Nights Sleepness SEO Fail!

Similar Questions

• Sleep ++

  Last night, sleep ++ was still on my watch and worked. I just noticed that it has disappeared from my watch. The app is still there on my iphone but when I look in the app shows sleep ++ app no longer. Any ideas?

  Hello

  The following steps may help:

  • Update sleep ++ on your iPhone with the latest version (via App Store > updates), which ensures compatibility with iOS 10 and watch OS 3.
  • If you have not already done so, update your iPhone and Apple Watch to the latest version of the software, from your iPhone:
    • Update the software on your iPhone, iPad or iPod touch - Apple Support iOS
    • Update the software on your Apple Watch - Apple Support
  • If it is not already installed, add sleep ++ your watch again:
    • On your iPhone, in the application of the watch, go to: My Watch (tab) > scroll down and tap sleep ++ > turn on App Show on Apple Watch.

  More information:

  https://iTunes.Apple.com/GB/app/sleep++/id1038440371?Mt=8

• Time Machine backup fails because "there is not enough space on the «DiskStation «»

  My backups regular TimeMachine to DiskStation stopped working a few months ago.  I thought it was because I ran out of space but now I installed an extra 1 TB RAID and I always get this error message.

  Here is the chronology of events that led to the error message.

  16/01/10 23:09 - Backup started manually (1.47 TB TB 2.45 available):

  

  16/01/10 23:11 - preparation of backup... (1.47 TB TB 2.45 available)

  16/01/10 23:15 - "backup: zero KB of 63.8 MB, calculating time remaining..." »

  16/01/10 23:22-2.1 MB saved 63.8 and the first estimate of the remaining time: 'about 4 hrs.

  

  16/01/10 23:50 - now 2.3 63.8 MB MB, 16 hours left (I'm ready for bed).

  16/01/10 23:55-5 minutes later and it backed up 419 MB!

  16/01/11 00:55 - an hour later and it is up to 6.72 GB but the gas target increased to 7.39 GB (I went to bed)

  16/01/11 06:50 - next day morning and it's up to 23,76 GB and the goal is now to 26.13 GB

  

  16/01/11 18:49 - I go home at night and it failed.

  

  

  

  Here is the view viewfinder of the TimeMachine file that I am trying to backup (note, a lot of disk space):

  

  This is the view of the Inspector of it:

  

  System details:

  -MacBook Pro 2013 with OS X 10.11.2

  -LAN WiFi Pace 2Wire998 router with DiskStation connected by Ethernet, MacBook Pro by WiFi

  -Synology DiskStation DS411slim with 4 x 2.5 "hard drives installed.

  A device third-party network attached storage (NAS) or a router is unsuitable for use with Time Machine, especially if it's your only backup. I know that's not what you want to hear. I know that Time Machine accepts the device as a backup destination. I know that the manufacturer says the device will work with Time Machine, and I also know that it usually seems to work. Except when you are trying to restore and find that you can't.

  Apple has published a specification for network devices that works with Time Machine. No third party provider, AFAIK, does meet this specification. They all use the application of Netatalk incomplete, obsolete Apple Filing Protocol.

  Apple does not endorse any device third-party network for use with Time Machine. See this support article.

  Network backup, use as destination an Apple Time Capsule or an external storage device connected to another Mac or a 802.11ac AirPort base station. Only 802.11ac base stations support time Machine, not older model.

  Otherwise, use Time Machine at all. There are other ways to save, although none of them are nowhere near as effective or as well integrated with OS X. I don't have a specific recommendation.

  If you are determined to continue to use the device with Time Machine, your only remedy for any resulting problem is the manufacturer (who will blame Apple, neither you nor anyone else but herself.)

• Upgrade to 10.5 fails - not enough disk space in common Partition - db_hist using more space

  Hi all

  Tried upgrading our 9.0 (2) UCCX SU1 HA deployment 10.5 (1) last night and it failed with the following message.

  There is not enough disk space in the common partition to perform the upgrade. Please use the platform command line Interface or the tracking tool in time real (RTMT) of free space on the common partition.

  RTMT reported common disk space used as 94%. RTMT using we put the LogPartitionHighWaterMarkExceeded at 55% and waited for the disk space free. No luck.

  A bit more investigation and it turns out there is a database called db_hist_dbs in the common partition which is 33 GB in size. This is the command and returned the output that we used to find this point.

