No computer or tabs in display screen saver properties

Similar Questions

• When you change any personalsettings such as theme, display, screen saver or any of those things I get the warning: «Cannot find file C:\Windows\system32\rundll32.exe...» »

  Original title: rundll.exe error

  Hi all

  I have a problem with my file rundll.exe. When you change any personalsettings such as theme, display, screen saver or any of those things I get the warning: "cannot find C:\Windows\system32\rundll32.exe file. Check if you have entered the correct name, and then try again. "(Sorry for any incorrect translation. I have a Dutch version of Windows).

  Is there anyone who can help me with this problem? I searched on several forums, but no luck so far.
  If it helps, I have Windows Vista Home Premium 32 BIT

  Rgds,
  Robert

  Hi Robert,.

  You can try the following steps.

  1 put the CD ROM Windows XP disc in the CD-ROM drive.
  2. click on start and then click Run.
  3. type expand X: \i386\rundll32.ex_ c:\windows\system32\rundll32.exe in the Open box, where X is the letter of your CD drive.
  4 restart the computer.

  Good luck Robert.

• How can I stop my computer to go to the screen saver when I for example runs a scan of the computer, sometimes my scan takes a long time to finish?

  My problem is? How can I stop my computer to go to the screen saver when I for example runs a scan of the computer, sometimes my scan takes a long time to finish? Example I have Microsoft Security Essentials set allow to run daily on 1200 AM and until he finishes my computer goes to screen saver Mode. and when I click on my mouse, I must sign completely new in my computer > how to stop this from happening, I want to keep my Security Scan open until there finishes?

  All the solutions for this?

  Original title: Windows Vista systems

  Hello

  This can help you:

  "Enable or disable the screen saver.

  http://Windows.Microsoft.com/en-us/Windows/turn-screen-saver-on-off#1TC=Windows-Vista

  And this is how do to change the time to wait before the screensaver comes on (article 8) and how to disable the password to logon to him (art. 9):

  http://www.Vistax64.com/tutorials/85539-screen-saver.html

  "How to disable or enable Protection by password on Wake Up in Vista"

  http://www.Vistax64.com/tutorials/102686-password-protection-wakeup.html

  See you soon.

• Why my computer will not go into screen saver mode, the settings are defined in law?

  Hello, I just rebuilt my computer. I run windows 7. I can't get my pc to go to screen saver mode. I run a Gforce 7800 graphics card, also

  I can't get my system to go in sleep and Hibernate, unless I do it manually. I checked all the settings and everything seemed ok.

  My drivers are all up to date. My email addy is * address email is removed from the privacy *.

  Thanks for your help,

  RSPRING

  Hello

  1 did you change on your computer?

  2. what happens when you try to change the screen saver?

  Method 1:

  Open the troubleshooter of power

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  I suggest you to follow the steps and check.

  1.	Open settings screen saver by clicking on the Start button, clicking Control Panel, appearanceand personalization, customization, then screensaver.
  2.	Under screen saver, in the drop-down list, click the screen saver you want to use.
  3.	Click Preview to see what your chosen screen saver will look like.
  4.	Click OK.

  The screen goes black when the monitor is set to mode 'Sleep' through the Power Options.
  Here is a link to some information about your Power Options settings:

  http://windowshelp.Microsoft.com/Windows/en-us/help/495c2226-19F1-49EB-9FD8-6dd7f2c0b49e1033.mspx
  Method 2

  I suggest you follow the links and check out them.

  Sleep and extended: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  Turn off a computer: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-off-a-computer-frequently-asked-questions

  Windows 7 is not going to sleep

  http://support.Microsoft.com/kb/976877

• Monitor turns off after 5 minutes & password protect when he wakes up. View properties - > screen saver "Wait: __minutes" and "on RESUME, Password Protect" checkboxes are grayed out.

  Help, please!

  I'm on a processor to work, so I've limited the administrative rights on the computer. My work function requires that I propose on the desktop to help others with professional assignments.

  THE PROBLEM: After 5 minutes of inactivity mouse/keyboard of the monitor off on the processor to work, she does not even go to a screensaver first, the screen turns off just in standby mode. When the mouse is moved or a key is struck, the screen lights up with a name/password user. I am developing carpal tunnel / repetitive stress syndrome having to retype my username and password so darn times per day, at the expense of some administrative setting of BOGUS Microsoft Windows... SHEESH!

  When I click on Start-> settings-> Control Panel-> display-> Display Properties-> screen saver , the "Wait: __minutes" and "On resume, password protect" checkboxes are GRISEES OUT [you can't edit these settings] . In addition, the default screen saver is set to void and no matter how many times I change it to something else and click 'Apply' return empty by default.

  TWO SERIOUS CONCERNS:

  Un When I'm away from my desk for more than 5 minutes, if someone arrives at my office, looking for me, it seems that my machine is completely off, so that co-workers can get the impression that I am out of the office when I could very well be just down the Hall.

