Problems with A660 - 18 wireless

Similar Questions

• A30 - problem with intel pro Wireless 2200bg - wireless always turn off

  Hello.

  I have a problem with the wireless card Intel pci mini. I installed in the connector mini pci and connected the 2 wires. I also installed drivers and software to Intel. But the connection is always available. I changed the wireless switch located on the left side of my toshiba, but said software, the hardware radio switch is off.
  I reinstalled operaiting system XP Home, XP Pro, but all the time I have information that this switch is off.

  Thanks for any information

  Hello

  Please first check that when you the physical switch turn on wireless communication, you should also somewhere (probably near the switch) see an orange light.
  If this isn't the case, then there is something wrong.
  Did also attach you the antenna cables to the Wifi card?
  You use the Windows XP client or customer of Intel for wifi?

  BR

  Tom

• Problem with wag160N router wireless

  Hi all. Sorry for the typos etc I am new in the forum :-). Please, if the subject has moved to another subforum do it.

  So, here's the problem: last week, I bought the WAG160N wireless-N adsl2 + modem router (version 2) and yestreday I formatted my laptop 2, so today I decided to install a new one.

  I work 2 hours on it now, but still I can't find a solution. I started with the first cd, as required by the guide. Everything works well until the installation wizard step that attempts to connect to the router. At this point, he's looking for 5 minutes and then he said that he is not able to communicate with the router and wonder to check the connection again. I connected everything as it should (the gray wire of telephone jack to the socket of the router that says DSL, cable - ethernet - yellow of Gate 1 of the router ethernet for the laptop and then the AC/DC to the router and power.) I click next to the installation wizard, then he said to the power on the router... I do it and it checks then 5 minutes and again, he says that can't find it and tell me to double check and the story goes like this. I made 6 - 7 times but nothing. I also used the netwotk magical Wizard that was installed to fix the problem (because it recognizes that there is connection problem), but is not able to set in! What should I do? The ISP said that they don't sell Linksys products for their stores (I do not know the ISPS work on other countries, here they sell routers, adsl packs ect in their store) so they can't provide me with support. Can someone help me? Its the first time I use a linksys for me product and I don't know how to install it without the cd.

  I use windows vista pre sp2 on two laptops.

  I must also say that I have no problem with the ethernet connection the baudtec my ISP gave in the pack, that I bought when I activated my ADSL (2 years ago). IM connected with it now to view the topic.

  Sorry for my bad English and im sore right now that I can't think of what other info you might need, post and I will answer you.

  Thx for reading.

  Hello

  Connect your device directly to your pc via ethernet cable.

  Try to find the ip address of your device using the arp - a command

  Try to ping your router/adsl with address (192.168.1.1) ip of the device. u should get a response, if no response then in your pc check the LAN connection properties and enable DHCP.

  If you get always no response to ping the device, try and set an ip address in the range (192.168.1.1 or whatever your ip devices). Now, try to configure the device to cd Wizard help.

  Correct me if im wrong.

  Concerning

• Problem with network controller / wireless driver

  Hello, I have problems with my computer network controller. I can't connet to the Internet wireless or wired. In addition, two of my USB Ports do not work.

  My system is HP Pavilion G4 - 2235dx

  A6 - 4400M with Radeon AMD

  Windows 7 Professional

  The hardware ID

  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C & REV_01

  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C

  PCI\VEN_168C & DEV_0032 & CC_028000

  PCI\VEN_168C & DEV_0032 & CC_0280

  There are other issues such as:

  PCI device

  SM Bus controller

  USB controller

  When you open Device Manager and every thing under "Other devices" are not available, you will get the real picture. Please I need your help to make this work again.

  Thank you.                       David

  Hi, David:

  Here are links to the drivers you need:

  1. first install the amd chipset driver and restart. You only want to use the first file on the Web page.

