No internet when VPN is raised

Similar Questions

• Connect to fails Internet when VPN is in place

  Hello

  Can someone please help me to identify the causes of this. I have configured the VPN tunnel successfully, but I'm not able to browse the internet from LAN. I use the cisco 877 router. ACL 105 controls VPN traffic. But according to the theory, other traffic must go through the default gateway, but this isn't the case. Can you please help me fix this problem.

  Building configuration...

  Current configuration: 2344 bytes
  !
  version 12.4
  no service button
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  hostname Ringwood
  !
  boot-start-marker
  boot-end-marker

  !
  No aaa new-model
  clock timezone WAS 10
  summer time clock AEDST recurring last Sun Oct 02:00 last Sun Mar 02:00
  !
  !
  dot11 syslog
  IP cef
  !
  !
  DHCP IP use connected vrf
  DHCP excluded-address IP 192.168.25.1 192.168.25.50
  !
  IP dhcp RINGWOOD pool
  network 192.168.25.0 255.255.255.0
  Update dns
  192.168.0.10 DNS server 139.130.4.4
  router by default - 192.168.25.1
  Rental 7
  update of arp
  !
  !
  name of the IP-server 139.130.4.4
  name of the IP-server 203.50.2.71
  inspect the name firewall tcp IP
  inspect the name IP firewall udp
  inspect the name IP firewall rtsp
  !
  Authenticated MultiLink bundle-name Panel
  !
  !
  !
  !
  crypto ISAKMP policy 2
  BA aes 256
  md5 hash
  preshared authentication
  Group 2
  encryption isakmp D19 * b & 5901 - key) @ address 0.0.0.0
  !
  !
  Crypto ipsec transform-set esp ENDLESS - aes 256 esp-md5-hmac
  !
  map Ringwood_Lynbrook 1 ipsec-isakmp crypto

  defined peer 0.0.0.0
  transformation-ENDLESS game
  match address 105
  !
  Archives
  The config log
  hidekeys
  !
  !
  !
  !
  !
  ATM0 interface
  no ip address
  No atm ilmi-keepalive
  PVC 8/35
  aal5mux encapsulation ppp Dialer
  Dialer pool-member 1
  !
  DSL-automatic operation mode
  !
  interface FastEthernet0
  !
  interface FastEthernet1
  !
  interface FastEthernet2
  !
  interface FastEthernet3
  !
  interface Vlan1
  IP 192.168.25.1 255.255.255.0
  IP helper 192.168.25.1
  IP nat inside
  inspect the IP firewall
  IP virtual-reassembly
  !
  interface Dialer0
  MTU 1460
  the negotiated IP address
  NAT outside IP
  IP virtual-reassembly
  encapsulation ppp
  Dialer pool 1
  Dialer-Group 1
  No cdp enable
  Authentication callin PPP chap Protocol
  PPP chap hostname theend10 @.
  password PPP chap 0 2133
  card crypto Ringwood_Lynbrook
  !
  IP forward-Protocol ND
  IP route 0.0.0.0 0.0.0.0 Dialer0
  !
  !
  no ip address of the http server
  no ip http secure server
  The dns server IP
  !
  interface Vlan1 source journaling
  access-list 105 allow ip 192.168.25.0 0.0.0.255 192.168.0.0 0.0.0.255
  Dialer-list 1 ip protocol allow
  !
  !
  !
  !
  control plan
  !
  !
  Line con 0
  no activation of the modem
  line to 0
  line vty 0 4
  password g00se
  opening of session
  !
  max-task-time 5000 Planner
  NTP 128.250.36.2 Server
  end

  Thank you

  Siva.

  You shouldn't have a problem with that.

  When you add controls and try to access Internet from 192.168.25.0/24 where the traffic is going?

  Check "sh ip nat trans" to check if there is a translation that is built for your machine and do a traceroute to see how traffic.

  The new configuration should not be a problem, if problems persist, please report it again.

  Federico.

• Users cannot access internet when connected VPN

  Hello

  I have users located outside the United States than VPN for our system. Once connected, they get an address from the pool designated for them. However, they are unable to connect to internet when connected. I don't want to use split-mining because some of the sites they connect to will not work properly because their address IP is located outside the United States. I tried both without client anyconnect and vpn client version

  Hi, this link might help you:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml

  HTH

  Ingo

• Why do I get a message saying that I am not connected to the Internet when you try to install IOS 9.3?

