Nikon NX2 software

Similar Questions

• Nikon NX2 with Win 7 Home Premium software conflict

  I installed Nikon NX2 software on my laptop HP G71-340US, Win 7 Home Premium edition, 64-bit and the program opens, the camera sees the laptop (I can even "go down" to the DMTC map and see the photo on the camera chip but will not automatically fill the transfer software to go from camera to the laptop (I can do it manually).)

  I checked the compatibility of the program (defined on W7). uninstalled, even restore to an earlier point (cannot go back to an earlier date than the original installation).

  I know that this is a conflict with this laptop that I installed the same software on another computer and it works fine.

  Just puzzled as to look elsewhere, short total reinstall I would avoid as much as possible.

  Hoping that someone out there has an idea or a solution.

  Sincerely,

  Bruce

  I installed Nikon NX2 software on my laptop HP G71-340US, Win 7 Home Premium edition, 64-bit and the program opens, the camera sees the laptop (I can even "go down" to the DMTC map and see the photo on the camera chip but will not automatically fill the transfer software to go from camera to the laptop (I can do it manually).)

  I checked the compatibility of the program (defined on W7). uninstalled, even restore to an earlier point (cannot go back to an earlier date than the original installation).

  I know that this is a conflict with this laptop that I installed the same software on another computer and it works fine.

  Just puzzled as to look elsewhere, short total reinstall I would avoid as much as possible.

  Hoping that someone out there has an idea or a solution.

  Sincerely,

  Bruce

  I changed the setting of compatibility for XP SP3 and it works now.

• Nikon d750 cru - not able to import into LR

  My files d750 raw does not matter in LR (having the most recent CC LR). Get this error.

  

  Also tried to use the DNG Converter. Did not work

  Also checked if the NEF codec is updated

  Also tried to convert files in Nikons NX2, where files are reduced to 24 MB about 1 MB in tif.

  Some versions of Nikon software is known to corrupt Raw files, so they can be read by Adobe software.

  Try to import the camera to the computer using a card or drive directly via a cable from camera to the computer.

  You can also try to use this utility

  Difficulty of the corrupted Nikon NEF Images

• My Windows Media Center XP computer does not recognize my Nikon Super Cool Scan 5000 ED

  I have a Nikon Super Coolscan 5000 ED, which I have not used for several years.  I tried to install it using the Nikon Scan software and was a failure.  Site of Nikon said that by Hamrick VueScan will also run this scanner.  My computer does not recognize the scanner and so I can not install the drivers for it.  I tried to connect this device on several different computers and with different cables.  None of these computers does not recognize the device.

  Hello

  As you mentioned that none of the computers recognize this device, you will need to contact the manufacturer and check.

  http://Imaging.Nikon.com/support/

  You can post your request here:
  http://support.nikonusa.com/app/answers/detail/A_ID/238

• Nikon Transfer

  I try to upload my pictures via Nikon transfer software but get message ' Nikon Transfer Application works not... windows is looking for solution. I have used this app for 2 years, but now it will not work. I uninstalled Nikon Transfer and View NX and reinstalled directly from the site Web of Nikon but still message. I work with Vista.

  Contact Nikon support.

• Nikon Coolpix L18 DSC - PTP how to view images BEFORE import

  Hello: How can I change my import settings; I want to see pictures before importing?

  I want to check mark the ones I want to download camera. Also I do not clear my photos on my camera picture; It is important not to upload hundreds of photos several times.

  Thank you

  Hello

  Download you and install the Nikon camera software and firmware (the software that is embedded in the digital camera)?

  Here are a few article that talks to connect the camera to a computer and access to pictures in it:

  How can I get pictures from my camera to my computer?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-i-get-pictures-from-my-camera-to-my-computer

   

  Erase pictures from your camera by using your computer

  http://Windows.Microsoft.com/en-us/Windows7/erase-pictures-from-your-camera-by-using-your-computer

   

  Working with digital images

  http://Windows.Microsoft.com/en-us/Windows7/working-with-digital-pictures

  You can also contact Nikon Support for assistance on the issue:

  Nikon support

  http://www.nikonusa.com/en/about-Nikon/contact-us.page

  Hope this information is useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Since the El Captain upgrade my Photoshop CS4 (11.0.2) is not printing.  Printer works very well by other software.  Can anyone help?

