Driver monitor with XP on Satellite Pro C660-2CN problem

I get 2 monitors Plug-and-Play - 1 ok, the other cannot start (Code 10)

The laptop is also not go into sleep mode.
The display turns off standby mode, but the laptop can be used.
I also have an error ACPI event ID: 43 - the system sleep operation failed.

Unfortunately no driver XP for this laptop.

I think that this could be related to incorrect Graphics Driver installed.
Device for my integrated graphics card ID is:
PCI\VEN_8086 & DEV_0116 & SUBSYS_FC901179 & REV_09

I am currently using Intel HD Graphics 6.14.10.5384 - the pilot didn't say not that there problems in Device Manager.

Device ID for my Plug-and-Play monitor that will not start:
Monitor\LGD02DC

Has anyone installed XP on this laptop and if so what graphics drivers they use.

Hello

PCI VEN ID and DEV ID may be useful in order to perform a search on this page:
http://www.PCIDatabase.com/

The laptop seems to be equipped with Intel HD graphics chip 3000.
If the drivers must be compatible. You must also install the Mobile Intel HM65 Express Chipset for Win XP driver since this chipset is part of the motherboard.

But its interesting that you said that an external monitor work correctly and the other doesn t you try to use two external monitors at the same time?

Tags: Toshiba

Similar Questions

  • Satellite Pro C660-1J3 - problem with OpenGL / Edrawing

    Hello

    I hope you can help me with the following problem:

    I need to work a program that we OpenGL for drawing, but still the program does not work if it opens the drawings, the following information, always on the screen:

    "OpenGLView: EnableRenderContext failed" and the stop-work program.

    So I dry to update the driver grafik, but it does not work. I found a thread on this forum, but http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=67241 his looks.

    I am at the part:

    Thank you, useful, but still having problems. I downloaded "Intel® Chipset Device Software (INF Update Utility) v 9.3.0.1019" and installed it the way you say, but the computer says I'm already under the latest version of the driver, which the computer is 8.15.10.2622. I'm running Windows 7 x 64 Home Premium. I can't forget the old version and use the new version.

    I don't really know the command SETUP-OVERALL, where I can find this command...

    Please help me, I need the program to work!

    Computer laptop-type: Satellite Pro C660 - 1J3 PSC0RE and I we Windows 7 Professional 64 bit

    Thank you alex
    PS Sorry for my English ;)

    Post edited by: alexk

    Hello

    I think the drawing application needs the graphics driver that supports OpenGL.
    To my knowledge, the driver of the Intel page should already contain the OpenGL.
    The Satellite supports graphics Intel HD (Intel HM55) so I think that you should use the driver from the Intel page, even if the update utility indicates that you are using the latest driver.

    I think that you need to uninstall the old driver through the Device Manager.
    In addition, check whether it should be uninstalled in the control panel-> software.

    Then download the latest driver for the Intel HM55 chipset, and install it via the Device Manager.
    You do this by using the Advanced installation procedure that will force windows to select the driver from the driver's record, that you have downloaded from the Intel page.

  • Satellite Pro C660 - keyboard problems

    This issue is one for computer laptop Toshiba Satellite Pro C660-1UX running Windows 7 Home Premium Service Pack 1.

    Some of the keys on Board (E, T, U, I, O, A, B, N, and the Enter key) fail to register.
    All keys tested so far seem to register normally.

    When you connect an external USB keyboard, all the keys work properly. When you use the integrated keyboard or external USB keyboard, however, pressed some key is selected for about 2-3 seconds so that his character register. This makes typing incredibly slow and is naturally unacceptable.

    I checked the Manager of devices looking for errors, but can't find one. The keyboard driver is classified properly installed and functional, and driver update indicates that the latest version is in already in service.

    I've also scanned for viruses using Spybot and Malware bytes and also with laptops own antivirus software pre-installed. All the analyses of the entire system refer a none found the message of threat.

    I read that the keyboards on these machines can sometimes be problematic, which could respond only to edge, some function keys. The fact that all the external USB keyboard keys work seems to confirm this. However, the fact that the keyboard both onboard and external is affected by the same slow pressure might also suggest a bios problem - but that this laptop computer is several years old and working perfectly, why bios suddenly would cause this problem.

    I visited the Toshiba site and based on this laptop with the part number: PSC0ME-02100SEN, I have concluded (rightly or wrongly) that the correct bios download version is 1, 70 - WIN, only when I read the following installation instructions http://aps2.toshiba-tro.de/kb0/HTD9502M10000R01.htm bios
    I became quite concerned, like installing the bios update seems far from simple.

    Does anyone know if it is possible to download and install the bios right through an update automated versus manual download and installation step by step, which, if not carried out as planned, could make the laptop completely unusable.

