No product: choose the right laptop
I am looking for a small laptop for school, but can't seem to find the correct method please help...
Thease are the things, he must have;
1.a hard drive, if I can put wear hard microsoft on this issue
2. USB key
3. windows 8
4. more than 100 GB of storage (100 will do however)
5. touch screen would certainly be more useful, but I don't mind if it dosent
6. any size minimum 17 "
That's about it, I know that it is imposible to do, but I'm hoping to get one for under $ 500
Thank you if you answer this and sorry if I wrote anything bad.
123baker456 wrote:
I'm the Australia, and I don't have a phone to contact hp-doesn't this help
HP Australia e-mail your needs and they can tell you computer laptop that fits your need.
Tags: Notebooks
Similar Questions
-
Help me choose the right laptop model Linux Fedora compatible
Hello
Could you help me choose a laptop?
It must be:
(1) * compalible * Linux (Fedora 10/9)
(2) rather * lite *.
(3) Goog designed
(4) powerful
(5) no camera (optional)
--
Sorry for my bad English.It depends on the purpose of your laptop (eg. portability vs gaming). With respect to the components, peple might disagree with me, but I recommend to choose configurations Intel Centrino. This means that the a mobile processor from Intel, Intel Chipset, Intel Graphics and Intel wireless adapters.
The reason is that that Intel components usually work out of the box with Linux, Intel still provides open source drivers, even for the acceleration hardware 3d. Even if the yield is low compared to ATI or Nvidia.
I don't know, however, if a Toshiba laptop is the best solution. Computers laptop Toshiba have a large number of soft keys, etc. then you might be required to do a lot of tweaking.
-
HP pavilion 15-e034tx: how to choose the right RAM for laptop
How to choose the right RAM for my laptop (Pavilion 15-e034tx). I know I should buy DDR3 ram.
Are there other factors should I consider when buying one? I got 2 slots for ram, which od these combos are possible?
1-4 + 4 GB
2-4 GB + 8 GB
3-8 GB + 8 GBThank you
From the Manual:
Two customer accessible/upgradable memory module slots
Support for dual channel DDR3L (1600 MHz)
Support 8192 MB RAM system in the following configurations:
8192 MB (8192 MB × 1, × 4096 MB 2)
See page 53 for instructions. Memory access is easy via the service Panel. This is the part number for the approved 4 HP concert module:
4 GB (PC3L, 12800, 1600 MHz) 691740-001
A 8 GB module is listed in the manual, and it's a 3rd generation of processor i5 I suspect 2 x 8 = 16 concerts would work, but strictly following the manual your only option is to add a 4 GB for a total of 8. Most users really not more 8 GB and adding a second identical module will allow two-channel operation, so you should see a noticeable jump in the overall performance.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
-
4540 proBook s: how to choose the right network driver
Hello guys. I clean installed Windows 7 Professional. Now, I see that I can not connect my computer to the internet, so I need to install the network drivers. I wen to the HP website and saw that there are 19 different network for my laptop drivers.
How to choose the right method?Hello:
Below are the links to the ethernet and wireless drivers you need...
Wireless:
This package contains the installation package driver for Ralink wireless LAN controllers in the laptop models running a supported operating system.
File name: sp66089.exe
This card also needs a bluetooth driver...
This package contains the OS driver installation package for the Ralink Bluetooth in laptop computers running taken in charge.
File name: sp59632.exe
Ethernet:
This package provides the driver for the Ethernet Realtek controller in the laptop models running a supported operating system.
File name: sp63213.exe
-
Choose the right PC for PCIe-1430
It's the difference between PCIe-1430 and the PCIe-1429?
I already see this article:
Choose the right PC for the NI PCIe-1429
http://digital.NI.com/public.nsf/allkb/1FD6E5B5A08C1E0786256F9B0079D449
specifically, I want to know if anyone can share here the model of PC or configuration it uses with the PCIe-1430 framegrabber.
I want to know what pc should I have to connect 2 camera link card PCIe-1430.
Your help is appreciated.
Dear Moti,
I used the Dell Dimension 9100 and work Dell Precision 470 with the NI PCIe-1429 and PCIe1430, all two has worked well.
-Robert Eastlund
-
Please help me choose the right format mask
Hello everyone.
