Similar Questions

• CAPTURE VIDEO AND AUDIO FROM THE DESKTOP

  I USE A PAVILION DV 7-6163 WINDOWS 7 OS.

  WHEN I CAPTURE VIDEO FROM MY OFFICE, I ALSO CAPTURE ANY SOUND MY MICROPHONE PICKS UP. A COUGH OR SNEEZ. HOW TO PREVENT THIS?

  Thank you

  Its simple. DON'T cough or sneeze when you capture video.

  The laptop you have has a dual digital microphone array that has form the beam, cancellation of echo and noise suppression software support.

  Also go to control panel > programs and features, uninstall the drivers Audio IDT, restart the computer and install the drivers updated from here and see if that helps.

• Graphic/video card [REPLACEMENT / UPGRADE] on the desktop HP Pavilion - help

  I have the following:

  Desktop HP Pavilion Elite m9152p

  Upgrade to Windows 7 Professional 64-bit (updated 11/2009)

  The video card seems to have gone out and tried the following:

  Operating system reinstallation

  Uninstalled & drivers Reinstalled & restoration

  Before attempts above, no changes had been made to software or hardware only led to the same result: the video seems to be fine, and then it crashes and hangs and doesn't eventually having a hard reboot how, the computer loads the integrated video/graphic card.

  I need to buy a replacement video/graphics card, but I'm not sure what card I need to be aware of, or that my computer can handle as a replacement and maybe a possible upgrade (not necessary) - any help in this regard would be most appreciated.

  Thank you!

  I think it's a good choice.

  The comments seem positive most of the time that the fan seems to be quiet.

  I don't know if your previous card had HDMI.

  When you install your new video card, it can disable your sound system because of the HDMI audio chip on the video card.

  If you do not lose your integrated audio system, after you install the video drivers, reboot the machine, go into BIOS, find the onboard audio setting. It can be set to Auto or disabled. Change the setting to "Enabled". Save the configuration when you have made the change and again when you exit the BIOS.

  Upon restart, you will have your on-board audio back.

  Impatience back on your part.

  Paul

• Desktop HP Pavilion pb-2310 - Internet form questions

  My client has a brand new Pavilion pb-2310 running Windows 8 and rarely goes online. Recently, however, he tried to make purchases online through web forms complex, for example at Air France trying to make travel arrangements. Questions that there occur regardless of site web and browser. Although printed on the box of his computer says he is entitled to phone support free of charge for the first year after purchase, I was unable to find a phone number for support anywhere - without fees or other. Not on the box, booklet supplied with the PC and not to any of the sites web support not in the warranty and technical support. So I came here to ask for help - by someone who can give me the phone number, or by a person who recognizes this problem and knows how to guide me in troubleshooting/fixing.

  Any time, he went to a web site where he needs to use a form - fill in the form fields, click buttons, etc. - things start well. It fills in the fields on the form without problem. Then it is time to click by 'next', 'continue' or 'send' button and everything grinds to stop. The screen and the form are block, it can capture is no longer in the fields, nor the commands buttons do not work. There is no separate window that is open and is perhaps hidden behind the browser window, he worked in.

  He seems to think that it is a question of java or javascript, because often, in the status bar, it will see the associtated to javascript with the button or the field command. Normally, it uses Google Chrome, but when we went to IE 9, issues appeared. These problems do not occur on his laptop, just on this new HP Pavilion Desktop PC.

  If anyone is aware of this problem, or can indicate a number of phone support or live chat, we both would be very grateful.

  Lynda

  Hi Lynda,

  Try to run version 10 Internet Explorer in compatibility mode.

  1. On-screen 'metro' Windows 8 click on desktop (lower-left).  Alternatively, use the Windows key + D.
  2. Now start Internet Exployer.
  3. Right mouse click on the bar very high and select menu. , You should now see a selection of tools will appear.
  4. Click on tools and go down to the compatibility view settings.
  5. Enter the web site that you want to run in compatibility mode.  See the image below.  Now try to access the site using IE from the desktop.

  

  If the above doesn't work then not review this publication articlefor another tip.

  HP support number is 800-474-6836 or 800-HPINVENT or online here.

• The upgrade of the video for my desktop HP Pavilion Elite HPE-210y PC

  Yes, I have two questions about my PC.

