No device startup & questions more

Similar Questions

• Message says that this device may function more quickly.

  I just bought a usb hub 4 ports to run my printer, USB key and a receiver 2.4 ghz for my keyboard and mouse, since then I get this message this device can run faster , I opened, but I do not understand what its actually means!
  I am happy with the speed because it is at the moment so can I get rid of this pop like me crazy! in this case every 5 minutes or more, also atuoplay
  window for my cd/dvd drive also opens in the background at the same time. I'm relatively new to this game, so if you could help I would be much obliged
  If you could explain the answer Mr. thow I was a 10 yr old it would help :)

  MIK niwdog

  MIK niwdog,
  Thank you for visiting the Microsoft Answers community forum.

  What a message means that you have plugged a USB 2.0 on a USB 1.1 device.  Try connecting the device to a different USB port on your computer.  If the error keeps popping up, here's how to disable:

  Open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  Expand the section indicating Bus USB controllers.
  Right-click on anything that has the word "controller" at the end, as a Standard Enhanced PCI controller USB host (or something similar), click Properties, click Advanced, and check in the box that says "don't tell me about USB errors".

  AutoPlay is popping up because he sees your USB and want to autoplay anything on it.

  How can I stop asking me what program I want to use?

  Disable AutoPlay for only one type of media
  1. open AutoPlay by clicking the Start button, clicking Control Panel, on material and audio and then click AutoPlay.
   
  2. in the list next to each type of media that you do not want to be asked questions on, select take no action and then click Save.

  Let us know if you need more information.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP dv6810us 'Base system device' problems AND MORE!

  Hello!

  I have a problem I have been struggling with for several months now. I do not know what is happening and am puzzled because. I will describe what is happening as well as I can and expect an answer.

  My laptop is a:

  Laptop HP Pavilion Entertainment PC model DV6810us. I run Vista, of course.

  I had this laptop for my 16th birthday a year and half ago. As expected, it worked like a power all the time. Around my 17th birthday, he began to have some overheating problems. Attaches easily with some canned air.

  However, soon after, I started to have some other, more distinct problems. The first was, on start-up, I've received an error message indicating that the module of HPwinmx (sp?) had stopped working. A few weeks later, I started to receive alerts from Windows with "new hardware found". Specifically, three system of Base and an IEEE 1394 controller devices. At the same time as these physical alerts, my ports series and s-video stopped working, my cd player, as well as my multicard reader.

  At this point, all attempts to reinstall the drivers for those devices were unsuccessful.

  Needless to say I was due for a while on what was still working. There is not enough money to get the extract. Sometimes, at the start, all these devices would be online for no apparent reason. I reasoned that the material must be end - no melted connections or shorted wires. It must be in the drivers.

  Last Thursday, my laptop has informed me that I had no speakers, microphone or headphone jack. Being a music and a drug of Hulu, which could not support. I decided the best way to solve this problem would be to back up my files to an external drive and wipe my laptop to a factory state using System Restore HP. Well, I just finished that about 01:30. And now, nothing, and I mean absolutely nothing changed. Same features, same problems, etc, etc.

  I cracked her open to find internal damage. I don't see nothing, for what it's worth. =/. A crossed the CMOS and BIOS for info. No change. However, when I look at my startup journal, he told me what PCI bus are turning back errors. I have been unable to pause and see what he said, and the information was retracted before I could read.

  I couldn't be more confused about what is happening here.

  For the love of God and all that is holy, just WHAT is going on here?

  ---------

  For reference, here are the details on errors for three basic system devices:

  Description:
  Windows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site. Your device hardware ID is PCI\VEN_0180 & DEV_0843 & SUBSYS_30CF003C & REV_12.

  Signature of the problem:
  Problem event name: PnPDriverNotFound
  Architecture: x 86
  Hardware ID: PCI\VEN_0180 & DEV_0843 & SUBSYS_30CF003C & REV_12
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?link...3&clcid=0x0409

  Description:
  Windows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site. Your device hardware ID is PCI\VEN_0180 & DEV_0592 & SUBSYS_30CF003C & REV_12.

