no boot after windows update__

Similar Questions

• Unable to boot after Windows 7 update

  Product: HP Compaq 6000 Pro format microtour

  OS: Windows 7 (not sure 32 or 64-bit)

  I installed about 15 Windows updates last week, some of them is critical, then restarted and the computer was fine. This morning my computer was slow, so I restarted, and now I can't start. He keeps go to boot menu options. I tried...

  -Safe Mode

  -Mode low resolution

  -Last good known Configuration Mode

  All of these options to the same start menu cycle.

  HP Startup Repair finds problems with the disc, says he corrects, finishes, but doesn't change anything. Back the same start menu.

  I tried removing battery from motherboard and BIOS restore to factory settings - or solved the problem.

  Finally, tried to restart from the disc installation, but apparently for HP there is only the option to restore the default settings (erase all data) and no possibility to repair or return to an earlier date. I really, really, want to lose data if possible.
  
  Any ideas?

  RESOLVED: Ran Startup Repair, but this time took so I could look at the newspaper.
  
  Root cause found: System on the disk volume is damaged.
  Repair action: file system repair
  Result: Completed successfully.
  
  Yes!
  
  Still, would be nice to know if it can be avoided in the future.

• Empty (black) screen boot after Windows updates

  I had this problem on two computers this week... until now. Run windows update after I restart the computer. When the computer reboots, they can start to a blank screen (black). These were not updated video card basis. Also, I tried to use the safe mode, but it crashes on MUP. SYS. I ran chkdsk... and who has not fixed it. Any ideas other then a new installation? Thanks for your help!

  Kevin_C_K,
  You said you ran chkdsk and it didn't fix it, but it will report all the problems?
  If you are still having this problem here is a couple of things to try (if you haven't already done so).
  Run the sfc/scannow utility.
  When you have run chkdsk if you do not use the /r switch, then repeat the it like Chkdsk/r

  After the clean installation, update you all hardware drivers before you start the Windows updates? Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to boot after Windows update

  Hello

  As is strives to update windows today, I wasn't expecting to lock up my computer, but now I am facing blue screen of death at every start. The Startup Repair tool is not help... So for now, the only option I see is to reformat my C drive?

  It was really unexpected, that I was a bit installing optional updates in windows (mainly the drivers I think for the fingerprint reader, graphics...) when my pc crashed. I hope to recover some of the files on my desktop before reformatting.

  So I don't expect too much help here because I can do basically anything that even the startup repair does not work. But I wonder, is there some windows updates that are to be avoided? I'd only like to know this only screwed to the top of my pc. I'm runnign the w520 on windows 7btw.

  Thank you!!

  Aurel

  Hello Peter, thanks for your response. I could back up my files on my C drive using a DOS command prompt and then restored a system image of a few months ago.

  Aurel

• Unable to boot after Windows logo

  original title: My Vista Basic Edition open habit. As soon as Microsoft logo lights, my computer gives a Windows error message.

  Before my computer crashed, he was downloading 12 'important' files from microsoft. When it restarted, it began to open with the logo of compaq, then, the windows logo, then I get a "Windows error" message.  He said that I should reinstall Windows disk.  My computer came with a preinstalled on vista. I used the recovery disc that I bought from HP to restart the computer. I made sure the start setting would be on the CD mode first (from the site of Bios). When I tried to reboot, it would have read always not the recovery disc. I got some tips on this Web site about what to do, and he said to recreate a Windows recovery disk. I did as instructed, and yet with this new disc, my computer won't get past stage logo before a loop is executed by restarting itself. I can't get into safe mode, I can enter the BIOS mode, but clicking on reset default (f9) does not solve the system. It says there's something load in my computer - I can't fix because I can't past the point of the loop. can you help me please?

  Restart your computer and press the F8 key until you reach the Advanced Startup Menu of Options. Select Safe Mode and System Restore. If the problem persists, restart the computer and press the F8 key. When you reach the menu Advanced Startup Options select turn off automatic error system reboot. Restart the computer normally and post the error here.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ITunes skipping after upgrade to clean boot of Windows 7 64 bit HP Pavilion m9500y

  I recently updated my m9500y to vista 64-bit home premium to windows 7 Professional via an upgrade to boot. Since the update iTunes ignores intermittently. Can I close iTunes and reopen it and it will play OK no problem jumping. Sometimes it takes to open and close the program several times before that it will play correctly no problem jumping.

