No Option to play the WAV file.

Similar Questions

• Windows Media Player 12 is not correctly play the .wav file.

  
  

  • Windows Media Player 12
  • Error message: Windows Media Player has encountered a problem while playing the file.
  • I can play .wav file one by one, without any problem. But when we want to play as a selection with a lot of .wav file inside, he stops playing and leaving an error message like above. There is nothing wrong with my files, I can play even on my phone (Windows Mobile) or any program of music player. That's why I think it was lack of Windows Media Player 12.
  • Here are the files. http://French.about.com/od/pronunciation/a/alphabet.htm You can download and test it yourself. It is the French from a to z alphabet.
  • I bought Acer, Aspire 4745 G laptop. It comes with Microsoft Windows 7 Home Premium 64 - bit, pilot of the last manufacturer installed, updated the OS to the latest version through Windows Update.
  I want that Microsoft to resolve this issue through Windows Update.
  +++ How to change font style of my post? It is very difficult to read. +++

  Hi WildRavin,

  1. run the troubleshooter in the Windows Media Player settings. Troubleshooting looking for issues related to playback of audio and video files in the drive by checking its configuration and network parameters.

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  2. If you have installed any third-party codec or plug-in for Windows Media Player, uninstall them temporarily to check if they are causing the problem.

  3. turn off audio enhancements and check the results. You can check the link for the steps below: How can I stop my music skip or break down when I play it? :http://windows.microsoft.com/en-US/windows7/How-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• all of a sudden I can't get wilndows media player to play the wav file it says it can't find the file, but it is in my email - neve has had this problem before

  I have service pack 3 installed.  Follow-up acvice on verification of protocols in case of problems, but they were all checked.

  Save the file on HD and then read it - it works?

  See you soon,.

  Jerry

• I can really play a WAV file, that I have loaded on my Clip +?

  Hello, I can't tell clients and/or manuals if the WAV files are supported and can play on my new Clip +. I load a wav file, but I can't seem to play. I went to the folder view and tried to play, but nothing happened. Is picked up, and, if so, do I have to follow a specific convention to name the file?

  I know it is a great MP3 player, but I have a specific need to play WAV files.  We strive to save a band on a small portable recorder (Zoom H2) and I would like to insert the card in the Clip + to leave the band and others hear recording (rather than reading on the Zoom - it wears the batteries).  We would use a micro SDHC with adapter for Zoom.  We will not have a laptop to help and there is no stereo system to play something on - for those who are not options.

  Any advice would be much appreciated.  It's our very first MP3 player, and pilot error is very likely.

  Thank you.

  I received the following information from Edward Mariano to SanDisk support:

  The Sansa Clip + saves files as. WAV files and would be able to play on the player. However. WAV files that are transferred to the Sansa from a different source player would not work. The Clip + does not support. WAV files originating from a different source.

• HELP - read file that VI does not stop at the end of the WAV file

  Hello

  I am a beginner and I'm working on a project that opens a .wav file and it plays (with volume control). I found all the associated examples sounds extremely useful and I can just edit the audio file to output.vi his example to my project.

  I'm running into a problem where the vi does not stop at the end of the wav file, and it seems for a while loop. the wav file I am using ended a long min (and it has been converted to a data file in a wav file, if it matters). I have attached my vi modified here and appreciate any help.

  Thank you!

  Christy

  The OP and the æ OR

  Please go to help on the toolbar. Then select examples and search for sound. Locate the sound file "for his Output.vi.

• I get error C00D10D1 in Media Player 11 to play a .wav file.

  original title: I am getting error C00D10D1 in Media Player 11, running XP Home. try to play a .wav file. Suggestions? Thank you!

  I get this error message, "an audio codec is needed to play this file. To determine if this codec is available to download on the Web, click Web help. "(I think it's C00D10D1 error?).  Using Media Player 11, running XP Home while trying to play a .wav file. Suggestions? Thank you!

  Dale

  Hi DaleRuss,

  Yes, there are 3rd party codecs available and can solve the problem. Be carefully what (x) you download from.

  NOTE: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• How to play the video file from Gigashot A40FE?

