No assistance on a professional monitor
Hi all
I use AJA Cona 3 G, looking for a professional monitor under $4000, so I got those:
1 - JVC 21 "truth series DT-V21G11Z LCD monitor
2 - JVC 17 "DT-V17G15 multiformat HD LCD Monitor
http://www.bhphotovideo.com/c/product/907175-reg/jvc_dt_v17g15z_17_verite_g_series_hd_lcd. HTML
3 - Panasonic LCD 21.5 "Studio monitor
http://www.bhphotovideo.com/c/product/891005-reg/Panasonic_bt_lh2170pj_21_5_LCD_Studio_Mon itor.html
4 - Sony PVM-1741 photo OLED monitor (17 '')
http://www.bhphotovideo.com/c/product/766409-reg/Sony_PVM_1741_PVM_1741_OLED_Picture_Monit or.html
I appreciate any suggestions,
Thank you
Sheriff
OK, thanks to all, I'll go to the ISP, they have convinced me after contacting them and below is the results:
ME:
Hi, I'm looking for a good monitor
for C.G. (10-bit, playback 1080 50i & 25 1080 p).
If you would inform my why should screaming your LM - 2461W 24 '' not others like:
-Panasonic BT-LH2550
http://www.Panasonic.com/business/ProVideo/BT-LH2550.asp
-JVC DT-V24G11Z
http://Pro.JVC.com/Prof/attributes/features.jsp?model_id=MDL102068
-Wöhler RMQ-230-3 G
http://www.Wohler.com/details.aspx?ItemNumber=RMQ-230-3G
http://www.TVTechnology.com/article/Wohler-RMQ--g-video-monitor/216882
-17 "TV logic XVM-175W (true 10-bit)
http://www.abelcine.com/store/TV-logic-xVM-175W-17-inch-multi-format-L
CD-HD-SD-monitor.
ISP:
In general our instructors will offer the best combination of performance, features and price compared any competitor. However, in direct comparison with the units you list there are some very clear benefits for the LM-2461W.
1 BTLH-2550. This device is not 10 bit.its year10 bit treatment (just the fact that they can accept a 10-bit signal), but the Panel is 8 bits with a color depth of 16.7 million colors, not 10 bits in 1.073 billion colors. It is also fairly old Panel technology that has other drawbacks as shifts more colors off-axis than most modern monitors.
2 DT-V24G11Z. Like the Panasonic is not a 10-bit screen. Yet once, 10bits treatment does not mean that there is a 10-bit Panel.
3 Wöhler. Once again, an 8-bit, 10-bit monitor not just like the previous two.
4 XVM-175W. It is a good 10-bit monitor, but it's very expensive for a 17 "monitor. If you want a unit 10 bit 17 ' then our CM-170W might be a good review. However, the XVM-175W and LM-2461W are the same price in order to get a unit of 24 "for the same price as a unit 17". For use in a studio 17 "is going to be very small, so the 24" clearly has the advantage here. The XVM-245W is more similar to our LM-2461W (same size, performance, etc.), but it will cost more than twice as much as our monitor (vs $ $12,000 5 000)
ME:
OK, what about the IKEGAMI:
ISP:
We have won several shootings against this exact unit. Most customers agree that the LM-2461W has better display performance and there certainly many more features including things like 12 extended mode, measure of level of pixel and much more. Also, don't forget that the Ikegami does NOT come with the 3 Gbps SDI standard. It only comes with the HD - SDI. If you want to support the formats more advanced as 4:4:4 signals, 1080 p 50/60, etc, which is not possible on the Ikegami unless you buy 3G optional entry (costs about $1,200), which will make the unit around the same price as the LM-2461W.
I also know that visitors have never really received an answer as to if the device has a panel of 8 or 10 bits. If you look at their own record, it seems, the Panel is actually of 8-bit, 10-bit (http://www.ikegami.com/br/products/hdtv/pdf/hlm2450w.pdf). Unity also clearly lack of advanced support all formats such as LM-2461W (e.g., it does not support XYZ, 12 bit, DCI P3, etc..)
For basically the same price so equipped in the same way the LM-2461W offers the best performance, more features and a wide range of signal support. You can also get quick answers to technical applications.
The end
http://www.careydissmore.com/?p=207
Thank you all,
Sheriff.
Tags: Premiere
Similar Questions
-
I need assistance with acrobat professional
I have an older version of acrobat professional that I bought in 2008. It of on my account, but not on my orders, so I can't re - download. How to do this.
Hi barblayton,
Could if it you please let me know which exact version of Acrobat you are using.
