NO MORE CONNECTION

Similar Questions

• I'm trying to update to 9.3. In the settings there to show as it is downloaded, but when you click install now, etc., I get a message that it cannot verify because we are is more connected to the Internet (which we really are). Help!

  Please help with 9.3 update.  I get the message that the update cannot check because we are is more connected to the Internet.  Restart does not help.

  Apple released the update iOS 9.3 for older devices (air of iPad and previous iPhone, 5 s and previous) due to problems with Activation. See the following for details and possible solutions.

  http://www.IMore.com/Apple-working-iOS-93-fix-older-iPhone-iPad

  https://support.Apple.com/en-us/HT206203

  A new version for the iPad 2 is now available which does not require the activation step. A new version for other devices is not yet available. You will have to wait for that Apple releases a new version for Air. If your works well at the moment you are one of the lucky ones.

• I need to connect 3 computers to one computer, but I get the error message: "no more connections are possible at this remote computer at this time because there are already as many connections as the computer can accept."

  I just bought a copy of a license 3 reviews for QuickBooks Pro 2010. I can connect 2 computers on the home network very well. But when I try to connect computer (network) a 3rd to my machine to share the file, I get the error message. "No more connections are possible at this remote computer at this time because there are already as many connections as the computer can accept." How can I connect my 3rd computer?

  I read the article in the following link, to change the value of the EnableConnectionRateLimiting, but I do not see this key.
  http://support.Microsoft.com/default.aspx/KB/969710

  I currently have Windows Vista Home Premium SP2, 64-bit edition.

  Hello

  Thanks for the response back.

  The command explained in article http://support.microsoft.com/kb/314882 if applies also for Vista, we have been able to run the command.

  Some possible causes for failure Remote Desktop connection are:
  a. authentication level is low/disabled.
  (b) the port of remote desktop can be blocked by a firewall.
  c. remote connections might not be enabled on the remote computer.
  d. the remote computer may be asleep or hibernating.
  e. e user account doesn't have a password.
  f. the remote computer may be too busy to accept more connections.

  To resolve all of the above causes, follow the steps listed under "I can't connect to the remote computer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Remote-Desktop-problems

  I hope this helps.

  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.

• How to validate SQL * MORE connection in Unix shell script

  I wrote the following function in unix shell script to validate SQL * MORE connection and throw a user-defined message.

  function check_db_conn

  {

  output | sqlplus-s-L $User/$Password@$SID >/dev/null

  If [[$?-no 0]]; then

  echo 'credentials incorrect DB.

  FI

  }

  However, I would like to change this feature so that the user has entered a good connection and that there is a problem with TNS listener must display the appropriate message.

  Hello

  Try adding:

  lsnrctl status $listener_name > /dev/null
  if [[ $? -ne 0 ]]; then
    echo "Issue with Listener"
  fi
  

• App is more connected to the internet.

  I had a problem two weeks where the Frontier Brave app loses the connection to the internet. It requires a download on the app store, then it requires an additional installation. 14% in the download (varying from time to time, but rarely going above 14%) it stops and says that "a connection error has occurred.". Brave frontier was the only application that I had this problem on for more than a week, and then later hero Buster, another app, has had a similar problem. My other apps game (Puzzle and the Dragons and the dungeon bosses, for example) work perfectly well. I have never internet problems on something else.

  The strangest part of this is that Frontier Brave actually install successfully the first time that I downloaded. Later, I had to remove it due to another problem, but when I tried to re-download it, he stopped to install correctly. I looked to see if anyone else has had this problem and I couldn't find anything remotely recent. The application itself seems not to be to blame, because none of the forums dedicated to the game discuss this issue.

  I have tried the following to try to make it work:

  -Removed and reinstalled the app.

  -Restarted my iPod.

  -Ensure that the date/time information is synchronized.

  -Changing my DNS server.

  -Reset the settings of my network.

  The only other suggestion I found is a complete factory reset, but I can't do it without losing my data on my other apps, since for some reason any iTunes does not seem to be to make backups of my iPod properly (even if it is a question for another time). Is there anything I might be able to do to try to get these apps to work?

  I use an iPod Touch 6th generation with iOS 9.2.1 (this problem before and after the upgrade).

  Have you put off, then back on your router?

  This happens with all networks?

