No output from the console with 10.0.9

Similar Questions

• More prompt not appearing is not on the output of the console with Hyperterminal

  Hello

  When connecting a PC running hyperyterminal on the console of an old Pix 515 firewall port that the output of all commands if poster in a raw without the ususal calls to <--more-->.

  With some PCs, the output is blurred as soon as she leaves the main hyperterminal window, which prevents the fast visualization of the configuration.

  Is this normal?

  Thank you for your help.

  This is possible if someone has defined the lines in the pager on 0. This indicates the PIX to scroll through all the outputs without the prompt '- plus -'. Deliver a "cl"pager"on the PIX and see if it does not help.

  Scott

• Need to buy a cable from the console to a SRW248G4

  I have a client with an installed SRW248G4.  We are unable to determine the IP address assigned to the switch and we need configure ports.  The client cannot find the cable from the console provided with the unit and I succumbed to find where I can buy one.  Anyone have any ideas?

  Thank you!

  the srw248g4 uses a regular db9 console cable. You can buy at any hardware store, just to check if the device uses a female or male.

• Get the output of the console on Simulator BB10

  Is it possible to access the console (or at least the stderr) output a basic NDK application deployed to the simulator of th?  I tried telnet in the Simulator to run it, but the devuser does not have permissions on the files of the app.

  Or maybe is there a log of debugging as for Android?

  I would like if possible, avoid using the IDE for this.

  You don't actually run the console application, but you can use command line tools to look at the output of the application log.

  Basically SSH into it (it is not really Telnet) and navigate to the folder of the application under the/accounts/1000/appdata /... then run "tail-f newspaper/journal" after the launch of the app, or just "cat/journal of newspapers". If the output you are interested is no longer attend balls/journal because of the new substance slogger2, you would use a variant of 'slog2info w' instead.

  You are quite correct that attempting to run the application from the console did not give him the same environment and except in a very few cases, it serves no real purpose.

• How to block the site from the db with Mozilla?

  How to block the site from the db with Mozilla?
  I noticed this file is blocked by some customers of Mozilla. Is this possible to Mozilla software and security settings?

  On another machine it works but the other cannot be connected to the database. This puts inside Mozilla technical possible?

  See:

  • http://KB.mozillazine.org/Parental_controls

• How to use the adapter from the wall with my Mac Pro laptop?

  How to use the adapter from the wall with my Mac Pro laptop?

  The AC wall connector is not compatible with the outlet on the MBP?  As the MBP charger will work from 100v to 240v, a transformer is necessary.  You need a converter that connects to the power outlet home and is compatible with your MBP.  You can buy the Apple travel kit:

  http://www.Apple.com/shop/product/MD837AM/A/Apple-world-travel-adapter-Kit

  Or you can use a single specific converter for the geographical area:

  http://www.Amazon.com/orei-grounded-universal-adapter-Singapore/DP/B004SCSV2U/re f = sr_1_4? ie = UTF8 & qid = 1460735377 & sr = 8-4 & keywords = us + in + uk + power + adapter

  (it is a UK USA example)

  Or you can get the converter that adapts the charger directly:

  http://www.Amazon.com/HIOTECH%C2%AE-extension-charger-connecting-specification/d p/B00MA48JZW/ref = sr_1_3? ie = UTF8 & qid = 1460735486 & sr = 8-3 & keywords = us + in + uk + power + ad aptor + apple + charger + cord

  (again, this is for a UK plug.)

  Ciao.

• Save the selected value from the ListBox with its respective values control tab dropdown selected in another list box

  Hi all

  I'm doing a vi where I save the selected value from the ListBox with values respective tab control dropdown selected in another list box. Whenever I select Item1 can change of course and the respective tab will be open for this element. But now I want to just save the selection and put it into another ListBox.SO I can't renmove or add my wishes. Please help me.

  It will work.

  Probably not the greatest solution well.

• How to print a QString on the console with qDebug()?

  Hello

  I print out the string of newspapers on the console with the method

  qDebug ("planned method of working"); and it works very well.

  but when I use

  qDebug (contact.firstName ());  It displays error (no matching function for call to qDebug (QString)')

  contact.firstName () return QString

  Any help? How the journal of QString...

  qDebug()<>

  or

  qDebug (contact.firstName () .toUtf8 ());

  To print several variables:

  qDebug()< "name"=""><>

  Remove spaces between them:

  qDebug () .nospace)< "name:="" "=""><>

• How to export data from the table with the colouring of cells according to value.

  Hi all

  I use jdeveloper 11.1.1.6

  I want to export data from the table with a lot of formatting. as for color cells based on value and so much. How to do this?

