No network card after reinstalling Windows XP SP3

Similar Questions

• XPS M1330 can not find network card after reinstalling Windows Vista

  Hi all

  I'm passing my computer to a member of his family and wanted to give them a new installation, so I used the disc of Windows Vista (32-bit SP1) shipped with the laptop and reinstalled Vista on the computer. Everything worked fine until I wanted to connect to the internet, then Windows tells that there are no available networks. When I chose "Why doesn't windows find all networks" he stated that "this computer doesn't have a wireless network installed and configured card". I put in the Dell driver and Utilities CD that shipped with the computer and installed the drivers which seemed related to networking or communications, but the problem persists. I guess it's some sort of driver problem (as the computer used wireless before the reformat (a few hours ago) and so the device itself seems to work.)

  I would greatly appreciate any help to get this race. :)

  Thank you!

  Hi Chris,

  Please share the system model and the operating system installed on your computer?

  If you are facing problems with the wireless, you can follow the steps below to check if the drivers are listed as installed in the Device Manager:

  • Press 'Windows' + 'R' key on keyboard.
  • Type "devmgmt.msc" into the box run without quotes.
  • In the Device Manager window, expand network adapters and verify if your wireless card is on the list.

  If the wireless driver is not present in the system and is displayed as a network controller in the section other devices with a yellow question mark, you can download the drivers from the link: http://dell.to/QjjZDA -> Enter-> the serial number of your system, select the operating system-> expand the category network to download/install wireless drivers

  I hope this helps. Please respond to the findings.

• No network access after reinstalling Windows, then the network drivers HP/ralink 'correct '.

  Hi all

  I just reinstalled Win7 ultimate x 64 on my new HP Pavilion h8 - 1360t.  As not expected, no network.  So I ran the installer of ralink (sp57502) to get the driver of network adapter installed and rebooted and still no connection.  I tried the update ralink (sp58084) which is also on the page of the HP driver for this machine.  Still no luck.

  I am connected to the ethernet port on my machine that I've always been - I don't like the wireless right now (but it is not available either).  This Setup has worked well on the new machine until I reinstalled Windows.

  I knew that this was not apparent, but just in case, I tried to reset my modem and router, and it changed nothing.  Both work well for this older machine, I am on now.

  As you can see below, it's a driver issue any.  Windows has automatically detected and installed the "802.11n Wireless LAN Card" you see there... but it doesn't really seem to be available.

  I installed the ralink drivers and rebooted so many times that I'm sure I'm missing something else.  There is no other network driver for my machine on the HP site (other that a Broadcom who abandons install because it is not the material I have).

  Any ideas on what I'm missing?  Thank you!!

  

  Hello:

  What are the drivers for your wired network adapter.

  Click on the link below and select AR813x_AR815x_v2.0.14.15_WHQL or AR816x_v2.0.14.15_WHQL under the headings AR813x_AR815x or AR816x.

  They are in. RAR format, it must extract the driver using WinRAR or 7-Zip.

  http://www.QCA.Qualcomm.com/corporate/content.php?NAV1=146

  Your screenshots did not come through the wireless card so I don't know what you've posted.

  What I want for you is to copy and paste the material ID's for your network controller.

  Click it and then click the Details tab.

  Now, you see a drop-down list of properties. Drop down on it and select the second element (Hardware ID).

  After the first string of characters you see in the window.

  Paul

• wireless adapter network missing after reinstalling windows

  I am a newbie.i I reinstall my Presario CQ57 window 7 Home Premiun 32 bit and since these drivers are missing.please someone help me.

  Ethernet controller

  PCI\VEN_10EC & DEV_8136 & SUBSYS_3672103C & REV_05

  PCI\VEN_10EC & DEV_8136 & SUBSYS_3672103C

  PCI\VEN_10EC & DEV_8136 & CC_020000

  PCI\VEN_10EC & DEV_8136 & CC_0200

  Network controller

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C

  PCI\VEN_10EC & DEV_8176 & CC_028000

  PCI\VEN_10EC & DEV_8176 & CC_0280

  PCI device

  PCI\VEN_10EC & DEV_5209 & SUBSYS_520910EC & REV_01

  PCI\VEN_10EC & DEV_5209 & SUBSYS_520910EC

  PCI\VEN_10EC & DEV_5209 & CC_FF0000

  PCI\VEN_10EC & DEV_5209 & CC_FF00

  PCI Simple Communication controller

  PCI\VEN_8086 & DEV_1C3A & SUBSYS_3672103C & REV_04

  PCI\VEN_8086 & DEV_1C3A & SUBSYS_3672103C

  PCI\VEN_8086 & DEV_1C3A & CC_078000

  PCI\VEN_8086 & DEV_1C3A & CC_0780

  SM BUS controller

  PCI\VEN_8086 & DEV_1C22 & SUBSYS_3672103C & REV_04

  PCI\VEN_8086 & DEV_1C22 & SUBSYS_3672103C

  PCI\VEN_8086 & DEV_1C22 & CC_0C0500

  PCI\VEN_8086 & DEV_1C22 & CC_0C05

  Try:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-96646-1&cc=us&DLC=en&LC=en&OS=4063&product=5173039&sw_lang=

  Concerning

• Help! I lost my "network cards" after reinstalling XP

  Hello

  I have re-installed XP and apparently deleted my drivers.

