No ethernet or Wi - fi connection

Similar Questions

• Both ethernet and Wi - Fi connection has stopped working. When wireless stopped working,

  Both ethernet and Wi - Fi connection has stopped working.  When has stopped working wireless, disabled the wireless card and connected the laptop to the network with the Ethernet port.  Same problem, cannot access network. Market Diagnostics I get the message that indicates that the test has been able to network ping, but received no response.  When I try to ping the router I have 100% failure.  Other computers on the network are still working and able to connect to the internet.  The currency displays Manager Ethernet card and WiFi card works properly.

  Don't know what I had, but it was pretty nasty.  Did a restore of the system for a few weeks back, and when it restarted everything worked.

• Ethernet works, but wifi connection does not appear?

  I have a Pavilion G6. The wifi worked well until last Friday, when all of a sudden it would not work. He IS recovering near connections wifi, but not my house. IT just does not appear on the list available to all. Checked the internet modem and it works with the ethernet cable. I wonder what could the problem? It's really annoying me. In addition, wifi is available on the laptop of my roommate, but not on mine.

  Hello:

  Here is the link to the latest driver for your wireless card.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTypeId = 321957 & prodSeriesId = 3688868 & swItem = ob-102505-1 & mode = 3

  Powercycling the modem and the router is a good idea, but you need to know how to do. There is a specific order if you have a router and a separate modem.

  1. close all PC.

  2. turn off the Modem and the router.

  3. turn on the modem only.  Wait about 2 minutes.

  4. turn on the router. Wait about 2 minutes.

  If you have a modem/router combo, then you need not step 4.

  5. start the PC and see if you can connect.

  Paul

• If I am under food through my ethernet cable do I connect a power cord to the Extender?

  I wonder to implement a better more connected home.

  Apple routers do not support PoE (Power over Ethernet), you need to plan accordingly.

• How to share a Time Capsule airport directory (/ Data / media /) with an OPPO BDP - 103 Blu - Ray player with Ethernet (no Wi - Fi) connections?

  I have an OPPO BDP - 103 Blu - Ray player connected to my LAN via ethernet cable.  I also have an airport Time Capsule (APTC) connected by ethernet to my local network cable.

  In addition to the use of PACT as a backup Time Machine for my MacBook, I have a few movies and photos in the directory/data/media /.  What should I do so that the law of the APTC as a media server to serve/data/Media/and the files in the hierarchy of files in this directory to the BDP-103?  I don't have a wireless adapter for the BDP-103.

  Note that I use OS X El Capitan on my MacBook Pro, but I don't want to get involved them in this.  I want to just serve you directly the files on CLTS CLTS.

  You can't do it unless the Blu - Ray player is a complete multimedia player.

  Apple have no extension of media in a TC... No... nothing... zero... Nothingness... elodie... not a thing.

  BTW, Apple do not support DLNA who need of most TV/media players... so they never get to add it in the future either.

  To play media files on a TC you can use a WD TV live... because it's a media player... and he can read raw files... not only DLNA used media.

  What Apple is nothing without iTunes.

• "MB Ethernet Slave Demon.vi" connection lost when opening a windows dialog box in my application

  Hello everyone,

  I am currently working on a LabVIEW application that communicates with a PLC using a Modbus Protocol (with an ethernet cable). The PLC is the master and the PC is the slave.

  The code is based on the Modbus of LabVIEW examples: "MB Ethernet example Master.vi, MB Ethernet example Slave.vi and MB Ethernet slave Demon.vi. It is not the first time I use it.

  But I recently discovered a problem. In my application, I have a pop-up with a button that opens a windows dialog box to select a result file.

  When the windows dialog box opens, the "MB Ethernet Slave Demon.vi" crashes (I put a meter inside to see what happened and it stops at the moment opens the dialog box), then when I close the dialog box, the counter continues to count, the connection ID is empty, and the number of the demon slave VI connection resets to 0. When communication is re-established between the PC and PLC (like 10 seconds after the closure of the dialog box), the number of connection go to 1 and table of login ID is no longer empty.

  Otherwise, the communication works very well. But not when the dialog box opens and is a significant problem for me because the user must be able to open results file during production that needs the Modbus communication at work because it's the controller who gives orders the computer to run the production cycle.

  Thanks in advance for your help.

  If you think that the problem is inside the library NI Modbus (old), why don't you use the most recent which is available on the network of tools? Link is here: https://decibel.ni.com/content/docs/DOC-30140

  Looking into some of the screws in the library, she uses methods of Server VI as "Run a VI" that will perform the loop of the root, as it crashes while the file dialog is open. I suspect that the new version of the library is not the problem.

• HP 15-fo18dx: sudden ethernet wireless is not connecting on hp 15 fo18dx

  Hi, my daughters hp 15 suddenly ceased to connect to internet. At worked earlier in the day at the school, shut down normally and now only connects to the wifi at home with limited connection.

  Have you tried stop/restart x 3

  Reset the modem/router x 2

  Ethernet cable

  diagnosis of HP

  None has solved the problem. Download drivers on realtek usb wifi and lan, and will try uninstall/reinstall tonight.

  I noticed some drivers that I download are dated 15/12/2015, these are perhaps the cause or are these patches for known issues with Win 10?

  Any help/thoughts appreciated...

  Hi there @jpk1291,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff.
  I understand that you have a problem with the WiFi connention. I'll be happy to help you.

  I know you have done a few things fo in troubleshooting wireless network and Internet (10 of Windows) . Please follow step by step because sometimes it works only if done in the correct order.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!
  If you need more assistance let me know and I will gladly do whatever I can to help. Thank you.