  You can find us apache POI-http://poi.apache.org/

  See this http://www.techartifact.com/blogs/2013/08/generate-excel-file-in-oracle-adf-using-apache-poi.html

• Can someone help with the problems of email account? Messages from the console?

  vcyman , March 9, 2016 13:16

  I had ongoing issues with my Mail months including Spindumps and just doesn't look good, so I changed the e-mail settings in the past according to the directives of the ISP, but now the incoming server is grayed out, more it's time to see if my overall situation needs some changes. As I am researching the current issue of the evolution of the e-mail settings, I see the information that can be linked to a larger problem, so I'm including that in a larger context.

  I use my Web site for most of my email accounts and received error messages indicating that the certificate is not valid. I contacted Hostway and learned that they have their own encryption and don't require SSL, but they said Apple mail works best if I use their specific settings instead of those I have. The server settings entering my accounts existing messaging site are shaded out and immutable. What is the best way to make changes without causing more problems?

  I tried to move the mail account plist.to the trash and restart hoping that would disable the accounts but it didi not work. Or I sign out to iCloud and make changes?

  MORE INFORMATION

  In/Library/Application Support / Mail / Online Account Types/com.apple.updated.mailaccounts/MailAccounts.plist, the Account.plist includes an e-mail account which is Ameritech and not logged into my site.

  in Library/Mail/it is V2 and V3. V2 is V2/MailData/Accounts.plist. V3 contains no Accounts.plist. in MailData. I printed the Accounts.plist. and there are 22 pages of data. Each e-mail account is repeated at least three times and it seems connected to the when I made changes to the account settings in the past.

  This may be related to a larger problem because I have error messages related to the e-mail in the console.

  09/03/16 12:05:22.644 PM cloudd [429]: error SecOSStatusWith:-[50] error Domain = NSOSStatusErrorDomain Code =-50 'query lack the class name' (paramErr: error in user parameter list) UserInfo = {NSDescription = query missing class name}

  09/03/16 12:05:22.648 PM DCs [365]: securityd_xpc_dictionary_handler cloudd [429] copy_matching error Domain = NSOSStatusErrorDomain Code =-50 'query lack the class name' (paramErr: error in user parameter list) UserInfo = {NSDescription = query missing class name}

  09/03/16 12:05:22.648 PM cloudd [429]: error SecOSStatusWith:-[50] error Domain = NSOSStatusErrorDomain Code =-50 'query lack the class name' (paramErr: error in user parameter list) UserInfo = {NSDescription = query missing class name}

  09/03/16 12:05:22.649 PM Mail [634]: cannot load the draft for documentID: C265D900-C6A3-48B9-AF60-C83FE29A7AED

  09/03/16 12:05:22.705 PM Mail [634]: cannot load the draft for documentID: E1D3029B-C2BF-425E-8F67-32C190B420CF

  09/03/16 12:05:23.142 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 12:05:23.144 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 12:05:23.417 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 com.apple.AddressBook.InternetAccountsBridge [501 12:05:23.432 PM]: looking for iCDP status IDDM 61149625 (checkWithServer = 0)

  09/03/16 com.apple.AddressBook.InternetAccountsBridge [501 12:05:23.435 PM]: error XPC while checking if iCDP is enabled for IDDM 61149625: error Domain = NSCocoaErrorDomain Code = 4099 "the connection to the service named com.apple.cdp.daemon was invalid." UserInfo = {NSDebugDescription = the connection to the service named com.apple.cdp.daemon has been invalidated.}

  09/03/16 com.apple.AddressBook.InternetAccountsBridge [501 12:05:23.435 PM]: connection Daemon invalidated!

  09/03/16 com.apple.AddressBook.InternetAccountsBridge [501 12:05:23.436 PM]: [AOSAccounts]: [__49-[ACAccountStore (iCloudAccount) icaAppleAccounts] _block_invoke]: accountsWithAccountType returned the error: Domain = com.apple.accounts error Code = 9 '(null) '.

  09/03/16 12:05:23.446 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 12:05:23.716 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 12:05:24.076 PM sandboxd [139]: com.apple.Addres (501) ([501]) deny com.apple.cdp.daemon mach-search

  09/03/16 12:05:24.626 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 12:11:40.263 Safari [624] PM: KeychainGetICDPStatus: key :-25300

  09/03/16 12:11:40.263 Safari [624] PM: KeychainGetICDPStatus: status: power off

  09/03/16 12:49:52.821 PM Mail [634]: * the Assertion failure in French-[IMAPParseContext _parseStatusResponse], /Library/Caches/com.apple.xbs/Sources/Mail/Mail-3112/IMAP/Connection/Responses/ IMAPParseContext.m:956

  09/03/16 12:49:52.821 PM Mail [634]: exception IMAP response analysis: tried to parse a response from status without knowing the separator character.

