No more connected after an update of Windows shared folders

Similar Questions

• (Redirected) Can't connect after free update to Windows 10 of Windows7

  I wasn't able to connect from the passage of Windows7 for Windows on my DELL OPTIPLEX DT 10 3020 462-3548 r

  Any help or ideas would be appreciated.

  Thank you!

  Best of this post in the forum Windows 10 here:

  http://en.community.Dell.com/support-forums/software-OS/f/4997

  Bev.

• CS2 problem reinstalling after the update to windows 10

  After the update to Windows 10, I get a message saying that my license file is damaged or something of this nature.  I'm going to connect to the Adobe account and use the old version of registry.  By putting in the license number, it says it is already in use.   I tried to uninstall and install CS2 but get the same result.  How can I re-register?

  Thank you

  Hi tonytiny,

  You cannot save Adobe CS2 products as the CS2 products activation server is no longer available. To use a CS2 application, you must uninstall your existing application of CS2.

  Once done, please download and install the CS2 products from the link below. You cannot reinstall from your original disks.

  Please find the link for more information about the Activation of the server unavailable for CS2 products below...

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

  Please follow the link below to download the CS2 products. You will also find the serial number as well as the configuration file.

  Download Acrobat 7 and CS2 products

  Please let us know for any further assistance.

  ~ UL

• HP EliteBook 850 G3: HP EliteBook 850 G3: its problems after the update of Windows 10 anniversary

  Hi people!

  After the update of Windows 10 birthday I have problems with my sound card. There are two sound cards listed by Device Manager. The first is "Conexant Audio of ISST" and the second "Intel High Definition Audio". I know not weather it was the case before the update. I just recognized it after the update when I had sound problems.

  In any case, on a sound start works on the other boot it does not work. It seems that Windows chooses the sound card, every time when it starts. Sometimes it takes the bad sound card.

  I tried to uninstall maps its and their resettlement. On the HP site, there is a driver for the Conexant map bot no driver for Intel High Definition Audio card. 10 Windows itself is not find a driver for this sound card. I also tried to reinstall the other drivers, chipset drivers for example. But unfortunately it did not help. I also tried to disable the Intel High Definition Audio, but also without success.

  What else can I try? I don't want to reinstall Windows. There must be a solution without this. Any ideas? Here's a screenshot of my device manager, perhaps it helps:

  

  If you need more information, please let me know.

  Best regards

  Ty

  I just tried this driver and I still have sound after 6 resets.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_171406_1

• Satellite P200-P100 - black screen after an update of Windows 7

  Hello

  I have a Toshiba Satellite P200-P100 running Windows 7.
  A few weeks ago after an update of Windows 7, my monitor would not show any image, that she lit up, but still no picture. Not even the BIOS it will appoint.

  I fixed it by using the system restore using a different monitor. The same thing happened again today, I must have ran the same update, but this time a system restore does not, any more than to reinstall Win 7.

  Any suggestions?

  Thank you
  Spre3

  Hello

  You mean you don't see anything about internal or external monitor, even switching of the output of the screen by pressing the FN + F5 buttons?
  Hmm. in my opinion has nothing to do with the Windows 7 update

  I mean the update/install of Win 7 OS should not affect the BIOS and you should be able to access the BIOS, even if no operating system is installed on the HARD drive!
  So I guess the question could be linked to the question of the motherboard or some parts placed on the motherboard

  Have you tried that?
  Remove the battery and unplug the AC adapter
  Then wait a little (1 hour) and then reconnect the two parts.
  Then try to turn on the device

  If this will not help the RAM modules must be verified.

• HP ENVY dv6 Notebook PC: press the / STOP the envy of hp dv6 7204se do not work after the update of windows 10

  the power button of my hp dv6 7204se envy key do not work after the update of windows 10

  any help on this please?

  .

• After an update of Window Vista Business, I lost the option of hibernation

  After an update of Window Vista Business, I lost the option of hibernation

  How can I solve this problem?
  Thank you

  Hey Joe,

  What is the number of the Windows Update installed recently?

  I suggest you to follow the steps from the link and check if it helps.

  How can I enable hibernation on my Windows Vista computer?

  I hope this helps.

• Photoshop and Illustrator is not opening after the update of Windows 10 anniversary

  Hello!

  After the update of Windows 10 anniversary, Photoshop and Illustrator can't open. What should I do?

