No matter what BB-moderators REALLY real on these forums?

Similar Questions

• Does really matter what you have on your server remotely to services-config. XML

  Hi there, does really matter what you have on your server remotely to services-config. XML?

  The information not only get cooked in the flex application 3 when compiling on my local computer?

  I don't think it's good!

  If you don't have any config file, you can configure a remote object. The config file manages the default settings.

  If you implement something like

  
  destination = "amf".
  source = 'remoteServiceName '.
  "point endpoint ="http://myDomain/amfphp/gateway.php"
  Fault = "handleFault (Event)" > "
         
     

  It will work!

  Dany

• HP presario cq56: CQ56 Wifi won't turn on no matter what.

  Today I have re-installed winsows 7 starter 32 bit on my hp presario cq56 and everything goes smoothly.
  
  All video/sound/lan drivers go perfectly. BUT when its time to install things driver WLAN/WiFi to the South.
  Nothing works. I downloaded all the drivers specified wifi from HP site downloaded drivers from 3rd party websites aswell. Broused forums and what not for 3 hours but nothing seems to work.
  
  The rest F12 key orange no matter what I do. FN + F12 or F12 by itself does nothing.
  
  My Device Manager looks like: http://i.imgur.com/IHi0fwr.pngthat's what SHOULD look like: http://i.imgur.com/SFjvZNG.png (since a real WORK laptop)
  
  Help, please.

  Hello:

  You need the driver for this device...

  FTP://ftp.HP.com/pub/SoftPaq/sp53501-54000/sp53663.exe

• I'm having a problem with my power supply options, no matter what I do, it goes automatically into mode standby a few minutes running.

  I keep changing power options, even the one who always says, but this isn't help even when I restart after setting up things. It will just automatically to stand-by after a few minutes, no matter what I do, most of the time and not always. so it happened me really confused as far as what I need to do.

  Hello

  You did changes to the computer before the show?

  Method 1:

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756
  (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows
   
  You can check if for a network card power management is disabled.

  How to disable for a network card power management when you deploy Windows XP

  http://support.Microsoft.com/kb/837058

  Method 2:

  Log on to the computer manufacturer website and update the latest drivers for chipset, BIOS (Basic Input\Output System). Also, look for other updates to the device driver.

  Reference: How to manage devices in Windows XP

  Note: Update of the BIOS can be a complicated process, and if an error occurs, your computer could be rendered unusable. Be sure to observe the instructions of the manufacturer.

  You can see the following article for more information:

  How to solve the problems of hibernation and standby in Windows XP

  http://support.Microsoft.com/kb/907477

  Let us know if it helps!

• REMOVE ERROR COMES WHEN I OPEN (DOUBLE CLICK) NO MATTER WHAT FILE/FOLDER/ICON ON THE DESKTOP OR IN ANY DRIVE. ANY BODY CAN HELP ME?

  When I open no matter what folder/file/icon deletion error comes.

  Error Says: - Summers - you really want to delete the folder/file/icon of your drive/folder/desktop?

  To restore them later, go to the display of the control panel.

  I AM USING WINDOW XP PROFESSIONAL VERSION 2002 SERVICE PACK 2.

  CAN SOMEONE PLEASE HELP OUT ME?

  Hey david,

  I did this work, sfc/scannow and rebooted system as well.

  But the PROBLEM IS STILL THERE?

  Y at - there a sollution for d even more?

  Have you tried rebuilding cache of icons?

  If that doesn't help either, then please repost to the forum, the Performance and the "Windows XP" care section. You are now at the Vista forum.
  http://social.answers.Microsoft.com/forums/en-us/xpperformance/threads For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Almost all cases no matter what programs run almost 100% of the CPU running.

  Hey guys I have a problem I could use some help with.

  I have a Dell Studio 1555 laptop

  Windows Vista Edition Home Premium 64-bit

  4 GB of Ram

  Intel Duo Core T6500 @ 2.1 GHZ

  I've had this laptop over a year now and it works perfectly but around a week ago, he went a little out of whack.

  Basically, no matter what programs are running my CPU usage will be 90-100%, which makes the laptop almost impossible to use.

  It comes and goes a bit, but for the majority of the time is around this margin. (for example I wrote that his party up to 10% once again, little about what I expected, but it will rocket upward again in a few minutes)

  The strange thing is that it doesn't seem to be a program or .exe using all CPU. Sometimes odd things as Dell Dock (which must use almost nothing) use up to 40% and if that gets closed or temporarily fixed things like explorer.exe, svchost.exe or whatever happens to be executed at the moment when will start using more CPU and look back up to 100%.

