Allows more connection, then the values of profile

Similar Questions

• Could not connect to the service user profile Service.

  I have a little disconcerting problem.  Every day or two, I can not connect to Windows correctly.  When I start, select my account (which is also the unique administrator account) and enter my password, it spends an abnormally long time in the 'Starting Windows' screen, then I get the following message pop up in the notification area:

  "Unable to connect to a windows service.
  Windows could not connect to the service user profile Service.
  This problem prevents limited users to logon to the system.
  As an administrator, you can review... »

  Shortly after this message, I get a windows error message saying:

  "Location is not available.
  C:\Windows\system32\config\systemprofile\Desktop is not accessible.
  Access is denied. »

  This seems just a desktop computer black with only the Recycle bin icon on it, and the old Windows Start button in the taskbar.

  While trying to understand what is happening, I looked into the application of 'Problem reports and solution' in the control panel and found that every time this happens, I also have a corresponding event of "Stopped working" "Routing and remote access.

  I then restart using F8 at startup and choose the one that says something to the effect of "using the last good configuration known."

  I'm not sure what that means at all, but I hope that one of you people can help.

  Thank you!

  Hello any Leafs fan,

  Thanks for posting on the Microsoft answers Forum.

  Looks like you're running only because of using a system restore to get back when your system is running. Now, you want to know what caused it.

  Usually, when the above error occurs, it is due to a corrupt user profile.
  The best way to fix this is to remove the user profile.

  • Go to the Start button
  • Right click on computer
  • Go to the properties
  • Go to Advanced System Properties on the left pane
  • Select the Advanced tab
  • Go to the user profile Section and click on the settings button
  • Find the profile for the that you want to remove and click Remove.  (It's the best way to remove the local profile in Windows Vista).
  • Connection again and you will get a new profile.
  • To get your Favorites return, go to the old profile in C:\users and copy the data manually.

  The only way to identify what caused the error with the user profile is to try to reproduce it.

  If you have not installed the update of Windows, then you can go to Windows updates and see what are the updates must be installed and manually download them and install them one at a time. Between the installation of the system, make sure you have a restore point that you can go back to if necessary. Once an update is installed, then close and open a session back (or reboot if required by the software update) and see if you get the error user profile. If the error occurs, then go to Services and see if the user profile service is running and set to automatic.

  If you are not able to do anything when the problem occurs, then try to start in safe mode using the F8 key and see if the problem occurs in safe mode.

  You can also look in the event viewer to see if there is no dealing with event profile user or Windows Update errors.
  To get to the event viewer, you can type in eventvwr.msc in the box start the search. This will bring up the event viewer and you can view the summary logs and see what kind of errors you encounter.

  Please post with your results and if you need further assistance.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Avoiding PC not allowed to connect to the wireless network

  AA: For wireless in our establishment, we have access Points on all floors that are in turn connected to the main server PC.
  When I opened the "wireless network connection state", click 'Wireless properties', then select 'Security', it shows the following:
  Security type: no authentication (Open)
  Encryption type: WEP
  Network security key *.
  When the "Show characters" checkbox is selected, it shows the "network security key.
  Is it possible that this security key can be hidden and therefore not visible at all. This avoids computers are not allowed to connect to the network.
  All PCs are loaded with windows 7.
  BB: All PC's are connected WIFI and their IP 192.168.1.100 to 120 with the subnet mask 255.255.255.0 range
  I need to connect some of the connected WLAN PC also by a connection to the local network for networking with a Satellite Communicator for internet connection.
  Setting regarding address LAN IP for the PC, I can give them the same IP from 192.168.1.121 to XXX or if IP address
  address be 192.168.0.xxx
  Adv. kindly

  Change in WPA2.
  Put a password on that isn't easy to guess and is greater than 8 characters.
   
  The security key you are watching is on your computer - you have entered it or allowed him to be registered.  Except if you give someone access to that computer (or a similar) they will not be able to get to this part of the system to see what you see.  If you give people access to the use of these systems, do not give them administrative access - they must only use computers as * users *.

• I'm trying to update to 9.3. In the settings there to show as it is downloaded, but when you click install now, etc., I get a message that it cannot verify because we are is more connected to the Internet (which we really are). Help!

  Please help with 9.3 update.  I get the message that the update cannot check because we are is more connected to the Internet.  Restart does not help.