  I won't have the same problem with Windows Media Player as I've seen in other posts on this and other forums for the problem of Itunes jump.

  I completely uninstalled iTunes such as recommended by HP before you perform the upgrade to windows 7 and I have all the HP windows 7 and the Microsoft updates, including the drivers and firmware.

  I even tried to uninstall completely the 9.2.1 64-bit version of itunes, including registry keys and installed the previous version of Vista 64 bit which worked perfectly before the upgrade. However, I still had the same problem.

  Just in case my driver realtek HD audio version 6.0.1.5910. I do music professionally and HP Smart Media and Windows Media Player simply do not cut it. I have my iTunes works properly all the time.

  This is the only problem that I have. Everything else works perfectly.

  I did the same windows 7 Professional upgrade exactly the same way on my Inspiron 1545 Dell 64 bit machine and I do not have the itunes problem to jump on this machine. I hope someone has a solution.

  I think, with all posts on this problem on this and other boards of the HP HP machines he owes to its clients to have their engineers and programmers reach a solution. I spent at least 50 hours on the problem.

  Thanks for the suggestions, however, neither worked. However, all is not lost. I finally found the solution and cause, and the problem is solved. It turns out that some third-party modules were cause of conflict with itunes. I found this link: http://support.apple.com/kb/HT2292?viewlocale=en_US to Apple support.

  I give detailed instructions on the way which we MSCONFIG to solve conflicts in Windows Vista and 7, which could be the cause of problems with iTunes. After change startup programs and services, then by adding them one at a time after restarting whenever I finally was able to hide the indentify the third specific add on that was originally my itunes jump like a needle to jump on a vinyl record when the weight of the pick-up arm is set to lowest.

  In my case, it's a tool bar add-on in my Explorer window.

  I also checked the other this fix from Apple and would suggest that anyone having a problem with itunes to jump or other problems itunes with Windows 7 to do both. One of the link above and this one: http://support.apple.com/kb/TS1362

  So, the bottom line is the problem of: Itunes to jump after Windows 7 64 bit clean upgrade HP Pavilion m9500y, boot IS NOW RESOLVED.

• USB ports do not respond after boot to Windows 7 - HP Pavilion Elite HPE

  I turned on a HP Pavilion Elite HPE this morning and none of the USB ports work under Windows 7.

  Mouse and USB keyboard work well in the BIOS Setup.  But after Windows starts, it is as if he found neither.

  I tried to start Windows in Safe Mode and last known good Configuration and the behavior is the same, the mouse and keyboard do not work even if they do it in the BIOS.

  I tried a different mouse and keyboard and Windows behavior is the same.

  Now, I would like to have active remote destop. Difficult to solve without an input device.

  I found a solution for Windows 7 x 64 failing to detect any USB device on all ports USB to a HP Pavilion Elite HPE-500f.

  After that backup, read and edit the registry remotely to run the utility of Microsoft Devcon registry run key, Devcon announce an error message 39 for USB hubs.  Enter 'Windows error 39 usb hub' in a search engine led me to the next web page that describes the resolution of the problem. I removed the UpperFilters also well described and restarted key and until then. -See more at: http://www.tricksguide.com/solve-device-manager-error-code-39-on-usb-controller.html

• Cannot dual boot after installing Windows 7

  Hello

  I recently installed Windows 7 on a HARD drive that is partitioned with Windows 10. I formatted a partition with an old operating system on it, and Windows 7 installed successfully. However, I am more able to boot in Windows 10. I am not given a list of operating systems when I start the computer, and when I try to change the default OS, Windows 7 is the only one that appears in the list, despite the partition Windows 10 to still be here.

  How can I re enable the multi boot on this system? (I don't mind if it is to reinstall Windows 10)

  Follow the instructions in the following article:

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-dual-boot-Windows-10-with-previous-versions/9695dfc7-1C13-4D8D-B10B-587e78c6ac36

• SuperDrive drive broken don't Boot Camp Windows at El Capitan

  I tried many schemes proposed in this forum and at least a dozen different ways to do El Capitan boot camp Windows. I have run csrutil disable recovery and used the utility gdisk to rewrite the workout plan to use GPT.  It seems to go as far as the installation of all files of Windows 10 then I get the message Windows "Windows didn't prepare the computer to start the next phase of the installation.» To install Windows, restart the installation. "I tried bcdboot c:\windows and manually enter the drive and also the partition GUID I recorded option detail gdisk. But I get errors co so there is something that has always does not run.