  Only, this started happening recently and I have no idea what made him... Any thoughts?

  Thanks a lot for all the suggestions/help

  (and just a quick update)

  My computer stopped a few times now unexpectedly as well and do not restart for 10 minutes. Once again, no idea why... The back of it felt very hot but I wonder if a fan issue could play a role?)

  Hello

  Heat can be the cause where the result of the CPU running so high. Make sure that the vents are clear and
  try adding a small fan blowing in the wind (or at least through them) to see how effective that has
  on the question.

  Check with a computer store real (not of leeks and glances at a Best Buy or other department stores) or Dell
  Support and Forums for known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  ---------------------------------------------------------------------------------------------------------------------

  This is a tool for troubleshooting to see if the software is part of the question - start with a clean boot.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• IPhone driver will not install in VISTA - little matter what I do!

  I spent 10 hours today trying to get my ipod touch recognized on my laptop once again online, because it does not appear in windows or itunes.  I followed all the suggestions of the apple on the drivers page and the pages of microsoft, including reinstallation of itunes, to try dozens of times to reinstall the driver.  Can I said that legacy is an ov534 of camer apollo Omnivision, when it's really an ipod touch.  No matter what I do, the driver fails.

  All advice gratefully appreciate it, other than to try to reinstall the driver.

  I saw a thread somewhere on a file is missing, but I don't have a clue as how to do the copy of one part of Vista to another file that they were referring to, as I'm not really tech savvy.

  Thank you.

  Hello MassMom,

  I don't know if you have tried the steps listed in the article. I see that you can install file USB if the phone is detected as a camera.

  Here is a link you can follow:

  http://support.Apple.com/kb/ts1538

  I also suggest that you post your question on the forums for discussion of Apple a better answer to your question.

  http://discussions.info.Apple.com/category.jspa?categoryID=201

  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Cannot turn on wireless capabilities, no matter what I've done accordingly to the FaQ of the community.

  I can't turn on my WiFi feature, I did everything said in the community FaQ, but each of them has failed. I did the 'enable the wireless connection. "Troubleshooting", etc. I tried to turn on by windows Mobility Center, but I can't turn it on no matter what I do. It starts to really * me off, it has been so since a week now. Please answer as soon as POSSIBLE. Thanks 3

  Hi Chachiatos,

  Please try this:
  http://www.dslreports.com/FAQ/13657
  Hope this helps
  Martin

• For some reason I can't link to a youtube video to work no matter what, the other URL works fine

  Title says it all really. I have a picture on my site and when you click on the button should link to a youtube video. However, no matter what, I always get www.mywebsite.com/www.youtube...etc. And yes I know you can http:// in there, or something for it to work. I tried all the variations of the youtube link, including shortened it gives when you click on the share icon. But no matter what, I get the same result. I tried to delete it all and from scratch too. I have other images that point to other sites Web and those all work very well. It's just this one youtube. I even tried to copy one of those, change the image and by posting the link here. Nothing.

  Maybe I'm just something missing. I'm not the most experienced person with software, so bear with me. I use CS5.5. Let me know if there is more info that I can give you to help.

  Thank you!

  If your Web site host has an active cache engine, you may not be able to see the most recent version of your page immediately. If I remove https:// in your link, I can reproduce your results. Have you tried to save your page with a different name and the download as a test?

  If you hover over the two graphs in the following link, you can see that one on the left will add my website to the URL link, while the one on the right works as expected: Connection Test

• tried for three days trying to get this working and I've already tried some of the suggestions forum and it's just to try... so happy I don't have pais nothing yet. I get out the signed loop no matter what I try

  tried for three days trying to get this working and I've already tried some of the suggestions forum and it's just to try... so happy I don't have pais nothing yet. I get out the signed loop no matter what I try

  While in have you really tried? It's the standard solution, and it works in all cases that I have heard (including mine). Just rename the file, and a new one is created on the next launch.

  

• Images exported in CS4 all blacks no matter what settings... help.

  I currently have 105 officers in a stack of Photoshop CS4. No matter what settings I use, video codec, or what image format I select to export a video, photoshop export 105 pictures black white image. I'm really pretty darn tired of this, and the search on the Google/Adobe forum for "exported all black frames cs4/photoshop" doesn't bring anything.