  First, on the technical card for desktop HP Pavilion Elite HPE-210y PC, it shows a power 300 watt yet looking at the minimum requirments for the video card from the factory it require a 400 Watt power supply and the fact of the data sheet does not show the power suppy manufacturer he was wondering has.

  Second, I'm looking to upgrade the video card and I was wondering what the card would be a good replacement for a game without having to replace the power supply but if I have to adapt what power? (With a ceiling of $ 200 - $350 on power supply)

  SCLAW wrote...

  First, on the technical card for desktop HP Pavilion Elite HPE-210y PC, it shows a power 300 watt yet looking at the minimum requirments for the video card from the factory it require a 400 Watt power supply and the fact of the data sheet does not show the power suppy manufacturer he was wondering has.

  Yes, the power is 300 watts. Minimum 400 watts are for full power to retail graphics cards. The map provided by HP was custom designed to meet the requirements of power weaker and is is not the same as a retail card. HP has traditionally used Bestec and Lite-on original UPE.

  SCLAW wrote...

  Second, I'm looking to upgrade the video card and I was wondering what the card would be a good replacement for a game without having to replace the power supply but if I have to adapt what power? (With a ceiling of $ 200 - $350 on power supply)

  To install a gaming grade graphics card, you will need to replace your power supply. The Corsair CX500 and CX600 are highly recommend and forum favorite. Further, these power supplies are only slightly larger than a block of power SUPPLY HP stock and are known to adapt. Power supply Idleness will put you back on the $50 - $75. For useful information on the selection of a graphics card that fits your needs, read Guide of Big_Dave of a discrete video card selection .

  Frank

• How can I get sound from my desktop to my TV Toshba pc?

  His record game

  How can I get sound from my desktop pc to my TV Toshba, that Iam currently using as my monitor...  Thank you

  You need to run a separate cable for audio.

  See the following Note of http://windows.microsoft.com/en-US/windows7/Connect-your-computer-to-a-TV

  Cables VGA, DVI and component video don't support audio signals. However, HDMI cables are supported, but not all, audio signals compatible HDMI video audio support cards. If your TV has an audio input, you might be able to connect an audio cable separate from their computer directly to the TV card. Otherwise, you need to connect the audio signal to a different device, such as external speakers or your stereo. For more information about sound cards, see sound cards: frequently asked questions.

• Unable to get any audio from webcams built in mic

  I still can't get audio of my webcams built in mic, I have Windows Vista Home Basic desktop Dell 32 bit, I went into Control Panel and click on hardware and audio and I noticed that one of my card drivers sound is missing it was a microphone icon and he disappeared. I have an old microphone that I connected to microphone before and I did a sound check and it works very well and when I try to use my new webcams built in mic a pop up and it is said (cannot create audio filter). I made no changes to the computer, all my drivers have been updated. The name of my webcam is Gear head 5.0MP HD I tried everything to get the audio from webcams to work, I also made sure the mute was off and she was not dumb.

  Now I know not which driver was missing as far as I know, it's a microphone that was present in the recording tab and he had a microphone and then icon the next day, that the driver had disappeared, I thought to go to the Device Manager, but I don't know which driver it is on and how to reinstall the driver.

  I don't really know what to do and how to solve this problem, can you please help me.

  So thank you for your time

  On the sound, the record tab, tried to right click on the device, and then click 'Show damage disabled' or ' Show disconnected devices? If your microphone has shown, you can set as default.

  To access the recording tab, right click on the speaker icon on the tray (Notification area), in the context menu that appears, click on "sound".

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-in/Windows-Vista/tips-for-fixing-common-sound-problems

• Desktop a6530f Pavilion, new hard drive and upgrade to Windows 7

  I have a desktop Pavilion a6530f with Vista.  My hard drive has been the production of errors, so I bought a new hard drive.  The original hard drive works pretty well as I should be able to create a recovery with a usb flash drive media.  I want to install the new hard drive (Seagate 1 TB SATA 3), and then install Windows 7 upgrade on the new drive.  Will be the ASUS M2N68 - LA / Narra3-GLBE motherboard supports SATA 3 (SATA 2 pilot courses)?  If Yes, where can I get the drivers?  Is there a Web page on the HP site for upgrade to Windows 7 on a new hard drive?  Or I just follow the guests after boot of the Windows 7 upgrade disc and enter the code of Vista product from the label on the side of the PC?