You can find the download links for older versions of Acrobat in the link mentioned below:
Hope that helps.
Kind regards
Ana Maria
-
XPP windows does support multiple monitors (above 3 monitors)?
XPP windows does support multiple monitors (above 3 monitors)?
XPP windows does support multiple monitors (above 3 monitors)?
Windows XP should be able to use up to 10 monitors. However, you may need to use your video device software to manage them as you wish.
How to configure and use multiple monitors in Windows XP
"Windows XP makes it possible for you to increase your productivity by using multiple monitors to increase the size of your desktop. With the use of up to ten individual monitors connected to a single computer, you can create an office that is large enough to hold many programs or windows. »
You can also obtain this information from the built-in in Windows XP Help system. (Press F1, which should bring up & assistance. Type "Multiple monitors" in the search field. You should find some information).
-
Need recommendation for 70 "- 80" monitors for C-series
I'm about to install a C90 system with large screens. I would go with LCD 80 "rather than professional monitors. My main reason is that current monitors 80 "on the market are really deep/bulky and are much more expensive (like Sharp PN-E802 or NEC V801). I would prefer something slimmer for example one of the newest models Sharp LC-80.
I was wondering if anyone has had success with any series 70 "or 80 '' televisions on a C-series, where everything worked well, particularly the CEC function (wake / sleep of the CODEC) with necessary is for me.
(The installation program will be a C90, 7 '' touch Cisco, 2 large displays, microphones, ceiling speakers ceiling)
Thank you!
Eric
We used two Sharp Aquos 70 "in most of our meeting rooms for the past 12 months or so, CEC support over HDMI only. http://www.sharp.NET.au/product-catalogue/products/LC70LE735X/
We have about 20 of them deployed around the square and have had no problems so far.
/Jens
Please note the answers and score the questions as "answered" as appropriate.
-
Launch the Application IT Assistant with pass through authentication
We have started to purchase DELL servers after many years using HP. As such, we now need ot use DELL IT Assistant for our hardware monitoring.
I am use IT assistant to go to the tool Server to my windows but server during the launch of the Web page I have to re-enter my credentials.
Is it possible to have pass through authentication, whereas when I leave IT Assistant application launch so I don't have to enter a user name and password for the server administrator?
Thank you
Otte
-
How can I stop up/down warning in IT Assistant?
We already have a tracking tool that allows us to know when the servers are down... I use it Assistant purely for fault monitoring and damage to equipment, and I prefer not to get alerts down twice.
How can I turn this off?
I currently have a Filter Action Alert that sends alerts warning and critical. The next section deals with the categories of alert... Currently, I have selected as "All". Which reports on high-low category? That you should deselect?
Thanks for any help
-
Portege Z830 - issues after updating Windows for Win 7
My laptop is PORTEGE Z830. I upgraded the system to Windows 7 Enterprise. I got this yellow (!) when I opened ad peripheral printers. When I tried to know what unit he showed:
Pilot missing: ACPI\TOS6028\2 & daba3ff & 4
Also, I am not able to adjust the brightness and sound volume using 'fun' key more.
More I don't know how to get to Bluetooth more?
can someone help me?
I put t know not what drivers you have installed and then lacking here are detailed installation order then please make sure that you have installed the things listed in order:
Windows 7
ConfigFree
TOSHIBA Assist
TOSHIBA security assist
Infineon TPM professional package
Chipset SW installation utility
Intel Management Engine Interface
Intel AMT software
Intel driver
Intel Rapid Storage Technology driver
Realtek Audio Driver
Synaptics Touch Pad Driver
LAN driver
Wireless LAN driver
Atheros Bluetooth driver filter package
Bluetooth Stack for Windows by Toshiba
USB3.0 Driver
Ricoh card reader
Technology of quick start Software Intel
TOSHIBA fingerprint utility
TOSHIBA Value Added Package
TOSHIBA Service Station
TOSHIBA eco Utility
TOSHIBA PC Health Monitor
TOSHIBA Disc Creator
TOSHIBA Web Camera Application
TOSHIBA face recognition
Sleep TOSHIBA utility
TOSHIBA resolution + plug-in for Windows Media Player
TOSHIBA Media Controller
TOSHIBA Media Controller plugin
Assistant TOSHIBA Bulletin Board
TOSHIBA Network Device ID registry tool
TOSHIBA wireless LAN indicator
TOSHIBA HDD/SSD Alert 90
PatchFiles PCIIDEREG - 1.2
PatchFiles FixFPService_REG_1.0
PatchFiles TosVolRegulator_1.1
PatchFiles TBMINITREG-1. 0 tPlease check and post comments.