  Thank you!

  not serious.

  You get an error message or Apps do not respond when you try to open.

  You can run the System File Checker to see if there are any problems with Windows OS after upgrade files,

  https://support.Microsoft.com/en-in/KB/929833

  As for the latest CC applications you need to install the latest package updates Visual C++ Re-distributable.

  See the link below:

  Updated Visual C++ Runtime 2015

• After opening a PDF file in Acrobat 9 Pro, I get error "Suite Product Activation necessary...". ', this after last update of Windows 10

  After opening a PDF file in Acrobat 9 Pro, I get error "Suite Product Activation necessary...". ', this after last update of Windows 10 - what is a solution?

  Hi patsyf58769691,

  Acrobat 9 is not compatible with Windows 10, but give it a try error "Serial number." incorrect Acrobat 9 | CS4.

  Kind regards
  Nicos

• After having updated for Windows 10, if I try Sava a file in TIFF format, it will not save and Photoshop freezes. Is this a known problem and is at - it a cure please?

  After having updated to Windows 10. If I try to save a file in TIFF format, it will not save and Photoshop CS6 freezes. This is a known fault and is at - it a cure please?

  • Please would the ' Save in the background ' option and check if this helps you in any way. "
  • To activate this option, choose Preferences > file management and save in the background check
  • If this does not help, try to reset the Photoshop preferences after the bottom of the article:

  Using Photoshop | Preferences

  PS: Restart Photoshop when you make changes in the preferences.

  ~ Sarika

• Adobe Premiere is freezing and reading lag after 2015 update on Windows 7

  Adobe Premiere is freezing and reading lag after 2015 update on Windows 7.

  Even if I add a simple title or shorten a clip in a few images, these tiny adjustments can make the software freeze and two windows appear in the preview window.

  He will not be reading sometimes 30 seconds every time I do this minor changes.

  Photoshop is also very slow when loading.

  For the record, I don't use ANY 3rd party plugins.

  Overall the new update seems not at all work very well.

  How can I reinstall the previous version all CC 2014 please?

  I use the software a few hours a day and I can say that previous versions of the products worked well and I never had any real problems in the previous 18 months - the new version is somewhat a mess.

  Yes, with a subscription of the cc, you can install and use the cs6, cc, 2014 and 2015 CC cc.

  to install cc 2014 open your desktop cc app > apps > find additional applications > previous version > first pro install > cc 2014.

• After an update of Windows (XP), my internet connection hangs up

  Earlier this summer after letting one of my netbook computers have a "update" for Windows my connection switched to internet hangs up.  I don't have to troubleshoot it at the time because I got another XP netbook that had not been updated and it continued to work.  Unfortunately the next time I had a connection high speed available let him update this netbook also, and now it crashes on the dial-up connection.  In both cases, I use the same modem.  I connected the modem to a Windows 7 computer and he composed and connects to the internet and works very well.  It's something to do with the Windows updates for XP netbooks.  Is there a known issue with this?

  ... I am a little concerned about any specific questions about my internet security

  You should be concerned!  McAfee (and Norton) applications are notorious for not not upgrade (or uninstalling) itself.

  Note: The following assumes that none of your McAfee subscriptions (or free trial period) have already expired...

  [You may want to print these instructions for reference offline. [If a step said to restart, restart! ]

  1. download the McAfee Consumer Product Removal, save it to your desktop tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. physically disconnect the computer from the internet and local networks.

  4 uninstall McAfee Internet Security via Add/Remove Programs & reboot.

  5 IMPORTANT! => Make absolutely certain that the Windows Firewall is enabled (Yes, even if you are not connected to the internet).

  6. double-click on the file that you saved in #1 above to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  7 to reconnect your computer to the internet. Do NOTHING else online until you have completed ALL the steps below!

  8. do a clean install of Norton Internet Security using your CD.  If you purchased the software directly from McAfee, go to https://home.mcafee.com/Secure/Protected/Login.aspx to connect and download your software.  FOLLOW ALL THE INSTRUCTIONS!

  9 IMPORTANT! => Manually and repeatedly updating McAfee Internet Security until you get a "not more than updated" or similar prompt.

  10. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 & run the difficulty.