  Signature of the problem:
  Problem event name: PnPDriverNotFound
  Architecture: x 86
  Hardware ID: PCI\VEN_0180 & DEV_0592 & SUBSYS_30CF003C & REV_12
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?link...3&clcid=0x0409

  Description:
  Windows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site. Your device hardware ID is PCI\VEN_0180 & DEV_0852 & SUBSYS_30CF003C & REV_12.

  Signature of the problem:
  Problem event name: PnPDriverNotFound
  Architecture: x 86
  Hardware ID: PCI\VEN_0180 & DEV_0852 & SUBSYS_30CF003C & REV_12
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?link...3&clcid=0x0409

  Description:
  Windows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site. Your device hardware ID is PCI\VEN_0180 & DEV_0832 & SUBSYS_30CF003C & REV_05.

  Signature of the problem:
  Problem event name: PnPDriverNotFound
  Architecture: x 86
  Hardware ID: PCI\VEN_0180 & DEV_0832 & SUBSYS_30CF003C & REV_05
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?link...3&clcid=0x0409

  Most certainly. The cost of a new motherboard is going to be at least $ 250 for you and this is simply too much to spend for a repair. Your parents may think differently. A new motherboard is about $150 online (not of HP they charge more than double that) and labor is about $ 100 to $ 150. You would need to find a reliable repairperson or there are several good online, too.

• MacBook 3 beeps on startup (and more)

  Friends,

  I had a lot of trouble with my mac from a few months ago.  I first noticed the problem when I take my Macbook Pro in the upper left corner of the base (entering by the ESC key).

  After that I take it, the computer will restart immediately.  It wasn't a huge problem until my laptop started beeping 3 times at startup.  In the end, I thought that it was a situation of RAM, and he just needs to be replaced.  This is my go - to fix if the beeps never started again (which they would be weekly or more).  My problem got worse and worse and the beeps return earlier and faster.  I'm constantly afraid closures hard are eating away at my computer and I don't know what to do.  Every now and then, the aura of bars, crossing, screen to enter the upper left corner.

  Any help is appreciated, I intend to take it in as soon as I get home (I'm a student) but want to see if there is something I can do.  LANDAU has been reset, and all the RAM have been pre-installed.

  I work with a MacBook Pro (13-inch, mid 2012) and El Capitan running.  8 GB 1600 MHz DDR3 RAM that say 'OK' in the diagnosis.

  Thank you guys so much, let me know if I can provide further information.

  Three beeps indicate that RAM is unable or does not, and must be replaced.

  You can run the help Apple Hardware Test - Apple Support

• FIFO device custom questions

  Question again on the custom device.

  If there are 200 channels of output but every 100ms only 40 of them updated by the driver.

  Is it possible to write only the 40 channel data at the exit of the FIFO device at a time?

  What is the write FIFO RT speed when writing 200 channels of data at once?

  Thank you.

  If your custom device is a custom device inline, you update only the channels dedicated by iteration.

  In the case of an asynchronous (parallel) custom, you are forced to write always all the channel stack regardless of what happened to values. (if none of the values have changed, so it's ok not to call the Write FIFO function).

  FIFO writing does not cause a huge head.

  You can compare easily than yourself well.

  Tom

• Pavilion dv5 startup question point

  This morning when I got to the top of my dv5 Pavilion (with Vista installed), after showing the logo of HP, the screen went black and does nothing else. I have repeated many times and also tried going to the start menu, all this without success. After Googling the problem, I tried to remove the battery (which is 6 years old and has absolutely no charge) and cable load and hold the power button for about 20 seconds. Someone on a forum I read stated that it needed to dump any residual charge in all of the material. However, after replacing the battery and charging cable, the problem persisted. Another source suggested commissioning with the battery removed, linking directly to the power of the charging cable. It worked.

  My question is if someone can explain WHY it worked. What difference does make if the power comes directly the supply cable vs from cable, thanks to the battery, then the material?

  Sebastian42 wrote:

  I already assumed that the battery has not (or close to it). Even when the power cable is connected, the status of the battery in the bottom right of the screen shows a constant load of 0%. The only reason why I have let in the laptop at this point is because it feels strange to have a big hole in the lower part of the machine. I have not replaced because I never really need the laptop in a place where there is no outlet and do not see the point of spending money (I'm a poor student, after all).

  When I said "battery replacement", I only intended put the original back in.

  When the computer is started at the beginning, the BIOS temporarily control the charging of the battery until the OS has finished starting? Yes And if so, the fact that the battery is more charges bring somehow the BIOS to get stuck before can start the main OS?

  I guess what I'm asking is this: the BIOS tries to start to charge the battery and then get caught in some kind of loop when loading does not work as usual, thus preventing the later stage of the start-up of the main OS?

  I would remove the battery until a replacement is available. A lot of people this, when a laptop is used only as a replacement of PC desktop. It does not hurt a thing.  When a failed battery is left in place, you take a chance.

  On the inside of the battery, the battery pack controller card failure is likely to be the reason why the laptop does not start in Windows with the battery installed.

• BlackBerry software Z10 Q10 device switch question

  Attempt to use Blackberry link to a switch of the device to a Z10 with Q10.

  See the error message:

  http://i.imgur.com/PBScXOe.PNG

  

  Legend of the error:

  No data is transferred

  No data is transferred for the following reasons:

  -The version of the OS on your new device is older than the version of the OS on the device, that you spend. Select a different device or cancel the transfer

  Versions of the software:

  Q10 - not locked to Bell Mobility - 10.1.0.238 - no software update available

  Z10 - not locked to Bell Mobility - 10.1.0.273 - no software update available

  Don't link Version - 1.1.0.37 - no software update available

  Unfortunately, this is a limitation of the BONES of BB10. You cannot restore a backup of a newer version of OS to an earlier version. You can restore a backup from an earlier version to a version identical or newer only.

  You need the Q10 to be on a more recent version. Your only option is to install a "leaked OS ' on the Q10 in order to be able to restore your backup data or transfer.

  Here is a link to the latest OS for the Q10. Everything you do is download the file, it will be a .rar file, so you will need a tool for decompression like 7zip to unzip the .exe file. Then connect the Q10 and run the .exe file and it will update the operating system. Need you more time to download the different file in order to install it, too. It takes about 5 minutes to load the new operating system.

  http://CrackBerry.com/leaked-OS-10102342-BlackBerry-Q10

• Cannot start device - ASDM question Manager

  Hello

  I have recently updated our router to spare ASA 5510 to version 9.1 (3) with image ASDM Version 7.1 (5) 100.

  The customer I try to run the ASDM launcher on Windows 7 x 64 is the latest version of Java (updated 7-5).

  I am able to do at the hand of the screen when I have https to the device.  I can install the ASDM launcher, but as soon as I get the host name and the password I have the following error "could not launch 192.168.X.XXX Device Manager."

  I went through a checklist and I can confirm the following:

  -3des-sha1 license is activated

  -Http server is enabled for my customer subnet

  -ssl encryption is enabled

  -Tried Firefox and IE10

  When I try to run the ASDM via the browser I go as far as to ask for the password, and although the initial prompt seems to accept it, an another authentication box will appear asking you to do this over and over again in an infinite loop.

  I have lived through many forum posts and checklists, but I can't seem to identify this problem.

  If it helps, the box was already flashed back to factory default before I then applied the configuration from scratch (depending on the configuration of our live cam ASA 5510).

  Can anyone help please?

  Thank you

  Hi Anthony,.

  Since then, you must have more control on ASA:

  AAA authentication http LOCAL console

  Alongside this, there should be a user name and password in the local data base of the SAA. Then try to configure command, then check:

  username cisco password cisco

  After this attempt to access two cisco ASDM with username and password and check if it works or not.

  -Prateek Verma

• Cisco NAC device filtering question

  Cisco NAC provides support for devices such as printers, IP phones, UPS failure, etc. by adding them to a list of filters.

  This allows these devices to bypass basically the NAC system and is only available on the network.

  My question is this. If exempt us these devices of the NAC evaluation, where is the security? What prevents a person to set the MAC address of the printer using a laptop?

  I can't imagine on this subject has not been raised before, but I can't seem to find an answer.

  Thanks in advance for your answer!

  Tom

  Well Yes, it was a big critical with the NAC device out of the box. There is no way to prevent the usurpation of MAC. Cisco has another device called parser SNAC, that solves this problem, but it costs extra.

  http://www.Cisco.com/en/us/prod/collateral/vpndevc/ps5707/ps8418/ps6128/product_data_sheet0900aecd806b7d4e.html

• ACS device groups Question

  Hello

  I have install ACS with a device group that covers a large number of devices on my network and I apply rights to this if necessary.