-
Libretto U100 - modules uncounted after disk upgrade
Hello
Please help me find the solution or dedicated instead of U100 service.
It is a case:
I bought the Libretto U100 of some guy (his property), booklet assembled with 30 GB and 512 RAM... I changed the RAM to 1 GB and ask my it guy (friend) to change disk... everything went well...After the change, I installed a version of winmx... with all the taken drivers support Toshiba (u100 drivers)... one of them has been updated BIOS level...
After all, I found that my manager material showing an error... mass storage (yellow marks not informing - no drivers), module Ethernet (not even driver) and fire wire (133smth) who cannot not start this service to inform...
At the same time, I found that Ethernet is probably Wi - Fi which are not recognized by Windows XP (switch works and led goes on or off depending on my action)...What to do with it? Is there any «wise» service in my part of Europe (Poland)?
Thx for the help
AndrewHello
According to specification for laptop, your laptop is supported for Windows XP Home edition and to avoid problems with installation of drivers, tools and utilities. To have the operating system successfully installed, you must install all the stuff in order of specific facilities.
It is very important that you install Windows XP SP2 home edition.
After the installation of Windows XP Home edition continue to install the drivers, tools and utilities following this order of installations:
Windows XP Pro Edition SP2
Chipsets Intel (r) software installation utility
TOSHIBA common Modules l
Intel (r) 82852/82855 GM/GME Graphics Controller
SoundMAX Integrated Digital Audio
TOSHIBA software modem
Intel(r) PRO/100 VE Network Connection
Bluetooth Stack for Windows by Toshiba
Bluetooth monitor
Wireless LAN driver
SD Secure Module
TOSHIBA controls
TOSHIBA HDD Protection
TOSHIBA SD memory card format
TOSHIBA SD Memory Boot Utility
TOSHIBA Hotkey Utility for display devices
Wireless keyboard shortcut
TOSHIBA screen utility unit of change
TOSHIBA zooming Utility
TOSHIBA Power Saver
TOSHIBA utilities
Password TOSHIBA utility
TOSHIBA ConfigFree
ConfigFree demo screensaver
TOSHIBA management console
TOSHIBA fingerprint utility
TOSHIBA PC Diagnostic Tool
TOSHIBA Assist
TOSHIBA Virtual Sound
CD/DVD Drive Acoustic SilencerIf I'm missing something you can install it at the end.
If you need assistance contact service professional. The addresses and telephone numbers, you will find under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.
Good luck!
-
The Compaq nx7400 Notebook PC driver installation
I will soon be reinstall Windows XP Professional on my laptop Compaq nx7400. I already downloaded the drivers from HP support, but I need to know in what order they must be installed. I'm especially afraid the buttons outside the laptop will no longer work after the installation.
@evans5179
Hello
You should always install chipset driver as first reboot. It is the most important rule.
I usually install a second Intel Matrix Storage Managerdriver on models with your chipset.
After that, you can install graphic driver to continue the installation process in more comfortable conditions.
The next thing you need to know is that before you are going to install the audio driver, you must install the first "Microsoft Universal Audio Architecture (UAA) Bus Driver for High Definition Audio".
You do not have to worry about buttons nee. Install HP Quick Launch Buttons, correct the driver wireless, Bluetooth (if you have one) driver and HP wireless Assistant. When you do this all buttons should work without any problems.
Note:
HP Wireless Assistant will help you monitor the status of wireless devices.
-
Tecra S3: Laptop stops due to overheating
Whenenver I run processes of CPU on my laptop, computer base and the table heat sanctioned and the laptop stops without warning after a while.
What can I do?
Hi Kersten
May I ask how long do you use this laptop? This issue was in the past?
Mainly of overheating problems occur and are present because don t cooling modules work correctly the dust and debris inside the laptop keeps fans of rotation full implementation, this increases the temperature at the critical level and the laptop stops automatically to prevent the equipment from damage.So in these cases, it s advisable to check the cooling modules and clean it. Vacuuming may help, but be careful that such procedure could damage the fans!
Then maybe you'll ask a technician or a service partner Toshiba for assistance and a professional cleaningGood luck
-
I'm assuming that this thread does not yet receive all responses based on the time that I tried to get assistance from any professional within the community of Lenovo. I'll give it a shot anyway.