  I'd appreciate any suggestions.

  Is your IMAP account?

  You have stored messages slot "on my Mac"?

  If create you your account in a new user, it works correctly?  (see below)

  See my answer in a similar debate. Let me know if you need more assistance.

  Re: The first time to open Mail.app: opens the window Import Mail Message - crashes during the infinite-import cycle how to break it?

  Re: Certificate error. When the message appears you must choose "see the certificate", then select "always Trust ' in keychain."

  CREATE A NEW USER

  Go to system-> Preferences, create a new user in users and groups.

  Place in the new user by logging in under the Apple in the menu bar.

  Log in to the new user.

  You can skip the connection with an Apple ID, unless you want to test an iCloud account. Select continue, then jump.

  Open Mail and add your account. If it's a POP account, make sure that you do not select "remove copy from server after retrieving a message," on the Advanced tab.

  

  You still see the issue?

• Need help with commands from the console.

  Guys,

  I'm discovering nuer console which is attached to a particular hba.  I have connected to the console and you have run the following command

  cat/proc/vmware/scsi/vmhba1

  It returns a message saying something like "this is a directory" now all I have is a blank screen with a blinking cursor and I can't go back to the root.  Can someone help me to pease keep in mind Im these commands do not at all know.

  Thank you.

  ... try with CTRL + C or ": q!"

  CAD commands reference

  Bye bye

• Tecra A8 and Adv Port Replicator III - no audio output from the port replicator

  I have a Tecra A8 anchored on an Advanced Port Replicator III. All ports (network, USB, video) with the exception of the AUDIO ports seem to work well. I can get sound from the headphone jack on the front of the A8, but nothing since the station docking ports. Is there a docking station driver or something I need to install to get the sound from the docking station not the laptop?

  Hello

  The Advanced Port Replicator III supports the line and line port left.
  As already suggested by user above; Check if you are using the command-line output port!

  Welcome them

• Rooms disappear from the Console of the room

  Hello

  I have created spaces, and then sign out. Once I connect to his party. I know the House exists, but I don't see it in the console.

  No help no refreshing.

  It would also be nice, enter the name of a coin and enter and do not have to select in the list (in the case that I have a lot of parts)

  Thank you.

  .. .Russ

  You are probably more than 1,000 rooms and we only list the first 1000.

  I agree that we should have at least a way to choose a room or have a way to paginate between rooms. We will add it to the feature for a future release requests.

  You try to access the room with RoomConsole or DevPortal? (none of them works correctly with large games room, but most of the operations available in DevPortal can be made by using the scripts on the server (which can be run from the command line) side.)

• Local database not accessible from the console of the enterprize Manager

  Hi all.. I have a strange problem, please help
  
  I have installed hv oracle 9i on my pc. It is related to a db server and a local database (for scott schema) is also installed on the pc. with console of oracle enterprise manager, I was and want to access the two databasses. (db server and local)
  I can access the database server of db as sys: attributes are...
  
  Host: 10.4.34.59
  Port: 1526
  SID: grid59
  
  attributes for local db
  ---------------------
  Host: e5687g7665
  Port: 1523
  SID: ora123
  
  the two dbs are accessible from sql plus, but when I write scott, tiger on the console, it says 'no listener'... on the net manager oracle I HAV already added the address for pc local db.
  Thanks in advance, please help

  Hello
  It's very strange, using tnsping you get the listener, so I don't understand why sqlplus returns 'no listener '.
  You have run the tnsping and sqlplus from the same computer and same ORACLE_HOME, right?
  You have several installed Oracle customers?

  Liron Amitzi
  Consultant senior s/n
  [www.dbsnaps.com]
  [www.orbiumsoftware.com]

• Why am I unable to print from the web with Firefox (my favorite browser) and it market with IE?

  Hi, thanks for your time! I have problems printing from FireFox. I use PayPal for print shipping label (I sell on Ebay) and he's a few weeks that I have to use IE to print from the Internet. Nothing is printing from Firefox. And since it is my browser FAVORITE, it's boring. I have the latest Java, reinstalled my drivers (uninstall and install fees). I've tried everything I can think of, but nothing seems to work. Update Java, reinstalled drivers for my Epson Styllus NX215, change USB port, cleared cookies and all things... It works with Internet Explorer. I have to use Internet explorer to print from the Internet... Can you help me to not use IE anymore?

  (o) thank you.

  I use a computer MDG with an Intel CoreI7, with Windows 7 Home premium (64-bit) SP1, 8 GB of ram

  Thank you very much, I already did. It didn't work... the problem is solved by uni at a standstill and re-install Firefox. (the update does not work).

  Thanks anyway
  Stephan.