  But now I need to give to a group of users access to a single device that is included in this group. I can't create a new device group to cover this unique device as the address overlaps. Is there a way that I do this without having to split my existing at least 3 volume group.

  Hello

  This can be achieved by using restricted access network (OAN) GBA.

  By NAR, you can deny access permission/user/group based on device/NDG/NAF.

  The following link can give you more details about it:

  http://www.Cisco.com/en/us/products/sw/secursw/ps2086/products_white_paper09186a00801a8fd0.shtml

  Note: If you do not get the option to NAR allow configuration of the interface.

  ~ Rohit

• Error at startup TSAM more Manager 12.1.3 RP06

  Hi all.

  I have problems to start Manager Tsam more. When I run the script the start doesn´t feature startup.sh and I get the following error in the tsam.log:

  < 2015-08-12 10:07:24, 716 > < ERROR > < localhost-startStop-1 ContextLoader.initWebApplicationContext:215 > - failed to initialize context

  org.springframework.beans.factory.BeanDefinitionStoreException: definition of invalid bean with name 'persistSchedule' defined in ServletContext resource [/WEB-INF/applicationContext.xml]: couldn't resolve placeholder ' MAX_JVM_M

  EMORY_THRESHOLD'

  at org.springframework.beans.factory.config.PropertyPlaceholderConfigurer.processProperties(PropertyPlaceholderConfigurer.java:268)

  at org.springframework.beans.factory.config.PropertyResourceConfigurer.postProcessBeanFactory(PropertyResourceConfigurer.java:75)

  at org.springframework.context.support.AbstractApplicationContext.invokeBeanFactoryPostProcessors(AbstractApplicationContext.java:553)

  at org.springframework.context.support.AbstractApplicationContext.invokeBeanFactoryPostProcessors(AbstractApplicationContext.java:527)

  at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:362)

  at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:255)

  at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:199)

  at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:45)

  at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:4939)

  at org.apache.catalina.core.StandardContext.startInternal(StandardContext.java:5434)

  at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:150)

  at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:901)

  at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:877)

  at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:633)

  at org.apache.catalina.startup.HostConfig.deployWAR(HostConfig.java:976)

  to org.apache.catalina.startup.HostConfig$ DeployWar.run (HostConfig.java:1653)

  to java.util.concurrent.Executors$ RunnableAdapter.call (Executors.java:452)

  to java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:314)

  at java.util.concurrent.FutureTask.run(FutureTask.java:149)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:897)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:919)

  at java.lang.Thread.run(Thread.java:738)

  My startup.sh script is:

  #! / bin/sh

  #

  # Copyright (c) 2009 Oracle

  # All rights reserved

  #

  #

  # start TSAM

  #

  CURDIR = 'pwd '.

  TSAMDIR=/dev/app/Oracle/Tsam12cR2/tsam12.1.3.0.0; export TSAMDIR

  JAVA_HOME=/dev/app/Oracle/Tsam12cR2/tsam12.1.3.0.0/... /JRE/1.6.0. Export JAVA_HOME

  JRE_HOME=/dev/app/Oracle/Tsam12cR2/tsam12.1.3.0.0/... /JRE/1.6.0. Export JRE_HOME

  Path=/dev/app/Oracle/Tsam12cR2/tsam12.1.3.0.0/... /JRE/1.6.0/bin:$Path. export PATH

  JAVA_OPTS = ""-Xms512m - Xmx1024m - XX: PermSize = 64M - XX: MaxPermSize = 256 m '; " Export JAVA_OPTS

  CATALINA_HOME = $TSAMDIR/apache-tomcat; Export CATALINA_HOME

  CD "$TSAMDIR".

  # Start TOMCAT

  echo "starting TOMCAT".

  Beginning of the "$CATALINA_HOME/bin/catalina.sh".

  CD "$CURDIR".

  echo 'done '.

  Sleep 10

  echo "you can connect to the Console TSAM to------" http://crux: [port]/tsam/faces/index.jspx ] \""

  echo "the [port] default value is 8080. "The [port] value is located in the following file \"/DEV/app/oracle/Tsam12cR2/tsam12.1.3.0.0/apache-tomcat/conf/server.xml\.

  It seems that this error is somehow related to the - Xmx1024m parameter in the JAVA_OPTS, but I'm not sure of that (I'm not really a JAVA guy). Can someone give me help?

  Thank you

  Hello

  He is not related to-Xmx1024m. The stack trace indicated error, placeholder MAX_JVM_MEMORY_THRESHOLD in applicationContext.xml could not be resolved.

  It is strange that there is a new parameter introduced since RP008, so it should not be there if you use RP006. Please confirm your RP level.

  And the value of the parameter should be read of DEV/app/oracle/Tsam12cR2/tsam12.1.3.0.0/apache-tomcat/webapps/tsam/WEB-INF/tsam.properties, but it isn't there somehow.

  By applying a RP and re - run the script, the tsam.properties and AppServerDeployer.sh applicationContext.xml file are consistent.

  Kind regards

  Chris

• "Other devices" yellow question marks

  In my quest to have sound on my computer, I noticed that everything on my "Other devices" tab in "Device Manager" has the yellow question mark next to them. I have a "Biometric coprocessor" "Network controller" "Controller of Bus SM" and a "Unknown device" tab listed here. Should I be concerned by these? And, if so, is this another driver issue, as if the sound was? Thank you for your time and this is my specifics.

  MS Windows XP Professional SP3 32-bit
  CENTRAL PROCESSING UNIT
  Intel Core Duo T2700 @ 2.33 GHz 54 ° C
  Yonah 65nm technology
  RAM
  2.00 GB Dual-Channel DDR2 @ 332 MHz (5-5-5-15)
  Motherboard
  LENOVO 20088DU (no) 57 ° c.
  Graphics
  Monitor Plug-and-Play (1400x1050@60Hz)
  512MB ATI MOBILITY FireGL V5200 (Lenovo)
  Hard drives
  HTS721010G9SA00 Hitachi 98 GB (SATA) 33 ° C
  Optical drives
  HL-DT-ST DVDRAM GSA - 4083N
  Audio
  SoundMAX Integrated Digital HD Audio

  This table can help you.

  You can also try to identify the device in Device Manager on the "details" - tab of each device in the "Device instance ID".

  If there is an ID as "PCI\VEN_yyyy & DEV_xxxx... "entry"xxxx"in the right field imput on www.pcidatabase.com

  In the result list to compare the "yyyy" (above) with the VEN ID and then you have found the name of the device.

  Other/similar "device instance ID" starting with 'USB '.... ' or 'ACPI' you will find in the table I linked above.

  Drivers you can find here

  Be successful.

• Deploy VCSA device with questions answered? How?

  Hey guys,.

  Pretty novice here with pcli.

  When I deploy a device, the example vshield or the vcsa using the c# client I have to enter the ip address, domain name full etc. etc. Then after and end for the device that will be deployed.

  Now how do these parameters in a script pcli?

  The cmdlet import-TIME is not that. How I will know ahead that would require a device as parameters when I use pcli?

  Please help me, google me has no a lot yet.

  Thank you

  RJ

  In fact, it is a new feature in PowerCLI 5.8 R1, which we published on Monday, you can now use the Get-OVFConfiguration cmdlet to create a response object and then pass it to the cmdlet Import-VAPP and example of this is below which I created for Insight journal, soon you can see more about it on the PowerCLI blog and my personal blog.

  # Load OVF/OVA configuration into a variable
   $ovffile = "C:\Software\VMware-vCenter-Log-Insight-2.0.3-1879692_1.ova"
   $ovfconfig = Get-OvfConfiguration $ovffile
  
   # List properties of the OVF/OVA configuration
   $ovfconfig
  
   # Get the values to use for deployment
   $VMHost = Get-Cluster "Cluster Site A" | Get-VMHost | Sort MemoryGB | Select -first 1
   $Datastore = $VMHost | Get-datastore | Sort FreeSpaceGB -Descending | Select -first 1
   $Network = Get-VirtualPortGroup -Name "VM Network" -VMHost $vmhost
  
   # Fill out the OVF/OVA configuration parameters
   $ovfconfig.DeploymentOption.Value = "xsmall"
   $ovfconfig.NetworkMapping.Network_1.Value = $Network
   $ovfconfig.IpAssignment.IpProtocol.value = "IPv4"
   $ovfconfig.vami.VMware_vCenter_Log_Insight.hostname.Value = "LI01"
   $ovfconfig.vm.rootpw.Value = "VMware1!"
  