Hello, I got my Lenovo y40-70 for a little over a year (so that my warranty is expired - ways don't tell me use my guarantee to solve my problem). After the Windows 10 update, I had the terrible battery life. He would go from 100% to a State of hibernation in time. Previously, I got the battery performance acceptable with maybe about 3-4 hours of use. I tried to update all my drivers and play with the parameters of battery etc. I uninstalled the application of energy Manager and am not prepared to perform a gauge reset due to potential negative effects it could have on the my system. Anyone has an idea on how to solve this problem in addition to roll back to Windows 8.1?
Oh yes, I also tried calling Lenovo support but I was literally on the line for 2 hours while listening to a song. Any help is appreciated. You may end up having a different phone if this problem persists.
In response to customer relationships of unexpected behavior portable Y40 - 70 and Y40-80 meter battery, Lenovo has determined that the battery meter software is working as expected. The unusual calibre results being reported are the reflection of the battery reaches the end of life.
Lenovo has launched a CUTTING-EDGE Service to help customers get the battery replacement under warranty, or if more warranty, find a spare from suppliers approved by Lenovo battery. The Service TIP can be found here: https://support.lenovo.com/us/en/solutions/sf16-I0023
The numbers for Y40-70/80 batteries are:
Y40 SP / A L13M4P01 7.4V48Wh 4cell IBE (Y40-70/Y40-80) 121500248
Y40 LG L13L4P01 7.4V48Wh IBE 4cell (Y40-70/Y40-80) 121500249 replace the 121500251 part
Y40 CP/C L13C4P01 7.4V48Wh IBE 4cell (Y40-70/Y40-80) 121500259 replaced by 121500251 of the part
To determine what battery supplied with your computer laptop Y40, instructions to remove the lower cover can be found in the manual of Maintenance of equipment pdf here. An alternative to opening your system (which do not cancel warranty) is to find batteries using the product/model number located on the bottom cover.
Thank you
-
Mapped network drive disappears
I had a problem with a user on my network, when they log off and shut down their system, they are losing one of the 9 mapped drives. It's always the I: drive. The rest of the readers are mapped and simply the I: drive remapping works. The strange thing is that sometimes the player is connecting and sometimes not. Reconnecting to the connection is enabled, when you run the Net Use command, it says "new connections be remembered."
I made sure there are no devices connected via USB, like phones or external drives. I read in several forum posts on problems similar here and other sites, but none of these solutions have solved my problem. I made the registry changes, changed the drive etc. letter. Considering that there is a problem with one user, I guess the question must reside on his PC. For any help or suggestion would be greatly appreciated, thank you!
Hello
Please keep us updated on the status of the issue.
I appreciate your time.
Please refer to the suggestions of ANDREWSUPA responded on 16 July 2014 and check.
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/mapped-network-drive-disappears-after-restart/4952ee1e-4691-4557-A672-58632d9c2a2cIf this does not help, I suggest you to ask your question on the TechNet forums for assistance from her professional.
TechNet Forum
https://social.technet.Microsoft.com/forums/en-us/home?category=w7itproThank you
-
MKS14, P2714T, compatibility?
Hello! I have a question, I can connect the monitor P2714T DELL with DELL MKS14 Docking Station? Thanks in advance!
The MSK14 supports the mounting of quick release of Dell on Dell U (ultrasharp) and P. (Professional) monitors An additional VESA plate adapter is required for the Dell E (entry) and S (standard) monitors that we do not provide.
Here's the Guide:
FTP://FTP.Dell.com/manuals/all-products/esuprt_electronics/esuprt_monitor_accessories/Dell-mks14_User ' s%20Guide_en-us.pdf -
Server ezvpn 887 router for remote access
Hello.
I'm having a problem with the implementation of remote access using easyvpn server on a router 887. I followed the tutorials and also used Assistant cisco configuration professional easyvpn server to the configuration but still having a problem.
I see, but Phase 1 finished, Phase 2 will fail with the following error...
09:43:26.515 Oct 10: ISAKMP: (2003): check IPSec proposal 8
09:43:26.515 Oct 10: ISAKMP: turn 1, ESP_AES
09:43:26.515 Oct 10: ISAKMP: attributes of transformation:
09:43:26.515 Oct 10: ISAKMP: authenticator is HMAC-SHA
09:43:26.515 Oct 10: ISAKMP: key length is 128
09:43:26.515 Oct 10: ISAKMP: program is 1 (Tunnel)
09:43:26.515 Oct 10: ISAKMP: type of life in seconds
09:43:26.515 Oct 10: ISAKMP: service life of SA (IPV) 0x0 0 x 20 0xC4 0x9B
09:43:26.515 Oct 10: ISAKMP: (2003): atts are acceptable.