• New installation of Win XP does not recognize an ethernet or wifi Internet connection.

  I'm reinstalling an old copy of Windows XP Home edition on a partition on my MacBook Pro and for some reason it gives me the ability to connect to the internet. I can connect with the side the laptop mac, both wireless and via ethernet, but when I boot on Windows, it is not even an option to connect to wireless networks, and he simply ignores the ethernet connection. I tried following a variety of instructions on the web, but no instructions corresponds to what I see on my end. Has anyone else encountered something like this before and know how to fix?

  You must install the network drivers for the Windows operating system. Windows doesn't know how to talk to your devices until you do.

• Ethernet and is showing connected. Network settings of the Troubleshoot Help?

  a xp and previously no problem on this computer, after changing the settings or implement?, in some way, I lost the ethernet connection. It shows connected but when trying to connect to internet, it fails. any suggestions? THX

  Hello

  Maybe this can help, http://www.ezlan.net/debug.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• extention of the Xbox 360 to the ethernet cable crossover direct connection to pc computer

  I have a motorola sb5101 cable modem connected to the computer via usb. I am trying to connect my xbox 360 with a direct crossover ethernet cable to the Ethernet port on the computer.  nothing works I tried a lot of things. any suggestions? I connected the xbox directly on the modem and the xbox live Guide.  I can't get the xbox to work like a slave to the pc - network does not.

  help please

  gougou

  Hello

  ·          This all the steps you've tried?

  ·          Check after you manually assign IP address?

  Step 1: Try with a different cable.

  See also http://windows.microsoft.com/en-US/windows-vista/Use-a-Windows-Media-Center-Extender-device

  http://www.Microsoft.com/Windows/Windows-Media-Center/learn-more/Extenders/tutorials/Extenders-Xbox-config.aspx

• LAN/Ethernet and wireless: can connect to networks, but shows "no Internet access.

  My workplace has cable/Ethernet and Wi - Fi.  I'm working on a laptop, plug it into a dock where my ethernet cable is connected.  Lately, I've been the startup object and the network will connect automatically (by default to connect to the local network, not for the wireless) but I get the point of the triangle/yellow exclamation on my network icon and displays "no Internet access.  Even if I get this warning message /, in fact, I can access the internet, but I can't access resources online through a program installed (such as, to access to the / insertion of a photo online by word or update a SharePoint Outlook calendar).

  In the past, I could connect wirelessly and work around this problem.  However, now my wireless connection does the same thing: it will connect, it displays the warning "no access Internet, I can access the internet, but not another program."

  I ran the resolution of problems and it does not identify the problem.  I've updated drivers, disconnected and reconnected networks - nothing seems to work.  Any ideas?

  Given that you encounter this work to your work network you really need to get your business COMPUTER Department to come and watch. As far as we know, there may be certain restrictions checked in your network permissions that must not checked. There is so much that can happen it is impossible to diagnose on an online forum.

• Ethernet LAN identified and connected on HP pavilion M6 1002 - tx Win7 home premium 64-bit

  Model: HP pavilion m6 1002-tx

  OS: Windows 7 Home Premium 64-bit

  I bought a HP pavilion m6 1002-tx win7 Home Premium 64 - bit two weeks back. (November 30, 2012)

  I am not able to connect my ethernet lan because the system loses the connection just as I connect to the adapter. Its continually go... like... ID disconnected... identify... disconnected... and so on.

  It is a Realtek PCIe GBE family controller (Version: 7.54.309.2012). I checked the Ethernet driver lan on the hp support site and it is even installed on my system.

  Please help me solve this problem.

  Check if the connection is really good. Other laptops are able to use this ethernet cable? Try to change the speed and duplex to 10/semester, it will be useful.

• Ethernet or wireless is connected but no Internet access

  My laptop OS is Win 7 64 bit. My laptop able to connect to the internet, but it suddenly can't connect to the internet via the Ethernet or wireless. I tried to system restore and it worked fine, but after I stopped, the problem was took place again. I don't know if because of the McAfee antivirus or window updates because it has some errors (to McAfee) and Skype has been updated before I had this problem (no internet access).

  McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

• Need to connect the network adapter when the ethernet cable is not connected

  Hi all and thanks for reading.  I'm new to the both VMWare Fusion and new on Mac.  I have a new MacBook Pro, I bought a month ago.

  I have software that works only on PC and its license server is linked to the mac address of the NETWORK card.  I am implemented on bridged network mode I use the multiplicity to link the Virtual PC to my other PC and it seems the network mode that works best for this.

  I've set up to work with the virtual address of the NIC card and everything works fine.  The problem comes when I'm traveling and my Mac isn't difficult, connected to an ethernet connection.  When I start the merger, told me that 'the network bridge on/dev/vmnet0 unit does not work"and that she didn't connect the device virtual ethernet0.  Under the terms of the merger, I get this error whenever I try to force the card /virtual machine/network/will connect the network adapter.

  When I'm traveling or not hung, I need to get the virtual running NETWORK card so my license server will take place so that I can run my software.  Any ideas?  Any help is most appreciated!

  Thank you

  Mark

  Change the type of the bridged network to NAT and then start the virtual machine.

• Spectrum 360: Cable ethernet for spectrum 360 connection?

  Nobody knows what the best approach for wired ethernet is on these laptops?  I did not know that they do not have an ethernet jack, my son is off to College with a spectrum of 360.  Looks like they recommend an adapter, but I don't know if it's via the HDMI or USB? And then, what size is the USB?

  Any help would be appreciated!

  Jeff

  USB 3.0 and USB 2.0 are the same size and are backward compatible.

  USB 3.0 ports are blue or have at least the symbol (super speed)