  I've recently updated to Apple El Captain since my Photoshop CS4 (version 11.0.2) is not printing.  I checked and the printer works fine other applications (preview, Nikon NX2 etc.). Can anyone help?

  This post is useful and I can print now.

  
  

  
  

  4 re: Photoshop printing with a new interface of Epson

  

  Printer_Rick  , August 4, 2009 07:11 (in response to JoeLunetto)

  This message by Miguel may or may not be useful:

  http://forums.Adobe.com/message/2096662#2096662

  It is my understanding that when printing in Photoshop, with "Proof", selected in color management and "Photoshop manages color" under color management, Photoshop performs color conversions on output 2.

  The first is the "Proof" profile (which purposes commercial impression, describes the State of the press), based on the color settings. Then it is in turn converted to RGB ink jet printer profile.

  With this final conversion, it changes depending on the format of test (paper, ink, black) options in the dialog box print in Photoshop. If none is selected, Relative, active PCBS Colorimetry. If the black ink is checked, Colorimetry Relative, disabled PCBS. If the color of the paper is checked, absolute Colorimetry.

  Maybe these correlations are known, but they were certainly new to me. What this means is, if you have a lot of trouble with printing interface, you could do the necessary conversions manually and send RGB not calibrated to the printer. Not an efficient workflow but will work if you are in a bind.

  • Printing from Photoshop with the new interface of Epson

• I need help, Nikon D750 raw files open in Photoshop CC 2015

  Adobe Photoshop CC 2015 with Camera Raw plugin 9.1.x installed but still can't open NAVE D750 files.

  Have you used the Nikon transfer software or view these files? On some devices it has corrupt files so PS can not open them.

• CAB and Nikon Raw D800e files

  This discussion is actually a follow-up on an older version, one where I thought that the problem has been resolved. I'm using CS5 extended 64-bit WIN 7 64 bit with ACR version 6.7. I checked the version of ACR updates and was informed that I am up to date. According to the ADOBE ACR v 6.7 site help is available to open Nikon D800e raw files. However when I try and open these raw files there is a message that the camera model is not supported. Any help on why raw files cannot be opened with cab 6.7 is appreciated.

  Thanks Noel - after several hours of experimentation, I found the problem. I use a stand alone software, Nikon Transfer, to download images on the computer. The software allows me to preview/select, rename, and make simultaneous copies for backup. This software worked without problems, but when downloading pictures on the Nikon D800e it's something for raw files, making them incompatible with the software ADOBE ACR and even Nikon ViewNX 2. Now, here's the real curosity. When Nikon Transfer is initiated from a loner in the Nikon View2 software and not as a stand, he works, and ADOBE ACR 6.7 can read raw files. Once again thanks for the help.

• Backup Restore Time Machine after 10.11.3 downgrade to 10.10.5?

  I am installing a purchased copy of Capture NX2 photo of Nikon editing software on my MacBook Pro retina 2015.

  I learned that I can only install this software on a machine running upward for OS X 10.10.5 (Yosemite) and that after an upgrade to El Capitan software will still work.  (The software cannot be installed under El Capitan, confirmed by Nikon)

  I had a Time Machine backup of my 10.11.3 system, lowered to Yosemite with a new installation of a boot USB disk, installed the Capture NX2 without difficulty. Works very well.

  Now, I would like to restore from backup Time Machine El Capitan, but maintain the installation of the software (i.e. I don't want to replace all of the disk). Yosemite will not let me restore from backup Time Machine of El Capitan (see the files, but will not allow app or restorations of the photo library)

  Is it still possible?  What I need to solve this problem by having an El Capitan and Yosemite a partition on my hard drive?