09:43:26.515 Oct 10: IPSEC (validate_proposal_request): part #1 the proposal
09:43:26.515 Oct 10: IPSEC (validate_proposal_request): part #1 of the proposal
(Eng. msg key.) Local INCOMING = 88.xx.xxx.174:0, distance = 80.177.185.185:0,.
local_proxy = 0.0.0.0/0.0.0.0/0/0 (type = 4),
remote_proxy = 192.168.21.12/255.255.255.255/0/0 (type = 1),
Protocol = ESP, transform = NONE (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 128, flags = 0 x 0
09:43:26.515 Oct 10: map_db_find_best found no corresponding card
09:43:26.515 Oct 10: IPSEC (ipsec_process_proposal): proxy unsupported identities
09:43:26.515 Oct 10: ISAKMP: (2003): IPSec policy invalidated proposal with error 32
'Proxy unsupported identities' research indicates a NAT problem maybe, but I don't see where this would be. In my view, the problem is elsewhere.
I use the VPN Client 5.0.07.0440 and using transparent tunneling IPSec (on TCP/10000) that the client is located behind a firewall/NAT device.
Does anyone know what may be the issue? Attached full config.
Hello Mick
Before that, one more try. .
Remote control the pfs as follows
Profile of crypto ipsec RemoteAccess
no set pfs group2
Remove and add the virtual model crypto back
type of interface virtual-Template1 tunnel
No ipsec protection RemoteAccess tunnel profile
Profile of tunnel RemoteAccess ipsec protection
I hope this will solve your problem
Henin,
-
Hello
I just got my second x 230 laptop and problems with the screen. The screen is constantly shimmering and it is much more obvious when the background is dark gray. This is the replacement that I just got and it still has the same problem. On the first trackpad was loose and had the flashing screen problem so I asked a replacement and the same issue of screen and also the battery does not fit in correctly even when I lock both sides it is always a big gap on one side and it is very vague. I m totally disappointed with the Lenovo quality control. but also tired of send them back as I believe that the following will probably be some other problems. What I tried:
1 - Updated BIOS updated
2. all the updated video drivers updated
3. increase of 16 GB ram
None of them solved the problem. It is also an IPS display.
I would appreciate an answer if someone had the same problem and managed to fix it somehow.
Thank you
ALE
Change with the increase in brightness? You may be sensitive to slow pulse modulation to control the brightness of the LED backlighting.
Regarding the flicker with certain model I see as well on my X 220. Even my professional monitor NEC 2090 UXi was the question when slowly turned on but it disappears in a few hours. The reason is fully explained here http://www.lagom.nl/lcd-test/inversion.php and there is probably no solution for this in the laptop display segment. It is unlikely that you have two boxes with the question that will be just a bad luck, but there could be a lot of poster that shows the issue more than others.
Another reason could be used to simulate colors 8 bits resolution per channel FRC . X 220 display / X 230 is very likely e - IPS, technology, which is limited to 6 bits only. The particular implementation of the FRC may also present effects of annoying flicker for some combinations of color.
Sorry, I don't have any good advice. Buying an LCD monitor is always a nightmare for me because there are too many possible questions that would bore me. On the other hand, X 230 is currently the only Lenovo laptop which has a decent view. Other models have TN craps only.
Maybe you are looking for
-
This isn't turn on or turn off the wifi. I want to block the option to disable the wifi. My child is sometimes just turn off wifi and wasted mobile data. Is there a way to limit the Tower wifi power with the restriction code?
-
I can't open links on Web sites. Any thoughts on how to fix it?
Some links may be open, but others do not. I can tab links, but not all are available. I can't scroll up and down arrows on the right w, but have enter the bar and run it up and down. I can order things online, but usually cannot get to the cart to c
-
Hello I have a laptop hp envy beats audio m6-1178ea. everything worked great until I upgraded to (forcibly) to windows 8.1. Since then, the audio has reduced in quality, power. The control panel with EQ does nothing. Small changes with the sidebar on
-
Enumerate devices VirtualBench in LabVIEW
I was wondering if it is possible to query the system for available VirtualBench devices... DAQmx VISA & I know how to do, but not for VirtualBench devices. I looked in the call library function node and noticed that there is a function called "lv_LC
-
Manager backup and recovery in Windows 8
I tried to create recovery disks in the Backup and Recovery Manager. The software would only make the first disk and then hang up. All the other empty disks inserted appear as complete. I'm trying to burn DVD + R discs. The backup application was