  Here are the specifications of your desktop HP Pavilion a6530f. Based on the specifications, this model shipped from the factory with Windows Vista Home Premium SP1 64-bit installed. This model supports the use of disks SATA 3, however transfer speeds will be limited to the rates for the motherboard SATA 2. No special drivers are required. Seagate 1 TB SATA 3 drive should work fine on this computer, but you may have problems using your HP recovery discs if the new drive is a Format "Advance" AF drive.

  It is unlikely that you will be able to create a recovery media on a USB FlashDrive with this computer. In my view, that this model only supports the creation of recovery DVDs.

  You have a choice of a couple of paths when it comes to the installation of Windows on your computer with a new hard drive installed.

  (1) use your HP Vista recovery disks to install Vista... This may or may not work depending on the new hard drive installed. Then, upgrade to Windows 7 using the upgrade disc and the Windows 7 product key printed on the certificate of authenticity provided with the Windows 7 upgrade disk. (Note: the key of Vista with Windows 7 will not work)

  (2) If you don't mind losing the "value-added" software HP originally installed on the computer, you can install Windows 7 without using Vista installed first. Install Windows 7 using the upgrade disc and the Windows 7 product key printed on the certificate of authenticity provided with the Windows 7 upgrade disk. (Do not enter the key during the installation of the window) (Note: the key of Vista with Windows 7 will not work)

  In both cases just follow the prompts as needed. I suggest to use Windows 7 SP1, because it seems to be more compatible with the new material, including readers of the AF.

  Please see HP - upgrade to Windows 7 customer care using basic upgrade or install Windows 7. Please see HP Forum - how to install Windows 7 without the disc for useful information and download for Windows 7.

  Please send Bravo

• Max Upgrade desktop HP Pavilion a6750y

  Hey, I just want to know if it is possible to max this out for games pc, and what are my limits, from the point of view of hp...

  Desktop HP Pavilion a6750y

  SN: {removed privacy}

  Processor 2.3 GHz AMD Phenom X 4 9650
  Memory 8 GB 800 MHz DDR2 SDRAM
  Graphics 256 MB 800 Mhz DDR2 SDRAM
  750 GB drives, 7200 RPM Hitachi
  DVD burner double layer optical drive
  Networking Gigabit Ethernet, 802. 11b / g wireless
  Operating system Windows Vista Home Premium SP1 64-bit

  Hi rog64ert,

  It's the holiday season, so spending is good.

  Since this is the forum of the game, you should go to the web site of the manufacturer of the game and looking for a recommendation for a video card that fits your game settings and screen resolution.

  Most modern games runs fairly well with the ATI 6850 or the NVIDIA 560 using ultra high settings according to the resolution of the screen.

  Door #winner is probably around $120-130 for the RADEON 6850 and $40 for the CX500 Corsair.

  You need to open your PC and measure the physical dimensions of your diet. Here is a list of the things to consider:

  1. technical characteristics
  2. the total power - important
  3. amperage 12 + v - important
  4 modular - is not required, but I like the flexibility
  5. guarantee
  6 i7 and SLI ready
  7. energy efficiency
  8 cost
  9. size - standard ATX PSU is 5.5 "by 5.9" by 3.4 "give or take a few tenths
  10. a single + 12 volt rail is a better choice.

  Make a measurement in parallel with the PCI-E x 16 slot to see how long of a video card will fit. The adjacent slot on the PCI-E x 16 slot must be vacant.

  ' HP ' how-to ' articles should be useful.  First, install the stable power supply and get yout PC before installing the video card.

• No sound from my desktop Windows 7

  I have no sound from my desktop computer. I have Windows 7. I ran the diagnostics and the only message I got is that my speakers are not connected. They are permanently connected, so it was not helpful. I have the latest drivers and my sound card is ok. I disconnected and reconnected my speakers and restarted the computer, but still have no sound. I have no connected devices. I don't know what to do.

  Dick

  You had your configuration changed default value of speakers...