  I have not yet tried Rufus. I used unetbootin to make my Windows 10 microsoft 64-bit ISO flash player. I also have an OEM Windows 8 disc bought three years ago. I am a little concerned by the barking of multiple trees simultaneously.

  It's a MacBookPro6, 1 EFI and SMC confirm current. 8 GB Crucial RAM. The SuperDrive doesn't work, or my burner USB Pioneer BD-204 (with confirmation last firmware, which actually turns into a BD-205) will allow you to install windows despite offering an optical EFI partition after the option - reboot. I was able to get Windows installed from a USB key that I did leave an ISO download unetbootin Using Microsoft as described. Maybe Rufus has solved this problem?

  I am entirely prepared to scrub the entire disk (that I had actually done yesterday, by a genius) and start from scratch if I could just find a step - who would work in reality. I really need to boot camp Windows 8 or 10 of this machine again.

  I'm even ready to install another internal drive instead the SuperDrive for boot camp Windows, but I want to assure you that I have does not work in the same exact questions if I take this step.

  Also boot camp just offers me the possibility to specify an ISO standard, there isn't that two not three check boxes and whenever I try from the disk, I get the black 'system unboot press a button' block after it restarts.

  I also edited info.plist of boot camp to add my model to the list of the 32 bit patterns.

  There is absolutely no problem backup etc., yesterday, the genius was so smart that he told me to try a Microsoft store.

  Please help this is going on 10 days, that I tried to fix this now. Should I go back to the Apple Store and ask them to put the Mavericks on this? That's how I got 8.1 Windows boot planted three years ago.

  Have you looked at this - http://forums.macrumors.com/threads/install-a-windows-7-partition-on-mac-osx-wit hout-optical-car-or - usb.1836959 / #post... ?

  Do not install a second Optibay drive, until Windows is completely installed, otherwise you will encounter more questions.

• Boot Camp Windows 10 Upgrade does not work

  Hello world!

  I use Windows 7 Professional SP1 with boot camp, I managed to function very well.

  I bought a legal copy of Windows 7 Professional and active, it yesterday, so all is good and works as it should (more or less)

  I did it on my iMac 5 k (end of 2014). I use version 6 of boot camp and installed all updates in OSX as well on Windows 7 via the apple software update tool.

  Now, I decided to upgrade to Windows 10 but somehow it does not work for me as it should.

  I am able to do 10 downloaded Windows and Setup will start, but immediately after it will crash.

  I use the German version so I can only tell you what is presented here:

  "eine handcrafted befehlszeile [/DynamicUpdate] angegeben wurde.

  I don't know what the problem is, I tried 3 times more using the Microsoft upgrade page.

  I also tried the MediaCreationTool but I still get the same error at the beginning of the installation.

  What I need to install additional drivers on my USB dongle or do I have to remove my USB mouse and the USB dongle (which is always to have the files to install boot camp Windows 7 top)?

  I don't see what else to do and hope that someone here knows how to perform the upgrade properly.

  Kind regards

  ela7ion

  Update!

  The upgrade succeeded finally!

  I managed to do the upgrade after removing all devices that are connected to the iMac before.

  This includes:

  -SuperDrive

  -USB mouse

  -USB dongle

  I then started the tool to upgrade from the Microsoft Web site and guess what: it worked.

  Best regards

  ela7ion

• Pavilion dv6-3225dx: laptop fails to boot after upgrading RAM.

  Hello

  Recently, I tried upgrading my laptop RAM 8 GB which is max you may have to wait. The RAM sticks were (x 2) DDR3 4 GB Samsung 1600 12800 mhz 1.35v. The system has detected the new RAM, showed the new memory and even spent the memory test. But this isn't the windows startup. I tried to clear CMOS. But without success. Do not let me windows. BIOS version is up to date (F29). Is there any setting for this?

  Thanks for all the help!

  Hello:

  Please see this discussion.  It must be very picky about what memory you use in your model series...

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/Pavilion-DV6-Windows-10-wont-boot-after-memory-upgrade-4Gb/m-p/5776161#M359223

• Can I do a dual boot with Windows 7?

  After taking all the precautions I can think to install Windows 7 on my wifes laptop. Drive recovery system, backups (2 DVDs) and an image I did more than 6 DVD.

  I thought why not only reduce the Vista Partition, install Windows 7 in the created partition and run Windows 7 to see if it will work on the laptop (gives me time to straighten out things so that my wife can always use). Then remove the Vista Partition. If the laptop was mine would just reformat the dang thing and deal with what it goes down from there.

  Then there is the Question of what to do about the EISA (recovery Partition)?

  Hello!

  Of course, you can install Windows 7 and do a system to dual-boot with Windows Vista... Why not? ;)

  As you have already said if Windows 7 works well on your laptop (I put t know which model you have exactly) you can remove Vista and use the old partition to store data or to include a new in the Windows 7 partition.

  The hidden partition do you mean isn't the Toshiba recovery partition! It is a feature of Windows.
  You can remove this partition you don t he most needs.

  In addition, with the Toshiba Recovery disk, you are on the safe side. If you don't want Windows 7 you can go to Vista (factory settings). :)

  Good bye

• H8 - 1330 PC with NVIDIA GeForce GT 630 after windows log in the black window with the cursor of the mouse only has

  Hello

  PC is a h8 - 1330's, and the graphics card is a NVIDIA GeForce GT 630 with driver version 9.18.13.270 dated 29/08/13. connected to a TV through an HDMI cable samsung. It is running windows OS 8.1.

  I installed 1 conc TV tuner card but otherwise the system is HP standard configuration as it was shipped.

  I think that I had a disorder with the pc update as I turned it on and after reaching the windows log on screen and pc connection seems automatic Windows boot in windows and I see only a black screen with the mouse cursor. I can ctrl + alt + delete and check out the Task Manager, but not other windows will appear. I tried to change username, sign in with a different account and get the same question.

  I'm fighting to enter the safe mode or any other mode at startup to the top to see if I can roll back the video driver.

  I tried pressing ESC then f11 to make a restore without success.

  I can't enter the mode without fail to start via shift + f11 or f11.

  My father has the same PC and does not see this issue.

  I was wondering if anyone has any suggestions of things I can try?

  hoping to try a software patch before trying the different video cards/monitors to isolate the problem.

  see you soon,

  Andrew

  Thank you for the additional information.

  Try this to see if it helps:

  To restore your PC to an earlier point in time

  1. Enter in the right edge of the screen and then click on search.
     (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click Find.)

  2. Enter the control panel in the start search box and press or click on Control Panel.

  3. Enter the collection in the control panel search box, and then tap or click recovery.

  4. Press or click Open System Restore, and then follow the instructions.

  Follow these instructions carefully to see if they will help you.

• "limited connectivity" on after windows update wireless router.

  Original title: "limited connectivity" on after windows update wireless router. happens all the time after soundcards implemented to date. I then 'restore' on the eve of going online. Why?

  I have... 'limited connectivity' icon wireless router in the toolbar after windows updates. happens all the time after windows updates. I then 'restore' on the eve of going online. Why?

  Hello
   
  What operating system do you use?
   
   
  Method 1:
  Check the update has been installed and make a note of this update.
  To check, follow these steps:
  a. Click Start, in the search box, type in update
  b. click on windows Update
  c. click view update history
  Note: If this isn't a significant update, you can hide the update.
  To hide an update, follow these steps:
  a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.
  b. do one of the following:
  o click the link that tells you important updates are available if you have some updates to hide.
  o click the link that tells you optional updates are available if you have optional updates to hide.
  c. Select hide any update you want to hide, right-click and then click on update. Do this for each update you want to hide.
  d. click OK.
  
  If it an important update then you can try the following method 2:
  
  Method 2:
  Download the update of the article mentioned below (enter the number of the update in the search), put the computer to boot and then install the update and check if that helps:
  Download here: http://www.microsoft.com/download/en/default.aspx
  Clean boot: here is the link:
  http://support.Microsoft.com/kb/929135
   
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

• When I turn on my blue screen laptop appear after windows error recovery windows also appear

  When I turn on my laptop, a blue screen appears after windows error recovery windows appear also... ask in safe mode are normal windows startup?... what I can do... is a problem on my system?... Please help me...

  Hello

  ·         What operating system is installed on the computer?

  ·         What are the error messages that are displayed on the blue screen?

  ·         Did you make any changes before the show?

  In the recovery menu, select Safe mode and check if you can connect?

  You can also try to restore the system in safe mode.

  If you are able to boot to the desktop in safe mode, then I suggest you put the computer to boot in safe mode and check if it helps:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Reference: resolution in Windows 7 stop errors (blue screen)