  Apple released the update iOS 9.3 for older devices (air of iPad and previous iPhone, 5 s and previous) due to problems with Activation. See the following for details and possible solutions.

  http://www.IMore.com/Apple-working-iOS-93-fix-older-iPhone-iPad

  https://support.Apple.com/en-us/HT206203

  A new version for the iPad 2 is now available which does not require the activation step. A new version for other devices is not yet available. You will have to wait for that Apple releases a new version for Air. If your works well at the moment you are one of the lucky ones.

• How to capture the value of profile in AM

  Hello
  
  How to capture the value of profile in AM.
  
  Krishna

  Here is the code that you can use

    String profileValue=  getOADBTransaction().getProfile("profile Name");
  

  Thank you
  -Anil

• "Windows cannot connect to the service user profile service.

  SOMETIMES, when I log onto an account says "unable to connect to the user profile service service."  When I log into an administrator account, it displays a black screen and an error that says that my office has been denied access.  It began quite recently after I transferred all my gear in a new case.  I don't know if this has something to do with it.  I spent hours researching this and I can't find a way to solve the problem.  Help, please!

  Hello

  Since you don't have any attempt to Restore Points tapping F8 you can start and select last known good configuration
  Configuration.

  -----------------------------------------------------------------------------------------------------------------------

  If that doesn't work try these - such as using Safe Mode ADMIN and/or the hidden ADMIN account.

  Even if these aren't exactly the same methods please check solutions.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  =================

  If necessary:

  Make sure that all Windows Services are set to default values.

  Start - type in the search box-> find Services at top - double click.

  BlackViper - Services (value all default values)
  http://www.blackviper.com/WinVista/servicecfg.htm

  =================

  You might what to do that - an InPlace upgrade/repair facility that helps keep the
  programs and data backups redundant but are always a good idea.

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Can't connect! "The service user profile Service has no logon. User profile cannot be loaded. »

  I can't log on to my laptop. I get the message "the service user profile Service has no logon. User profile cannot be loaded. "Can anyone help?

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• App is more connected to the internet.

  I had a problem two weeks where the Frontier Brave app loses the connection to the internet. It requires a download on the app store, then it requires an additional installation. 14% in the download (varying from time to time, but rarely going above 14%) it stops and says that "a connection error has occurred.". Brave frontier was the only application that I had this problem on for more than a week, and then later hero Buster, another app, has had a similar problem. My other apps game (Puzzle and the Dragons and the dungeon bosses, for example) work perfectly well. I have never internet problems on something else.

  The strangest part of this is that Frontier Brave actually install successfully the first time that I downloaded. Later, I had to remove it due to another problem, but when I tried to re-download it, he stopped to install correctly. I looked to see if anyone else has had this problem and I couldn't find anything remotely recent. The application itself seems not to be to blame, because none of the forums dedicated to the game discuss this issue.

  I have tried the following to try to make it work:

  -Removed and reinstalled the app.

  -Restarted my iPod.

  -Ensure that the date/time information is synchronized.

  -Changing my DNS server.

  -Reset the settings of my network.

  The only other suggestion I found is a complete factory reset, but I can't do it without losing my data on my other apps, since for some reason any iTunes does not seem to be to make backups of my iPod properly (even if it is a question for another time). Is there anything I might be able to do to try to get these apps to work?

  I use an iPod Touch 6th generation with iOS 9.2.1 (this problem before and after the upgrade).

  Have you put off, then back on your router?

  This happens with all networks?

  Probably just a problem with the internet connection of servers/general which there can't do anything

• Cannot connect to the user's profile, can't remember the password

  I bought my HP Pavilion laptop of series g, almost 2 years ago. It worked perfectly until 2 days ago. When I woke up yesterday and went to the opening of session of Windows 7, I get the following message "the service user profile the logon failures. User profile cannot be loaded. »

  What should I do?

  Hello

  You can try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• .. more questions about the value of the slider extraction

  It is a matter of Alain S. .. .in your sugested code: The resistance value is equal to the value Y of the trace of the Z11re and the capacitor, or the value of the inductance are derived from the track of Z11im.  Inside the Structure of the event, the structure space 0 and 1 are connected to the same value of slider Y?  How can you tell the business structure to use (in this case 0) the track of Z11re and in case 1 Y the Y in the trail of Z11im? The calculated values seem fair? .. .it must be defined with CursIdx within the Structure of the event, but how and where can I see the installation of this control? Have a while loop for the Structure of the event force the program to loop always at this place, it generates a lot of CPU (I have add an indicator to see the number of iterations), it seems to me that the structure of the event should do this whitout was looping work? Kind regards

  After reading on CursIdx, I understand the concept.

  case closed.