  Probably just a problem with the internet connection of servers/general which there can't do anything

• HP Officejet Pro 8600 N911g: 8600 Officejet more connection WiFi

  When I look at the WiFi signals available on my cell phone, I see my printer is a WiFi signal (name: 'HP-Print-20-Office'), but it asks for a password and I don't know how to enter the system to change anything.

  

  I know somewhere I should be able to communicate with a web server of HP to rest my password for my registered e-mail address. But I have not yet found.

  Any suggestions?

  I finally found! I had to go on Youtube to find videos downloaded HP on how to print the configuration page, that you have suggested. She provided a procedure step by step on how to find the network configuration Page. The password is a series of numbers, not a word or phrase that I thought it might be. I am officially connected with more signal and speed. Thanks for your help.

• OfficeJet 6500 a more connected to the MacBook is not found by the HP utility, although it prints

  I recently upgraded to a Photosmart C5280 All-in-one to an Officejet 6500 has more for use with my MacBook.  The installation process was much more difficult that it should have been, particularly wireless configuration stage (the input field to get the WEP code was not active).  Since the installation of the printer that I use a USB connection to print and scan - I prefer to print using a wireless connection, but this feature seems to not work, even if the onboard display indicates that the printer has connected successfully to our local wireless network.

  I installed the widget dashboard and it detects the levels ink correctly, but when I click on the button of the device to maintain on the widget the HP utility warns me that it is unable to detect the printer, even if the printer is offline, and I can print them out and scan using the USB connection.

  I am also unable to print double-sided, which is an important feature, I want to be able to use.  No double sided button "print" or the checkbox appears in the print menu with all the applications that I usually use (for example: Adobe Acrobat, MS Word, MS Excel, MS PowerPoint).

  OK, OK - progress!

  We will restore the print system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Allows more connection, then the values of profile

  I use version.
  
  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
  PL/SQL Release 10.2.0.1.0 - Production
  CORE 10.2.0.1.0 Production
  AMT for Linux: Version 10.2.0.1.0 - Production
  NLSRTL Version 10.2.0.1.0 - Production
  
  
  This is the profile I'm using one of my patterns.
  
  CREATE a PROFILE auditprofile LIMIT
  SESSIONS_PER_USER 2
  CPU_PER_SESSION UNLIMITED
  CPU_PER_CALL UNLIMITED
  CONNECT_TIME UNLIMITED
  DEFAULT LOGICAL_READS_PER_SESSION
  LOGICAL_READS_PER_CALL UNLIMITED
  PRIVATE_SGA UNLIMITED
  COMPOSITE_LIMIT UNLIMITED
  Unlimited idle
  failed_login_attempts 10
  Unlimited password_life_time
  Unlimited password_reuse_time
  Unlimited password_reuse_max
  Unlimited password_lock_time
  password_grace_time unlimited
  
  still, it allows to connect more session then 2. Any explanation is very appreciated...

  Shrinika wrote:
  I use version.

  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
  PL/SQL Release 10.2.0.1.0 - Production
  CORE 10.2.0.1.0 Production
  AMT for Linux: Version 10.2.0.1.0 - Production
  NLSRTL Version 10.2.0.1.0 - Production

  This is the profile I'm using one of my patterns.

  CREATE a PROFILE auditprofile LIMIT
  SESSIONS_PER_USER 2
  CPU_PER_SESSION UNLIMITED
  CPU_PER_CALL UNLIMITED
  CONNECT_TIME UNLIMITED
  DEFAULT LOGICAL_READS_PER_SESSION
  LOGICAL_READS_PER_CALL UNLIMITED
  PRIVATE_SGA UNLIMITED
  COMPOSITE_LIMIT UNLIMITED
  Unlimited idle
  failed_login_attempts 10
  Unlimited password_life_time
  Unlimited password_reuse_time
  Unlimited password_reuse_max
  Unlimited password_lock_time
  password_grace_time unlimited

  still, it allows to connect more session then 2. Any explanation is very appreciated...

  You have the parameter RESOURCE_LIMIT = TRUE at the level of the system before you try?

  alter system set resource_limit=true;
  

  HTH
  Aman...

