No defragmentation file after reinstalling XP - SP2
Try a repair installation
http://www.michaelstevenstech.com/XPrepairinstall.htm
Tags: Windows
Similar Questions
-
How can I restore my icons on the desktop to backup files after reinstalling Win 7 Home?
HD failure forced me to reinstall my Win 7 home page. Fortunately, I was able to save before total chaos ensued. (My set of files has been relatively low, so I did a copy/paste of my drive c: \.) How can I restore my desktop icons in the backup files?
Hi pb1313,
Thanks for posting in the Microsoft Community. It seems that you try to restore the backup after reinstalling Windows 7.
As you have copy and pasted the c drive visit this link if you want to manually transfer files ignore the title and see the steps mentioned in this link and check:
How to restore a Windows 7 computer to a previous Windows installation by using the Windows.old folder
http://support.Microsoft.com/kb/971760
Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.
-
Satellite M30 guard crashing after reinstalling and SP2
Hello
Can someone help me please. I have problems with my M30 Sat. It is 2 years old and I've never had problems with it before. However, I recently had an accident and decided to reinstall from the recovery CD. after reinstallation, I tried to download the service pack 2 and my computer crashes. I have not installed any other software and still keep having this problem. It's very strange because sp2 worked perfectly on my laptop until the recent accidents. Any help would be greatly appreciated, I reinstalled now for the third time and I am extremely frustrated.the error on the crash, I received was: * stop: 0X000000f4 (0 x 00000003, 0 X 86152950, 0X86152Ac4, 0X805f9f88)
Thank you very much
Hello
That s too bad that happens. Have you checked the information of Microsoft Windows XP SP2 update on the page of the Toshiba driver? The pilot Sat M30 area, you will find the document describing which application must be updated to use the SP2.
I recommend you first check this sheet before starting any installation of SP2. -
computer does not connect to the internet after reinstalling XP SP2 wit
After that the computer we reinstalled windows XP with SP2. The operating system loaded fine, but don't can't get the computer to connect to the internet. Went through all the steps suggested even check the Service Manager to ensure that the appropriate services are started. Any help would be appreciated.
Hi DamonBrigham,-What exactly happens when you connect to the Internet? You get an error message or error code? If Yes, indicate the same.-Do you have a cable or a wireless connection?If this is a wired connection, try starting mode safe mode with network and check if you can connect to the Internet successfully.Networking Mode safe mode starts Windows in mode safe mode and includes the network drivers and services needed to access the Internet or other computers on your network.
See this link for instructions on the boot safe mode with networking:
-
Cannot access a file after reinstalling Windows XP
After a system crash that trashed my MBR, I reinstalled windows XP and renamed my computer. Now, I'm locked on one of my previous files. How can I access this file again?
See here:
How to capture a file or a folder in Windows XP
John
-
Audio CD not a recognizable file (after reinstalling media player) extension
Windows Media Player 11 somehow got corrupted so I had to uninstall media player and reinstall it... After I do, if I insert an Audio CD and tell Windows Media Player to read the disc through Windows Media Player AutoPlay still errors with «the media selected (.)» is an unrecognized format. Do you want Windows Media Player to try to play? "no matter whether I select Yes, Windows Media Player will not play the CD. If I open Windows Media Player 11 manually (in the start menu) I can play from there, but not in the menu AutoPlay!
Hello
I suggest you to follow the links and check out them.
Method 1:
I suggest that disable you auto play then turn on and check.
Follow the link and check.
Change AutoPlay settings
http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings
Method 2:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 3:
I suggest also allows you to check user account again.
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
-
Cannot delete the files after reinstall Vista
Hard drive crashed. Reinstalled Vista who created a folder named Windows.old. I can't delete this folder or its contents. I tried the folder/file attributes, but it only works for some files.
Thank you
Here are two useful sites about Windows.old:
How to use the disk cleanup feature to delete the Windows.old folder after you install Windows Vistahttp://support.microsoft.com/kb/930527/en-us
Have a look here http://support.microsoft.com/kb/931702/en-us
-
Icon files and missing files after reinstalling Windows.
Original title: After a reinstall of windows and get my retrospective data, none of my shirts have icons folder of the files or subfolders
I could change some of the icons of the main file folder, but no icons subfolder.
Hello
Method 1:
I suggest you run the fix it and check if it helps.Diagnose and repair Windows files and folders problems automatically
http://support.Microsoft.com/mats/windows_file_and_folder_diag/Method 2:If the problem persists I suggest you try the procedure described in the article and see if it helps.Change the folder optionsYou can check the link for more information.Folders: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/folders-frequently-asked-questionsHope this information helps. -
Cannot open RAW files after reinstalling Photoshop CS4
I recently did a system restore in my computer because of the downgrading to Windows 7. However, after that I installed Design Premium to my PC, I am not able to open RAW files in Photoshop. He urged "Could not complete your request because it is not the right kind of document." I tried to check the updates of Photoshop, but there is no update available. I tried to reinstall Design Premium, but the problem persists.