  I try to get my built-in wireless works... but I can't seem to do.
  I followed the instructions referring to go to Device Manager and clicking on the sign "+" next to "network adapters."

  Unfortunately, it - is - not "network adapters" listed.
  Where did he go... and how I get it back?

  "Ther is a"network controller"in the"Other devices"section - with a big yellow"? "" next... but nothing that said, network adapters.

  I - know - the modem wireless, used to work... but I can't get it to work.

  Thanks in advance for any insight and suggestions/instruction, you are able to offer.

  
  

• No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  Hello

  Know what type of network card you have and download the drivers of its supplier.

  It doesn't matter what it is always a good idea before re-install/upgrade to log on to the computer support page, download independent drivers from there and put them on a flash drive.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• HP Dm1 3025DX network controller drivers are not installed after reinstalling windows

  Hello

  I have a laptop HP Dm1-3025DX Windows 7 home premium 64 GB and after reinstall windows from the network controller and Ethernet controller both say the drivers for the device are not installed. I can't understand how to solve this problem or download either. I don't have access to the internet on this computer so I use another computer for this post, and I'll have to use this computer to download drivers also. Help, please!

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100668-1&cc=us&DLC=en&LC=en&OS=4063&product=5094553&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102448-1&cc=us&DLC=en&LC=en&OS=4063&product=5094553&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-90955-1&cc=us&DLC=en&LC=en&OS=4063&product=5094553&sw_lang=

  Judging people, see if they install.

• After installing windows XP sp3 do not work my motherboard drivers intel

  After installing windows XP sp3 my motherboard drivers intel do not work. My mother board D845 GLAD. What could be the problim?

  Try reinstalling the drivers for your motherboard chipset, you can check this link to download the chipset driver:http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Desktop+Boards&ProductLine=Intel%c2%ae+845+Chipset+Family+Boards&ProductProduct=Intel%c2%ae+Desktop+Board+D845GLAD

  Also, try to download the drivers from your computer manufacturer site... Their number is 800-936-5700, and they are open Monday - Friday, 05:00-21:00 Pacific, Saturday & Sunday, 06:00 - 15:00 PST. XD

• Network card works no-Windows home server on VMWare server 2.0.1

  I installed Windows Home Server on VMWare server 2.0.1 and the card in Device Manager Ethernet OS says "this device cannot start (code 10)". Device Manager shows AMD PCNET Family PCI Ethernet Adapter and the current drivers are also installed. I installed the Home Server by selecting other 32 bit OS in the virtual machine. Also, I removed the network card and reinstalled the adapter in the control panel of VMWare. It shows connected and I fixed it to connect at power on, it is also a bridge connection. I don't know what to do or check. I thought to reinstall the operating system by choosing server 2003 32-bit for Windows Home server is based on this. It's probably something simple. Anyone have any ideas?

  Close the comments.  Edit the vmx by hand file and change the line ethernet0.virtualDev = "vlance" to "e1000" (add the line if it does not exist).  Back-light the prompt and install the driver for Intel E1000 network map.

• Reinstall Windows XP SP3

  I recently reinstalled Windows XP SP3. Reinstallation was successful, however, I think having acquired a "drive F" that I didn't have before. This disc is only 3.14 GB. All downloads (for example. Microsoft Office) seem to default to this disk and the available disk space is so low that the download does not load. This disc also has software like Windows files that seem to be duplicated on the local C drive.

  Why is my Local Disk F?

  Why are there records that appear to be duplicates?

  How can I increase the size of this drive?

  Note: I have not loaded one of my programs and files, and yet I seem to be low disk space!

  If there is anything you want to keep it on one of the drives (don't forget!) then during installation you can choose to delete the partitions and just leave XP to create a new. In this way it will fill the entire disc usually.

  There are other ways to do it via diskpart tools or a third party to kill the partitions, but the installer can do it too.

• How can you recover files, folders, software and drivers after reinstalling windows xp family?

  original title: How can you recover files, folders, software and drivers after reinstalling windows xp family? Please help, I've lost everything!

  When the update Norton Internet Security 2009 to 2011 on reboot, windows cannot open.

  Root\systems32\hal.dll Windows prevented windows from opening.  My machine in a Dell dimension 8300.

  On a Dell website, I found a method of recovery if you can reinstall windows xp from cd.  I was able to do it, but lost all my files.  How can I recover all my fortune, images, software, drivers, etc.?  There must be a way to extract this information from the hard drive.  Any help is the material and can save my marriage!  Thank you.

  Hi MarkS_02127,

  Since you've reinstalled windows, you will need to re - install applications once again, you will be lucky (if you format the drive) data on your computer. You remember that location, it was in my documents? If yes it just open C:\Documents and settings and locate your old username, you will find your old desktop, Favorites and Documents.

  I hope this helps.

• How much time after reinstalling window 7 32 Home Premium it take before that receive updates?

  * Original title: update Windows 7

  How long after reinstalling window 7 32 Home Premium does it take before that receive updates.

  Should be immediately the minute that an Internet connection is detected. I would advise that you install updates Windows Update batch well. There are about 300 post SP1 updates, more if you have reinstalled the version Windows 7 RTM.

  My recommendation would be to install updates in batches, these 5 at a time, exclude the hardware/driver updates. Avoid installing a set of updates for Microsoft Windows and Office at the same time. Also, try to install the first small updates. Avoid installing things like the .NET Framework and SQL Express updates.
  Whenever you install updates (it's a chore, but it guarantees a more reliable experience). Try to start the Microsoft Office updates for programs such as (Word, Excel, Outlook, PowerPoint).
  Another thing, try to download the updates, and then install them. When you are prompted to restart, disconnect from the Internet and restart your computer.
  To proceed with the installation of additional updates.
  If the continuous computer to become unresponsive, try the following:
  
  You can reset the Windows Update components by running the Fixit on this page.  But if there is malware present, she will continue to reset the connection to the update servers:
  How to reset the Windows Update components
  http://support.Microsoft.com/kb/971058
  Suggest you download and save the Fixit.  Then configure the system before the clean boot by running:
  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7
  http://support.Microsoft.com/kb/929135
  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously.  Now run the Fixit and choose the default mode.  Restart once it's done and see if the system can be connected to the update servers.  If he can't, then rerun the Fixit and choose aggressive mode.  Turn it back on when he finished the race and updates.
  I suggest before you stop and install the updates, disconnect from the Internet, first.

• Received error 0xC004F063 after reinstalling Windows 7 on a new hard drive for laptop even. Help

  I have connected my pc today and noticed that my activation stated that my product key is not valid after several months of use!  I always been updated on system updates and activated the pc after reinstalling windows 7 ultimate on a new hard drive.  I receive the error 0xC004F063 of the activation process.  This indicates that the BIOS is missing a required license.  I contacted Microsoft by phone and by the representative of the India was not attentive and no help at all!

  All I want is my key is valid again so that I can continue on with the help of my pc normally.  Help, please!  I have a genuine Windows 7 Ultimate key and it has been installed on a new SSD for the same computer laptop that I use the key.

  Click Start, right click computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link change product key

  Enter the product key located on the COA sticker at the bottom of the laptop and click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

• After Reinstalling windows 7 stopped opening PSD files.

  After Reinstalling windows 7 has stopped opening some files PSD files. I try to open them with Photoshop version 6, it does not work. I tried to open them on the laptop, same garbage. Tell me what is the problem. And how to fix it. Thank you.

  Maybe these files have been corrupted. I can't say how it happened, but it is quite possible. And the files are no longer open, immediately after reinstalling windows? Or not?

  If so, it is very rare in my opinion. You are very unlucky. Try to reinstall photoshop. Then check that these files have been opened or not. In the opposite case. Then the only solution is a special software. I would use this program http://www.photoshop.recoverytoolbox.com/ on your site

  (it is not free but is very good and is not expensive. But in the future you will be immune to such situations. )

  So you can learn more about your problem here: http://www.filerepairforum.com/forum/adobe/adobe-aa/photoshop/207-can-t-open-a-psd-file-th rough-photoshop

• Can not use the wireless network card after the upgrade to Windows XP Home SP3 on Satellite Pro 4600 edition

  Hello

  This is my setup
  Computer: Satellite Pro 4600 model ps460e 02hyt en
  Operating system: Windows XP SP3
  Mini pci wireless lan card: pa3070u - 1mpc mpci3a-20

  My problem:
  The operating system has been improved in win 98se to windows XP SP3.
  The mini pci wireless lan card does not work I try to download the right drivers but I have a big problem all driver downloads does not work. I don't know the physical name of the Council.
  Where can I find a solution for the update of these drivers? Is it possible that the mini pci wireless lan card does not work with windows XP SP3?

  Please I wait your help

  Thank you

  [email protected]

  I imagine that it will be compatible with SP2 well. You can test it please and post the result?