No dialog box is displayed when you try to master cd format before burning

Similar Questions

• Adobe PDF opens the dialog box "Save as" when you simply save an existing file

  Any time I hit "Ctrl + S", or go to "File - save" when you are working on an existing file, it opens the dialog window "save under. And that is not enough, the window "save under" is this new version which adds an extra step (because he wants to know if I also want to save the file in the cloud) and makes me also navigate the current folder and when I hit save it also opens another dialog asking me if I really want to replace the current file... How heavy one set of steps just to save a file that you opened to make a little change - we do not save money, just save.

  Please, can someone fix this? I think he was born in the current version, the last, so it could probably be a bug (the 'Save' option is set by mistake the method "save under") or a poor handlebars by developers.

  Adobe staff has tried to help me, asking me to "Run as Administrator". This does not solve the problem, and my post has since been ignored...

  Any help would be apprciated. Thank you

  Problem addressed and solved on this post:

  Re: Why Adobe PDF opens the dialog box "Save as" when you simply save a file

• "Missing operating system" is displayed when you try to start Windows 10

  I have been using bootcamp to access the 10 Windows for quite awhile. It was working perfectly until a member of the family installed a Windows Update, but the battery is dead during the update. Following this window would charge any. A black screen with a blinking cursor. After that, I went back on fairing and wrong used the partition synchronization tool. Now, Windows is in a worse state and the "Missing operating system" message when you try to get back in. In addition, the Mac startup disk no longer allows me to reboot the laptop using the bootcamp partition, as if the partition is not more detected. Disk utility simply shows a greyed out "Disk0s4."

  I spent a lot of time looking for a solution, but without success. Here are some of the things I've tried so far:

  I don't know if its of any importance but sudo fdisk e/dev/disk0 the following message is displayed:

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID >

  2: AF 1023 254 63 - 1023 254 63 [409640-174722176] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [175131816-1269536]

  * 4: 0 b 1023 254 63-1023 254 63 [244256768-244140032] Win95 FAT-32

  The partition Inspector displays this:

  Report for internal hard drive *.

  Current GPT partition table:

  # Start end LBA LBA Type

  1 40 409639 system EFI (FAT)

  2 409640 175131815 mac OS X HFS +.

  3 175131816 176401351 Mac OS X startup

  4 244256768 488396799 database

  Current MBR partition table:

  # A Type starting ending LBA LBA

  1 1 409639 ee EFI protection

  2 409640 175131815 af Mac OS X HFS +.

  3 175131816 176401351 ab Mac OS X startup

  4 * 244256768 488396799 0 b FAT32 (CHS)

  MBR content:

  Bootcode: unknown, but bootable

  LBA 40 partition:

  Startup code: no (Non-system disk message)

  File system: FAT32

  Filed under GPT partition 1, type system EFI (FAT)

  LBA 409640 partition:

  Startup code: no

  File system: HFS extended (HFS +)

  Filed under GPT partition 2, type Mac OS X HFS +.

  Classified in the MBR partition 2, type af Mac OS X HFS +.

  LBA 175131816 partition:

  Startup code: no

  File system: HFS extended (HFS +)

  Filed under GPT partition 3, type Mac OS X startup

  Classified in the MBR partition 3, type ab Mac OS X startup

  LBA 244256768 partition:

  Startup code: no

  File system: unknown

  Filed under GPT partition 4, type database

  Classified in the MBR partition 4, type 0 b FAT32 (CHS), active

  I also tried to use Windows, but without success startup repair.

  If there is no solution to this problem, all least, hope to be able to back up everything that was on the Windows partition.

  Thank you very much

  What is the year/model of your Mac? Please after the release of

  sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C

  This will show the first block of the Disk0s4.

• ADDRESS BOOK NOT BE DISPLAYED WHEN YOU TRY TO SEND E-MAIL,

  address book is not displayed when you send an email. Normally, when I send an email, I click on the front, and the address book appears on the left side of my screen.
  also, when I bring my address book, it takes half of the screen, when I click on the arrows to shrink the screen, it takes away the names and the addresses.help please!

  When you open a window of writing and click VIEW in the menu bar is framed verified contact?

• "documents.library - ms" is no longer work error message displayed when you try to access files via the file browser, why?

  I bought a computer window 8 in February of this year.  I use a lot of Word and Excel documents.  I don't know how I got hurt, but now I get the above error message.  Please someone know how to fix this?

  Hello

  I understand that you are getting the error documents. Library-ms' no longer works, when you try to access the files in the file Explorer.

  You can try the following method and check if that helps resolve the issue.

  Method 1: delete the document library.

  a. press the Windows key + E from the start screen.

  b. click on document library.

  c. Select Remove.

  d. click on Yes when it asks confirmation.

  Note: deleting of a library does not delete the contents of the included folders. However, you need to add or include your folders manually, if necessary.