My system configuration is as follows:
- Windows 7 Professional x 64 (still to install Service Pack 1, but I don't think it really matters)
- Adobe Creative Suite 4 Design Premium (Photoshop Version 11.0)
- Canon EOS 50 d (Firmware Version 1.08)
Anyone can have an idea on how to fix this? Thank you very much!
Screenshot as follows:
When you reinstalled CS4, you are returned to the original version.
Now you must apply all the updates of Photoshop and Adobe Camera Raw manually.
You can't count on the automatic updater for Adobe to tell you that you are up-to-date. This update has been broken for years, and which has been and is certainly the case with CS4.
Adobe is a not regroup until CS6 updater.
You must also manually update the ACR plug-in.
-
Cannot restore files after reinstalling Vista
My problem is that doubles 1. Everything I know about building and nothing about computers and 2. When I had trouble with my Word program, IE. It took 10 to 15 minutes to load, someone suggested that I reinstalled it to try to solve the problem. There can be no. Then, he suggested I have reinstall full vista I did. He asked if I wanted to back up my files, to which I answered Yes. It took several hours to install fuly and when I got home he had finished and almost nothing on the screen except a few editing base. He had of course saved and everything saved on the hard drive somewhere, I had a friend TI to throw a glance and he was not at all familiar with it. But he had found and restored in a file named "bob." But the big problem is that I can not open an any of them as file extensions are unknown. I really need to bring them especially my photos. My backup of records were destroyed in a fire of the site office and all the photos of my partner who died since in a car accident, were there. So close they are tempting, but cannot display. I tried to Microsoft to take over my computer remotely and sort it out for me, but may not return to the right place in the vast world of Microsoft.
Anyone can help, but it must be in plain English and not the computer language.
My computer is a Dell Dimension 9200 and vista is small business. ;Hello jonowlbarn,
Thank you for using the Microsoft Windows Vista Forums.
Before you reinstalled Windows Vista didn't have you backed up your files? If so you back up your files on the same hard drive that Vista has been installed on? If Yes, then performed reverse would be erased when you remove Vista. I added some information below for that matter. Please let us know status. Thank you!
To make sure that you do not lose the files you create, edit and store on your computer, you must save the regularly. You can back up your files any time or manually configure automatic backups.
Note The ability to set up automatic backups is not included in Windows Vista Starter and Windows Vista Home Basic Edition.
1.
Open the backup center and restore by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then click backup and Restore Center.
2.
Click back up files, and follow the steps in the wizard. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
No backup files on the same hard disk that Windows is installed. For example, to make the back not files on a recovery partition. Always store media used for backups (external hard disks, DVDs, or CDs) in a safe place in order to prevent unauthorized access to your files; a separate fireproof place of your computer is recommended. You can also consider encrypting the data on your backup.
In addition, please see the links below:
Back up your files
http://windowshelp.Microsoft.com/Windows/en-us/help/699ce30c-13f1-46EC-9684-e84bf4109dd81033.mspxRestore backup files
http://windowshelp.Microsoft.com/Windows/en-us/help/55e35b7f-58ab-409b-997C-bcc81d64c4271033.mspxEngineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
original title: How can you recover files, folders, software and drivers after reinstalling windows xp family? Please help, I've lost everything!
When the update Norton Internet Security 2009 to 2011 on reboot, windows cannot open.
Root\systems32\hal.dll Windows prevented windows from opening. My machine in a Dell dimension 8300.
On a Dell website, I found a method of recovery if you can reinstall windows xp from cd. I was able to do it, but lost all my files. How can I recover all my fortune, images, software, drivers, etc.? There must be a way to extract this information from the hard drive. Any help is the material and can save my marriage! Thank you.
Hi MarkS_02127,
Since you've reinstalled windows, you will need to re - install applications once again, you will be lucky (if you format the drive) data on your computer. You remember that location, it was in my documents? If yes it just open C:\Documents and settings and locate your old username, you will find your old desktop, Favorites and Documents.
I hope this helps.
-
files lost after reinstalling Vista
I had problems with my computer said to reinstall vista to solve the problem, but now I lost all my photos, music and documents.
Is it possible to get them all back, or are they lost?