  See the common diskusage

  8.0 K/common/Ministry of health

  33G/common/var-uccx/CBD/db_hist_dbs

  1.6 G/common/var-uccx/CBD/temp_uccx_dbs

  201M/common/var-uccx/CBD/uccx_er_dbs

  1.6 G/common/var-uccx/CBD/uccx_ersb_dbs

  37G/common/var-uccx/dbc

  37G/common/var-uccx

  /Common/ontape_backup.gz 16 M

  8.0 K/common/cancel_upgrade

  Using this command - show uccx dbserver disc - we can see that the db_hist database file is actually 80% free! Output of the command here-

  SNO. TOTAL SIZE (MB) OF NAME OF DATABASE SIZE (MB) USED THE FREE SIZE (MB) TO ONE HUNDRED FREE

  ---- ------------------ --------------- -------------- -------------- ------------

  4 db_hist 34508,6 6836.9 27671,7 80%

  Anyone have any ideas on how to reduce the file size of the database in question? Is it still possible? Or what are our options to work around this problem and perform the upgrade.

  Thanks in advance

  Jeff

  You run in this bug: CSCul18667

  Symptom:
  Log purge CUIC is not clean file JMX. Upgrade may fail for lack of space.
  "show status" command s show that logging consumes 99% of space

  Workaround solution:
  Can remove by going to RTMT-> central tracking log & -> remote browse-> nodes-> 'specific node'-> UCCX-> Cisco Unified Intelligence Center Servicability Service-> jmx-> select all-> Delete

• How to get the license to esxi 4.1 will be accepted on newly reinstalled host (OEM HP Proliant)

  I just spent the day of two failed disks in two tables on an old HP proliant ml350 g5

  It seems that it has been deployed with HP installed esxi 3.x (based on the packaging of HP where the USB was) and later put upgraded to 4.1.  It is a very low installation - the esxi is running stand-alone.

  As part of the recovery process the berries, I deleted (accidentally) the USB in the box that hosts the esxi installation.  So I took out the CD and HP instead of the brand HP esxi 3.x (like on the box label), there was a serious esxi 4.1-labelled CD (which corresponded to which will be executed on the box before the problem).  I therefore installed from the CD, got all VM rerun, ghettoVCB (re) - on-demand via crontab and then to apply the license.

  The box of HP brand has a certificate (with bar code) showing that I have "permission to use" esxi, but no key.  4.1 key I used elsewhere is not accepted in the dialogue to "transfer license".

  -Where am I going to solve this problem?  Do I need a key for HP? If so, what should I go for?  My experience with HP for something like this are less favourable one that treats the monopoly of electricity, so any help would be appreciated.

  Thanks in advance!

  This link from HP

  HP Integrated VMware ESXi 4.0 and updates Start Guide to 190 KB

  ... Upgrade to a license (page 7... such as ESXivirtualization software.) Hosts provide processor... solution without the need for separate external... the right key when you are prompted to...

  Last updated: April 15, 2010
  (aka http://tinyurl.com/ma9m7kz) is a pdf file that brings me to the vmware website, which, when I log in, shows me my license key 4.1 esxi - which is not accepted by the process of "transfer license".
  So in desperation I decided to type it in again, after a good night sleep and PRESTO, it worked.
  Which is weird, because yesterday I was cut and paste from the website - and paste it into Notepad first to remove any characters dog wandering or unacceptable, and someone had read back to me.
  Thanks for the help!
  
  

• Why can I not see my file in Lightroom?

  I have a problem see a file in LR 4.2 when it is located in the folder where I want it to be.

  I created a composite tiff image of two raw files residing in two different folders.  I had exported the two LR like TIFF raw files, open the TIFF in Photoshop CS5, then grouped into a file of multilayer tiff to create a composite file 600 + MB.  This composite was recorded in Photoshop, under a new file name using the "save under".  I knew that the new composite file would not be in the LR catalog, until I imported it.   When I imported, the picture went in a new folder named date (call the folder "A").  So far, it all makes sense to me.

  From that point on things got funny.  Working in LR, I tried to move the composite single file in the folder that make up one of the files is from (let's call it 'B' folder).  The move has failed. Instead, I got an error message saying that the file already existed in 'b '.   I couldn't see the file in 'B' using lightroom, but MS Explorer revealed that the file was there.  I don't understand how he got there.