  This will install the smbus and usb3 controllers.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  2. wireless card driver is the following:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229464&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118499_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  3 PCI device is the following:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103762-1&cc=us&DLC=en&LC=en&OS=4063&product=5275619&sw_lang=

• problem with mode Dell Wireless 1395 mini-map standby in windows xp

  I have problem with my computer laptop inspiron 1525 and the mini-map dell 1395 wireless.

  I installed windows vista for about 4 months, and there is no problem with the wireless.

  now, I have installed windows xp prof.  and it's the wireless card works fine. I put my laptop mode "Eve" and after a walk to the top. the wireless card absolutely does not work.

  I tried to uninstall and install the driver, I tried to run windows backup, I tried to do what I can, but no useful idea.

  Tip: When I try to check for the networks without wire around me, he say like this but in Arabic "could not verify the 65535 channel, verification will be repeated later.

  http://www5.0ZZ0.com/2008/07/02/17/850863907.jpg

  [url = http://www.0zz0.com] [img] http://www5.0zz0.com/2008/07/02/17/850863907.jpg [line] [url]

  any body help me befor replacing the xp on vista

  
  

• Problem with the Logitech Wireless Speaker Adapter

  Hello

  It's been days trying to get my computer, a Dell Inspiron 1721 on Vista, working with the Logitech Wireless Speaker Adapter. There are no instructions to come with the adapter because it was said to be very easy to use, that well is not for me...

  The adapter works via Bluetooth. I can connect to it, but then it doesn't work simply. The adapter is supposed to get a green light when it is synchronized with the computer, but he gets only a flashing green, then turns off. The adapter works as I have tried with a smartphone and it was so easy to do.

  Apparently something to do with A2DP, which does not have Vista. (I'm not an expert, I just repeat what I read on the forums...). If Yes, where can I find?

  Any help is welcome because I am completely lost on this one.

  Thanks adavance

  chikito11n

  There is no instructions to come with the adapter

  You can find the instructions on the Logitech support page. On the left side of this page is a link to the Getting Started Guide pdf which is the instructions.

  chikito11n

  I can connect to it, but then it doesn't work simply. The adapter is supposed to get a green light when it is synchronized with the computer, but he gets only a flashing green, then turns off.

  The flashing green light means it tries to connect and pair, so it can not connect, or it can be connected, but not being able to pair.

  First of all, make sure your laptop is equipped with a bluetooth adapter.

  Then, make sure you have the latest bluetooth driver. Go to the Inspiron 1721 downloads page. In the drop-down list, select Vista. Expand the network category. Find your bluetooth adapter driver and install it if it is newer than your current driver. (These drivers are from 2007, then you probably already have the most recent).

  As the Getting Started Guide Logitech says "refer to the documentation that came with your device for pairing instructions. Dell does not provide these instructions, but they are available on the Microsoft website. However, page this guy has the instructions and screenshots and it is easier to follow than Microsoft. It also explains how to determine whether or not you have a bluetooth adapter and how to configure it to connect to a bluetooth device, then explains how pair or sync in Vista.

  Note that if you enter an access code in the Bluetooth Setup Wizard, the Getting Started Guide says to enter 0000.

• Satellite L645 - problem with Internet connectivity Wireless 'limited access '.

  Hi all

  I recently bought a Satellite L645 laptop, however, there is a big problem. Whenever I connect to a wireless network, it will connect in a minute, he removes the connections and said "limited access", he could return by being connected but then back with limited access, so. However, when the laptop is connected to an ethernet internet cable works. I checked and the driver is updated, it is a defective material? software? is there something I can do? Help, please...

  Thank you.

  Hello

  Here the material is ok.
  You must disable for the Wlan to save energy.
  You can do it in 7 QL power management.
  In addition, go to-WLan card-> properties > Device Manager
  You will find a named tab to save energy. You should uncheck the option here that allows the computer turn off the Wlan device to save energy.

• Problems with Satellite C660 wireless

  My day 7 old Satellite C660 is constantly does not connect to wireless internet. It connects then stops loading web pages. I don't get no access or limited access note on the tray icon of system, but when I display the available networks it shows as connected with good resistance. I have 4 other wireless devices that runs through the same connection without problem. I checked the driver for my wireless card, and it is up to date.

  It drives me crazy and I think again the laptop to the store for a refund. Can anyone help?

  Thank you

  Steve

  Check if the BIOS update is available.
  Only thing you can do is update the BIOS in the hope that everything will be OK.
  I put t really know what else you can try.

  Did you perhaps tested WLAN connectivity by router s friend?

• problem with the Microsoft Wireless Optical Desktop 700 v2 keyboard

  I have a problem when I installed windows xp 64-bit operation. is that it is compatible with the version of xp 64-bit operating...

  Hello

  1. What is the exact problem you are facing with Microsoft Wireless Optical Desktop 700 v2 keyboard?

  Microsoft Wireless Optical Desktop 700 v2 keyboard is compatible with Windows 7 (64-bit).

  See the link below for more information.

  http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Hardware&p=Microsoft%20Wireless%20Optical%20Desktop%20700%20v2%20Keyboard&v=Microsoft&uid=M7A-00001&l=en-US&pf=1&pi=6&os=64-bit

  If you are facing problems of inadequacy of the response, then you can check the link below to fix the problem.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

• problem with printing on wireless network

  Hello. I have a HP psc 2410 all-in-one printer.

  I recently bought a modem router that has a function called "print server" and I decided to use this feature and print via wifi. I put it to the top, but with a problem. When I print something, for example, test page, instead of printing a page, it will print 'test page' on 3 pages (something like partial pages and the last = third page is printed without understanding) and then it freezes (the printer display says 'printing' and I have to cancel the job, otherwise it crashes and I have to reconnect it). I have this problem, not only in the test page but at least IE, office, PDF files. This concerns mainly the Wifi, since if I connect the printer directly to the PC or laptop via usb, it works quite well. also I tried printing with different laptops with wifi but no go. Here is more information that I have forget:

  (1) router is WPA - PSK encryption type.

  (2) there is no mac filtering or hide SSID passes.

  (3) a laptop and an iPad is connected to the router via wifi and a PC which is connected by a LAN cable.

  (4) the IP address of the printer, this is the same as the IP for the router settings page. (192.168.0.1)

  (5) I can't open the printer's internal web page by entering the IP address of the printer in the browser, since it is the same as the IP address of the router.

  (6) firewall on my computer (windows 7 32-bit) laptop is turned off and I don't use any anti-virus.

  (7) I tried PHYSICIAN analysis AND HP Print, but he says that the printer is OK.

  Thank you

  Leland

  EDIT: after studying for hours, I finally managed to get rid of the problem of gel. now, there is just one problem of this partial impression that happens by chance on wifi! I mean, it happens sometimes and sometimes not.

  any suggestions? I would really appreciate it

  The background is that this printer has no way to connect more than a straight USB connection.   In order to make wireless you have a device that will give him a network IP address.  The printer itself is unable to do this.

  The only way to get this printer on a network is to buy a SEPARATE USB print server.   Or, buy a router separate, as I said, that has a USB connection on the back which will have supported printers.

  You can not connect as you wish as it stands right now.

  However, call your ISP and have them set up IF their gateway device has a USB connection and really can support a printer.  That's their problem.

• Problems with Satellite A350 wireless

  I have a Satellite A350 running Windows 7 Professional 32 bit version.

  My wireless does not work. I just updated the driver and it changed the symbol of the connection to the network to connect to the local network bar wireless with a cross through it. I know that the wireless works in my house because I m using my iphone to write this now, I system restored it I have not decicied to wipe and reinstall windows it's about 1.5 years.

  The laptop is overheated and once do not know if that will cause the solder on components to melt if possible how to see if this has happened to myself. I don t want to waste money to take it to a tech when I could do it. Please help its annoying quite just going in circles
  Thank you

  After installation of the driver card wireless network appears correctly in the Device Manager?
  When you turn on the WLAN switch and use the key combination FN + F8 can activate WLAN card correctly?

• Problems with getting a wireless connection for my IPOD touch 32 GB

  Bought an IPOD itouch 32 gb last night.  When I connected the ipod, it is connected to my itunes account and copied my music for me.

  It is also recognized by the name of WI - FI for my wireless account.  Unfortunately, I can't remember or find my password for my wireless connection and so I am unable to connect my wireless to the ipod and establishing the ability to connect to the internet and get my email, etc.

  What is the best course of action for me now.  Should I drop my wireless connection and it restore?  Note: I have a laptop that connects fine, but he asks me a password... it goes directly to the wireless?

  Thank you!

  Go into your router configuration utility and in most cases, you will see the password. If the password is not in clear text, you can change it to something that you will remember. If you do this, you will need to change the settings on the laptop, too.

  To enter the router configuration utility, connect a computer with an ethernet cable. Open a browser such as Firefox or IE and type the IP address of the router in the address bar. For a Linksys router, you must type: 192.168.1.1 [press on enter]. Refer to the manual of your router for more details.

  MS - MVP - Elephant Boy computers - don't panic!

• Problem with the Microsoft Wireless Desktop 2000

  I have for 2011. and it works very well until recently. My mouse has stopped responding for a few seconds with the blue light flashing, then returns to work again, and it will be also passed at random.

  the keyboard works fine.

  I tried the sollutions below but no change/fix was filed:

  • Troubleshoot a wireless mouse that does not correctly
  • Failure of the resolution of the function Bluetooth mouse
  • Troubleshoot the incidents of the response to the mouse or wireless keyboard

  -J' have a wireless for the Wifi receiver. but it's far from the receiver box. It shouldn't be confliting with her.

  -My phone is too far, and with telephones connected by usb on the front panel cable, it should not be confliting with it also.

  -New and fresh out of the battery pack.

  Help, please. I don't know what to do.

  Hello

  Clean the mouse? Check the place where blue light emits. Also make sure that the battery
  terminals are clean and not compressed so that the batteries do not have good contact.

  The wireless desktop set must have a three year warranty.

  Wireless Desktop 2000 - support
  http://www.Microsoft.com/hardware/en-us/p/Wireless-Desktop-2000#support

  Microsoft Hardware support
  http://www.Microsoft.com/hardware/en-us/support

  Microsoft Hardware - contact us
  http://www.Microsoft.com/hardware/en-us/support/contact-us

  Microsoft Hardware Warranty Info.
  http://www.Microsoft.com/hardware/warranties.mspx

  The keyboard and mouse are delivered with 90 tech support of day of the 1st incident which would have
  start when you contact Microsoft at the number below.

  Hardware support of MS and warranty claims
  Tech Support 1-800-936-5700 OR 1-800-642-7676 for equipment Ms.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I have a problem with connecting to wireless devices.

  I replaced a wireless router for my home network... I can not connect one of my wireless devices. . How do I solve this problem?

  Better to look in the manual of the router.

  Currently, your computers only know the parameters of connection (SSID and password) of the OLD router and have not been informed of all the settings on the new...

  If the wireless router provided by your ISP, you could ask to walk through the process...

• Problem with the Microsoft wireless keyboard.

  G ' Day in the community.

  I have a new Microsoft wireless keyboard with lots of keys that I do not use Windows 8.1.

  Is it possible for me a key or keys to print/type a sentence like my email address so that I don't have a program

  the key it whenever this is necessary?

  I'm sorry that I don't have, I don't use such programs.  I can tell you that AHK is safe, many experts and pros, including those from Microsoft to use it.  I don't know why Norton he scored. He could score all the EXE.

  G ' Day Shawn,.

  I tried to re-download AHK and have borne fruit.  (Could be from another site)

  It is now current OK but I can't make a simple impression of my e-mail address. The program seems to be made for the work of very complex program.

  You can refer me to someone who may be able to help me. I think I'm very close.

  Thanks Brian