No advance WARNING when a limited time the user is disconnected

Similar Questions

• When I click on the user profile, it loads, but it will automatically sign.

  Original title: windows 8 signature problem

  Salvation;

  I use windows 8 long

  but now all of a sudden I faced this problem

  My problem is:

  When I start the pc I can't connect

  Not that: I never set a password or another profile

  I used it with password

  now, he will ask you to click on the user profile to load

  but it will automatically sign

  Not so: I can't use safe mode

  and I can not shut down the PC or use anything

  in this my problem in the video link

  http://youtu.be/b_BAKBxXHng

  looking for your help

  Hi Mohd.alaradi,

  Sorry for the late reply.

  Do you have any other user administrator account?

  Method 1:

  If you have another user account administrator, you can try to connect to this user account and check if you face any issues. If you are able to connect, uninstall the AVG Antivirus software and check if you can connect to the user account with the questions.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable or uninstall your antivirus software. If you need to temporarily disable or uninstall it to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled or uninstalled, your computer is vulnerable to attacks.

  Method 2:

  If there is no other administrator user accounts, you can enable the WinRE built-in Administrator account. Then uninstall the AVG Antivirus software and check if you can connect to the user account with the questions.

  Step 1: To enable the built-in Administrator account follow these steps:

  1. Insert the Windows 8 install disc.
  2. Click on repair your system.
  3. Click Advanced Startup Options.
  4. Click command prompt.
  5. Type: net user administrator /active: Yes

  Note: Please follow the same steps and type net user administrator /active: no to disable the administrator account after the diagnosis is made.

  Step 2:

  Now uninstall the AVG Antivirus software and check if you can connect to the user account with the questions.

  Hope this information helps. Response to the publication with updating the status of
  the question to help you further.

• simple question for the first time the user: someone please be a hero

  Forgive the restorative nature of this question but the FM help files are surprisingly usless for the first time and users.

  I did successfully a rectangle graphic.  Now, I want to put some text in the rectangle.  I see that I can't just click on and type.  Apparently I have to, I don't know, do a "framework" of text or something?  I don't see why this is so complicated or why the help docs do not begin at the obvious base.

  Please throw me a bone and wander if this.  I use 9 FM, but I am sure that the version is not serious.

  Thank you!

  There are two possibilities to place text on a chart.

  One is to use the "text tool" in which you can type a string of text whenever you click on the slider.  You can format the string, but you cannot apply a character tag or a paragraph tag. And you can't put a carriage return make several lines; to do this, you need to add the additional lines of text.

  The line of text tool is the letter 'A' that appears in the icons when you consider > toolbars > toolbar graphics.

  Second method is to create a text frame, and then type in it. You can apply paragraph tags, tags of characters, use of CRs and so on in a text frame.

  Text frame tool is the small square with several lines in, just above the "A" icon in the Graphics toolbar.

• How to give limits to the user account on the same pc admin (user account)

  Hello..

  I want to give control to the user.

  the cant of the user in order to access some features..,.

  as some readers, my documents.

  Office properties, delete some programs...

  Help me

  Hello

  Thanks for updating the status of the case, it would be better to post the same question in the Technet community for more help.

  TechNet - Windows Server - group policy

• How to make a web page which changes each time the user refreshes? Is it possible to Muse?

  Hi, I would like to make a simple site where the main text in the center of the page changes whenever the user refreshes the page in their browser. I guess I'll have to do a master and several pages that are all the same except for changes in the text, but I don't know how to make sure each update goes to another page and not just the home page? Is it still possible in the Muse?

  This is an example of what I'm going: : procatinator:

  Thank you!

  You can't do it with only Muse. Would be probably pretty simple to do with a bit of Javascript. Check the widget directory such that it is possible that someone has made a widget for random content. If not, maybe I'll do one this weekend. ;-)

• Limitations of the user on v11g XE?

  Y at - it no limitaion in the number of users that can access the database at the same time?
  Or is the 11g XE a standalone version?
  
  Kind regards.
  -Wilfried

  The main limitation with XE is the maximum amount of user data, several optional Oracle components available in other editions are not included with XE, see the documentation for license for more details.

  The instance can manage as many simultaneous sessions that the host can take in charge the OS (and the design of the scheme). Physical memory and processes or other limits of resources on the host will usually come into play, first of all, and the memory total XE for instance 1GiB limit can also be a factor limiting total user sessions.

• Several installation issues for the first time the user of 10gRelease2

  Despite the doc who said certification 10g Release 2 Windows XP Professional (> 1 MS), clusterware install fails with YES-1-8001 (error - must XP ver 5.0 or 5.2). My XP Prof Ver 5.1.2600 apparently is not compatible. Error Msg suggests the Service Pack upgrade.
  
  Tried to install Personal Edition, but has never seen the oppty to selection after downloading (clinet, gateways, clusterware) individual zip files into separate and then folders by running setup.exe from each folder. Don't know if I am running Personal Edition.
  
  It is my first time attempt to install Oracle dB. Seems that my client and gateway installation went well, but I do not have something straight to start SQLPLUS or my question clusterware is causing a problem.
  
  When you start SQLPLUS, entered by user name (e-mail), passwd, don't know what to enter for the chain. Leaving blank, a timeout exceeded. Do I need a login? SQLPLUS crashes if I try, and then click file.

  You have installed the companion stuff. Get rid of it.

  Install only the CD database.

• Triggers when an arrows of the user down the block to insert a new record

  I'm looking for a trigger that fires when the arrows user beyond the last record in a block to insert a new record. Is there a trigger that fires at this point?

