Cannot dual boot after installing Windows 7

Similar Questions

• Register of dual boot after installing W7

  Hello

  I bought a new SSD 1 TB drive last week I installed with W7 64 bit Ultimate.

  The old 1 TB HARD drive I connected later in the second HARD drive location.

  Now, I want to do a dual boot entry, as the HARD drive was not connected I installed the SSD drive.

  Is it a problem to do this? Or I have to re - install W7 on HARD drive now with this configuration?

  Bravo!

  Thanks for the explanation.

  A detailed explanation of your nonstandard configuration was certainly warranted. If we don't understand the way in which an application is made, how can you wait for someone to help you?

  You will need to purchase another license for the second installation.  the Microsoft Windows license agreement allows for installation on a single PC. Once you do this and activate the second installation with the recording servers you can use EasyBCD to edit the BCD file to make the two bodies work as a configuration almost dual-boot. If you do not want to use EasyBCD and want him to do how hardcore here is a link to a how-to. The data BCD bootloader file changes are not for the easily frustrated.

  Best regards

  ERICO

• can I pick up my dual boot after installing win xp on win 7. I lost my dual boot and my sytem starts with xp ony. I try to repair my system with win 7 dvd, but it only to get win 7.

  I have a system dual boot win - xp & win - 7. I reintall win - xp that disable my dual boot and I have win - xp.

  I'm trying to repair it with win 7 dvd but it only recover win - 7. can I pick up my dual boot? Help, please

  EasyBCD allows you to add the missing version of Windows in the start menu.

  EasyBCD (free for non-commercial use):
  http://NeoSmart.NET/DL.php?id=1
  http://NeoSmart.net/blog/2012/announcing-EasyBCD-2-2-Windows-8-dual-booting-and-more/

  J W Stuart: http://www.pagestart.com

• Cannot open iTunes, after installing Windows updates.

  Original title: I Tunes

  Just did a windows update and now ITunes doesn't open

  Hi Sean,

  To provide the proper resolution, I would need more information on your side.

  1. which version of the operating system are you using?

  2. What are the numbers of installed Windows updates Knowledge Base article recently?

  3. that you get an error message when opening ITunes? If Yes, what is the exact error message?

  This problem may occur if the iTunes software is corrupted.

  I suggest you to uninstall and reinstall iTunes and check if it helps.

  
  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  Hope this information helps. Please provide the necessary information to help you further, I'll be happy to help you.

• Acrobat 9 will boot after installing windows 10

  I installed windows 10 and Acrobat says "this program is part of a suite. Please open another component suite (Photoshop) what I did without success! Does anyone know what caused this and how to overcome?

  CS has specific requirements for the activation of AA9, even without taking into account the aspect of winning 10. If I understand well (I'm not a user of CS), you open one of the other applications and enable. While always open you can install/open Acrobat and turn on. I never make much sense out of these steps, but it that I remember seeing.

  The extent of the Win10, it's maybe AA 9 don't is not compatible with Win 10. Because although the step that's happened with win 8.1, so one would not expect win 10 be better.

• Cannot get online after installing windows XP Edition family on my laptop which was origally XP PRO

  I have a laptop HP Compaq 6830 s that had xp professional did not get a disc of bone with it when buying. The system crashed 0x0000007B error code. I installed OS XP Home version Pro Version and now I't does not recognize my modem or ethernet. Cannot get online. I'll tho the HP site and they don't have that driver for XP Pro Downloads Home Version. I go to the Device Manager and have question marks on the following - ethernet controller (PCI bus 134, device 0, function 0), network controller (bus PCI 3, device 0, function 0), PCI Device (device function 27 of the PCI bus 0 0), Universal serial bus (PCI bus 0, device 29, function 7) (USB) Universal Serial Bus controller (bus PCI 0) (, 26, function 7 device), unknown device (on PCI bus) properties, the properties of the unknown device (on system compatible ACPI Microsoft) and the properties of video controller (VGA Compatible) (bus PCI 1, device 0, function 0) all the points mark have (Code 28). Is there any wat I can fix this or should I install OS XP PRO?

  Go here--> http://www8.hp.com/us/en/support-drivers.html

  Enter the model of your computer.  If you just enter 'Compaq 6830 s' you get 3 choices.

  For example, I clicked on the link below and select the link for "XP Professional" coming to this page--> http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3688717&prodTypeId=321957&prodSeriesId=3688712&swLang=13&taskId=135&swEnvOID=1093

  You're right; There are a large number of items on this page.  You may be able to refine things if you enter your full product number, but if not, here are some general indications:

  "" For each of the downloads, click each tab on the download page and read the information on 'Description' improvements,' 'Instructions of Installation","System requirements"," Release Notes, "and"Revision history" before you install the downloaded driver.