  Still trying to get my composite 'B' recognized by LR, I first deleted the composite 'B' using Explorer, then went into LR and moved the file 'A' (where recognized LR), in 'B '.   Still not good.  LR does not display the file in 'B', but it appears in the Explorer.

  I guess I could live with this composite file into its own folder, 'A', but this isn't really where I want to.  More importantly, I don't understand why I can't see in LR in the folder where I want to.

  Help is appreciated.

  My catalog file is corrupted?

  The XMP files have something to do with it?

  The size of the file (> 600 MB) a factor?

  Any suggestions?

  Win 7, LR 4.2, PS CS5.

  TIA

  Jerry

  Problem went away this morning!

  I tried this step once again (again) after my computer starts:

  Still trying to get my composite 'B' recognized by LR, I first deleted the composite 'B' using Explorer, then went into LR and moved the file 'A' (where recognized LR), in 'B '.

  This time it worked, the file moved successfully and normally appears in LR.

  Don't know if the re-booting helped, or I made a stupid mistake that healed a good night sleep to.  If later, I apologize to all those who are scratched their heads on this one.

  Thank you

  Jerry

• RAW files are not open in Elements 8

  I downloaded and installed several actions for elements8 this afternoon.  I also downloaded a couple for photoshop which were auto install.  I clicked on landscap_and_sky_action_by_fcpr, rar.  I thought it would open and I could install the action like others.  Apparently, it is installed as if\t was supposed to (just in the woring program.)  Some little time after that I tried a new RAW file downloaded from my camera at home.  I got the error message, failed to open (file name and full path), because it is the wrong type of file.

  I tried to open raw files with the file open and file open as specifying that the file is a raw file.

  I also tried to open an older RAW file with the same results (previously opened before today).

  This is the first time I had this problem.  I've been using RAW files for the last year and a half without any problems.

  My best guess is that rar file corrupted a file somewhere, but I have no idea where.

  Finally, I uninstalled items 8 and reinstalled.  The same problem.  I noticed that during the uninstall of the elements, it does not erase the directories and many files.  I have hestiated because I have a massive set of photos in the Organizer, have updated the Camera RAW database (after it worked) and added several features (effects) to the elements.

  Any suggestions on a fix.

  Ed

  Sometimes I more think that solutions.  After backup of the organiser, who needed to do anyway, and get a good nights sleep, I had an idea.  Why not replace the Camera RAW 6.2 file and see if that fixes the problem.  Yes he did.  Camera Raw works as if should be, and I don't have to replace all these add-ons.

  Thanks for all the help.  Barbara you were on the right path, speaking to the Camera Raw files that give me probably inspired for the replacement.  I noticed that on my computer the camera RAW file was not exactly the location given by Adobe.  It is under Programs86 instead of programs.

  I'll close this discussion.

  Ed

• No data no on-screen Lightbeam

  I have 64 bit Windows 8.1. I enabled add-on, but I don't see all the data on the sites I visited. He told me that I did not visit everything, which is not true. What should I do?

  For some reason, after a good night sleep, Lightbeam now seems to work. I have nothing to make this happen.

• Driver monitor with XP on Satellite Pro C660-2CN problem

  I get 2 monitors Plug-and-Play - 1 ok, the other cannot start (Code 10)

  The laptop is also not go into sleep mode.
  The display turns off standby mode, but the laptop can be used.
  I also have an error ACPI event ID: 43 - the system sleep operation failed.

  Unfortunately no driver XP for this laptop.

  I think that this could be related to incorrect Graphics Driver installed.
  Device for my integrated graphics card ID is:
  PCI\VEN_8086 & DEV_0116 & SUBSYS_FC901179 & REV_09

  I am currently using Intel HD Graphics 6.14.10.5384 - the pilot didn't say not that there problems in Device Manager.

  Device ID for my Plug-and-Play monitor that will not start:
  Monitor\LGD02DC

  Has anyone installed XP on this laptop and if so what graphics drivers they use.

  Hello

  PCI VEN ID and DEV ID may be useful in order to perform a search on this page:
  http://www.PCIDatabase.com/

  The laptop seems to be equipped with Intel HD graphics chip 3000.
  If the drivers must be compatible. You must also install the Mobile Intel HM65 Express Chipset for Win XP driver since this chipset is part of the motherboard.