• ITunes is more connect to Iphone since 10.02 update

  Really frustrating! Install IOS10.02 update last night on my Iphone 5. Today I try to connect to the desktop Imac as I perfectly for a year, but this time, I get a message:

  "iTunes could not connect to the iPhone because an invalid response was received from the device."

  
  

  I also have a message on the iphone screen asking me if I want to trust the computer, which I click Yes. Makes no difference.
  

  
  

  Phone rebooted a couple of times. IMac restarted a couple of times, but no luck.

  So I need to do this week! Can anyone help?

  Good, me again. I see that I'm not getting a lot back. I use OS10.7.5 and iTunes12.2.25. Can anyone confirm this is where the problem lies?

  Thank you

  Joe

• Can't no more connection to Messages or FaceTime on MacMini

  I have been using my account Messages on an iPhone, iPad Mini Mac Pro and mid-2011. Recently, I think that after the update to El Capitan, Messages & FaceTime has stopped working on the Mac Mini, but still works very well on both devices.

  There is an old rule here of people with the same problem, largely unresolved: https://discussions.apple.com/thread/5510570

  I tried everything suggested in this thread without result. This same identifier Apple works fine on this computer, in iTunes, App Store, iCloud, it just stopped working in the Messages or FaceTime. I try to open a session the same ID that works successfully on the iPhone and iPad, but on the Mini, he says "could not sign an iMessage. An error occurred during activation. Try again. »

  I'm under 10.11.6.

  I am surprised to see that this has been a problem for so long, judging by this thread how much time is spent... Very frustrating.

  This could be a difficult problem to solve, as there are several possible causes for this. Please test after taking each of the steps that you have not already tried it. Back up all data before making any changes.

  Before proceeding, test on another network, if possible. This could be a Wi - Fi access point public, if your computer is portable, or a cellular network, if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or your ISP, not in your computer.

  Step 1

  Check the status of the service. If the service is stopped, wait until he comes back upward. There may be a power outage, localized, even if the indicator is green.

  Step 2

  In the menu bar, select

   ▹ System Preferences... ▹ Date & time zone ▹

  The nearest town from there where you are should be selected on the map.

  Step 3

  Disconnect you iMessage and FaceTime on all your Apple devices. Sign out and then sign back in. Try to connect again.

  Step 4

  Restart your router and your device at wide band, if they are separated. You may skip this step if you don't control these devices.

  Step 5

  Follow these instructions to view the serial number of the machine. If the number is missing or invalid according to the web form, take the machine to an Apple Store or another service center authorized to correct the problem.

  Step 6

  The measures suggested in this support article. If you do not understand some of the steps or leads them not, ask for advice. Note in particular that the email address associated to your identifier Apple should be checked. If the address is in the field obsolete mac.com, you will have to change.

  Step 7

  In the menu bar, select

   ▹ System Preferences... ▹ Network

  If the preferences window is locked, click the lock icon in the lower left corner and enter your password to unlock it. Click the Advanced button, and then select the Proxies tab. If the SOCKS Proxy box is checked, uncheck it. You don't need to change other parameters in the window. Click OK, and then apply. Test.

  The result may be that you can not connect to Internet at all. Cancel the change, if any, or if iMessage still does not work. Remember that you must apply changes made in the preferences window to take effect.

  Step 8

  Select in the menu bar

   ▹ System Preferences... ▹ Flash Player ▹ storage

  and click on

  Block all sites to store information on this computer

  Close the preferences window.

  Step 9

  Make sure that you know the ID and the password you use with iMessage. Launch the Keychain Access application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Use the search box in the toolbar of the Keychain Access window to find and remove all items containing "iMessage" or "com.apple.idms" in the name. Sign out and then sign back in.

  Step 10

  Select connections comments * and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.

  While signed in as a guest, you won't have access to your personal files or settings. Applications will behave as if you use them for the first time. Don't worry about that; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.

  Test while signed in as a guest. After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.

  * Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create an account to test and delete it, including his home folder, after testing.

  If iMessage worked in the guest account, stop here and post your results.

  Step 11

  Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is set, or if the boot volume is a Fusion drive or a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including his outputand Wi - Fi on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. After testing, restart as usual (i.e., not in safe mode) and test again.

  If iMessage worked in safe mode, but still does not work when you restart in 'normal' mode, stop here and post your results.

  Step 12

  Triple-click anywhere in the line below on this page to select this option:

  /Library/Preferences/com.apple.apsd.plist

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ reveal in Finder (or just to reveal)

  of the contextual menu.*, a file must open with a selected item. Move selected item to the trash. You may be prompted for administrator login password. Restart the computer and empty the trash.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  Step 13

  Reset the NVRAM.

  Step 14

  Reset the controller (SMC) system management.

  Step 15

  Reinstalling OS X.

  Step 16

  If none of the above steps resolve the issue, make an appointment 'Genius' on an Apple Retail Store or contact Apple's Support. When you configure a support call, select "Apple ID" as the product that you need help, not model material. In this way, if you're not under AppleCare, you can talk your way out of being charged for the call.

• First HP: after upgrade to premium, is is more connected to my computer

  until I'm able to send Notes between my first HP and Dell Computer.  I then upgraded the operating system of the first, and now it does not connect.  When I press 'send' on the Simulator in computer Dell running Windows 7, I get an error to reconnect the USB cable.  Disconnect and reconnect the cable isn't good, still the same problem.  What can I do to connect the calculator to the computer?

  Thanks for your help

  Thanks Mic - it was there, I forgot how I did the first time so I looked in the 616 User Guide page.  The user's Guide spoke on the connection of the cables when sharing data between computers.  The whole manual is not selecting menus and 'Connect To' thank you again for your help and your insight

• iOS 9.2.1 check failed because you are more connected to the Internet. What I'm doing. It's so boring. I am connected and 5g wifi works fine on safari etc.

  As above

  Looks like your signal doesn't work well. What network are you truly connected to? You mention 5G, then you mention Wi - Fi, which is? If it does well in OTA update, then I suggest you connect the device to the computer and iTunes and updated in this way.

• El Capitan Upgrade more connected np printer

  After update of El Capitan, my HP 5520 printer is no longer connected.  Any ideas?

  If you haven't already done so, try to reset the printing system.

  Reset the printing system - OS X El Capitan

• Upgrade the forces ' no more connections can be made... "message from XP Pro for... what? A server? Win 7?

  I have a pc four network all current XP to run. System has XP Pro. Since the addition of backup Carbonite has I run its 'input connections' when I try to access the network by the error message "no connection is possible to this remote computer at this time because there are already as many connections as the computer can accept." I reduced the AutoDisconnectTime of 15 minutes to 2 minutes perhttp://support.microsoft.com/kb/314882 with no benefit. I ran Netstat and TCPView with no illumination. So far, the Council must "upgrade server" or possibly for Win 7. Or the other of these works would be? Re 'server', I have no plans to add a fifth pc system. Can I just replace XP Pro on the system has a server sw offer? What server sw? If I take it will be all on system A look and operate as it does now - with the exception of the fixing of the problem?

  Monday, January 31, 2011 20:06:34 + 0000, Petermat wrote:

  If I go for Win 7 is the fact that I have four systems means that I have to buy two copies of the upgrade "three pack? I don't want to maintain both XP and 7 if I can avoid it.

  You are right that you can't use a pack of three on four computers. You
  buy two packs of three - or, better, a pack of three and a normal life
  a package.

  Ken Blake, Microsoft MVP

• OfficeJet pro 8600 more connects wireless, but does not connect to Internet

  I use Windows 7.  The free thread is ideal for printing, but I do not understand why the web

  does not connect.

  Hi susea;

  Hope you are doing well and I'm sorry that you are having problems.

  Jean-Marie this tool;  http://support.HP.com/us-en/document/c02037530

  If that didn't help then share what router you're using, please indicate brand and model? I'll offer to make sure that your router is updated with the most recent firmware, also I personally always use Google's DNS servers. Some servers DNS provided by your ISP (Internet service Provider)

  You can change this setting by going to do the following:

  Press the Win key on your keyboard.

  1. Type Ncpa.cpl (this will take you to the network connections)
  2. Select your wireless connection
  3. You will see a screen on the botton, you will see a button called properties, near the left button
  4. On the Properties menu go to IpV4 (if you don't see scroll down) double-click to open
  5. In this screen, you will see (get IP address automatically) slot that you wil see the Obtain DNS server address automatically select this option
  6. Type 8.8.8.8 and 8.8.4.4 airfield

  I will also choose a static IP address, and this can be done here as well.