  I have 40 GB A40FE cam gigashot.

  I can't able to play the video file from this cam. no support for the folder.

  Please give me answer.
  How to play that format or I want to convert or download any player for whom?

  Hello

  Have you tried to read this file using the VLC Player?

  It is a small player and the best is that it is just for free! :)
  He plays most file types, and I think that you should test.

  See you soon

• Read the wav file

  Hi all

  is it possible to play a wav file and then treat it?

  Thank you

  I give an example that might, greetings

• Windows Media Player will not play the .tivo files

  WMP 11 will not play the .tivo files.

  WMP 11 will not play the .tivo files.

  Find out if the next thread helps you: -.

  Windows Media Player cannot play the file

• Windows Media Player won't play the .zip files. How to see or play these files?

  Media Player

  Windows Media Player won't play the .zip files. How to see or play these files? I'm 67 and not tech savvy thanks for the help.

  Hello

  ZIP files are compressed, so you need to unzip and then play the content if the
  content is of type WMP files.

  Compress and uncompress files (zip files)
  http://Windows.Microsoft.com/en-GB/Windows7/compress-and-uncompress-files-ZIP-files

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Media Center won't play the .wtv files

  Windows vista 64-bit with amd processeor will not play the .wtv files in media center. play dvr.ms file very well.
  But if I try to read a .wtv file I get nothing.

  Have you installed PlayReady DRM? This is required to watch WTV. Never underestimate your own stupidity.

• Huge problem, cannot delete the WAV file.

  I have the WAV file on my desktop that I can't move, delete, rename or the properties view.  It is a way by using 100% of my CPU and slow down at all.

  Whenever I try to delete it, it says "preparing to recycle...". "and never finished.

  I'm about to reinstall my operating system because I don't know any other solution.

  Hello

  Run the check point kill too extreme.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER THAT you are sure that the machine is clean of any malware.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows Media Player cannot play the protected file. The player has detected that the connection to your hardware might not be sure

  I just bought the New Avengers movie with the digital copy. I moved it and now I can't watch it. I have "Windows Media Player cannot play the protected file. Drive detected that the connection to your hardware may not be safe. "when I click it. What now?

  Hi Jason,

  Thanks for asking this question to Microsoft Community.  I'll try and help you resolve the problem; However, I will need to ask you a few questions.

  Are you able to play other movies without any problem? Have you done a recent software or changes to the material on the computer?

  Here is a link with some good steps. Go through it and check if it helps. Also check out this article and see if it helps.

  Also, see the steps in the article and see if it helps.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file.  I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for

  When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file. I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for these files. What can I do to be free from this error?

  OSstatus = error-37

  Note that this a Mac operating system error.

  http://forums.CreativeCOW.NET/thread/145/865447

  Error when importing the file: slash or other character in file name

  http://forums.Adobe.com/message/3729601

  The build error: slash or other character in file name

  http://forums.CreativeCOW.NET/thread/145/868994

  The build error: complete startup disk

• Problem with redirect after save the wav file

  I have a photo booth / audio that we created with flash that take a photo and record then it records audio testimony and records it.  My problem is that, once the wav file is saved, I want to redirect them to a thank you page but can't seem to find a way to do it.  Here is the code that I use to manage the registration of the wav file.

  private void recordComplete(e:Event):void

  {

  var request: URLRequest = new URLRequest ("save - file.php '");

  var loader: URLLoader = new URLLoader();

  request.contentType = ' application/octet-stream ";

  Request.Method = URLRequestMethod.POST;

  Request.Data = recorder.output;

  Loader.Load (request);

  navigateToURL (new URLRequest (redirectPath), "_self")

  }

  I tried to add the navigateToURL at the end and it sends to this page correctly, but the wav file is not saved.  I was wondering if there was a way to determine that the file is saved and then redirect to a thank you page?

  Thanks in advance!

  -justin

  replace

  public var redirectPath:String = "http://localhost/thankyou.html";

  with

  not sure that this should be public but it won't matter for testing.

  public var redirectPath:String = "http://www.adobe.com";