  Thanks in advance!

  It seems that the plan was to go down, install the software, then upgrade.

  Have you tried to upgrade, and then use the Migration Wizard to migrate the data from the backup?

• Problem msvcr80.dll

  Hello

  I work as a photographer and use just imaging of Nikon editing software - Capture NX2. It has stopped working - means I can't work. I've been back anf by the Nikon support. They say now it's a MS problem - here is their last response.

  All CNX2 accidents on your machine state MSVCR80.dll as the failed module. MSVCR80.dll is a "Microsoft C runtime library, version incompatibilities and other errors in the C run-time library commonly cause failure of application on Microsoft systems.".

  This means nothing to me! Anyone has any suggestions please? I would be really grateful - I have three shoots later this week and have not the slightest idea how I'll finish them. Using 64-bit Vista.

  Hello

  Check the similar patches here:

  MSVCR80.dll not found error resolution
  http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• My pictures are spread over Lightroom

  A recent import I had some photos arrive with a skewed rotation and odd white margins on some.  Some in the Group were fine, hit or miss.  I contacted Nikon and they had me import in his View NX2 software and they came out fine.  Then I tried to import the NX2 software in Lightroom and same problem.  Example photo below... someone else had all solutions?  Thank you...

  Probably you have specified a preset import that uses vertical optical correction.

  Or you set a default value using law is applied to the input. To test this (assuming that you do not specify a preset), make a problematic picture appear to develop, hold down the SHIFT key and press the button Reset (Adobe) at the bottom right. If this brings your back to normal picture, hold down the Alt key and press the Set Default... button. and choose 'Restore Adobe Default Settings' in the dialog box that appears.

  HAL

• How can I get thumbnails appear in Bridge CS4 on Mac?

  When I download raw (NEF in Nikon) files from card memory via USB, Image Uploader in Bridge, but appear as icons, not thumbnails.  The icons are all labelled NAVE NX2.  Also, I get an error message indicating that, although the download was successful, the conversion of. NAVE .dng files failed. I am a new user of Adobe Bridge and PSE.  The downloaded files will open very well as thumbnails in the PSE, but not bridge.

  I'm running on a MacBook Pro with MAC OS x 10.6.4.  I have software installed on my machine Nikon NX2, but does not when I run Bridge.

  Can anyone help?  Thank you.

  In Bridge, select help > updates and the bridge should take care of itself. You can only refresh bridge to ACR 5.7.

  To update the PES of the plug-in version, click here and download the latest update. (You can try 6.1, because a lot of people seem to have trouble with 6.2). Follow the instructions in the readme file, but do not remove the old version of the plugin first, no matter what say the instructions.

  http://www.Adobe.com/support/downloads/product.jsp?product=40&platform=Macintosh

• Comparison and sorting of raw (NEF) & JPG in LR

  I am interested in importing raw and jpg and then comparing them.

  I want to apply different effects on the raw files to see if I can match or better the JPGs, returned by the camera

  (I use the Nikon).

  Background:

  In the past, I used L:R to view my Nikon NEF files side by side with the camera JPG files and discovered the amazing versatility of the NEF files to solve problems in the image files and so I always preferred to work with RAW files.

  But I recently read a discussion of NikonView (or maybe it was different, software by Nikon NX2?) compared to LR in which several people agreed that Nikon is better to render his own SHIP as ADOBE files and they suggested that it was because the Nikon engineers know the exact process (algorithms?), they used to extract and calculate the chip data and thus can better engineer the right to the editing environment even if Adobe uses a "best estimate".  I have no idea if this is true, but it seemed plausible.

  Now I do not have the latest version of the Nikon software but I wanted to see if I could compare jpg 'good' of the camera to the image of the raw data in LR.

  (Without having to buy the softwareor even open a free demo)

  The first thing I did was import NEF files and JPGs as separate importations in the same catalog, by changing my import settings.

  .

  It was easy to notice the difference on my screen. (How does that translate to print, I don't know.)