  1. Beginning
  2. Control Panel
  3. Material and audio
  4. Change system sounds
  5. Sounds tab
  6. In the sounds drop-down box model, make sure Windows default is selected

• My audio driver on my laptop Pavilion G6 just stopped working all of a sudden. It shows "audio output device not installed."

  Original title: Audio output device

  My audio driver on my laptop Pavilion G6 just stopped working all of a sudden. It shows "audio output device not installed." Any idea on how to fix it?

  Hello

  See if that helps you.

  Do a system restore to a date before you had this problem:

  "How to make a restore of the system in Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/4692-System-Restore-how-do-Windows-8-a.html

  __________________________________________

  Or go to the website of the manufacturer of your laptop > looking for drivers and downloads Section > equip your laptop model number > find your operating system > download and install the drivers etc you will find Audio.

  HP:

  http://WWW8.HP.com/us/en/drivers.html

  Also read this information from Microsoft and follow the steps there.

  'No sound in Windows.

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See you soon.

• Remove the scratch audio from. MPG file

  I have a file MPEG2 of the videographer with a stereo scratch 192 kHz Dolby Digital AC3 audio stream saved to the camera.  I have a new track audio file of Dolby Digital AC3 5.1 48 kHz 48 kHz, mixed to a multitrack recording was recorded in genlock with video.

  I have created a project Encore CS5.1, adding video to the timeline, removed the audio track and put the new track surround audio replacement.

  I've done this several projects before, but do turn a problem with this one because of the length of the video.   The project checklist yet complains that the project is too big for a 4.7 GB DVD without transcoding, however it would fit if the MPEG2 file was not the audio of unwanted follow embedded inside.

  I really don't want to put the video through a new generation of transcoding.  Is there a way I can strip the audio from the MPEG2 without transcoding it AND replace the. Active MPG in the project again?  Or is it possible to replace the AC3 stream in the. MPG file with version 5.1 to produce an asset with which still accept as a replacement?  

  My desktop is Windows 7 x 64.   I tried using Avidemux 2.6 and still complained that the replacement was not of the same type; It's a moot point anyway because Avidemux has done a poor job of syncing the audio integrated video.

  If I understand correctly what you describe, you cannot replace the file mpg as the asset unless it's another mpeg file. You need to demux the original, put the m2v to this process as the asset and create your project. Then add the 5.1 audio to this timeline.

• Everyone has noticed after the ios put 10.0.1 update as Game Center disappeared from the desktop to your iphone?

  Everyone noticed after the OS updated 10.0.1 update game Center disappeared from the desktop to your iPhone?

  The Game Center app is pre installed and can not be deleted if use Spotlight to find it. Help here > use the search on your iPhone, iPad or iPod touch - Apple Support

• Best way to record audio from my Mac?

  I want to record audio from YouTube on my Mac - what is the best method?

  I remember I used to connect my iPad to my Mac via a cable, play on my iPad and record audio on my Mac, but I don't remember the steps I took to make (it was perhaps with Audacity).

  Your method seems to require too much work.  I like this soft- http://www.mediahuman.com/youtube-to-mp3-converter/

• HP OfficeJetPro 8600: How to scan from the desktop?

  I want to fax from the desktop.  A Word document.

  Please follow the instructions below in order to send faxes from your computer:

  Send a standard fax from the computer

  You can send a document to your computer as a fax, without printing a copy and

  Send by fax to the printer.

  NOTE:

  Faxes sent from your computer by this method using the connection to the fax printer, not your Internet connection or computer modem. Therefore, make sure that the printer is connected to an active telephone line and fax function is

  set up and working properly.

  To use this feature, you must install the printer software using the installation program provided on the CD supplied with the HP printer.

  Windows

  1. open the document on your computer that you want to fax.

  2. in your software application file menu, click print.

  3. in the name list, select the printer that has 'fax' in the name.

  4. to change settings (such as choosing to send the document by fax black or)

  a color fax), click on the button that opens the Properties dialog box. Depending on your software application, this button can be called Properties, Options, configuration printer , printer, or Preferences.

  5. Once you have changed the settings, click OK.

  6. click print or OK.

  7. Enter the fax number and other information to the recipient and then click on the additional settings for fax

  Send the Fax. The printer starts to dial the fax number and the fax document.

  Thank you