  Method 2: you can follow the procedure to restore libraries.

  a. press the Windows key + E.

  b. right-click on the library.

  c. click on restore default library.

  You can check the link for more information.

  Libraries: Frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows-8/libraries-FAQ

  Libraries: How to add or delete a folder

  http://Windows.Microsoft.com/en-in/Windows-8/Add-folders-library

  If please get back to us and let us know if this helps to resolve the issue.

• Windows media player error "Windows Media Player has encountered a problem when you try to read the file" after burning CDs.

  Original title: "missing songs" in my windows media player then burn them on several cd :((

  I burned songs to several cd using my Windows media player to make different Cd, but after I returned to my library all the songs that I burned to the CD have disappeared, they are there, but they won't play it is as if they have been deleted, a window appears saying that windows media player has encountered a problem when you try to play the file. I did not notice this until after Cd burning a few I can't do more because if I keep going I'm not going to have more songs in my library! I don't know what to do im going crazy, it took me a long time to get all of these songs and now he disappeared! I have Windows 7 Ultimate is the version 12.0.7601.17514 hope that helps

  Hello
   
   
  They were playing before you burn CDs?
   
   
  Method 1:
  
  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
  Open the troubleshooter in the Windows Media Player library:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
  
  Method 2:
  
  This problem may be due to database corruption. You can delete the Windows Media Player database and check if the problem persists.

  Steps to clear the database of windows media player:

  a. exit Windows Media Player.
  b. Click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.
  c. Select all files in the folder and then click on Delete on the file menu.

  Note you don't have to remove the folders that are in this folder.

  d. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  a. exit Windows Media Player.

  b. Click Start, click Run, type % LOCALAPPDATA%\Microsoft and then click OK.

  c. Select the Media Player folder, and then click on Delete on the file menu.

  d. restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

• images dialog box is empty when you insert the memory card

  This is after you have inserted a card high capacity in the player, which hung the memory slot.  Now just insert a regular memory card, the dialog box appears, but there is nothing in it.

  Sorry if the info seems confused but maybe the
  answer is here somewhere.

  FWIW... There used a similar problem with a Sony memory
  Stick... the solution is to insert the stick into the drive and
  Restart the computer... somehow this would reset the
  stick.  I don't know if it will work for you.

  You may also check your AutoPlay settings...
  If you insert the card and go to... Start / my computer...
  and right-click on the drive letter for the location of in the map is...
  choose... Properties / AutoPlay tab...

  Choose... Mixed content...
  Tick... Select an action to perform
  On the left, click on the default button / apply / OK.

  Give it a try...

  It is possible that your media player is not compatible
  with the SDHC technology. The best is maybe to buy
  an external drive that is compatible SDHC or download
  Unit photo using a USB cable.

  Regarding the card... have regular SD, you tried to manually
  Download the pictures?

  If you connect the device to your PC via a USB cable, turn
  on the camera... then go to... Start / my computer... it may be
  listed as a drive letter...

  If_yes_right click on the drive letter and select... Explorer or
  Open... This should display the directory of the memory card.
  You can copy and paste or drag and drop the files from there to a
  folder on your hard drive.

  (The same steps work if you have a media player...
  When you go to... Start / computer... the media slots
  Drive should be listed under... "Removable disk" with a drive
  letter.)

  Finally... the AutoPlay Repair Wizard can be worth a try:

  Microsoft Autoplay Repair Wizard
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=c680a7b6-e8fa-45C4-A171-1b389cfacdad

• Windows Media Center is displayed when you try to open a zip file

  When I try to open a zip file to transfer files from my mp3 player to gamefaqs.com, windows media center opens upward, why is it happening? I'm just trying to get a saved game file to my friend, this usually never happen before, because the file zipped arise, now it displays an icon of the page with the logo of windows inside, I'm really confused and I need help to change this back to normal when the zip file only arise

  Go to http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/ and select ZIP and start the process to restore the file association ZIP and that should fix the problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Open with is displayed when you try to run installed programs

  After that infection by AV Defender and Symantec virus cleaned, I'm unable to run any of my programs installed.

  Hello

  Just in case there are persistent pieces of malware here is the method of complete elimination.
  .exe question difficulty in the next message.

  Try Mode safe mode with networking - repeatedly, press F8 that you start.

  The best two methods allow scanners to run and/or AV.exe out of the way or removing.

  1.
  CTRL SHIFT ESC - task manager OR right click on the taskbar - task manager

  Process tab - complete the process on AV. EXE and continue with the uninstall Guide.

  If necessary use start - computer or Windows Explorer to navigate to

  C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
  necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
  is installed.

  Right-click on it and rename it to ZZMbam.COM (or something different than now) and
  Double-click it, and then run it like this. You can rename it back later. Do the same with
  other programs according to the needs. Use this method to others as needed - NOT assume all
  a program deletes all or that it is no other malicious software.

  ---------------------------------------------------

  2.
  Another method is to use them:

  Use Process Explorer to "Suspend" the process will not stop

  Then use AutoRuns to delete the malicious program startup items.

  Now use UnLocker to delete the files in the malware.

  You may need to do a file at a time.

  Process Explorer - free
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  AutoRuns - free
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  UnLocker - free (do not install the adaware Ebay)
  http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtml

  AV.exe

  ==============================================

  The AV.exe malware goes by many names:
  
  XP Internet Security 2010, Antivirus 2010 Vista and Win 7 Antispyware 2010 are thugs
  antivirus, scams for you force to pay for them while they have no advantage at all.

  How to remove Vista Antivirus 2010 as well as the other varieties AV.exe.
  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

  RENAME this as necessary to allow them to perform: (use a different name with the extension .COM instead of .exe)
  
  It can be made repeatedly in Mode safe - F8 tap that you start, however, you should also
  Run them in regular Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
  Use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-- download="">

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing system
  files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Multiple copies of photo are displayed when you try to copy an image

  woring with images in Microsoft.

  Whe work with my files of photos, when I click on one, it will start to copy and sometimes I have 10 or more of the same image.  I can't get rid of all of them.  I have just keepgetting more and more the same images.

  Whe work with my files of photos, when I click on one, it will start to copy and sometimes I have 10 or more of the same image.  I can't get rid of all of them.  I have just keepgetting more and more the same images.

  =================================
  Are named copies: copy of xxxx.jpg?

  This happens usually when you have several choices
  keeping your Ctrl or Shift keys. Accidentally dragging
  the Group and then releasing the mouse button
  is what creates copies.

  It is easier if you have your mouse to single click...
  Then, you can select a file with a mouse and you
  don't have to click.

  Don't you click right/remove unwanted copies?

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Override dialog box "Save changes" when you exit an application

  Hello, I was wondering if it was possible to always close an app ignoring changes since System.exit (0) always pulls a dialog box to save the changes

  Override onSavePrompt() in your class

     protected boolean onSavePrompt()
     {
         return true;
     }
  

  Concerning

  Bika

• Windows security is displayed when you try to retrieve e-mail.

  My internet was cut and I use an e-mail through my IP address. I had for my windows mail. When they stop my internet I have lost all my e-mail through them. I had turned her back to do my email addresses, but now I can't send me by mail from windows. A windows security box appears and says

  Connect to pop.charter.net

  Check that the user name and the password are correct for your mail server.

  I tried everything and nothing works. I put in my email address and pw, but it does not work. What are exactly? Thanks for any help. I am running windows vista.

  Account: 'pop.charter.net', server: 'pop.charter.net', Protocol: POP3, server response: '-ERR a user name is REQUIRED ', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC91

  "mnmomoftwo" wrote in the new message: * e-mail address is removed from the privacy... *

  Yes, Charter is still my IP address.

  It's my new error message.

  Account: 'pop.charter.net', server: 'pop.charter.net', Protocol: POP3, server response: '-ERR user name or password.', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC92

  I always have the safety of pop-up windows. I pressed cancel and this is the error I got.

  ---------------

  Can connect you to your account with the username & password here:
  https://Web.Charter.NET/login/email_login.php

  Remember that passwords are case-sensitive.

  Best regards Steve. MS - MVP. MAIL. [DTS] UK. http://www.getsafeonline.org/

• Nothing is displayed when you try to view the Console in the Lab Manager 4

  Hello

  I just install and configure Lab Manager 4 on my vSphere and I'm ready to start working with virtual machine templates. I deployed a VM and it has started, but as soon as I try to display the console or 'Pop-up' the console nothing happen. Stay black and nothing works. I installed the ActiveX IE to ask me to but nothing changes.

  Can you help me with this?

  Thank you!

  You can give a try with firefox, if you face all the questions this time.

• Following error displayed when you try to send messages through bcc. They never leave the Outbox. Ideas?

  An unknown error has occurred. "Object", account: "pop.earthlink.net", server: 'smtpauth.earthlink.net', Protocol: SMTP, server response: ' 550 your message is not consistent with the standard RFC2822 ', Port: 587, secure (SSL): no, Server error: 550, error number: 0x800CCC69

  Did you survey the field empty?  If so, try to send the message with your own address in the field.

• Can not adjust the photos in the Live Photo Gallery, a red circle is displayed when you try to make the arrangement

  When the photo gallery has been upgraded to Live, this all took place. I liked better with the live portion.

  and I can't. All this happened with updates around CHRISTMAS, Please HELP

  You will find support for Windows Live Photo Gallery in this forum: http://windowslivehelp.com/forums.aspx?forumid=cafb0556-8959-49b9-afeb-635314aa02f3