  What surprised me, is that the jpgs from the camera immediately look better than the NAVE "Unproessed" files.

  (When it is properly captured.)  I do not expect to be as easy to improve however as the raw files.

  But I couldn't the Raw file to resemble the JPG?

  I tried to assign the NEF files my favorite camera profiles (used portrait put in camera)

  Even on eidting my first RAW file, I noticed that if I wanted to match the jpg files, I use other adjustments such as contrast, recovery etc.

  I intend to make quick mass-settings for RAW files to see if I could match or beat the jpg for the overall image quality

  I wanted to use synchronization to copy those affecting each file.so NAVE, I started sort NEF files and JPG files into different groups and soon discovered I don't know how to do this:

  Is there a QUICK WAY TO SORT / GROUP of TYPES of FILES IN LR?

  Can I select just the RAW file or just the JPG files?

  I know that I can sort the metadata files, but cannot figure out how to sort by extension.

  I realize that I can do to work around the problem by deleting the entire folder in the catoalgue and sorting using windows explore (XP) and then re-import them separately.

  But I think that there should be an easy way to sort directly in LR.  But I'm afraid, there is no.  Am I wrong?

  Once I sort, I would be able to mass - apply settings (such as contrast settings) to a set or another and to do some side - to - side comparisons between RAW files and jpg files and make the most of my photos.

  To select by file type, go to the metadata Panel in the library filter (if it is not displayed check

  ( Display filter bar on the view menu). Click on one of the panels of meta data, and then select the file type. Select the type of file you want.

• Computer hangs during the transfer of 16 jpeg files.

  Recently, I replaced my Toshiba Satellite M40 PATA hard drive and reinstalled Windows XP SP3.  Subsequently, I find transfer more than 16 jpeg files (approx. 1 MB each) at the same time causes the computer freezes.  I have to shut down the computer and restart and sometimes the computer is 'always' Hung/frozen after restarting Windows (mouse move no keys, ctrl + alt + delete work does produce no action) which necessitated my stop down and restart the computer again.

  This problem occurs during various methods of transfer-to transfer pictures from my card SD using the scanner and camera or Nikon transfer software, trying to copy and paste pictures from the SD in an empty folder, and the problem occurs even when I try to spend more than 16 images from a folder in another.  I tried to transfer images from a folder with the computer in safe mode and the problem occurs when I try to transfer a little more than 16 images at once.  (my SD card, has about 60 images on that.)  There is no error message or any other message - the computer simply crashes.

  I did not have this problem before reinstalling XP.  There seems to be no limit to the size of the transfer that I could perform. I can't wait to find out how I can remedy this problem.  I am familiar with writing code, check the registry, etc, but I'm good enough following the simple procedures.  Thank you for your help.

  Original title: file transfer causes XP to hang, no error message

  Hi RobertMorouney,

  Thanks for posting in the Microsoft Community.

  In addition, how are you doing today?

  You have a problem with the computer hung on the transfer of files on Windows XP. This can be very frustrating for you, and I appreciate the efforts you have put in. Let us work together as a team and try to get this fixed number.

  Method 1-

  Step 1-

  Trying to transfer files in Mode without failure.

  Check out the link-

  To start the computer in safe mode

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Note: Make sure that you get the computer back to Normal Mode after performing all the troubleshooting steps.

  Proceed to step 2, if the problem does not occur in Mode without failure.

  Step 2-

  I recommend you perform the clean boot.

  Placing the computer in a boot minimum state helps determine if third-party applications or startup items are causing the problem. You must perform the steps in the article-

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: Make sure that get you the computer to a Normal startup after performing all the troubleshooting steps.

  Method 2-

  I wish that you run a Chkdsk command on the computer.

  Check out the link-

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265#Method1

  Note: The Chkdsk command will try to fix bad sectors on the hard drive. All the data on these sectors may be lost. The computer could go to a State no boot as well. Proceed at your own risk.

  We know if you need help. We will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.