  Also, I tried the "export to files layers", but it takes 10-15 seconds to export every frame of 520 x 520 pixels! It copies then slowly removes 104 layers for each image, before it saves the image and is horribly slow. Is - this malfunction or just badly written? I do not know. Can't you just save each layer one by one instead of do this archaic process? I guess at the time where he finished this forum will probably not even a response, but this document is only 38MB and it shouldn't take 26 minutes to export images for a second 7 video. I have pretty bad to get just those executives ready to edit IN photoshop, and now I can't get other than this ridiculously slow method. So frustrating to have hours of roadblocks at every step of an animation which is going to be less than 1 MB, in the end.

  What should I do?

  Probably we are not talking about the same thing here. I, would have also taken that you actually talk video rendering. Export layers to files via the script is an entirely different thing. in this case, I would look for things like layers or the specific layer styles and belnding options be involved. I think also there is a bug in the script that sometimes prevents things from work. Some users have reported problems with this in the past. Forums to search might turn some clues...

  Mylenium

• Is what I got - a real database?

  Hello!
  
  Huge apologies for a stupid question, but I need an opinion of knowledgeable people.
  
  One of our "partners" provided us with supposedly a database. I've never dealt with Oracle and have no idea if it's a real database.
  
  Is there a special extension of the files containing the data? The files contains a bunch of .dll, .ser files .jar and some others. I suspect (in fact, I'm 99% sure) is not a database at all, but rather a bunch of garbage. What do you think?
  
  Thank you

  .dll, .ser, average .jar of files that it is an Installation - what we call 'Software RDBMS' are sometimes what many people call "Database".

  Normally install you the software and then, using the software installed, create the database.

  Database files should normally have. DBF extension but there is no hard and fast rule. The ADMINISTRATOR can create a database with files with no extension, no matter what extension, any combination of extensions!

  (Windows File Explorer certainly cannot identify database files!).

• research and new tabs take up yahoo no matter what I do in the options

  No matter what I do, the search engines in the toolbar by default return Yahoo! Remove all but Google does not help. When you restart Firefox Yahoo is the default value. Similarly, new tabs and the home page back to Yahoo after the reopening. This is a new laptop HP with Windows 10 and I just downloaded Firefox. I spent a lot of time trying to solve this problem and about to give up and to switch browsers. I bet that Chrome will allow me to use Google.

  Generally, changes in parameters are retained between reboots. If you change other preferences such as your home page, Firefox manages to retain those between reboots?

  We have an article of general support on issues that may lead to changes to get lost between sessions: How to fix preferences that will not save.

  Two other thoughts:

  (1) some software utility/security/life private changes the folder of Firefox settings between sessions. This includes Advanced SystemCare and various programs 'homepage protection' or "browsing protection" feature. If you have any software with a similar feature, disable it until everything is set as you want and stable.

  (2) you might check all the extensions that could possibly change the settings when you start Firefox. You can do this on the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then, take a critical look on the list on the right side. On a new installation, it is usually empty, unless Firefox has detected the extensions that already exist on your system. Something unexpected?

• No matter what I do to get my Thunderbird as default email, GMAIL can always be default mail. What should I do now?

  I checked everything should be checked in the Thunderbird preferences, to make it the default mail provider, but no matter what I have gmail always happen to be the default email.
  TI tha.
  Thank you

  This happens when you click on a mailto link in your browser? You should maybe define TB as default, for example, for Firefox, see these instructions:

  https://support.Mozilla.org/en-us/KB/change-program-used-open-email-links

  A similar approach applies to the IE, Chrome etc.

• No matter what I do on firefox, I get a message that the action is not reliable. How can I fix it?

  I started this morning, opens Firefox as usual. The normal task bar has been replaced by a taskbar of Bing. I couldn't get rid of him. So, I tried to reset Firefox. The taskbar of Bing was not deleted. I uninstalled firefox and downloaded the latest version and installed. I also uninstalled the taskbar of Bing as found in my list of programs. I opened Firefox and no matter what I select on the menu or on a website a message appears saying that the site is not reliable. It is as far as I can get in Firefox! The message arrives even for internal actions within Firefox. How can I fix it. It's very frustrating!

  Make a check of malware with several malware scanning of programs on the Windows computer.
  
  Please scan with all programs, because each program detects a different malicious program.
  
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender:
    http://Windows.Microsoft.com/en-us/Windows/using-Defender
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked