No preview in the monitor Panel

Similar Questions

• The monitor Panel is of 2 different colors

  Hi, I just installed 10 PRE-Photoshop 10 and I opened my film project that I was working with PRE 9.

  I noticed that sometimes, when it begins firstly I see a screen in the project with a foreign language is displayed then it disappears and my regular video shows but the video in the monitor Panel is of 2 different colors.

  Divide into the orange middle of half the other green. I also see "Purple" and regular.

  I use Win7 64 on a new pc, I've built:

  ASUS Rampage 3 Extreme MOBO

  Quad Core i7 950

  12 GB of RAM of 1867 Mhz Dominator

  2 ASUS EAH 5850 TOP / SAY in crossfire

  4 TB WD Caviar Black hard drives

  23 '' Samsung SyncMaster XL2320 monitors HD 2

  I ran this system for about a year with no problems at all.

  I also updated the video drivers etc, and the only place where the video is messed up is the monitor Panel.

  Any ideas?

  THX! Matt

  Thanks for the ideas.

  I checked this morning before work and the monitor Panel is still split on some video segments.

  I will cancel the first crossfire configuration and hang individually monitors for video cards and see what happens with that. Then I'll try just on monitor hooked up but I doubt that's the issue. I also think to Quicktime settings/reinstall.

  Will let you know everything that happens.

  I hope you had a good action of grace!

• Why my video clips will run too fast when played on the monitor Panel?

  I posted my problem earlier today, but in re-reading it maybe I didn't explain well enough.

  My main question is: "why my video clips will run too fast when played on the monitor Panel.  It comes from occurring after I selected my media in the Panel tasks and placed in the correct order in the Timeline/timeline.  I knew something was wrong when I saw that the clips did not indicate their right length when it is displayed in the timeline (scope).  They have been compressed in only a few seconds, then the clips should have at least 5 minutes.  I ran the clips in the monitor and of course they ran too fast, with a lot of jerking movements.

  3 video clips, I'm doing a PAL HD video taken with my Nokia N8 mobile video camera. Here in mp4 format. This may be a problem?  Note that when I play these individual HD clips on my computer (Windows Media Player) they work perfectly.

  After that I put the clips in my project Panel (or before in the work space organize), I have perforned no modification or manipulation of clips.  They are in their original state.

  Simply too check that the clips do not appear to be compressed, I burned a DVD, the resulting video ran in a few seconds.

  Help would be greatly appreciated.

  What is your project Preset?

  If you right click on the items in the project Panel, then choose Properties, which is displayed for the FPS?

  It could be that the FPS flag is not picked up by the GER, and if this is the case, you should be able to fix this by choosing to interpret the film and by changing the FPS to 25.

  Hope that helps and good luck,

  Hunt

• Problem with the monitor Panel and display driver - first Elements 9

  9 PE worked fine since I bought it two months ago and then this week I opened the program, he stated "we have detected an incompatible display driver. For better playback performance and faster, update your driver. View the details of the driver. ATI ASUS AH450 series 3.0.8673 technologies. Then when the open program of the monitor Panel was not working properly. If I click on the Panel, I can see an image of the video, but when I click to play the video, the sound works well, but nothing happens in the monitor Panel. It justs keep showing the same image without change.

  It was the latest driver but I reinstalled it just to be safe, and he still has the same problem. I have updated first Elements 9 but still the same problem. I am running the application on Windows XP.

  I'm at a loss to know what to do. Why all of a sudden he does it when it works fine?

  Try the suggestions of this FAQ from the library to the right of this forum:

  http://forums.Adobe.com/thread/769303

• Issue of the monitor Panel

  First timer here, so bear with me.  I imported my files, but the right part of the monitor Panel is enlarged.  I have the feeling that I narrowly missed a setting somewhere.  Can someone tell me what I did wrong and how to fix it?

  

  Two ways-

  -Default scale to the size of the frame in Preferences > general to apply to the items that you import, but not to the elements already present in the project. If you can set it and then reimport your images.

  - Or, preferably, select images (all at once) in the project Panel and go to Clip > video Options > scale to the size of the image. Then, they must conform to the size of the sequence when you add them to the timeline.

• How to fix the red, yellow and blue bars in the preview of the video Panel window?

  Until I upgraded to OS x everything was fine. After that this first began to display the color bars on the video, but only when he wasn't playing. If the video is less than 100% in the preview displays the color bars on break. She has a problem with one of the graphics (illustrator file) when it is rendered on. I removed it but it still has those stripes on break. If I play the video, everything seems fine. Someone at - it suggestions why it does this?

  
  

  

  Hi Aaron,

  See the link below.

  Program MONITOR BUG

  Vinay

• Video clips will play too fast in the monitor Panel

  I've been struggling for days with a problem:

  I took 3 video clips with my mobile Nokia N8 video camera.  Here in mp4 format.  When I play these HD clips on my computer it will work perfectly.  With this and with the help of Adobe first Elenents 9, I created a project.  I haven't made any manipulaion of time on these and have left in the rough.

  Seen in the editing mode they occupy on the seconds, and run in a few seconds, where, as they should be at least 4 minutes total.  I burned a DVD that confirmed they run fast.  Can someone tell me what I do wrong?

  See my response in the other post.

  BTW - until someone has replied to your message, you can always change it. In the thread pane, look to the right, more upward under Actions, and you will see the Edit thread. Who can save the double display. Now, only you, or a MOD can edit the message, and once responded to it, the Edit thread function is lost. Is the same in the responses - once answered to, Edit disappeared. In response, the button change is at bottom left of the viewing Panel.

  Good luck and hope that interpret the film will have what you need.

  Hunt

• Newbie: Pre 10 Clips will not play not (preview) in the monitor

  I am, I suppose, a beginner, because I haven't used at all first since v.6 and don't know for the most part with iMovie, Win Movie Maker and Corel Video Pro.

  I use PrE10 on computer of Windows 7 with 3 GB RAM and three recently defragmented or formatting of drives with at least 200 GB of free space.

  I use clips in Organizer as MOV files, and settings of the project have been properly adjusted to Standard DV.  The clips will play fine in the Organizer.

  In the first instance, by clicking on the button Play don't 'play' not the clip does not work (rotating circle) and don't go back to the Pause button that can be clicked to go back (in other words, nothing seems to be frozen).

  Dobuble-click on the thumbnail of media will launch the preview window, room can be clicked, but nothing happens.

  I'm SURE I'm missing a step.  Can someone tell me what this can be?

  1st, what version of Quicktime you have installed?

  QuickTime errors http://forums.adobe.com/message/4545437

  QuickTime X does NOT work http://forums.adobe.com/thread/888722

  ExporterQuickTimeHost http://forums.adobe.com/thread/1109614

  2nd, read Bill Hunt on one type of file as WRAPPER http://forums.adobe.com/thread/440037

  What is a CODEC... a primer http://forums.adobe.com/thread/546811

  What CODEC is inside of this file? http://forums.Adobe.com/thread/440037

  .

  A report with the codec of your file details, use the programs below... a screen capture works well for people to SHOW what you do

  http://forums.Adobe.com/thread/592070?TSTART=30

  .

  For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/

• How can I get the proxy box Preview in the navigator Panel to move outside of the canvas?

  After years using CS2, I just upgraded to CS5.5.  With CS2, I could navigate the photo mode view full screen as the angle of the photo was at the center of the screen.  With CS5.5, I have not been able to do.  Am I missing something?  Is this possible with CS5.5?

  Don't know if that's what you're looking for, but in the interface edition/preferences/it's options to open in tabs or as a document.

• Where did preview while the edging?

  When I segment a snippet that is less than another clip on the timeline I do not see a preview in the monitor window pane, since the update. This mess really my workflow to the top. When I have sex video clips on the other I want scrubb in videos as I prune them. For as long as I can remember this comes to be an automatic feature of first, now he's disappeared or disable or something. Now, it only shows the top tether or some clip is seen when the trim is started. It is really crippling my bad workflow.

  It reminds me of how to apply the default transition changed after an update. Now, the default transition applies to a selected clip or some other unexpected clip. Before, it would apply whenever the timeline indicator is. I want to know how reverse this change the default transition only apply including the timeline indicator. I guess that's an investigation for a different, new position...

  Click on the key in the timeline panel a clear Composite overview during the filling:

  

  MtD

• EPA 10 - screen white in the monitor during the video game - but all is well in the CS6 APPro

  Hello

  I have an Asus G75V, Windows 7 and Adobe Premiere Elements 10, as well as a subscription to Adobe Premiere Pro CS6 (with booster). All windows updates are up-to-date, also optionally (Bing, which I did not need to backup). I have the latest version of QuickTime (QT 7). Until today everything was fine, but now... Open a project in AP elements (so when I create a new) and get this message:

  We detected incompatible display driver. To get a better reading performance and faster, update your display driver. View the details of the driver: NVIDIA Corporation GEForce GTX 670 M/PCIe/SSE2 3.0.0

  
  

  By the way, I have the latest update of Nvidia installed, from their webpage (version 306.97). NVIDIA Web page after scanning my system says: GeForce GTX 670 M 306.97 your PC is currently the last driver for your GPU. No update driver is necessary at this time.

  
  

  Indeed, when I open the AP elements, in the monitor Panel, I see the image corresponding to the position of the cursor on the timeline, but when I press PLAY the image on the screen become white, I hear the sound of the film, but there is no picture color, just white. When I STOP the picture from the movie appears. The video is 1920 x 1080, 25 fps from a DSLR, Lagarith codec camera. The computer used to manage the size of the video without any problem.