  WHEN CREATE RECORD fires in this situation.
  but it also fires if the block is empty and gets the focus.

• I do remember not my username and password but no reminder sent when I ask for the user name reminder email

  I try and connect but can't remember my user name or password.
  I request an email user name, but nothing is coming through. I left for an hour, but no email received. I also check the spam box.

  Sorry, it took a while, but I got a response to my yahoo email account and have now successfully connected.
  Thank you for your answer, but it is resolved.

• Satellite M45: Windows XP does not start when you click on the user name

  I have a portable Satellite M45 in XP service pack 2.
  After starting the PC, he gets that windows journal under the screen, I click on connect my name and nothing happens.

  I have completely reinstalled the operating system, updated all drivers etc, and it was fine for one night.

  The next day, I'm back to square 1 and cannot log in again.
  It starts in safe mode, but I don't know how to start to solve the problem.

  Can someone advise please?
  Thank you

  It's very strange!
  Have you removed any spyware or Trojans?

  Question you is really, really strange, and I guess that the 'bad' software causes such problems...
  It seems that something changes that replaces Userinit.exe.

  A similar question has been described here in the MS knowledge base:
  http://support.Microsoft.com/kb/892893

  It seems that some registry have changed and that's why the connection does not work correctly!

• How to warn the user that the application is about to disconnect automatically?

  If a user leaves his workstation unattended for a certain period of time, the Apex application disconnects automatically from the server.  The user is not warned about this and if they attempt to save some data on the current page, they don't realize that their data was not recorded until they click on the "Save" button.  At this point, the values of page element empty out and they realize that their data has not been saved.  It is the current page allows many lines to affix and the user can waste a lot of time entering data which will fall into the compartment bits.

  Is it possible to make my Apex application notify the user that the application has been automatically disconnected?

  Better yet, the user can be notified that the app is about to disconnect and the opportunity to extend their session?

  Thank you!

  Kim

  What APEX version do you use?

  The following link, Although unsupported by Oracle, contains a plug-in (I used) for the expiration times of session allowing notifications customized (about to cut etc..).

  http://www.apex-plugin.com/Oracle-Apex-plugins/dynamic-action-plugin/skillbuilders-session-timeout_188.html

  Keep in mind, it's good for APEX 4.0...

• Recomposition of desktop clears the user setting when you use persistent disks

  I'm in test phase of VMWare View, and I created my server administrator display and a server of composer. I was able to create jobs with the composer. Assignment of a user on the desktop and user can connect through the Client view. When the user logs on, they get a C: (Local disk) drive, drive D: (PersistentDataDisk) and a drive E: (SystemDisposableDisk). The user can create shortcuts and install their profiles of Lotus Notes and everything works great. The user can disconnect and reconnect and stay all settings. If I recompose the office by changing the initial snapshot used to create the office and place it on the office compound it clears all the settings of the user.

  I want to know if this is normal behavior or if the settings of users should be "replication" to the PersistentDataDisk and reloaded when the user connects again. I want to be able to have users customize their desk tops and others for their taste but have the ability to add modifications to the software via the Redial feature.

  Thanks in advance for your help.

  Josh

  A persistent record of the composer view should not be affected by a restructuring or a refresh operation.    Have you checked that the profile is being created on the disk D:\ sucesfully?    I remember problems in the past, if the user was connected to the image of the mother and then the profile remained on the C:\ drive instead of passing to D:\.

• Limitation of the recipient

  Hello
  I use 11g with GNU / linux.
  When I schedule a report, I chose 20 recipients of users. (20 critics have the e-mail account).
  And I added manually the Mail 4 id
  
  the recipient of the message so total = 24
  
  Could you please let me know what is the limitation of the user recipient selection and manual mail ID users.
  
  Thank you
  Gram

  Hello

  It is about 5,000 users by default. (it is based on the Configuration of the LDAP server, you can also increase the size limit of the AD or set up several groups)

  Thank you
  Deva

• When I log in with the user account that reflects on the one hand by car, there is no batch file or a script in AD for this user profile

  Hello

  I created a new user in AD (Server 2003).

  When I connect with the user account that reflects on the one hand by car, it not there no batch file or a script in advertising for this user profile. I don't want user to access this part by car.

  If anyone can help.

  Kind regards

  Virendra Tainya

  Hello Virenda,

  Thanks for posting your query on the Microsoft Community.

  I would like to inform you that we have a support forum dedicated to systems on area issues, I suggest you to send your query on Microsoft TechNet forum for this issue. You can get more effective suggestions and adapted by experts familiar with this topic.

  Please visit the link below to find a community that will support what ask you:

   

  Microsoft TechNet

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winservergen

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• NULL point Exception when obtaining the user name

  Hello
  
  I'm getting NULL pointer exception when trying to get the user name when the page load.
  
  My code is as follows:
  
  I had imported the oracle.apps.fnd.framework.webui.beans.message.OAMessageStyledTextBean package
  
  In the controller under the proceesrequest, I wrote the following code
  
  String uname = pageContext.getUsername ();
  OAMessageStyledTextBean UN = (OAMessageStyledTextBean) webbean.findChildRecursive ("name");
  one. SetValue (pagecontext, uname);
  
  After doing that when I run the page I'm getting NULL pointer exception.
  
  Can someone correct me where I had gone wrong.
  
  Thank you.

  The error is on line 39 of your controller. First thing you should do to avoid this must include an audit non-zero.
  String uname = pageContext.getUsername ();
  OAMessageStyledTextBean UN = (OAMessageStyledTextBean) webbean.findChildRecursive ("name");
  if(un!=null)
  {
  one. SetValue (pagecontext, uname);
  }