  But its interesting that you said that an external monitor work correctly and the other doesn t you try to use two external monitors at the same time?

• Time Machine breaks down during the work week, working all weekend after preferences rebuilt

  End of 2013 the MacBook Pro 13 "Retina display, 16 gig RAM, OS x 10.10.5, gigabit networks are home and work, NAS at home only.

  MacBook is used as working on simple business network machine all week. Time Machine off and save a couple hundred K and then crashes when I connect to home network at night. Same thing happens when I return to the home network for the weekend. I have disable TM, kill the TM preferences, restart to create new ones, back up on my home network NAS all weekend without problem. I turned off TM before going to work on Monday and back at home Friday night, and it fails. If the routine is now restore preferences TM Friday night, let the backup of its contents all weekend, turn off TM and go to work all week.

  I would like to have the security of offline backup that comes with the TM run all the time.

  It was suggested elsewhere to rebuild the Spotlight database. It did not work. I use locate on the command line and have rebuilt the database too.

  Any suggestions?

  A device third-party network attached storage (NAS) or a router is unsuitable for use with Time Machine, especially if it's your only backup. I know that's not what you want to hear. I know that Time Machine accepts the device as a backup destination. I know that the manufacturer says the device will work with Time Machine, and I also know that it usually seems to work. Except when you are trying to restore and find that you can't.

  Apple has published a specification for network devices that works with Time Machine. No third party provider, AFAIK, does meet this specification. They all use the application of Netatalk incomplete, obsolete Apple Filing Protocol.

  Apple does not endorse any device third-party network for use with Time Machine. See this support article.

  Network backup, use as destination an Apple Time Capsule or an external storage device connected to another Mac or a 802.11ac AirPort base station. Only 802.11ac base stations support time Machine, not older model.

  Otherwise, use Time Machine at all. There are other ways to save, although none of them are nowhere near as effective or as well integrated with OS X. I don't have a specific recommendation.

  If you are determined to continue to use the device with Time Machine, your only remedy for any resulting problem is the manufacturer (who will blame Apple, neither you nor anyone else but herself.)

• LaserJet m225dn mfp pro: printer freezes up, power cord wrong or bad grounding?

  Hello.  We have an ongoing problem with this gel printer (backlight on).  I can say that it's okay if it passes in the standby mode.  If after the default, sleep, standby fails, it is always locked and requires a reboot.

  It comes with the power supply cord is too short, and relocation is very difficult.  I have been using two (seem to be very good) of the longer computer power cords.  One is 10' and the other is 12'.

  I tested the ground taken with a multimeter and it revient.2 v, which is not 0, but I think is pretty close.  There are other things on the same circuit.

  Problem is I can not test the normal short cord and easily keep the printer connected to the USB cord and a fax machine.  Would be a 10 or 12' power cord (no UPS online) will be enough to lock up this printer?   Thank you.

  I found the solution myself.  For a longer length, 14-gauge is necessary.  I have this and it seems to fix the problem.  He could have a blockage, but I'm not sure.  Been working normally for more than a week with this 15' cord

  Cable SF, universal 15 foot cord 14 AWG - IEC320 C13 to NEMA 5 - 15 p SJT 15 has

• Cannot install windows update, error: 80070020

  Original title: 5 updates Windows do not install KB2507938 KB2532531 KB2555917 KB2533623 KB905866

  Since 13 July, Windows Update suggested I have install these updates.  I agreed and they are then downloaded and installed... or so I think.  When I turned off my computer at night, the updates fail and say they will try again the next day.  This happened every day since.  They simply won't be installed and code Error 80070020.  I checked and my Windows Vista Home Premium installed Service Pack 2.  Any help would be appreciated!

  All the best,
  Mary

  Hello

  I suggest you try the steps from the link below and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070020

  http://support.Microsoft.com/kb/883825

  Hope this information is useful.

• CLEANING: WINDOWS 7 L702X

  I usually leave laptpp running during the night (sleep / sleep...)

  This laptop from week appears npt to Hibernate (ie the light above the keyboard again.

  McAfee appears to recently updated on a frequent basis. Any connection?

  However my main query is: -.