• I download the software from amazon, but when I stop and connection then the software has been removed. can anyone help

  I have a samsung laptop with windows vista. and IE 9. I downloaded the software from amazon, but when I stopped and try to connect then I find that my laptop will not start. so I try to get back to samsung and they fix it so that I can connect, but then I find that the software has been deleted and I don't know why. can anyone help

  Hi elsie,

  As you mentioned you did a factory restore using the Samsung recovery disk, it restored the computer to factory settings & finally deleted the application from your computer.

  You can redownload the application & install it.

  Reference: Install a program

  Hope the helps of information.

• Studio of Financial Reporting does not allow to connect to the Essbase Server

  Hi all

  I installed 11.1.2.2 studio HFR (32 bit installed via the workspace) on my machine, and then you be connected in the Studio.

  When I try to create the Essbase inside connection, it throws me following error:

  "Unable to connect to the server.

  "Connection to the database connection login error: error: error getting CSS support for driver [com.hyperion.ap.aps.Driver] information".

  An idea to solve this problem.

  I tried following, but it's also not helping:

  -Run the command HRRunAnt.cmd script in the directory "D:\Oracle\Middleware\EPMSystem11R1\products\FinancialReportingStudio\products\financialreporting\install\bin".

  After installation

  Best regards,

  Amit Porwal

  Check these https://support.oracle.com/epmos/faces/DocumentDisplay?id=1504806.1&displayIndex=1

  https://support.Oracle.com/epmos/faces/DocumentDisplay?ID=1300530.1&DisplayIndex=2

  We first applies if EN is on 64 bit OS that you can ignore.

  Secondly, we are talking about a corrupted file admaps.jar, see if you can get one from a working environment.

  Concerning

  Celvin

• VSphere Web client and client heavy cannot connect to Vcenter server 5.5, web client fails with 2032 error before the connection, then the work after one minutes ferw.

  Hi all

  I really need help here.  I have a new installation of Esxi5.5 and installed the server vcenter build 5.5.0.5201 device 1476389.

  I have host files properly configured for DNS and Server 2008 R2 running that I use to connect with the client or web client heavy.

  Initially, I get an error with the web client to connect, he began to paint Vmware and when it comes to 'r' in the name it fails with #2032, so I can no longer

  access the page at all, he says: connection refused for the page. If I wait a while I can connect again.

  heavy client vSphere fails at this time as well.  However, I cannot communicate directly with Vsphere client to server esxi host and it works all the time.

  There seems to be a problem with the device of vcenter server because the thick client fails, and does not open a backup program using vcenter server

  inventory when this happened.

  Please help, it drives me crazy...

  Dan

  Hello

  Since I found the solution to the problem of connecting to the device of vcenter.  It is a conflict of IP address on the network.  There was a machine with the same IP address virtuall

  as the vcenter server.  This caused intermittent problems etc.. Why web client would still work if I have the vmware client open I do not know

  so thank you for your help.

  Dan

• Not allowed to connect to the virtual machine after archive / installation of the Tiger

  I made an installation of archive / install OS 10.4 as part of the maintenance of the system. Today, VMware does not connect to the virtual machine and wants me to check my right to use the program and its directories.

  I recently bought VM Fusion and bought the license / registered. Something to do with installing the OS, maybe, but everything else works well.

  I don't have reinstall Fusion as part of the installation of archive / install.

  I would say that (this will not affect your VMS) because it is an easy thing to do and should decide on problems of permissions on the application itself.

• JavaScript allows you to change the value of the page element?

  How to use JavaScript to change the value of the page element?
  I can read the value of the page element.
  
  I can change it by JavaScript?
  
  Thank you.
  
  David

  Depends on what is the type of page element - for text/no Select something like:

  function setValue(){
    $x('P1_FIELD').value = 'Oracle';
  }
  

  For a select element, something like this:

  function setSelectValue(){
    html_setSelectValue('P1_SELECT', 'Oracle');
  }