  When I open another project in Adobe Premiere Pro or Encore CS6, CS6 alright, I see the picture and hear the sound.

  What I try to fix is the following: I reinstalled Adobe Premiere Elements; uninstalled the Nvidia driver; reinstalled the driver Nvidia, the latest version and also tried to revert to the previous version (306.23). Nothing helps.

  I found this: http://forums.adobe.com/thread/769303 but this isn't for EPA 9.0, 10.0 - I do not have the BadDriver.txt file

  This who could I do, please help?

  Thanks for the help,

  Michal

  Try what ishown in the link, then replace by 10.0 9.0: this folder name is the version number of the

  First Elements.

  To view the program data folder, you need to see the files hidden when using

  Windows Explorer. Then, you will be able to delete the file baddrivers.txt.

  Good luck.

  JM

• Need to zoom out to see the clips in the monitor of the Organizer

  Hello

  I'm working on a project with PAL AVCHD HD1080i 25 parameters. When I put a clip on the timeline, it is too much for the monitor Panel. Is it possible to zoom out in the monitor Panel, so that the frame is visible please?

  Yes. Right-click and select magnification > Fit

  

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

• Confused by the new lining Preview in the program monitor

  I am totally baffled by the new trim body CC 2015 preview mode and I would be happy to help. Let's say I have two video clips, staggered one above the other. If I select the change point of the clamp on the top rail and drag it to the right, extending the duration of the clip, the monitor of the program displays a preview of the clip I extend AND an overview of the the out clip is over. The strange thing for me is that the preview of the edit point I chose not to update in the monitor program and instead the preview of the clip on the bottom track updates, showing me that it is new to the point. In general, I want to see an updated image of the clip that I extend NOT just the clip it is potentially covering on a lower rail.

  Is this a bug? Or a 'new '? Can I disable?

  Thank you!

  I was too puzzled by this new default behavior. To have the screen divided into two while dragging an in or out point gave me a headache that I tried to focus on the right pane.

  You can disable it entirely by clicking on the drop-down list of the timeline (the wrench) settings and uncheck "Composite overview over the plate.

  After spending 30 minutes so scratch my head and looking for a way to disable this behavior, it would be wiser for this option under the 'Trim' preferences panel... or even the list drop down monitor settings...

• The front panel scroll, based on the size of the monitor

  Hi guys,.

  I built an exe file of a VI on a labview having machine so that it can be run in another has no labview. The machine where I programmed the VI has a large 22 "monitor and so I put on my face as a result. The machine that will use the exe file has a screen size of 15 ", and some elements of the front panel are not accessible if I make an enlargement. However if I don't maximize the screen I can move the window to the edge and access controls. But it's so heavy. Is there a way I can add scroll bars to the VI while I can scroll the front panel?

  Thank you

  Of course.

  Scrolls bars are something that you can turn on (and are normally enabled by default) in the dialog box properties VI of VI.

  In addition, it is usually best to design your sign before and that it is effective for the smallest screen size you expect that it runs.

• Connection monitor extra/DVI-I connection EVS-1464 (showing the front panel)

  Hello

  Developing a Vision System using the following:

  • LabVIEW 2010 SP1
  • LabVIEW 2010 SP1 real-time
  • Vision development 2010 SP1
  • EVS-1464

  My question is:

  How can I view my front panel, running on the Exchange virtual server on a monitor connected to the DVI - I output of the EVS-1464?

  Thanks in advance!

  Roy

  Hi Roy, I'm not sure if actually read Hossein that KB or not, but she deals with the display on the front panel on the network on a Windows computer, not on via the connection of the monitor on the Exchange virtual server running LabVIEW RT.

  To answer your original question, no, it is not possible to look at the façade of standard LabVIEW on the RT system today. All the code used to display all the buttons on the Panel before the user interface, controls, and indicators are simply not present in LabVIEW Real-time and is only visible on a separate computer that is running the development environment or by using a web browser that has the plugin installed LabVIEW.

  Have a display of the UI on RT is certainly a requested feature and it would be available someday. You can see this request: http://forums.ni.com/t5/LabVIEW-Real-Time-Idea-Exchange/Real-time-display/idi-p/1391108 . He has some good ideas for what other alternatives exist today also.

  However, it is a way to use the monitor on the Exchange virtual server and other LabVIEW RT systems output. Module Vision Development includes video RT on the screw that can display any image on the connected monitor. You can either display images captured from cameras or images custom overlay text and simple graphics objects (lines, circles, rectangles, etc.). It is certainly more effort than normal front panel editor in LabVIEW but it could be adapted to your needs if you want some things to be displayed. You will of course have no mouse/keyboard so that you cannot interact with any display of the elements directly.

  Eric