   # Deploy the OVF/OVA with the config parameters
   Import-VApp -Source $ovffile -OvfConfiguration $ovfconfig -Name "LI01" -VMHost $vmhost -Datastore $datastore -DiskStorageFormat thin
  

• questions more iPhone screen 6

  My iPhone 6 more the screen flashes, becomes insensitive and random apps open on their own.  I tried restarting it and a factory restore.  Always do the same thing.  Help?

  If we consider the steps you have taken, I suspect you have a defective screen / digitizer. If so, you need to take your iPhone at the Apple store for testing.

• Worry not that my account was hacked, or my stolen device found once more.

  I received an email from auto to Heathrow Airport has sent to my email from Apple yesterday, account while at the point I was in Asia. It's either my hacked account, or a long lost ipad/iphone/computer laptop is turned on.

  Do you know what email address to Apple I can contact to find the device that got connected and received the email from Heathrow Airport?

  Thank you.

  Hello, N.Dingo.

  It seems that you are affected by a message about a stolen iOS device. The following Knowledge Base article provides information and additional links regarding the protection of your account and your tracking device:

  If your iPhone, iPad or iPod touch is lost or stolen

  If you lose your iPhone, iPad or iPod touch or think it might be stolen, these steps may help you to find and protect your data.

  If find my iPhone is turned on, you can use it to find your device.	If find my iPhone isn't on, change your passwords and the report of the missing device.

  If you find my iPhone turned on your missing device

  You can use Find My iPhone to find your device and to take additional measures that can help you recover and protect your data.

  1. Login to icloud.com/find on a Mac or PC, or use the find my iPhone app on another iPhone, iPad or iPod touch.
  2. Find your device. Open find my iPhone, and then select a device to see its location on a map. If the device is nearby, you can have it play a sound to help you or someone nearby to find.
  3. Activate the Mode lost. Use the lost Mode, you can lock your device with a four-digit coderemotely, display a personalized message with your phone number on the lock screen of your missing device and keep track of the location of your device. If you have added maps to pay Apple to debit or credit, the ability to make payments using Apple pay on the device is suspended when you put your device in Mode lost.

  
  
• Report your lost or stolen to the local police unit. Law enforcement could ask the serial number of your device. Find the serial number of your device.
• Erase your device. To prevent anyone to access data on your missing device, you can erase it remotely. When you wipe your device, all of your information (including credit or debit to pay Apple) will be removed from the device, and you won't be able to find it using find my iPhone. After you delete a device, you cannot follow him. If you remove the device from your account after you delete it, locking Activation will be switched off. This allows someone else to activate and use your device.

If you use the sharing of family, any family member can help locate the device missing by another Member. Check your member of the family connect you to iCloud with their Apple ID, and you can find any device associated with this family sharing account.

What to do if your iOS device is turned off or offline?

If your missing device is turned off or offline, you can still implement this Mode lost, lockor remote wipe. The next time your device is online, these measures will take effect. If you remove the device from your account while it is offline, pending actions for the device will be cancelled.

How to disable or cancel lost Mode?

You can disable lost Mode by entering the access code on your device. Alternatively, you can disable the Mode lost on iCloud.com or the find my iPhone app.

If find my iPhone is not activated on your missing device

If you do not enable find my iPhone before your device has been lost or stolen, you can not use it to locate your device. However, you can use the following steps to help protect your data:

1. Change your password on Apple ID. By changing your Apple ID password, you can prevent anyone to access your iCloud data or using other services (such as iMessage or iTunes) from your missing device.
2. Change the passwords of other internet accounts on your device. This might include email, Facebook, or Twitter accounts.
3. Report your lost or stolen to the local police unit. Law enforcement could ask the serial number of your device. Find the serial number of your device.
4. Report your lost device to your mobile phone service provider. Your carrier can deactivate the account, preventing the use of data, texts and phone calls.

Find my iPhone is the only way that you can follow or locate a lost device or missing. If find my iPhone is not activated on your device until missing, there is no other service from Apple that can find, follow or flag, otherwise your device for you.

Thank you for reaching out to the communities of Apple Support.

Kind regards.