  WWhy I get a message saying that I am not connected to the Internet when you try to install IOS 9.3?

  It is a known issue and Apple is working on a fix for 9.3. This article summarizes some of the problems with the current version.

  http://osxdaily.com/2016/03/25/Troubleshooting-iOS-9-3-update-problems/

• Unable to connect to the Internet when downloading the iOS 9.3

  I'm trying to insta 9.3 in my iPad 3G. Repeat me "CAN check the download because the Internet is not connected". However, I could connect to the internet when you use the ema, Facebook and games. Reset did not help.  Any suggestions besides connect the iPad to the computer?

  Please notify.

  Thank you

  Leigh-Anne

  iOS 9.3 was pulled due to a few bugs.

  You have to wait for further notice when Apple launches a new version of iOS.

• 9.3 OS does not complete on my iPad 2 get message that device is not connected to the Internet, when it exists, a solution?

  WWhen updated my iPad 2 with OS 9.3, when I finally install, during the verification step, message, is that the device is not connected to the Internet when connected. Anyone else have the problem? All solutions?

  Sesame problem on my iPad mini I want to finish the update already

• 9.3 IOS cannot be verified.  Says the Iphone 5 is not connected to the internet when it is.

  My Iphone 5 will check the IOS 9.3 update.  The message says that the phone is not connected to the internet when I know that it is.  What is the problem?

  There are widespread reports that older devices have problems with activation after the update. Your question is before the update.

  This seems to be a different problem, but I suspect it's really Apple prevents you from installing the update, you already downloaded, until they solve the problem of activation with the update.

  For those who connect via iTunes, you would see that you are already using the latest version, because this is now the latest version that you can download. Your phone has already downloaded, if Apple blocks you install.

  Wait for the update of the update. I bet that you should remove the 9.3-same already downloaded install file to your storage management settings.

• When you try to print photos or turn them into a book, I constantly get the message that I 'am not connected to the internet"when I am clearly, via wifi.

  PHOTOS, Version 1.3 often gives me an error message "you are not connected to the internet" when I am clearly, via wifi.  This happens when I try to print a photo or to place pictures in a book.  (It also happens when I ask to export a photo on the desk, but then it is exported, despite the error message.) In the preferences of pictures, I chose "download the originals of this Mac", but the problem seems to be when the photo of the cloud recovery.  My operating system is up-to-date: 10.11.3.  My desktop Mac is mid-2010.  I take quite a few photos, and maybe download them to the cloud and then download them to my computer takes a long time.  That's the only explanation I can find.

  You have activated the iCloud photo library and selected the option to optimize the photos in your local library?

  If Yes, then the Photos is a download full version size for use in the book, print, or share via email, etc.

  

• "Not connected to the internet" when trying to access the help files

  original title: when I try to access the help topics in the utility of Windows backup and some other programs I get a screen in the right panel that says I am not connected to the internet when I am.

  When I try to access the help topics in the utility of Windows backup and some other programs I get a screen in the right panel that says: I am not connected

  to the internet when I am.  Does anyone have a solution to this problem so I can use the help topics?

  Hi advbill,

  You try to access the items online or offline help?

  a. press F1 on the keyboard.

  b. click Options, and then click settings.

  c. check to improve my search online help

  d. click on apply and OK.

• My computer can not VAT registration and access the internet when connected to the network [secure] through wireless.

  Original title: fix problem 'local only' what is wireless.
   
  -My computer is a HP Pavilion dv5, running windows vista edition Home premium

  -My computer can identify and access the internet when connected to the network through a cable.

  -My computer can identify and access the internet when it is connected to the grace wireless network [without warranty].
  -My computer can't identify [unidentified network] and [room only] internet access when it is connected to the [secure] grace wireless network?
  -Other information systems, identify and access the internet when it is connected to the [secure] grace wireless network.
  -J' confirmed the network, try password works in "safe mode with network", manually configured (TCP/IPv4) using a connected computer.
  S ' Please, I'm desperate and in urgent need of help.

  Hello

  1. If it works well before?

  2 have you made any changes to the computer before the show?

  Method 1:

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point:
  http://support.Microsoft.com/kb/928152

  Method 2: Uninstall and reinstall the network adapter drivers.