  Two The Office I'm implemented in a motion sensor energy saving lights in the office, if the lighting turns off automatically too, so if I'm missing in the server room or help someone at their work station for an extended period of time, if someone comes to my office, looking for me, my machine seems to be completely off AND turned off the lights in my room , so it's as if I has not yet come to the office that day there! GRR...

  MICROSOFT, HELP US TO FIND a WORKAROUND: Help us make our work computers appear as they are wake / turned on while we are working work - especially when we ARE at work, just not physically sit behind our office temporarily work! GOOD GRIEF...

  Help us not to disturb our admins with specialized personal requests like these, they already have enough on their plate, ensuring that the network is in place and functioning.

  -JUDGES on Temp. Job Day @ assignment
  (Chained to a machine working at the expense of some fake Microsoft Windows administrator rights)

  PS. I have a screenshot of my locked dialog box display-> screen saver properties if you need more information. I wish I could download it right on this post to make things clear.

  PPS. Isn't it above described situation in the heart of the reason why employers more these days this demand we have iPhones, BlackBerry and SmartPhones? Because doctors and human beings humans with a bit of common sense finally realized that we must be sure that we move around during the day, at least several times per day, not only the stationary to our office location - watch a screen - ensuring that move us the mouse every five minutes so that our machine is not hibernate and look like it is not to do anything?

  PPP. If Microsoft can not help me with a work around for this issue because this issue is, 'something that I take with my 'network administrator',' kiss my _______! Everyone must be wrong because of the stupid administrative _ like this and if yes - I NEED TO KNOW - maybe I was just not cut for a job on time full computer.

  PEACE

  Hello JDG_SF, welcome.

  These options are very likely controlled by your GP (Group Policy) settings on your domain. Due to the nature of the work of rights how administrative, there is no way to work around this problem, unless you have access to change group policy settings that affect all the machines on your network.

  You would need to access or to change the settings of GP or find someone who already has access.

  For more information or get in-depth help, I would recommend pass this question to TechNet:
  http://social.technet.Microsoft.com/forums/en/categories/

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Setting the screen saver to display time

  On my old computer, I got the screen saver displays the time. I can't understand how do on my new computer.  Both have Windows XP.

  Hi Meki94,

  Simple, click Start-> settings-> Control Panel-> display-> screen saver-> select '3D text' in menu drop-down-> select settings-> Select time. Click ok on all screens.

  I hope this helps.

• Windows 7 is extremely slow to return to the screen saver mode.

  I installed upgrading Windows 7 on my computer and everything is fine.  However, when the system is idle and past in mode screensaver (with or without a password), the return of the screen saver mode are extremely slow (just a white screen).  It is sometimes quick, sometimes it comes back in 3-4 minutes, but most of the time it takes a long time.

  The system is a low end, but more than enough to manage w7.  It consist of:
  Pentium dual core (2140)
  2 gig memory
  NVIDIA 7300GT 256M

  I tried to delete the zone alarm security suite, does not solve the problem
  thought it was the HP 2610 print software, removed and still happens.
  update the bios (MSI p4m900)

  can someone figure this.  Is there something that prevents him to return to the desktop.

  Note that, I try to reboot from the blank screen by pressing the windows, right arrow, return.  But I think also, it does not address key strokes.

  THX

  I found a way to fix it! I did this:

  1. Press win + r and run msconfig. Go to tools and brand to troubleshoot the computer, and then click Start.

  2. then go to system and security and press electricityballance (not sure of the name in English because I have a Norwegian version..).

  3. restart your computer.

  4. my screen saver was not afterwards, but I gave it to display photos and now it works perfectly!

  When I checked the general tab afterwards, it did not have the checkbox to use the... start (a last..) one has been verified and the second has a blue full mark.

• screen saver on the logon screen

  Hi all

  in the settings I disabled completely safe screen. But now I've started my mac, waited half an hour and then tried to open a session. And... guess it... the logon screen showed a screen saver.

  So two questions:

  -where can I turn on / turn off screen saver for the logon screen?

  -where can I set up the screen saver for the logon screen?

  Greetings from the Germany

  Chris

  OK, a third party, but please Don t laugh:

  s ' is he or safer screen saver?

  In English, it means "Screen Saver".

  To set the screensaver used at the login screen, you can use the following command, which in this example is the name of the computer aka things. 'Message' screen saver.

  / usr/bin/defaults write /Library/Preferences/com.apple.screensaver loginWindowModulePath '/System/Library/Frameworks/ScreenSaver.framework/Resources/Computer Name.saver '.

  For more details, see these two items Apple.

  Managed client: how to customize the message of saving screen the computer name for the login window - Apple Support

  OS x: setting up a screen saver to display the login window - Apple support

• Computer returns to the Welcome screen instead of stay on the desktop. repairable?

  After 2 minutes, computer used to go to the econ. One click and you're back in the office. It now goes to the Welcome screen I have to click my name & it goes on my desk. How can I stop the he return to the wekcome screen?