    Has anyone reading this post experienced similar problems with this make and model laptop and was able to return successfully to the good operating condition. If so, how?

    All constructive advice would be welcome.

    > When you connect an external USB keyboard, all keys work correctly.

    This means that the keyboard controller is OK and the internal keyboard is defective.
    To resolve this problem of keyboard, internal keyboard needs to be replaced.

    > However, the fact that the keyboard on board as external is affected by the same keypress slow could also suggest a bios problem - but this laptop computer is several years old and works perfectly, why bios suddenly would cause this problem.

    Hmm I n t think so
    The keyboard delay can be bound to parameters.
    You can check this in the control panel-> keyboard

  • Satellite Pro C660 graphic needs driver upgrade for Adobe Lightroom 6

    I tested 5 Lightroom on my Satellite Pro C660 and it worked fine.

    I decided to do it, and that week Lightroom 6 came out, so I bought Lightroom 6.

    LR6 gets to the start screen, then stops and closes the Windows7.
    I contacted Adobe and they went on my machine and identified the problem as being the graphics card and says I need an update of the driver.

    I've been on the Toshiba site and it says that the latest driver is 8.15.10.2189, which is the one I currently have (and was changed in 2012).

    I've been on the Intel site and their obtrusive says that the machine has a pilot custom then contact Toshiba.
    I looked around the Intel site and tried to install that seem to be plausible drivers, but have not found one that would install.

    My installation includes a monitor LG 22 "connected to the laptop with the spread of the desktop on both screens (laptop and monitor).

    No one knows what would be the upgrade of the driver I need or how can I know?

    James

    The page Intel graphics driver can be used, and you can also download the driver directly from the page.

    This CPU does support your laptop?
    What Intel GPU (Intel HD graphics chipset *) is the support of laptop?

    The Intel download page provides a driver Intel as an exe or zip package
    https://Downloadcenter.Intel.com/

    You need to download and unpack the zip package.
    You will then be able to update the driver in Device Manager, choose the Advanced installation update procedure.

  • Cannot install Win 8 - Satellite Pro C660 does not detect HARD drive

    Hello

    My HARD drive died, so I decided to upgrade my Satellite Pro C660 - 1 9 to an SSD.
    I made a USB bootable with Win8 and starts very well.

    The problem is that it does not detect my SSD, so I can proceed with the installation.
    SSD appears in BIOS but not in Windows Installer.
    He said that there is a missing driver.

    I downloaded the AHCI drivers (XP, only ones available) and even in this case, after you have selected the only rider that appears, it says no new device found.

    I tried to change the SATA from AHCI mode to compatibility mode and it's the same thing...

    What can I do?

    Thanks for the help.
    Best regards
    Bruno Moreira

    More old Windows XP need a driver AHCI Intel's but I think this isn't a problem with SATA driver missing because as far as I know Windows 8 as well as Win 8.1 already contains the drivers to recognize the SSD or HARD disk drive.
    In addition, the installation of the OS should be possible even if the driver would be added for this procedure, you must use the "compatibility" mode
    As you say, the compatibility mode is not working too, so I think there is another problem.

    However, page driver Toshiba also provides a driver Intel RST (Intel Rapid Storage Technology) (Windows 8 - updated) you can try to add during the installation of the OS.

    But I m wondering if you would be able to install this Win 8 on common SATA HDD.
    Have you tried to format the SSD using a different computer, then install Win 8?
    Give it a try.

  • Satellite Pro C660-2DJ - Windows 10 Upgrade and lack of Chicony Driver

    Well, Toshiba said the Satellite Pro C660 2DJ is not able to upgrade Windows 10. This time I found statement opposite on other sites and installed it. I'm happy enough, because I use it. Ah there is always a but... the Chicony USB 2 Laptop camera is registered as a device, but with (!) in yellow showing no driver. I found a driver for this device, but under Windows 7 64-bit.

    It would be very risky to install an old original driver now that Windows 10 is fine? As a rider to this, I know now there are thousands of people who were sure that their machines would be upgraded to Windows 10 and they are desperate because very little work. Thoughts, anyone?

    Win8 Toshiba does not offer driver webcam more as the operating system uses standard Windows driver.
    I did not pass my S50 - B Satellite so I do not know if I have an identical problem on my machine.

    I'm really interested if another user of the forum has the solution for this.

  • Satellite Pro C660-1LR - new HARD drive but no recovery disk

    I need help for my son who is the Satellite Pro C660 1LR laptop.

    In this portable hard drive is completely dead, I have not created a disk of recovery for this system of portable computers.
    I bought a new hard drive that is installed... However, as you guessed it I have no access to reinstall an OS, this laptop works on windows 7.

    I'm not really tech savvy so if someone can advise me please do explain to the fool proof format! I try to avoid having to buy something expensive.

