOS router, assuming that the device uses wireless standard... parameters and... He Express is located where it can receive a strong signal of the FIOS router/modem wireless.

  But, the Express can not "extend" or "repetition" of the FIOS wireless network, given that "expand" function requires the Express receive a wireless signal from another Apple wireless router.

  .. .my question is, the LAN on the Express port will be active so that I can connect the IP phone to the LAN port and use the phone via wireless Express?

  Yes.  In fact, you can use the LAN or WAN port, or both at the same time... because both ports behave as LAN ports when the AirPort Express "joins" a wireless network.

  can you give us some guidance on how to configure the Express?

  What camera... Mac, PC, iPhone / iPad... will you use for this?  What operating system is that it uses?

• How can I get multi channel audio via the HDMI port on an early 2015 MacBook Pro?

  I try to get the 7.1 audio channels to flow from my MacBook Pro to a cinema set up. The display works fine now I plug the HDMI in however the sound still Mac speakers. I checked the settings and no HDMI output is available. An airtime option is available, but that returns only two channels as a maximum to the receiver. When I go to the configuration of the source on the receiver it receives video at 1080 p 60herts however it is specifically stated No Audio from the Source.

  Also, I have connected my iPhone 6 s more using an Apple through the same HDMI cable adapter and it works perfectly. We also use HDMI with our PS4 occasionally and it works perfectly, even with the 3D.

  Thus, the MacBook Pro is early 2015 with an i5, the receiver is a Harmon Kardon AVR 2700 (we run 7.1 channels of this) and we are connecting via the HDMI port through a 50 ft HDMI before. The receiver sends the audio to a projector with 1080 p 60 hertz if it changes anything...

  Also if it helps the receiver supports dts - hd master audio decoding, Dolby True HD/Digital Plus decoding, HDMI 1.4 (HDMI is compatible 2.0), as well as multi-channel input and PCM and linear PCM.

  I use a "Behringer UCA202' audio device I bought on amazon.com for only $29.

  It works very well for the audio 5.1 or 7.2. Works connect optical toslink. Just plug it into a usb port on your Mac and a cable optical toslink to your AV receiver.

  My Yahmaha 7.2 audio/video receiver is measuring process the digital signal in THX, DTS, Dolby digital Pro logic, a cinema, etc.

  

• Use Firefox all the time, but on the page where it tells you what plug-ins are oudated there is a message saying that I do not meet the requirements to run FF.

  I have an iMac. Mac OSX... Version 10.5.8 I had Firefox installed for a long time and use it more often than Safari these last time. However, when I'm on the FF page where it tells you what plug-ins are very good, and which are outdated (with a warning), at the top of the page, there is a message saying that my computer "does not meet the requirements to run Firefox. And yet I have it and use it! Maybe the message actually means that I can't upgrade to the latest version? But also I don't know if I should go ahead and try to download plug-ins up to date. Any input would be greatly appreciated. Thanks in advance.

  You can also
  Try to update to 10.6 and more if your computer supports (costs less than a new computer)

  • https://discussions.Apple.com/thread/4537537?start=0 & tstart = 0

• Open the TCP Port

  I'm trying to implement a TCP port to listen to music on my home network through JRiver. The server and work remotely on my home network. But I want to access on the network side.

  I use ATT Uverse to access the internet. I disabled wireless and ATT modem to transmit to my Airport Extreme.

  I have these instructions to configure the port:

  1. Open AirPort Utility and change your AirPort Extreme or AirPort Express. Select the tab network (image). Select the sign of closer Port settings box. The Type of Firewall entry should be IPv4 Port Mapping. Enter a description like JRiver Media Center. Enter the Public 52199 TCP Port. Enter the private IP address, it's the IP address of your JRiver Media Center PC at home. Enter the TCP Port private 52199. Click on save, and then click Update. (image)

  When coming to this page, however, the firewall main entry box Type "IPv6" entered and grayed out, so it cannot be changed.

  Any help would be greatly appreciated.

  Sorry, but no image is available.

  However, to start, running the AirPort Utility > select the AirPort Extreme > change > Internet tab > Internet Options...

  What is the value to configure IPv6? If it is 'Automatically', change it to "Link-local." only (Note: I'm assuming that your ISP DO provide you IPv6 service still.)

• Why is the Admiral of Motorola, who meets the conditions, not supported?

  Unless I'm mistaken, it has a resolution of 640 x 480, Qualcomm Snapdragon S2 MSM8655/1.2 GHz Scorpion which I believe uses ARMv7, Android OS v2.3.5, and 512 MB of RAM which seem to meet the listed requirements. Still listed as not compatible in the play therefore store it requires installation of the apk manually if you want to use. Have not had any problems with it and am looking into the causes of incompatibility.

  This tracking bug may be related?

  Bug 810971 - peripheral on Google marked as incompatible game despite recently supported - smallScreens manifest statement change?