  Yesterday morning when going through wifi (turned off wireless at night to save battery)

  message on windows 7: 'Cleaning' or similar... don't turn off computer... full update of windows... xx... or very simiar

  Took several minutes... went... circular icon... finally came the time when heard Bell windows... machine seems to work OK... nothing unusual...

  currently have 10 windows home page update query... to hide... (I have no intend to switch to windows 10)

  Machine seems to work without any new problems. Assessment OK

  Thank you very much

  I currently have the windows 10 home upgrade request

  Jesse

  I do not understand your answer.

  I won't switch to windows 10. I've been advised to hide the windows 10 home upgrade. However he kept installed beng and advised the to hide. tryijg to learn more.

  Then got the message of cleaning. Want to know what it means. Seems to work OK

• ListView - elements that are currently visible?

  Hello!

  I was unable to find a method how to check what a listview items are currently visible on the screen and which are hidden. Is there a method since beta 3 or is this planned for the Beta4?

  ScrollToItem and scrollToPosition are since the Beta3 implemented. But how to read that data?

  Any ideas?

  Well, after a night sleeping on it I retried it with your approach a second time.

  This is my solution for a horizontal scrolling list view in which each item in the list is exactly as big as the screen, so there is always only one item which is the most visible element in the list:

  listItemComponents: [
      ListItemComponent {
          type: "item"
          Container {
              attachedObjects: LayoutUpdateHandler {
                  id: luhPosition
                  onLayoutFrameChanged: {
                      lblTest.text = "XXX" + luhPosition.layoutFrame.x + " - " + Qt.pageHandler.layoutFrame.width
                      if (luhPosition.layoutFrame.x >= - Qt.pageHandler.layoutFrame.width / 2 && luhPosition.layoutFrame.x <= Qt.pageHandler.layoutFrame.width / 2) {
                          //call here a C++ routine to deliver the ID of the currently visible panel in the ListView:
  
                          testArea.background = Color.Blue
  
                      } else {
                          testArea.background = Color.DarkRed
                      }
                  }
              }
          }
          Container {
              preferredHeight: Qt.pageHandler.layoutFrame.height
              preferredWidth: Qt.pageHandler.layoutFrame.width
              background: Color.Green
              id: testArea
              Label {
                  id: lblTest
                  text: "Test"
              }
          }
      }
  ]
  

  I created a second LayoutUpdatehandler at the level of the container root in which my ListView is incorporated to get the screen resolution and provide the object inside the Listview using:

  onCreationCompleted: {
      Qt.pageHandler = pageHandler;
  }
  

• Dell inspiron 17r do not reconnect to wifi after wake up

  Hi, I own a Dell Inspiron 17r laptop computer n7110 with the map n 1030 of the Intel centrino wireless. Whenever my laptop go in mode "sleep" she fails to reconnect to my wireless wake. My router shows up in my list wireless and I can reconnect manually but even if it takes a few minutes and displayed a message that it takes longer than usual. Any help to fix this would be greatly appreciated.

  Hello

  Thanks for posting your question in the Microsoft Community.

  In a wireless (Wi - Fi) network, the computers are connected by radio instead of wire or cable signals. Advantages of wireless networks include mobility and the absence of unsightly wires. This problem may occur due to several reasons such as faulty driver, security software, 3rd party software or application etc.

  Before troubleshooting, provide us with information.

  1. what security software you use in your computer?

  2. don't you make changes to the computer before this problem?

  Follow the steps below.

  Method 1:

   

  Uncheck allow the computer to turn off this device to save power option in Device Manager and check.

  a. click on Start and go to Control Panel, in the Panel click on the small icons to display.

  b. search for network and sharing Center and open it.

  c. on the left side, you will see an option that says "change the map settings. Open it.

  d. you will have two local and wireless connections. Right-click on Wireless one, and then select Properties.

  e. now, click CONFIGURE.

  f. you will see 5 tabs, click on the last one that says "power management."

  g. now simply UNCHECK the first box that says "allow the computer to turn off this device to save power".

  Method 2:

   

   

  You can update the network drivers and check.

  http://www.Dell.com/support/drivers/us/en/04/product/Inspiron-17R-n7110

   

  For reference:

   

  Update a hardware driver that is not working properly: http://Windows.Microsoft.com/en-US/Windows-Vista/Update-a-Driver-for-Hardware-that-isn ' t-work properly

   

  Wireless and wired network problems:

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  If you need further assistance on this topic, let know us and we will be happy to help you.