    > I'm trying to avoid having to buy something expensive.
    Problem is that you don't have many options in this regard.
    If you want to have the factory again settings you must install recovery disc. You can order on https://backupmedia.toshiba.eu/landing.aspx of course is not free, but, in my opinion, without a doubt the best solution.

    You can buy the Microsoft installation disc and install the clean version. You must purchase a valid license for it.
    In this case, you must install all the necessary drivers, tools and utilities for more than one by one.

    Just in case you can get this installation of Microsoft and the free license you can save money.

    Believe me, the best solution is the original recovery disk command.

  • Cannot get the printer driver to install the Satellite Pro C660

    tried to install epson rx560 driver printer (windows 7 64-bit) the satellite pro c660 but it fails epson told me to consult a technician because the printer driver is very good

    Any help would be welcome

    I don t think that it is a mobile phone number.
    In my opinion, you should visit and check the Epson support page:
    http://www.Epson.co.UK/printers-and-all-in-ones/inkjet/Epson-Stylus-Photo-RX560/drivers-support

  • Impossible to update on my Satellite Pro C660 display driver

    Hi, I have a Satellite Pro C660-2DN, and I'm trying to update my display on the site of Toshiba UK driver as Intel takes back me to Toshiba when I do their thing driver assessment.

    I downloaded the last three display driver updates that I can't in the list that matches the C660 but none of them won't install - temporary files are extracted, but then nothing happens. Could someone help me?

    Thank you.

    And what operating system are you using?
    You have still preinstalled original Win7 64 bit home premium?

  • Keyboard stopped working on my Satellite Pro C660 2JD

    Hello world

    I have a Toshiba Satellite Pro C660-2JD.

    The keyboard has stopped working, it only works when the keyboard screen is selected as soon as I close the screen keyboard that it stops working. I plugged another keyboard that doesn't work or only works of the mouse and the keyboard on the laptop works ok. I used the Ubuntu live CD, and the keyboard works with it, but not in windows.

    I have restored the laptop to factory settings and also make a clean installation still does not work only when the screen on the keyboard keyboard works. Does anyone have any ideas of what is the problem? It seems that something prevents the loading keyboard driver.

    Krones

    Start your laptop and enter the BIOS settings. Keyboard works in BIOS mode?
    Have you tested using \Windows in "safe mode" (F8)?
    Please test and send feedback.

  • Satellite Pro C660 - BSOD for WLANs by FN + F8

    Hello!

    (Sorry for my bad English, but this is not my first language)

    I have a problem with my (Windows 7-64 bit) Satellite pro c660.

    When I want to activate or DΘsactiver wifi (fn + F8).
    I see the wifi turns on, but after 2 seconds, I got a BSOD...

    So I'm looking for drivers for my card (Realtek RTL8188CE) network and it does not work...
    I search a lot and I found this forum. I find a lot of problem of "my fn +; '. does not work"and respond you"try to install VAP. I have download this PPV to my computer and right after having extracted the files, I have this message: "Please restart your computer."
    I reboot and it still does not work... So I try to uninstall PPVS but I can't found on the Panel.

    (I now see the fn + F9 (of / activate the touchpad) does not work.)

    I have TOSHIBA Hotkey Utility version 1.62.0.28C.

    Hello

    Your message is very confusing
    First of all, I don t think that missing WLan driver would cause a BSOD.

    From my point of view you have a lot of problems with the system I m not quite sure if the resettlement of VAP would solve all your problems and I doubt that this would be solce your BSOD problem.

    So I advise to use the recovery disk to put the laptop back to factory settings. If the BSOD would still appear after that the laptop was recovered, then I guess as a hardware problem (probably faulty module WLan) causing this BSOD

  • Re: Magenta/Purple mount screen Satellite Pro C660-2JR

    Hello

    I just brought a new laptop Satellite Pro C660-2JR and a few hours after getting it I noticed he has a purple cast/tint on any gray tones and is especially noticeable if a B & W image is seen because it has tones of purple, white and black with grey wire no real!

    Its very visible on the default settings (which are mostly dressed and contrasting even after I turned the backlight down) and I adjusted the brightness, contrast and gamma via graphics driver as by test cards, but despite that I get this darn will not disappear.

    Is the only way to sort of get rid of him for the contrast of the Green layer but affecting the other colors as well so it's not really solve the problem and the cast usually ends either be clear or green purple with no real neutral gray.

    This distribution is visible in all lighting and all the corners of the screen.

    I send it back for a replacement or open a repair warranty on the laptop, is there anything anyone can suggest I do?

    It is not easy to discuss this issue. We will see what it looks like.

    In my opinion, you should contact your local dealer, compare it with other laptops of the same series and ask for replacement.

  • Satellite Pro C660 - 21(d): question about the partitions on the HARD disk

    Hello

    I just started using my new satellite pro c660 - 21 d

    My office has drive c, d, u, s
    C either windows 7, Vista D
    The drive U is 342 meg in size

    I didn't have the disk in two 230 gig drive so thoughtless narrowed C drive of 70 GB and D drive with 10 gig (it's the primary recovery partition

    I have now two empty partitions of 170 Gig (from c drive)
    and 214 Gig (from d drive)
    But windows will only allow me to add one as a disc of the user
    He says may not have more than 4

    The reason for being there is a partition of Active recovery without letter.

    I can't unshrink drive C or drive D then I went with 170 GB of unused space.

    I guess that a solution would be to lose the data disk 10 gig that contains the recovery software but then I don't have a backup.

    Suggestions as to what I could do to work around this problem.

    I am now under the Create recovery disks (2 of them) so maybe I could remove one of the partitions after.

    I don't know why he answered instead of edition, but if the recovery disc creation complete with no errors, I can remove the hard drive?

  • Satellite Pro C660-239 - restore from recovery media error

    Hello!

    I have a laptop from a client, it is a Toshiba Satellite Pro C660-239, and I'm having a strange problem.

    The original hard drive failed, and as the laptop is out of warranty, we bought a new hard drive and ordered the recovery media to this model, our assistance to repair local toshiba.

    After the installation copied the files on the disk, the imageX command fails when you restore the image with error files:

    "the file or directory is corrupted and unreadable."

    The hard drive is new, and I also tried with more than 2 hard drives, as well as with an external cd-rom drive.

    I spoke with the support of assistance local repair, and told me that this happens because the ins new ' t compatible with the recovery media hard drive?

    One of the new disks hard I tried, was the exact same model as the original hard disk, and the error persists, so the hard drive may not be the problem.

    Y does it have that no change in the recovery media is corrupt?

    Could also be a motherboard problem?

    Thank you

    > Is there any change in the recovery media is corrupt?
    Of course, this is possible.
    In case the HARD disk is OK, the recovery media may be damaged.

    > Could also be a motherboard problem?
    I don t think so. I imagine that the HARD drive is recognized correctly in the BIOS and the error message says something about corrupt directory. I guess the disk directory that is the meaning and I think that the media should be replaced.

  • Re: No Internet on the Satellite Pro C660

    Someone at - he of the drivers from the internet that can run internet on Toshiba Satellite Pro C660? Laptop is preinstalled with Win7 64 bit.

    I put t know what the card is inside the laptop. He formerly Atheros, but now his Realtek, was great work until Windows don't update now no link it just says: limited access, even if there are 5 full bars showing, there is a yellow question mark on it.

    When I run the troubleshooting it indicates a possible driver problem, but if I check the driver it says working properly. I have been using the system restore and disable windows update, but daily updates are coming back and I have no internet again.

    Now the system restore point that I had created that worked went among the dining choices.
    My head is paralyzed.
    Any help greatly appreciated

    D

    Windows updates are listed as important and optional. Under optional drivers are sometimes written drivers for hardware components such as display or WLAN. Please don t install these updates. Install important updates only, and only use the drivers from Toshiba.

    Please send us the name of the full model (C660-xxx) and we can check what cards are on the inside.
    Try it please check the system again restore and turn on show restore points more. I hope that your restore point will be there. Do it, check the functionality and don t install any driver offered by Microsoft Windows update.

Maybe you are looking for

  • "Reactivation" corrected automatically on "disable."

    I tried typing "reactivate", and it automatically corrected to 'disable '. Twice. Why? I say again, WHY? I tried to type a word which * is * a Word, in fact finally I was walking on a dictionary, he was there. Is not correct automatically supposed to

  • 12.4 scrolling problem Podcast

    I wonder if I'm missing something or if this update has a major defect.  Warning... not a major English hope, I get this through. When I go to the podcasts on my ipod, I can't scroll castings subscribed. I can use the arrow keys to go down no visible

  • How to reset Apple ID security issues

    I wanted to buy music on my new iPod, but apparently, I need to verify my identity with security are issues that I wrote years ago and do not have a clue of what the answers. The site of Apple ID gives me an option to send an email to my email of res

  • Need help to make the adjustments to TCP between Labview 2011 and webrelay

    Hello I'm using Labview 2011 and trying to establish communication with webrelay (X-WR-4R1-l) to control its relay. I downloaded a www.ni.com example but it does not work.  (he was tied with this thread as well) I did no changes in the example progra

  • When I sign in to Hotmail, is no longer automatically fills my log in ID when she used to.

    original title: Hotmail Sign In Page My hotmail sign in page no prefills longer in my diary in code.  Also the button asking if I wanted to connect with a different ID is gone.  It started a week ago.  I can't find any setting to return to the way it