  Follow the steps mentioned.

  (a) click Start, right click on computer.
  (b) click on properties, click on Device Manager
  (c) expand the network card, right-click the wireless adapter option
  (d) click on uninstall
  (e) now go to your computer/wireless device manufacturer's website, download the updated drivers and install them.

  Follow the below mentioned article:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Lose internet when I turn off printer (WUSB600N)

  I'm having a very strange problem.  When I turn off my Canon MX850 printer connected USB, I lose my internet connection.  I get this error message in my event viewer:

  Event type: WARNING
  Event source: Dhcp
  Event category: no
  Event ID: 1009
  Date: 11/03/2009
  Time: 12:11:55
  Description:
  A network error has occurred when trying to send a message. The error code is: a blocking operation was interrupted by a call to WSACancelBlockingCall.

  I am running Windows XP pro SP3 and my WUSB600N adapter is connected wireless to a Linksys WRT600N router.

  Someone has ideas of how solve this problem?

  Thank you!

  I solved this by uninstalling Linksys Wireless Network Monitor.  I no longer disconnect from the internet when I turn off a device USB or Firewire (ipod, canon mx850 printer, external hard drive).  However, by using the Automatic Configuration of Windows isn't a perfect solution.  The downside is that I frequently 2-5 second freeze ups in World of Warcraft with WZC, especially in combat.  So my solution is to stop the automatic configuration service once I started and have an internet connection.  This is quite annoying!

• Automatically log off the internet when the computer is idle for a few moments

  Why my computer (Vista) automatically disconnect internet when it is idle for several minutesand after downloading a file. The message that appears after downloading a file is something the performance data.

  Hi magicre,.

  (1) what is you receive the exact error message?

  (2) since when are you facing this problem?

  (3) remember you to make changes to the computer before this problem?

  Step 1: Disable the security software and then test to see if the problem persists. Follow the steps mentioned in the link below

  Disable antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.
  
  Step 2:run Internet Explorer in mode "no Add-ons" and then check if the problem persists

  To determine if the error is caused by an add-on, run Internet Explorer in "no Add-ons" mode To do this, follow these steps:

  1. click Startand type Internet Explorer in the box start the search .

  2. click on Internet Explorer (No Add-ons). Internet Explorer opens without Add-ons, toolbars, or plug-ins.

  3. test Internet Explorer to verify that it works correctly. If problems occur always,try step 2

  If no error occurs, the problem is caused by one of the Add-ons that typically load with Internet Explorer. In this case, follow the steps mentioned in the link to determine which add-on is causing the problem

  Optimize internet Explorer
  http://support.Microsoft.com/kb/936213

  (See method 3-2 in the link)

  If the problem persists,

  Step 3: Start the computer in safe mode with network and test it. To do this, follow the steps below:

  Access the menu options advanced start by turning on your computer by pressing key F8 beforeWindows begins. Advanced startup options menu select SafeMode with networking

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Let me know if the problem persists in this mode

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged as an administrator, but cannot connect to the internet using the standard account. How to fix this?

  After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged in as an administrator,

  but unable to connect to the internet using the standard account.  I have the latest version of the Solution Explorer.

  How to fix this?

  Glad to hear it.

  If the problem is resolved, mark the message as response, then it'll be useful for people with similar/identical problem.

• Cannot access subnet when VPN would be

  When I vpn in our network, it gives me an ip address in the range: 192.168.200.1 - 192.168.200.50.

  The following access works when vpn would be: 192.168.200.x-> 10.2.28.x

  Made following access does not work when the vpn would be: 192.168.200.x-> 192.168.50.x

  Can you get it someone please let me know what I have in the PIX config to make it work?

  Thank you

  Thomas

  1. Add 192.168.50.0 to your acl of split tunnel

  remotevpnbhc_splitTunnelAcl 192.168.50.0 ip access list allow 255.255.252.0 all

  2. Add the traffic between the client vpn and 192.168.50.0 ACL that is used by NAT 0

  vpn_insideacl ip 192.16.50.0 access list allow 255.255.252.0 192.168.200.0 255.255.255.0

• Windows 7 - says that I am not connected to the internet when I am.

  Original title: why

  Why my computer says that I am not connected to the internet when I am and no web pages don't show because they say that I'm not connected

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.