  • Start by "Driver - Chipset" and use "9.1.0.1007 a (January 16, 2009).»
  • Then go to "driver - storage.»  Install the Intel Matrix Storage Manager driver.  Optional, but probably very desirable, install the new version of HP 3D DriveGuard.  You probably don't need (at least for now), the driver of chip card reader (unless you have an external drive of smart card).
  • Then go to "- Audio driver." Install the driver Microsoft UAA and the most recent drivers SoundMax ADI.
  • Then go to 'Pilot - graphics.' Install the new ATI video driver.
  • Then go to "driver - network."  It's a little more complicated.  Install the Marvel Yukon Gigabit Ethernet controller driver.  This will allow you to connect to your cable or DSL or your router by Ethernet cable.  You must determine if your particular laptop has an Intel or Broadcom wireless adapter.  Looking in the Device Manager in the "Network adapter" section, you should be able to make this identification.  Install the driver for the appropriate device.  If you believe that your laptop is Bluetooth compatible, install this driver as well.  The HP "wireless Wizard" is optional.  I would delay installing this at this stage.
  • Then go to "Driver - keyboard, mouse and input devices."  Install the Synaptics Touchpad driver and one for the HP Quick Launch buttons.

  At this point, most of your hardware should work correctly.  If there is always warning icons in Device Manager, you should be able to understand... or ask again here.  Read the 'Description' for other downloads to see if this is something you want or need.  Be aware, however, that many "Software" downloads are only updates or patches and not the complete package (which probably would have been preinstalled on a new computer.

• Cannot open lightroom and photoshop after installing windows 10?

  Cannot open lightroom and photoshop after installing windows 10

  I have uninstall lightroom and photoshop and try to reinstall... realy?

  Hi Olivier,.

  Please follow error: 'Missing msvcp110.dll file'

  Let us know if this helps!

  Kind regards

  Sheena

• Error message: Ethernet is not a valid ip address configuration and cannot connect to the Internet after installing Windows 8.

  Original title: Internet not working after installing Windows 8. Help, please

  I installed Windows 8 a week before, which had Windows Vista. When I was with Vista, I had no problem with the Internet, I had. But shortly after I installed Windows 8, the problem began. The connection is hardly 2 minutes. In addition, it is not navigate beyond my home page. After troubleshooting the result came as Ethernet is not a valid ip address configuration. It makes me really frustrated. After all, I was looking forward to navigate in windows 8, this problem makes me think really bad. If someone could help me, it will be grateful to you.

  Manorajan respected,

  I too had d same problem but I solved it later on myself.
  Here's how to: -.
  1-make sure you have intel network driver I installed your windows it pc. Download (on any other pc and transfer and install in it) and install it in your pc respective windows 8. Here is the link to download:-http://drivers.softpedia.com/get/NETWORK-CARD/INTEL/Intel-Network-Adapter-Driver-172-for-Windows-8.shtml
  Den DOWNLOAD realtek lan driver here to install http://drivers.softpedia.com/get/NETWORK-CARD/REALTEK/Intel-Realtek-LAN-Driver-80030730-for-Windows-8.shtml..if in the installation of theres no error ignore it... do not panic and reinstall... as it is already installed

  2 - unplug your LAN cable and Wi - Fi

  3 - go to network and sharing den center left side d click on change adapter settings clik left on the network card intel

  4-go to "Ethernet Adapter local area connection' properties and Deselect"Internet Protocol Version 6 (TCP/IPv6) "

  "5 - Select" ""Protocol Internet Version 4 (TCP/IPv4) '

  Press the properties button

  6 - Select "use the following IP address:" option and set this ips

  IP = "ip address".

  subnet mask = 255.255.255.0

  default gateway = your ip from the router (you can recheck all say on any other pc having a successful conection even wid tell by checking the properties of dial-up connection or any smart phone like any iphone or android mobile, if it is used as a wifi too in led staus/properties to your respective wifi name)

  7. in the second section select "use the following DNS server address:"

  Set "Server DNS PreferAlternate:" your router ip that entered u in "default gateway of" this. " pinterested ok and try to connect in wireless lan

• SD card is not working properly after installing windows 10

  I have a MacBook Pro (retina, 13 inches, early 2015) with EL Capitan 10.11.5 and after I installed 10 windows using bootcamp, everything worked fine at first, but after I deleted my part of windows and then installed windows 10 the second time, the SD card is not working properly. She mounts only if the computer shuts down first, and then start. If I take the laptop directly, the SD card will not rise. The same thing happens when I switch systems using a control option key or bootcamp Center where when I switched to another system, the SD card that was mounted on the old system does not appear in the new system. I was trying to solve this problem remove the part of windows before you reinstall it again once, so I found that after I deleted the windows part, the problem is gone and it reappeared after installing windows 10 even once. I also found that after I installed windows the total volume of hard drive (128g front) became 121g.

  Hello LorinMax,

  Thanks for this info and choosing the communities Support from Apple. I know the importance of your work with your Macbook Pro SD card!

  If I understand correctly, you cannot use your SD card, unless you stop and then restart. Because this behavior started when you installed Boot Camp, I would start with the following steps:

  1. first of all, start by repairing your hard disk in disk utility to correct the unexpected problems that could be the cause of this behavior.

  Disk utility (El Capitan): a disc repair

  2. use Mode without fail to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory.

  Try safe mode if your Mac does not end commissioning

  Graphics performance limited in recovery of OS X or in safe mode

  3. According to Boot Camp Installation & Setup Guide, you may need to back up your personal data and reinstalling OS X, then reinstall Windows via Boot Camp and related support files.

  Boot Camp Installation & Setup Guide

  Backup of your Mac hard drive

  OS X: on OS X Recovery

  See you soon!

• Disc Association file missing after installing windows 7 SP1,.

  After installing windows 7 SP1, trying to open the drives C, D, F, I get error message cannot open, lack assocition file, can someone tell me how to solve this

  Restore the Type Associations by default Windows 7 file Extension:
  http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.html

  Change the programs that Windows uses by default:
  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• I have Win Xp and Win Server 2003 (dual boot) is installed on my computer. I want to downgrade to only Xp instead of dual-boot.

  I have windows XP and Windows 2003 (dual boot) is installed on my PC. I want to format and put XP. When I tried to do by putting the XP CD, he takes for options

  Winddows 2003
  Windows XP Professional

  Choose one of the options above to start your device. (changed the 1st boot for CD/DVD device in the BIOS by pressing the DELETE key and then F10)

  Please help me with installing XP

  Hello

  I suggest you to send your request in the TechNet Forums for assistance.

  http://social.technet.Microsoft.com/forums/en-us/1355/threads

  It will be useful.

• Get his problem after installing windows update on May 18, 2016

  Original title: updated 18/06/2016

  Has anyone else been having sound problems with the new batch of updates? I tried to download the drivers, but that didn't work and now I had to restore my system from the 18th daily. Any ideas on how to identify the update is the cause or what driver I may have missed? My computer is a Dell Latitude E5420, running 64-bit Windows 7 Prof. Any other information needed let me know. Thank you!

  Hello

  According to the description, I understand that you are facing the problem in your computer after Windows installation updated May 18, 2016.

  Yes, you can view the installed update so that you can identify the updates that are installed in May 18, 2016.

  Please follow the steps to see updates history in Windows 7:

  1. Click the Start button.

  2. Then select Control Panel > programs.

  3. And then, under programs and features.

  4. Select view installed updates.

  View update installed please check that the update installed in May 18, 2016 and uninstall the update one & check if the sound is working well and find the culprit, update.

  Please follow the methods described below to check if it helps:

  Method 1: perform a Clean boot and install Windows Update.

  If its a major update, I recommend you put the computer in a clean boot state and install it again in order to minimize interference that could cause this noise problem.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 2: uninstall and reinstall the Sound Driver.

  1. Press Windows + X key.
  2. Type devmgmt.msc (to open Device Manager)
  3. Find and select the audio driver.
  4. Right click on the driver.
  5. Uninstall the audio driver.

  Windows automatically installs the generic driver, otherwise I recommend you download & install audio driver on the website of the manufacturer to check if it helps.

  Hope this information is useful, if the problem persists please write us back with the quick information so that we can help you further.

• Error "Windows Setup cannot continue. To install windows, click ok to restart the computer, and then restart the installation. "When you try to install Windows.

  How can I configure my windows 7 after restoring my laptop to the factory conditians?

  My laptop had a blue screen and I couldn't get rid of it, I went into safe mode and restore my computer to factory conditions. When the computer says "the installation program starts services" you stop and I couldn't turn it back on for 15 minutes. When I turned on and tried to contained my setup, a message keeps poping up "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install windows, click ok to restart the computer, and then restart the installation. "But no mader, how many times I reboot my laptop, the same message appears. What should I do? I've restored my computer several times and never had this problem.

  You should try another recovery.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

• After installed Windows 8 on my Dell Ispiron 660 PC, doing an update and download now black screen?

  Install Windows 8 on my Dell Ispiron 660 PC, Worked fine. After update of several programs, she has restarted. Now, I have a black screen and cannot fix.

  Install Windows 8 on my Dell Ispiron 660 PC, Worked fine. After update of several programs, she has restarted. Now, I have a black screen and cannot fix.

  To all those who responded. By chance, I removed a faulty graphics card and it has started up.

  Thank you all...

• Satellite Pro U200 - no sound after installing Windows 7

  Hello

  I have a problem with sound after installing Windows 7 on a (PLUA1E) satellite Pro U200. No Win7 audio driver available on the Nordic pilot site. Help, please.

  G.Magnason

  Hey Buddy,

  Have you already checked the site Web of Toshiba itself?
  http://EU.computers.Toshiba-Europe.com

  I found a driver for Vista 32 bit and Vista drivers most also work on Windows 7 so it s worth a try! :)