  Hello

  Try to remove tickmark of "On RESUME, protect by password" or uncheck the "sΘlectionner the On resume, display welcome screen check box ' (If Fast User Switching is enabled) from start-> settings-> Control Panel-> display-> screen saver.

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/display_assign_screensaver_password.mspx?mfr=true

  I hope this helps.

• My screen Display Properties lack the screen saver tab?

  Recently, I installed XP on a new drive hard and now when I go to Display Properties screen by right-clicking on the desktop, there is no screen saver tab that allows the selection of a screen saver. What can I do to fix this?

  Try the fix of Ramesh Srinivasan:

  Restore missing tabs in the display properties dialog box
  http://www.Winhelponline.com/articles/38/1/restore-missing-tabs-to-the-display-properties-dialog.html
  Download: showalldisplaytabs - xp.vbs

• Why did the the screen saver tab missing from real estate to XP

  Under display properties, my screen saver tab is missing and I can't change the time-out settings...

  Hello

  1. have you made changes on the computer recently?

  Method 1.
  a. click on start, then run.

  b. type gpedit.msc in the Run dialog box.

  c. press ENTER on your keyboard.

  d. in the Group Policy Editor, navigate to:

  User configuration > administrative templates > Control Panel > display

  e. double-click the tab hide screen saver.

  f. Select not configured.

  NOTE: If the screen saver tab is missing on a per user account basis then the method above does not work, you must use the registry editor to remove the group policy.

  Method 2.
  Manual steps using the Windows XP registry

  Registry warning:

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows:

  http://support.Microsoft.com/kb/322756

  a. click on start, then run.

  b. type regedit.exe in the Run dialog box.

  c. press ENTER on your keyboard.

  d. navigate to:

  HKCU

  e. NoDispScrSavPage do a right-click to select Edit.

  f. change the value to 0.

  g. access:

  HKLM

  h. NoDispScrSavPage do a right-click to select Edit.

  i. replace the value 0.

  j. exit the registry (Regedit.exe) editor.

  I hope this helps.

• Screen saver computer name on the logon screen

  Is it possible to get the name of the computer screen saver to display the clock on the login screen?

  Not without using a saver different screen - and you are looking to do with the server itself, or with clients configured and managed by the server?

• photo screen saver does not display correctly the photos

  I've been running the screen saver of pictures on my Windows XP computer for quite awhile with no problems.  Recently however photos have been displayed too high on my monitor actually cut the top of the photo.  I don't know what changed, but I would really like to know how to restore it.

  I have my system dual monitors.  Windows allows you to drag you monitors around do them work together properly.  I had to drag the main monitor to a higher position.  It corrects the problem.

• Display settings, theme and screen saver windows are unclickable/not unresponsive.

  Hey well yesterday when I restarted my computer it set itself to a screen resolution 800 x 600. He has done this before, so I know how do to solve this problem, but when I went to view the settings to change the resolution of the window upward but my pointer turned to the insensitive loading blue circle and if I tried to click on what whether the program immediately become unresponsive. I checked and it was the same for any customization option that opened this area full settings, including the theme and screen saver. I am sure that this problem lasts for a long time, because I remember trying to update my screensaver a few months ago and have the box not to answer. But I have not had to use my display settings since then, so I thought nothing of it.

  In any case, help would be appreciated, because I really look forward to working with a resolution of 800 x 600. Thank you very much! :)

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ---------------------------------------------------------------

  If necessary try a system restore to before, it happened:

  How to turn System Restore on or off in Vista
  http://www.Vistax64.com/tutorials/66971-system-restore.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• After leaving the screen saver, display shuts off and change to select the user account screen

  I have a windows7 32 bit desktop. While everything works fine the problem is whenever I leave the keyboard and mouse intact even for one minute, the display turns off and change to select the screen of the user. 'Disable the display' and "put the computer to sleep" has been on 'never' and screen saver changed nothing but the problem still persists.

  Please provide the solution

  Hi Sam,

  Sorry for the late reply.

  I understand that when your computer is left idle, the select user screen appears.

  The issue can be caused if the power plan settings are incorrect.

  To get a better understanding of the issue, I want to know:

  1. What is the brand and model of your computer?
  2. You did it changes on your computer before this problem?

  To resolve the problem, try the following methods:

  Method 1: Troubleshooting to be able to run.

  The resolution of the problems of power check things as settings timeout of your computer, which determines how long the computer waits before turning off the display or enter the mode 'sleep'. These settings can help you save energy and extend the life of the battery in your computer.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  After trying method 1, if the problem persists, try Method 2.

  Note: When you're done, restart your computer and check if your computer works fine. If the problem persists, try Method 2.

  Method 2: Change the screensaver settings.

  I suggest you follow also the suggestion given in the answer by Vijay B answered the

  May 14, 2013.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/disable-automatic-lock-with-Windows-7/1d45e806-6a8a-492C-A0C7-ac85b759ad66

  Please, try the above suggestions and we provide the information required so that we can help you.