No Internet access Windows 8 with a Modem ZTE

Similar Questions

• questions: what I have to have internet access to work with the ambient light and photoshop or is the program downloaded on my computer while I did not need to be online?

  I live in a rural area that does not have consistent internet access.  questions: what I have to have internet access to work with the ambient light and photoshop or is the program downloaded on my computer while I did not need to be online?

  That is, the work programme is located in my computer or is it online?

  Thank you.

  adobe (and perpetual license) subscription programs are installed on your computer.  You need to be online for installation and activation, and then you must be online periodically thereafter.

  with a monthly subscription, one time every 30 days is necessary to maintain your activation.  for an annual subscription, all 91 days once is enough.  These checks online to check your license status.

• unidentified network - no internet access windows 7

  Hi, I have a pavilion dv6 - windows 7 Home premium. everything was working fine until recently, but since this morning my wireless connection is coming as 'public network' with an error message "schooner - no internet access network. its connected to the router as usual with strong signals and other wireless computers work fine. I have not change whatsoever on my laptop but now I tried all the solutions mentioned on the internet. reboot/uninstall-install the drivers / updated drivers/called HP support/safemode network but nothing has worked so far. I use AVG Anti-virus if it's important. other ideas would be very appreciated. and how can I change a public network at my home netowrk in this case?

  Thank you

  Hello

  It may be an idea to set up a static IP address to see if it will connect you.

  Open windows control panel and open network and sharing Center.  Click on change settings card and in the next window, right click on your wireless connection, and then select Properties.  Left click on Internet Protocol Version 4 (TCP/IPv4) to highlight (click on the wording and not with the beat box) and then click the properties button.  Click the radio button next to "use IP address, then enter the following values. following

  IP 192.168.1.110

  Subnet mask 255.255.255.0

  Default gateway 192.168.1.1

  In addition, assign the following DNS server address

  Preferred DNS 208.67.222.222 Server (these belong to OpenDNS)

  Auxiliary DNS 208.67.220.220 Server

  After entering these values, don't forget to click OK for each open window, before restarting the laptop.

  Kind regards

  DP - K

• Laptop HP 15-r029wm: limited Internet access Windows 10

  Installed Windows 10 8.1 soundcards home last week.  Connected to the Internet for a few days and now I get the "limited access - IPv4 not configured correctly.  I'm not computer savy depth, but how it is fixed? How should we re - register (or make you re-enter) IPv4?   Internet works on the rest of the House.

  I don't know what build windows 10, I received (automatic download on computer).  I have a laptop HP-15 r029wm using a Qualcomm-Atheros 802.11 AR9485 WiFi adapter b/g/n.  An operating system to 64-bit.

  I looked everywhere and nothing has helped.  Microsoft does not have the question.   If you have a solution that I'd love to know about it.

  Your network adapter does not have in the right IP address to connect to the network.

  Bottom left, right click on the Start button and select network connections.

  Right-click your wireless adapter and select Properties.

  Click on where it says Internet Protocol Version 4, and then click Properties.

  Make sure that the IP address get and get the DNS server is automatically checked. If she only has not this. If you are still having problems, click the wireless at the lower right of the screen, click on the name of your wireless network and select Disconnect. Reset your modem and the wireless router and reconnect.

• Access Windows Mail with Vista OS _

  How can I access email Windows that is running on a Vista operating system from another computer, more specifically from my computer at home (this one) that is running Windows 7.

  I was told MS that Windows 7 will not support Windows Mail, I prefer (although she was responsible here) and that only Windows Live Mail can be performed on-site.  Is this really the case?

  Many users never bother with e-mail software such as Windows Mail, preferring to use webmail online.

  The problem is when clicking on links in e-mail, on web pages, Windows launches the e-mail program default, which is Windows mail in Vista. There are only a few webmail providers who have developed a programme of assistance that will allow their webmail become the default of Windows.

   

  Gary van, Microsoft MVP (Mail)
  ------------------------------------------------------

  "leebc" wrote in the new message: * e-mail address is removed from the privacy... *

  Well Ok, why do I still need a Windows Mail account, in this case?  Other than this is the default mail program in Internet Explorer, and I use it for this.

  Gary van, MVP (Mail)

• setting up my VM PC for Internet access

  HI -.