We use Oracle 11.1.0.7 RAC.
Please help me choose the right format for function to_char mask. On the left is a digital input, on the right is output desired:
NUMBER VARCHAR2
0,123 0.123
12345678-12345678
12345678.1234 12345678.1234
12345678.123 12345678.123
12.00000008 12.00000008
WITH data AS (SELECT 0.123 n FROM DUAL UNION ALL SELECT 12345678 FROM DUAL UNION ALL SELECT 12345678.1234 FROM DUAL UNION ALL SELECT 12345678.123 FROM DUAL UNION ALL SELECT 12.00000008 FROM DUAL) SELECT TO_CHAR (n) FROM data;
Thank you, Dmitry.
Hi, Dmitri,
Dmitry Dunaev wrote:
Hello everyone.
We use Oracle 11.1.0.7 RAC.
Please help me choose the right format for function to_char mask. On the left is a digital input, on the right is output desired:
NUMBER VARCHAR2
0,123 0.123
12345678-12345678
12345678.1234 12345678.1234
12345678.123 12345678.123
12.00000008 12.00000008
- WITH the data AS
- (SELECT 0,123 n FROM DUAL)
- UNION ALL
- 12345678 SELECT FROM DUAL
- UNION ALL
- SELECT 12345678.1234 FROM DUAL
- UNION ALL
- SELECT 12345678.123 FROM DUAL
- UNION ALL
- SELECT THE DOUBLE 12.00000008)
- SELECT
- To_char (n)
- Of
- data;
Thank you, Dmitry.
I don't think that TO_CHAR can do by itself. You should maybe call TO_CHAR and then manipulate the output a bit.
Looks like TO_CHAR with 1 single argument does exactly what you want except when it returns a string starting with a decimal point, in which case you want to concatenate a '0'. So call TO_CHAR with 1 argument, see if returns the string begins with a decimal point and, if so, put a '0' on it, like this:
WITH got_str AS
(
SELECT n
TO_CHAR (n) AS str
FROM the data
)
SELECT n
CASE
WHAT LIKES str '. %'
THEN "0". Str
Of ANOTHER str
END AS str0
OF got_str
;
Output:
STR0 N
---------- -----------------------------------------
0,123.123
12345678-12345678
12345678.1 12345678.1234
12345678.1 12345678.123
12.0000001 12.00000008
What do you want for greater than-1 negative numbers? You may need to make the CASE a little more complicated expression, like this:
WITH got_str AS
(
SELECT n
TO_CHAR (n) AS str
FROM the data
)
SELECT n
CASE
WHAT LIKES str '. %'
THEN "0". Str
WHEN the str LIKE '. %'
THEN '-0 "|" SUBSTR (str, 2)
Of ANOTHER str
END AS str0
OF got_str
;
-
FOR ADMINS - how to choose the right answer on a thread on this forum?
FOR ADMINS - how to choose the right answer on a thread on this forum?
For example, on:
"missing plug-in" for safari after you download!
http://forums.Adobe.com/thread/897677?TSTART=0
It does not show on 5.1 Safari and Firefox on Mac OS X 10.6.8 6.0.2.
Thank you!
The normal user (non-admin type), which can mark a reply as useful or appropriate is the user who started the discussion.
-
Choose the right model of project
I'm pretty handy with Primere Pro CS5 and a bit with After Effects.
Usually of digital HD work.
But when it comes to formats, well, it's something that I need to focus on learning.
I have a DCR-HC21. Records on Mini-DV tape.
I have a lot of videos I want to transfer them to DVD.
I am able to import video from the camera using firewire, in first Pro CS5.
However, I want to be sure I chose the right settings when
initially implemented for the project. For the best quality.
Any help would be great.
Try this:
warningAnd to better understand what is happening, look at this:
How to choose the right sequence settings?
Edit:
When you create a new project you are presented
with a setting of the sequence to the choice menu.
You can skip this step by pressing "Cancel", then import your media
and create the type of sequence that best adapts to your images. -
How to choose the right settings in pre 10 for videos I have?
I have Adobe first items 10 and you want to edit videos that I had received from a company that has transferred my Super 8 videos in format digital and saved on an external hard drive. They have the extension avi, codec Apple Motion JPEG A, image size: 1920 x 1080, pixel aspect ratio: 16:9, FPS: 29.97. I don't know what settings to choose from for the best image quality. I tried a few and the quality is poor. I need help. Thank you
Editing,
You HAVE found the right forum, and John and Steve are on the problem.
Now with MJPEG images, I normally recommend this ARTICLE (from the subforum tips & tricks), but you have a somewhat unique problem, because your film contains a specific CODEC, the Apple Motion JPEG CODEC.
Are you on a Mac or a PC?
I don't know if Apple QT Player installation also adds the Apple MJPEG CODEC, as is Apple's CODEC H.264 and a little more. If so, you should have the appropriate CODEC. Also, I don't know if Mac come with Apple MJPEG CODEC installed. Others will have to answer these questions. I have four MJPEG CODEC on my laptop. One was the MainConcept, I bought, installed with Canon G-10 my wife installed with its Lumix, and then there is another, which has probably been installed elsewhere. None of my friends (I have Apple QT Pro on the laptop) appear as Apple, but that last one might be
Can I change hardware MJPEG well enough (not as gently as SD DV - AVI, but still good enough).
Good luck
Hunt
PS - for telecine work, I got the 8 mm/S - 8mm digital images to tape miniDV (harder to find telecine houses, what to do now) and only use my Canon camcorder to capture those tapes on FireWire in first. Which works very well.
-
How to choose the right project settings?
I am new in taking video and modifying them. I bought a Sanyo Xacti HD camcorder and a lot of clips in my last trip. The clips are transferred to my count and have the format. Depth of MP4 1280 - 720 1280 and 29.97 frames per second.
I want to create after having been released on DVD I can show on my TV 16:9 (PAL Netherlands)
When I create a new project, I choose the seetings and I don't really know how to choose!
Should what project settings I choose in the settings I see that 30 fps under NTSC systems. Is there somewhere a general explanation how?
Help will be very appreciated!
Greetings Willem
Before the NTSC in PAL, I think that there are other major considerations.
1. you save the 16:9 720 p 30 1280 x 720 at 30 frames per second, using the MPEG-AVC/H.264 codec). Seems to me you are dealing with what they call "AVCHD Lite". If so, there are major problems of basic editing in first Elements 7. See the FAQ of Steve Grisetti
http://forums.Adobe.com/thread/454585?TSTART=0
2. your comments suggest that you want to create the widescree of DVD-VIDEO (16:9) of your timeline.
3. so, first and foremost, I would determine if you can successfully bring your video in Elements 7 first and export the DVD-VIDEO in NTSC system, before thinking on the conversion of a video NTSC a PAL end product.
4. as a general rule, you select the preset of the project (new project dialog box) to match the properties of your video. Once done this will not stop you changing predefined export later. In the case of your NTSC by Sanyo 720p30 video, I suggest the project (new project dialogue box) = NTSC HDV HDV 720p30 preset. Think the project defined by default as a template from which you can edit your video. Although this 720 p is a variant of AVCHD, I would suggest the HDV category since there is no preset under AVCHD 720 p. Note that the descriptions on the right which you have set the preset.
5. in Share/disc/disc, in the dialog box burn, and then select the preset: NTSC_Widecreen_Dolby DVD. If it's all completed successfully, then we can talk about conversion of NTSC 1280 x 720 16:9 for a DVD VIDEO PAL (720 x 576 25 fps with a flag from 16:9 to stretch the video on screen after the encoding).
6. you can find the following link helpful:
http://www.Camcorderinfo.com/content/article_converting_ntsc_pal.htm
RTA
-
Choose the right paper for the job
Printing photos at home is a convenience that can save time and gas money. But sometimes printing comes out dull and faded and you know that the cartridges are fine. It might be the paper being uses in the printer that may be the problem. Learn how to choose the photo book of right for the work to achieve sharp and vibrant images. This link covers everything from how to choose the correct size paper to do the job and to fit the image. It also has a chart that shows what that finish and best suits the event and then you try to look just as it should. Do it right the first time can not only save time; but too much ink! Here is the link: http://www.hp.com/united-states/consumer/digital_photography/buying_guides/how_select_paper.html?jum...
As always, I hope the community finds this information useful.
-
CBO does not choose the right execution plan
Database: Oracle 9.2.0.6 EA
OS: Solaris 9
I'm trying to settle a query that is generated through Siebel Analytics. I see a behavior which is confusing to me but I hope, would be 'basic' for someone like JPL.
The query is based on a total of 7 tables. If I comment on the 2 dimension tables, the query takes the right index finger on the fact table. However, at the point where I have to add another table to the query, the plan goes awry.
The query with 5 tables is as below:
And the implementation plan is as below:select count(distinct decode( T30256.HEADER_FLG , 'N' , T30256.ROW_WID ) ) as c1, T352305.DAY_DT as c2, case when T44643.PRODUCT_CLASS_NAME = 'MobileSubscription' then T40081.ATTR15_CHAR_VAL else 'Unspecified' end as c3, T352305.ROW_WID as c5 from W_PRODUCT_D T30955, W_PRDATTRNM_D T44643, W_DAY_D T352305, W_ORDERITEM_F T30256, W_PRDATTR_D T40081 where ( T30955.ROW_WID = T44643.ROW_WID and T30256.LAST_UPD_DT_WID = T352305.ROW_WID and T30256.PROD_ATTRIB_WID = T40081.ROW_WID and T30256.PROD_WID = T30955.ROW_WID and T30955.PROD_NAME = 'Mobile Subscription' and (case when T44643.PRODUCT_CLASS_NAME = 'MobileSubscription' then T40081.ATTR15_CHAR_VAL else 'Unspecified' end in ('BT150BB-18M', 'BT250BB-18M', 'BT50BB-18M', 'BT600BB-18M')) and T352305.DAY_DT between TO_DATE('2008-09-27' , 'YYYY-MM-DD') - 7 and TO_DATE('2008-09-27' , 'YYYY-MM-DD') - 1 ) group by T352305.ROW_WID, T352305.DAY_DT, case when T44643.PRODUCT_CLASS_NAME = 'MobileSubscription' then T40081.ATTR15_CHAR_VAL else 'Unspecified' end ;
Note how the dimension tables W_PRODUCT_D & W_DAY_D are connected by a Cartesian join before joining the fact W_ORDERITEM_F table using the composite index 'W_ORDERITEM_F_INDX9 '. This index is composed of LAST_UPD_DT_WID, PROD_WID and ACTION_TYPE_WID, which are foreign keys to the dimension tables.---------------------------------------------------------------------------------------------- | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| ---------------------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 269 | 25824 | 18660 (3)| | 1 | SORT GROUP BY | | 269 | 25824 | 18660 (3)| | 2 | NESTED LOOPS | | 269 | 25824 | 18658 (3)| | 3 | NESTED LOOPS | | 6826 | 579K| 4734 (3)| | 4 | MERGE JOIN CARTESIAN | | 8 | 544 | 6 (17)| | 5 | NESTED LOOPS | | 1 | 54 | 4 (25)| | 6 | TABLE ACCESS BY INDEX ROWID| W_PRODUCT_D | 1 | 37 | 3 (34)| |* 7 | INDEX RANGE SCAN | W_PRODUCT_D_M2 | 1 | | 2 (50)| | 8 | TABLE ACCESS BY INDEX ROWID| W_PRDATTRNM_D | 1 | 17 | 2 (50)| |* 9 | INDEX UNIQUE SCAN | W_PRDATTRNM_D_P1 | 1 | | | | 10 | BUFFER SORT | | 8 | 112 | 4 (0)| | 11 | TABLE ACCESS BY INDEX ROWID| W_DAY_D | 8 | 112 | 3 (34)| |* 12 | INDEX RANGE SCAN | W_DAY_D_M39 | 8 | | 2 (50)| | 13 | TABLE ACCESS BY INDEX ROWID | W_ORDERITEM_F | 849 | 16131 | 592 (3)| |* 14 | INDEX RANGE SCAN | W_ORDERITEM_F_INDX9 | 852 | | 4 (25)| |* 15 | INDEX RANGE SCAN | W_PRDATTR_D_M29_T1 | 1 | 9 | 3 (34)| ----------------------------------------------------------------------------------------------
Now, if I add several tables to the query:
I added a single table W_ORDER_D to the query and execution plan is:select count(distinct decode( T30256.HEADER_FLG , 'N' , T30256.ROW_WID ) ) as c1, T352305.DAY_DT as c2, case when T44643.PRODUCT_CLASS_NAME = 'MobileSubscription' then T40081.ATTR15_CHAR_VAL else 'Unspecified' end as c3, T30371.X_BT_DLR_GROUP as c4, T352305.ROW_WID as c5 from W_PRODUCT_D T30955, W_PRDATTRNM_D T44643, W_DAY_D T352305, W_ORDERITEM_F T30256, W_ORDER_D T30371, W_PRDATTR_D T40081 where ( T30955.ROW_WID = T44643.ROW_WID and T30256.LAST_UPD_DT_WID = T352305.ROW_WID and T30256.PROD_ATTRIB_WID = T40081.ROW_WID and T30256.PROD_WID = T30955.ROW_WID and T30256.ORDER_WID = T30371.ROW_WID and T30955.PROD_NAME = 'Mobile Subscription' and T30371.STATUS_CD = 'Complete' and T30371.ORDER_TYPE = 'Sales Order' and (case when T44643.PRODUCT_CLASS_NAME = 'MobileSubscription' then T40081.ATTR15_CHAR_VAL else 'Unspecified' end in ('BT150BB-18M', 'BT250BB-18M', 'BT50BB-18M', 'BT600BB-18M')) and T352305.DAY_DT between TO_DATE('2008-09-27' , 'YYYY-MM-DD') - 7 and TO_DATE('2008-09-27' , 'YYYY-MM-DD') - 1 ) group by T30371.X_BT_DLR_GROUP, T352305.ROW_WID, T352305.DAY_DT, case when T44643.PRODUCT_CLASS_NAME = 'MobileSubscription' then T40081.ATTR15_CHAR_VAL else 'Unspecified' end;
Now, CBO choose the composite index and the cost has also increased to 78695. But if I just add a / * + SORTED * / referring to the above query, whereas it should join the dimension tables prior to joining the fact table, then the cost falls to 20913. This means that CBO is not choose the plan with the lowest cost. I tried increasing the optimizer_max_permutations 80000, setting session optimizer_dynamic_sampling level 8 (just to see if it works), but without success.----------------------------------------------------------------------------------------------- | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| ----------------------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 44 | 6336 | 78695 (3)| | 1 | SORT GROUP BY | | 44 | 6336 | 78695 (3)| | 2 | NESTED LOOPS | | 44 | 6336 | 78694 (3)| | 3 | NESTED LOOPS | | 269 | 27707 | 78145 (3)| |* 4 | HASH JOIN | | 6826 | 626K| 64221 (3)| | 5 | TABLE ACCESS BY INDEX ROWID | W_DAY_D | 8 | 112 | 4 (25)| |* 6 | INDEX RANGE SCAN | W_DAY_D_M39 | 1 | | 3 (34)| | 7 | TABLE ACCESS BY INDEX ROWID | W_ORDERITEM_F | 86886 | 2206K| 64197 (3)| | 8 | NESTED LOOPS | | 87004 | 6797K| 64200 (3)| | 9 | NESTED LOOPS | | 1 | 54 | 4 (25)| | 10 | TABLE ACCESS BY INDEX ROWID| W_PRODUCT_D | 1 | 37 | 3 (34)| |* 11 | INDEX RANGE SCAN | W_PRODUCT_D_M2 | 1 | | 2 (50)| | 12 | TABLE ACCESS BY INDEX ROWID| W_PRDATTRNM_D | 1 | 17 | 2 (50)| |* 13 | INDEX UNIQUE SCAN | W_PRDATTRNM_D_P1 | 1 | | | |* 14 | INDEX RANGE SCAN | W_ORDERITEM_F_N6 | 86886 | | 212 (18)| |* 15 | INDEX RANGE SCAN | W_PRDATTR_D_M29_T1 | 1 | 9 | 3 (34)| |* 16 | INDEX RANGE SCAN | W_ORDER_D_N6 | 1 | 41 | 3 (34)| -----------------------------------------------------------------------------------------------
Could you please tell how to overcome this problem?
Thank you very much.joshic wrote:
Hi Randolph,The optimizer is set to 'choose', which is the default in 9i. So I guess that CBO uses the "all_rows" mode, because his stats are present.
According to your advice, I tried to adjust optimizer_mode, first_rows_1, first_rows_10, first_rows_100 and all_rows at the session level, but nothing helped.
Another question: since you are obviously having a schema star why don't you use not three separate bitmap indexes on the foreign key columns in the fact table? In this way, you can use a transformation star rather than using a composite index.
You use many OLTP, small, such as transactions that modify your fact table, or is it only loaded by loading in bulk? If you use only loads in bulk index bitmap should be fine.
Kind regards
RandolfOracle related blog stuff:
http://Oracle-Randolf.blogspot.com/SQLTools ++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676 /.
http://sourceforge.NET/projects/SQLT-pp/ -
How to choose the right photo-album
I want to use pictures for my video. I have four different albums. FCP X shows pictures of the only album (and not the good).
What should I do to choose the good album (and photos)?
In Photos-> preferences, click on use as Photo library system.
-
Choose the right power supply for hp P6180t
Hi I'm going to buy a new power supply soon for my HP pavilion p6180t desktop computer and I started a 300w to the corsair cx750 power level. I also want to get a new graphics card soon something in the mid-range. I was wondering if this power supply is the right choice, or if its too much for my computer because I read in another forum that you do not want a power supply with a lot more power you will actually need. For a gtx 660, the minimum is 600w I think so I wanted to just make sure that the power supply is the right choice for my computer. Thank you
In fact, I think that the minimum for a gtx660 is 450w. I think a 750w for this computer is excessive. A 500w would be a lot. But if you buy one with too much power is just a waste of money it actually will not cause a problem. Like putting gasoline in an engine that doesn't need only regular.
-
Choose the right course of training OR + Certification
Hello
Hopefully, I'm in the right section of the forum.
I have some basic knowledge of labview, I created, changed a few screws for hardware equipment such as glasses, food etc, that's when I worked as a trainee.
Well now, I would like to go for certification OR beginners course (certified associate developer) to advanced (architect) and want to start taking my first step, I need some advice.
I went through the training information available on the home page and a few questions,
(1) these courses cover all specific application domain or is a general training, so we can have a bird's-eye view and then apply knowledge in a field interested as (material loop (HIL)), on-board etc.?
(2) what level of course should start with?
(3) I want to do an internship, which might be enough to eventually put me on a job in these tough times? What certification do I go to, how much time it usually takes to get enough experience and the examination of the basic certification, the Certified Associate Developerand other developer likeCertified levels and the architect?
(4) I thought to do strong foundation by taking basic through training courses, OR mount on a project (if I find one) and develop skills in parallel while working and in preparation for certificate exams.
(5) is there a test by which I could determine, what level I need to start with?
I look forward to hearing from you of the people onboard, please guide me.
No and truths don't discourge me :-)
This might be a post immature, because I'm confused where to start with, please bear with me and answer me
Kind regards
Leo
Hi leo,
Yes it is possible. If you have spent enough time, then you can definitely get the knowledge needed to pass the certification. You can take the test online and you can print a few examples. There is also a lot of discussions in the forum about the questions and the answers.
What do you mean with LabVIEW training? If you do a course, the course textbook contains the things you need for certification.
It will be useful.
Mike
Maybe you are looking for
-
I recently bought a used Tecra 8100, attempts to connect to the internet seems to be failing, either because the equipment has been used before on a local network with a supervisor password (which I don't know), the signal of your modem is missing (a
-
Windows 8 Pro will not activate after recovery
Hi all A few days ago, the drive hard my Lenovo ThinkCentre E73 suddenly stopped working. After the replacement of what I did full software recovery with Windows 8 Professional CD I ordered a Lenovo time ago. But after the Windows installation is not
-
The e-mail was sent from a PDF in Adobe Reader! that my computer does not open!, josephine
-
Bubbles screen saver and angry birds stopped work unsupported opengl2
Bubbles screen saver and angry birds stopped work unsupported opengl2. I've updated my vidieo driver. I use a NVIDIA GForce 8400 GS. Everything worked when I close the screensaver computer downstairs but when restarted and AB does not?
-
Duration of lock FireSIGHT/SourceFire user configuration?
Hi all I've been searching in the documentation for 5.3 and 5.4, and I don't find no information for what the account lockout duration is for when a user does not have the number of logins set to the value of maximum number of connections has failed