Hello
a clean install wipes the hard drive clean of everything
You cannot undo what you've done
If you have lost data, you can try this
http://www.Piriform.com/Recuva
Read also:
Since we don't know exactly how you reinstalled it seek a windows.old folder
How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation
http://support.Microsoft.com/kb/932912
If the above does not work:
Try the data recovery experts
but they are very expensive
-
HELO,
I get this error after reinstalling Acrobat XI Pro under Windows 8 Pro:
Update-Fehler
Fehler bei der D:\Confifig.msi\PTE94D.temp Datei auf Patch application. Die Datei wurde auf andere Weise und kann von diesem Patch updated already clarinet
Nicht mehr RA werden. Wenden Sie sich mit questions a Patch-Hersteller your.
http://kb2.Adobe.com/CPS/852/cpsid_85258.html
There is no solution for this kind off problem?
First step: uninstall the software and remove all files
Second step: install the new 11pro Acrobat
Third step: Update new manual with the error again.
(http://kb2.adobe.com/cps/837/cpsid_83709/attachments/Acrobat_Reader_Updater.pdf)
Regarding
I saw before messages on a file that can be deleted to resolve the problem of update, you experience apparently. The alternative is to download the updates from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows and install it manually.
-
After Reinstalling windows 7 stopped opening PSD files.
After Reinstalling windows 7 has stopped opening some files PSD files. I try to open them with Photoshop version 6, it does not work. I tried to open them on the laptop, same garbage. Tell me what is the problem. And how to fix it. Thank you.
Maybe these files have been corrupted. I can't say how it happened, but it is quite possible. And the files are no longer open, immediately after reinstalling windows? Or not?
If so, it is very rare in my opinion. You are very unlucky. Try to reinstall photoshop. Then check that these files have been opened or not. In the opposite case. Then the only solution is a special software. I would use this program http://www.photoshop.recoverytoolbox.com/ on your site
(it is not free but is very good and is not expensive. But in the future you will be immune to such situations. )
So you can learn more about your problem here: http://www.filerepairforum.com/forum/adobe/adobe-aa/photoshop/207-can-t-open-a-psd-file-th rough-photoshop
-
I have a XP Home SP3 operating system corrupted on my eeepc netbook, I have my original XP SP2 disc, I tried to reinstall this disc, but after reinstalling from says "windows is unable to install an older version over a newer version" and I find myself starting with a choice of versions XP and I choose who I want ONE; How can I reinstall my XP SP2 os and b: how to remove the choice of operating system error in the startup message, reinstall it loaded some windows files, which may be why I get the choice of Windows XP and Windows XP Home Edition to start. I don't know what to try then sought most of the questions on the sites Windows Sites, but no help.
Create a "Slipstreamed" of integrating XP SP3 version
AutoStreamer, it is easy to use and for the most part explicit.Guide auto Streamer and Download Sites:
http://www.simplyguides.NET/guides/using_autostreamer/using_autostreamer.shtml
http://fileforum.betanews.com/detail/1092632287/1Where to download SP3
(This file that will be used to created the slipstreamed CD)
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5e76-401F-BE08-1e1555d4f3d4&displaylang=enCreate a version Slip Stream of Windows XP with SP3
http://www.webtree.ca/WindowsXP/slipstream.htm (With the help of AutoStreamer)
http://www.theeldergeek.com/slipstreamed_xpsp3_cd_final.htm
http://www.winsupersite.com/showcase/xpsp3_slipstream.aspYou create the slipstreamed CD will not include specific drivers
for your motherboard, video, audio, network, etc... Those who you will be
need to download to your PC or motherboard manufacturing
Web site.Never be afraid to ask. This forum has some of the best people in the world to help.
Maybe you are looking for
-
iMac G4 as a secondary screen for MacBook Pro
I have an old iMac G4 which I would use as a secondary display for my MacBook Pro (13-inch, mid-2012). My guess would be to use the VGA port and port G4 mini Thunderbolt of the MBP but can work? And what kind of cards can I use? Thank you very much
-
OfficeJet 4215: impression disaster
Naturally, I have a deadline and a huge problem with the printer. 1. it wouldn't print (if there is no problem with scanning) and it will not clear the print queue - fair States "deleting" forever. 2. I tried to use printing HP & scan doctor barely p
-
can not find the drivers and software
Hello I use an old Compaq presario 6000 series desktop computer. I had just formatted the Office to install a fresh sp2 XP. Unfortunately, after formatting and installing XP, I found that I had lost the CD for the drivers. I don't know how to find th
-
I had to restart my computer.since then all the programs I try to download come up with this version of windows is not supported. what I do about this .cheers
-
Recently, I had a problem in that, plugged in my camera and also my phone options auto run does not come up as they used to do. The cameras appear under my computer and in Device Manager but not under "Devices that you connect to your computer will b