  11 IMPORTANT - DON'T SKIP THIS STEP! Open Internet Explorer (only!) to http://support.microsoft.com/kb/971058 of => [ignore all DO NOT APPLY or NOT RECOMMENDED warnings] & run the difficulty in DEFAULT modes and AGGRESSIVE. [1] [2].

  12 restart a last time & test.

  ===================================================
  [1] reject (close) "automated convenience store" solve this pop-up that appears when you open the Web page, and then run the difficulty he 50202 (in DEFAULT and modes and AGGRESSIVE) instead. If needed, you can click the difficulty he 50202 & SAVE the download to your desktop and then run it manually (in DEFAULT and modes and AGGRESSIVE).

  [2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• Thunderbird freezes for receipt of emails, unable to use until they are downloaded. RESOLVED itself after several updates of Windows

  Whenever I get all new email, Thunderbird freezes completely and I'm unable to use it until the emails have finished to download. It happened this last month. I have a PC, Windows 7 and not using Bitdefender. I have no antivirus software installed and Windows Defender.

  I'm not very technical and would appreciate assistance payment facilities!

  Thank you
  Helen

  Hello

  Thanks for your replies. Just back in line, and after a lot of windows updates, that the problem seems to be resolved, well that always a little slow going. I'll see what happens on the report and the weekend when I use more if the problem comes back.

• After going into sleep mode after automatic update of Windows 7, Pavilion p6210y PC won't sleep

  In two weeks, after an update of HP launched automatically, my monitor is not recognized - I tried to restart my PC via the power button, but the action brought everything back without interruption to the place.  Finally I made the necessary update HP closed down and all was back to normal.  Last night I made a full stop and a Windows 7 launched updates (do not turn off your computer, etc..).  This morning when I powered back upward, I got messages on the windows during Setup, etc, then everything returned normally.  I worked for a few hours and left the machine - it entered into mode 'sleep' and now I can't get out of fashion "Eve".  If I power cycle the monitor, I can messages same "cannot detect.  If I try to shut down the PC via the power button, the light is orange/sleep, I hear a humming, then seeing if off, then back to orange/snoring, reverse, etc..  Keeps the bike like this.  I'm afraid that question a couple of weeks may have been a sign of early warning of a problem of h/w, but am not sure.  Can anyone help?  I am not very savvy h/w... and hope that it is something more simple than that.  The PC is 2.5 years.

  Your need to deactivate "standby" as soon as POSSIBLE to determine what is happening. You have 2 numbers because your motherboard is the infamous M2N78 - LA.

  That hum maybe the CPU fan:http://h30434.www3.hp.com/t5/Other-Desktop-PC-questions/To-all-with-M2N78-LA-CPU-fan-constantly-changing-speed/td-p/704265

  The other issue is more complex. Overheating the Nvidia chip. This chip share logic and circuits with the SATA hard drive controller and the graphics port. http://h30434.www3.HP.com/T5/desktop-hardware/m8530f-desktop-PC-with-a-M2N78-la-mother-board-doesn-t-see-my/TD-p/181716

  Your need to read each section and each answer. I suggest you save and move forward with all the measures that you feel is of advantage.

• After the updates of windows, the computer stops responding with a black screen at startup of the system

  Original title: Windows XP does not start after the update, no error message

  Has made no changes to the system, but the last thing that happened was an update of Windows security on stop.

  Now when I boot, the BIOS p.o.s.t. shows good HDs, good DVD-Rom, RAM, but Windows never starts, goes just a black screen, HDs are not accessed.

  -F8 does nothing, can't use the last known good Config or Mode safe

  -Change boot order in the BIOS to boot from the Windows XP DVD, hoping to get the recovery console, but the same thing: black screen, no attempt to spin-up DVD or HDs.

  -Removal of mobo battery to reset the CMOS, no joy.

  -Checked and re checked all connections inside.

  -Stripped devices and added one at a time, no joy.

  -Traded-in an old video card in case it was difficult to generate the higher res gfx, no joy.

  I was construction/upgrade / repair my own PC for 3 decades and can usually solve the problem and fix it myself, but this one me completely baffled.

  Any suggestions?

  Hi Cougarific,

  We recommend that you repair your Windows installation in according to method 2 of this article and check the result.
  See computer stops responding with a black screen when you start Windows XP
  

  Note: When you perform a repair installation, it restores the current installation of Windows XP to the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows XP disc.

  Visit our Microsoft answers feedback Forum and let us know what you think.