  I just downloaded the latest demo version of VMware Fusion, enabled with the serial number temporary supplied and installed XP Professional. The platform is a relatively new Mac Mini running the current operating system. My Internet access is through a DSL modem/router which requires a system of client and enter a serial number from 10 numbers as a key.

  I don't seem to have access to the Internet on my PC of VM. I'm pretty new to do something meaningful on Windows; can someone tell me how to configure it to access the Internet? I just need to be headed in the right direction; I am sure that I have all the configuration information that I need.

  Thank you.

  mzimmers wrote:

  upgrading to SP2, and SP3 instead of directly to SP3.

  I would never install SP2 on a clean install if SP3 was the ultimate goal that it is a waste of time and I will not talk about other things.

  You should look into creating a slipstreamed SP3 for future facilities .iso image.

  Take a look at: Slipstreaming Windows XP with Service Pack 3 (SP3)

  Do you want to get this test anyway? I don't know what he's going to tell us now, because I don't have a virtual machine without Internet access.

  No, it is not necessary since you have Internet connectivity in Windows XP.

• How can I remove duplicate internet access

  I have 3 showing internet access to connect with. How to remove access points double? I have a PC and two laptops and all of us don't seem to be on different access points. When you try to log on, it shows only one, where we are all different. I don't know what to do. We are all running Windows 7 and must be on the same. Can anyone help?

  Hello Winweaver,

  Thanks for posting your question on the forum of the Microsoft community.

  I understand you are trying to remove the duplicate network connections.

  I suggest you try using the steps in this Microsoft support article and check if it helps.
  Reference:
  Delete a network connection in Windows 7 and Windows Server 2008 R2
  http://TechNet.Microsoft.com/en-us/library/gg252588 (v = ws.10) .aspx

  If it does not help, then please refer to Nick520 wrote on January 8, 2011 and check.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/how-can-i-remove-old-network-connections/679baf9b-0303-4B2C-AF51-92981477a43a

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• I need to edit PDFs to stand alone (no internet access) to laptop.

  I need to edit PDFs to stand alone (no internet access) for laptop with Windows 7 Pro. Is the appropriate product of Adobe Acrobat DC for me?

  Yes.

  If only, you will have access to the internet during installation, you will need to purchase acrobat dc, Plans and prices | Adobe Acrobat DC

  If you will be able to connect to internet during installation, and at least once a month, you can buy a subscription form usage.

• Windows XP does not detect any internet at all despite the computer with the modem to work.

  I recently installed Windows XP Professional on my new iMac via bootcamp.  While Windows itself works fine, it won't connect to internet at all.  Despite being connected to a modem ADSL via a Ethernet cable, and also have wireless internet, Windows does not detect any signal.  On the internet in the Control Panel, all connections page that appears is "1394 connection" under the heading "LAN or Internet high speed."  I tried several times to put in place a new internet connection through the Setup Wizard and everytime, no internet is detected.

  I know that the modem works because all the other computers in my house are fine online, including on the side of Mac of the iMac.  If anyone has an idea as to how I should resolve this problem, your help would be greatly appreciated!

  Thank you

  Daniel

  Moreover, these are things I've already tried:

  I've tried to manually and automatically set up an internet connection
  I spoke with my ISP, the modem works fine
  I have re-partitioned the hard drive and reinstalled XP

  The "1394 connection" is the IEEE 1394 (FireWire) from your computer.  There should be cable system and under the heading wireless connections "LAN or Internet high speed."   There is no need to run the Network Setup Wizard or set up a new connection.

  Open the Device Manager (Start > run > devmgmt.msc ) and go to the network adapters section.  You may need to install the drivers for them.

• I'm unable to access my computer (windows 8) with my microsoft account. The password works for the connection to outlook on the internet, but not the computer.

  Original title: connection problem

  I'm unable to access my computer (windows 8) with my microsoft account. The password works for the connection to outlook on the internet, but not the computer.

  The message I get when trying to connect is simply that I cannot connect you at this time and that I should follow a link to reset the password - what I've done without result. The computer is connected to the internet.

  Hello

  Thanks for posting your query on the Microsoft Community.

  With the publication of the description, I understand that you are unable to access your computer using Microsoft password account on the machine Windows 8. I will certainly help you get this problem.

  I would be grateful if you could help me with more information:

  1. Since when you are facing this problem?

  2. What is the exact error you receive by accessing the computer?

  I would say to you follow the suggestions provided by Cliff_N responded on 7 December 2012 in the below thread Microsoft:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-security/why-cant-i-sign-into-Windows-8-with-my-Microsoft/7662ea57-c321-4bfe-84e9-fc9ebb87a44b?TM=1355519512755#_self

  Important information: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Note: When updating, the applications you have installed Web sites and DVDS is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.

  For more information, you can consult the Microsoft article.

  What to do if you forget your Windows password

  http://Windows.Microsoft.com/en-us/Windows/what-do-forget-Windows-password#1TC=Windows-8

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• loss of internet connection on windows 7 pro 64. Says connected but no internet access with yellow exclamation point! Help, please!

  I keep losing internet connection, I have windows 7 and every time I connect it to the wireless internet works for 5 minutes, then a little ytellow icon pop up and say its connected without internet access. Its happened to me before and recently started happening to my cpu. I did a FRESH install of windows to see if it can help, but it didn't. IM literally on the point of throwing my processor through the cause of wall, I can't find a solution to this anywhere. Whenever the yellow icon pops up that I have troubleshoot and it indicates the default gateway was unavailable and that fixed it, then I have internet again for about 2-5 minutes and it does the same thing. Ive never had this problem on my cpu and the network has not been changed or anything, so I don't know what that the * could cause this. I literally wiped everything on my cpu and then do a system image to restore too. Ive been messing around with the registry, deletion of things here and there missions that I read, but only thing that happens is losing internet alltogether and must restore from system image. I'm really running out of ideas. Help, please. I have an adapter netgear wn311b wireless pci-express with the latest drivers.

  to detect new updates for network based components on intel:

  http://www.Intel.com/p/en_US/support/detect/?IID=subhdr+dnlds_detect

  You will be asked to download and install active x components.

  After the installation of the small file, click on the "expand all" button

  You can choose to update your components wired network if necessary.

  then re-install your wireless network management software.

  assuming that your wireless network is intact (connected, permits), you can surf the net.

  If the problem persists, troubleshoot more away:

  When the computer is turned off, set again you netgear pci wireless adapter.

  set of antenna for optimal orientation.

  Check if your computer is authorized by your wireless router.

  check the signal strength of your wireless router and the wireless pci adapter.

• How to access Windows 8 PC on the Internet with remote desktop connection?

  Hello

  Can someone tell me how to access Windows 8 PC on the Internet with remote desktop connection?

  I'm good with the software and I have used many Microsoft software since the 1980s. So I like Microsoft products, but since they have outsourced their tech support, you can't support quality even if you pay for it. I followed all the instructions in the Windows 8 will help about DRC setting screens, but I can't connect unless I'm on the same home network. Here are the details:

  I have a desktop PC with Windows 8 Pro and I have authorized the DRC. I tried two settings in system properties:

  1. Allow connections to this computer remotely.
  2. That allow the connection of computers running Office remotely with authentication NLA.

  I also turned on both private and Public Windows Firewall settings > allow an App or feature through Windows Firewall.

  I have installation then DRC to my laptop with Windows 8 (standard edition, not the Pro version). I have a DRC using the full name of the computer and other DRC using the static IP address for my ISP Desktop connection.

  I use the user account administrator Windows for connections of DRC of the laptop.

  I cannot get this to work on the Internet from a location outside my house with another ISP connection. The only way it works if I'm uncomfortable with the laptop using the same network home.

  I called Dell tech support and it is always useless and just a more aggravating waste of an hour to talk to their support of technique outsourced in India (who barely even understand English) and then they hang up the phone as it was supposed to be disconnected. I also called Microsoft support and lost more than an hour to speak to their outsourced tech support in the Philippines (and as support of the India, they hang up or 'disconnect' when they cannot answer your question and they go account learn you more about Windows while they do). U.S. tech companies use AMERICANS more for their technical support so their customers can get people who actually care about doing a good job and can actually understand English?

  So if someone who knows using Windows 8 for DRC on the Internet has some tips, then it would be greatly appreciated.

  Thank you!!

  P.S. If anyone is offended by my comments about the ugly, incompetent, stupid providing "technical support" in India or the Philippines - Nevermind! You go ahead and waste hours of your time talking to some Morón in these countries, who barely understands English and then 'disconnects' the call when they know that you realize that they are clueless and have all the answers.

  Take a look at no - IP.com or dyndns.com, and then use your host.domain:3389 of no.-ip/dynDNS or run RelaVNc SErver that is running on port 5900 by default.  Server options allow you to change the port as well if necessary.

• Removed vista from my computer and downloaded windows xp but now I have no internet access! I downloaded realtek but the computer has not done something with it!

  Downloaded realtk 8139/810 x using a flash drive, but although we see the file and clicked set up it does not work.  How can I get internet access again?  I seem to not have an ethernet.

  Hi Lorraine,.

  1. where did you downloaded the drivers from?

  2. what exactly happens when you try to run the set-up file? You receive messages or error codes?

  You can try to re - download the latest version of the network drivers on the manufacturer's Web site and check.

  Support for Realtek

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=6&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  Realtek FAQ

  You can also try to update the latest version of the chipset drivers and check.

  Contact your motherboard manufacturer or the manufacturer of the chipset to get good support driver.

  How to manage devices in Windows XP

• problem with Internet connection sharing, error: connection ad - hoc has "no internet access" on the cell phone of the customer

  Original title: problem with Internet connection sharing

  my laptop running on Windows Vista Home Premium SP2 (this one has access to the internet by using the dial-up modem and will to act as a sharer of internet connection or as a host) and the client computer runs on Windows 7 Starter

  in a first step, I try internet connection sharing, I've set up an ad hoc network and I just changed my setting modem dial-up on the sharing tab, of course what I change, it of 'Allow an other network users to connect through this computer internet connection' and choose the on Home Networking connection wireless network connection , then my mobile client to connect to a special that I created and portable client connected to the internet via ICS
  then the problem came when I restart my laptop. When I tried to use ICS once again, my customer laptop really takes a long time to connect, he continues saying 'identification' side host and client. and after that "identify" is complete, it says ad - hoc connection, I create has "no network".
  so, I'm a person answer in this forum
  ' Obtain an IP address automatically is the wrong setting on the Ethernet connection. "  To return to the sharing tab and unshare the wireless connection.  Close all windows network, and then open them and re - share the wireless connection.  Who must configure IPv4 for the Ethernet connection properties for:

  IP address: 192.168.0.1
  Subnet mask: 255.255.255.0
  Default gateway: no
  "DNS server: none.

  I put this on my laptop of the host, and and I put the IP address on my laptop customer in 192.168.0.2 with the same default gateway as my portable computer host IP

  and made some progress in this case, when I try to connect host and the client is no longer to 'identify' phase, immediately connected laptop both but my mobile client can not connect to the internet and displays "No Internet access" on the ad hoc network, I have create

  I tried a lot of things but always completed my mobile client can not connect to the internet and displays the message "no Internet access.

  What makes me confuse is first, I try to share the internet connection everything works like a charm, I set up an ad hoc network, and then change the setting on my modem dial-up so he can share the internet connection, and voila, computer laptop client connected to the internet. I change even not all IP settings

  But why after I restart my PC, this problem comes...

  someone knows how to help me with this problem?

  Hey, Mimbs,

  You can try the similar thread to the next with a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/no-Internet-access-in-the-client-machine-when/77312e09-4385-41FA-A420-0c42be58e4e3

  Also for reference:

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

• Computer with Vista unable to connect to the internet through two computers with Windows 7.

  Dear engineers,

  In our House, we have two new computers Windows 7 connect to Wired internet access.  Our friend came in hoping to play some MMO games with us on our connection (it has windows vista).  When we hung everything upward, by linking to our modem, his computer was visible on my husbands computer, but was visible on mine as a media device.  He could see the two computers, but could not get an internet connection and no viable ping.  We checked the network map and he showed my computer with one? related to my husband then connected to the internet.  Inside, there was an announcement indicating that the following devices are not displayed in the network map.  under of course was listed both our friends media device and the computer device.  I searched Control Panel and gave access to anyone on the login to my husbands system as long as me.  What happens if nothing else can I try to have its system you can connect to our internet?

  Thank you for your attention,

  Cerisea

  Hello

  If a computer is not properly visible it generally means that sharing is not set correctly to match your system.

  You must also set your computers with the computer account of the friend as a user on your computer.

  Everyone does not mean everyone wishing to connect.

  If the accounts are presented only for John, Jill and Jack, setting in the folder with all permissions saves the effort of definition permission separately for John, Jill and Jack.

  Everyone isn't everyone group, only John, Jill and Jack.

  In general.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET