No response when I try to boot my laptop

Similar Questions

• When I try to boot my laptop it says prepare don't then it goes to black screen and nothing happens

  original title * Auto repair

  When I try to boot my laptop it says prepare don't then it goes to black screen and nothing happens. Before that, I got a message that some files are missing or that contains errors and it showed error 0xc0000185 and a \efi\microsoft\boot\bcd file.

  Hi Mark,

  Thank you for your response.

  According to your description, I understand that when you tried to install Windows from a support your computer freezes.

  I suggest boot you from the DVD and click on repair your computer and check if it helps.

  If the problem persists try the steps below.

  Method 1:

  Step 1: Access Mode safe mode with command prompt and run SFC

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore damaged files

  1. Go to safe mode with command prompt Mode.
  2. Now in the command prompt window, type sfc/scannow and press enter (Note: there is a space between sfc and/scannow).

  Step 2: If SFC help not try to run the disk check in the command prompt.

  Type the following command and press ENTER:

  CHKDSK /scan

  Important: All performing hard disk the disk check if bad sectors are found on the hard drive, while the bad sectors can be refunded, but there may be loss of data.

  Hope this information helps and let us know the State of the question, we will be happy to help you.

• I get startup repair screen when I try to boot my laptop from dell inspirion windows 7, I run the scan and detects any errors. When I ran repair usb key received the error 0x400110020000100A

  I get startup repair screen when I try to boot my laptop Dell Inspiron windows 7, I run the scan and detects any errors. So, I tried to use a USB repair for a laptop Dell Latitude Windows 7 pro and I still can't the computer to start. Tried to restore to the factory settings, can not. I have no image, backups, all missing, restore points?

  After that I tried to launch the USB repair I got 0x400110020000100A error code and I received error (0x8007027E) indicating the device will not start without a reboot.

  Anyone know how to fix this?

  Any advice would be greatly appreciated. I'm not computer illiterate, but am not pro either. Just use them not program them or even understand all languages!

  ____________________________________________________________________________________________________________

  Dell Inspiron laptop about 4-5 years.

  Running windows 7 Home Edition.

  Does not start little matter what I tried.

  If I remember correctly, I looked in MS-DOS mode and noticed that it said something like "x: win...» "that seemed strange to me because I thought that it should say"c: victory... "but as I said I am not a computer wiz so if anyone can help me, I would appreciate it.

  I'm about to rip the hair off my head with my laptop. My latitude was blue planned, surprisingly I fixed it (don't ask how, you couldn't tell). Then my dell inspiron would not start right after my dell latitude fell out of my truck and landed on the sidewalk, wanted to kill the person, the screen is broken. I can use it but it is very difficult, see a mosquito net and not perfectly clear, works well. lol someone knows somewhere or that would install a new screen for a reasonable price? I live in the Boston area.

  Back to the laptop won't start not, when I ran repair USB key received the error 0x400110020000100A

  Hello

  Thank you for the update on the issue. I appreciate your time and effort in resolving this issue.

  You can try the following methods and check if it helps.

  Method 1:

  You can use the Bootrec.exe tool in the Windows recovery environment (Windows RE) to troubleshoot and repair the following items in Windows Vista or Windows 7:

  • A master boot record (MBR)
  • A boot sector
  • A Boot Configuration data (BCD) store

  Note: When you are troubleshooting startup issues by using the Windows RE, you should first try the Startup Repair option in the System Recovery Options dialog box. If the Startup Repair option does not resolve the problem, or if you must troubleshoot more steps manually, use the Bootrec.exe

  Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  If the problem persists, proceed to method 2.

  Method 2:

  Please follow these steps:

  1. Tool command prompt open in the mode of the Windows recovery environment .
  2. You will see X:\Sources
  3. Type chkdsk c:\ at the flashing prompt to launch the utility Chkdsk. replace c:\ with the letter of the drive that you want to run the Chkdsk utility. If the hard drive is d:\, then type that instead.
  4. After the "chkdsk c:\. "insert \f command to fix errors on the disk volume or the \r to recover bad sectors and then press ENTER.
  5. Restart the computer once the chkdsk command has completed.

  Note: Running chkdsk on the drive if bad sectors are found on the hard drive, it attempts to repair this sector, if all available on which data may be lost.

  For more information: Please refer to the section of the additional If you can not boot into Windows at all stages in the following link.

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-in/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• By mistake I have disabled the administrator user and now I am not able to start my laptop as when I try to boot my laptop it says disabled administrator.

  I disabled the administrator since the since the link "my computer / manage / local user and groups / user / administrator / properties." Now I am not been able to start my laptop. When I try to start the laptop, it shows the administrator user is disabled.

   
  Please help with a solution
  
  Biju
  New Delhi

  You must restore your registry to a point in time before that you have disabled the administrator user.  It is not easy if there is any left on the system administrator user.

  One way to do this is to start your computer from a CD rescue-style such as BartPE and UBCD4Win or Linux Livecd such as Knoppix.  You can then follow the steps in the following article from part 2, step 6, using GUI to copy and rename the files rather than orders from command-line specified in article.

  "How do I recover from a corrupted registry that prevents Windows XP startup"
    <>http://support.Microsoft.com/kb/307545 >

  If you are not experienced, I recommend to get help.

  HTH,
  JW

• When I try to start my laptop, it goes to the Acer logo screen and will not boot Windows 8.

  Acer E5-471

  When I try to start my laptop, it goes to the Acer logo screen and will not boot Windows 8. Only a black screen and mouse pointer appear. How can I solve this problem?

  Hello

  1 power off the device
  2. power on and immediately keep taping Alt + F10, unit will start to recovery, choose Exit & continue to windows. Post back if I helped

• If I get the dvd of recovery to win s 7 of the manufacturer, what problems is I meet when I try to boot from a usb dvd player

  Separated from this thread.

  OK here is what I was asking.  If I get the dvd of recovery to win s 7 of the manufacturer, what problems I will get when I try to boot from a usb dvd player.  I worry because my computer is uefi firmware. should I disable secure boot, make sure the dvd usb drive first in the boot order.  What other bios setting I would be worried.

  You will get a facility better if you find the ISO to create such media as discussed in step 1 of the clean reinstall Windows 7 follow these steps to get the best possible installation.  You can even create flash media if that's easier for you.

  Regard to Recov disks that reinstall all the bloatware factory, Yes, you must disable Secure Boot in firmware that doesn't support UEFI to install Windows 7, and then start the media as a UEFI device.

  After installation, you can pick up some performance and optimize the installation by following Clean Up Factory Bloatware .

  You can also do a Clean install Windows 10 improvement using the Windows 7 product key, as this is explained in this link.   You can at any time change to Windows 7, even move back and forth until only is installed at the same time.

  Let us know if there are any questions and how it goes.

• When I try to reboot my laptop (toshiba Windows Vista) displays a black screen and now I can not it reboot. It says bootmgr missing. What should I do to restart?

  Can someone help me please! When I try to reboot my laptop (toshiba Windows Vista) displays a black screen and now I can not restart. It says systeminst9.wnm is missing. What should I do I restart yo?

  Hi Ashutosh,

   
  You did changes to the computer before the show?
   
  This error indicates that the boot sector is corrupted or missing.
   
  I suggest for the link and follow the steps in the article:
  Windows error message «Bootmgr is missing Press Ctrl + Alt + Delete to restart»
  http://support.Microsoft.com/kb/2622803
   
  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• I have tossiba laptop when I try music on my laptop speaker works but not the headphones work even not pregnant

  I tossiba laptope when I try music on my laptop speaker works but not the headphones speakers not even extra work

  Hi rajuarman,

  -Headset works fine on other computers?

  -Have you installed the audio drivers on your computer?

  -Not the problem only occurs when trying to play music in Internet Explorer?

  Your question does contain all the required information necessary for us to help you. Please include more information to continue troubleshooting as a result.

  Please see How to ask questions and provide the information required to help others.

  In the meantime, check out these articles:

  Tips for solving common audio problems

  No sound in Windows

• When you try to update my laptop using the update of windows, the program blocking updates.

  When you try to update my laptop that runs windows 7 service pk 1 using windows update, the program blocks updates! My setting are correct I already checked. Not had a problem with updates until I had to do a full restore.

  I would be extremely grateful for any advice. Thank you

  Try this: difficulty of Microsoft Windows Update problems and troubleshooting problems with installing updates

• The PC shows it belongs to a homegroup, but when I try and join the laptop to the Homegroup PC, following the instructions, including the seizure of the password, it fails.

  I have two computers in a small home network, both running Windows 7. A laptop and the other a PC. The two appear in the network on each computer. The PC shows it belongs to a homegroup, but when I try and join the laptop to the Homegroup PC, following the instructions, including the seizure of the password, it fails. I want to share photos, files and documents, etc.

  Any ideas.

  Original title: homegroups

  Read this discussion and see if it helps you:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/HomeGroup-cannot-figure-out-how-to-share-files/f2ee4a6b-1540-4894-8a80-15168e55fc83>

  Here is another method that doesn't use homegroup. I've used this between two machines of Win7 and between Win7 and Win8 machine, as well as the topic Win7 and WinXP. I am frustrated with Group residential everything and currently have disabled entirely.
  http://www.howtogeek.com/HOWTO/Windows-7/share-files-and-printers-between-Windows-7-and-XP/>

  SC Tom

• Satellite A210 - 128 (PSAELE) turns off when you try to boot from the CD/DVD

  Hi all. I have a (serious) problem.

  I bought my Toshiba two years ago (it was brand new) with Windows Vista already installed (vista and boot partition). Now I'm trying to boot and install Windows 7 Ultimate, but after I select boot from CD/DVD and start the copy of the system files, my Toshiba * turns *, completely. Overheating is not the problem for sure.

  Anyone with a similar experience or everything to know about how to solve my problem? :(((

  Thnx,

  Stipe

  Hello

  Why you are sure that your computer laptop isn't overheating? In my view turn is the typical pattern of overheating and you must clean your laptop using a jet of compressed air. This could blow out the dust from the cooling fans.
  Check this box!

  You have this problem when you try to install Windows 7 or make this happen with the Toshiba recovery disc too?

  Maybe during the process of copying the files will be written on a bad sector on the HARD drive and so he shuts himself who knows?

• "Hang on" VM when you try to boot from the CD-ROM host or .iso

  I would appreciate any help on a problem I have. I just

  installed VMWare server 2.0 on a Server 2003 64-bit computer. I tried

  creation of 2 new reviews VM but I am unable to install an OS that I can't

  make use of the CD-ROM. If I "Add Hardware" and add the CD-ROM drive.

  Reset the computer I actually see the spinning of CD-ROM and the

  light on as if it is reading, but the VM console is just empty. Just a _____

  in the upper left corner. Same thing if I try to use a .iso. So I have

  Cannot use the CD ROM or a .iso file. That someone has it all

  suggestions? Thank you very much.

  Hello again. You can start any .iso image? What happens if you try to boot from the memory Tester ISO I have attached to this message - works very well with guests on my host server 2.0?

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• When I try to boot from the rescue disc I get a blue screen

  When Vista starts up, the first thing I see is a screen that lists resources conflicts w/pci bus controller... three or four conflicts on resources, I press F1 to continue, then the computer detects new hardware... 1 sm bus controller, but the computer can not drivers, peripheral pci, same thing, cannot find drivers... Manager of devices display problem with six cameras, sm bus controller, pci device, host ricoh 1394 controller, ethernet controller of broadcom 440-10/100, hyper graphics tunnel transport amd and via agp controller cpu. I thought to reinstall windows, since I can't find sm bus controller drivers, but when I boot from the rescue disc, after loading windows files, I get a blue screen.   desperately need help. sedonatom

  Hi sedonatom,

  1 did you change on your computer before this problem?

  2. What is the brand and model of your computer?

  3. What is the error message true blue screen that you receive?

  I suggest you run chkdsk from the Windows Recovery Environment and verify if you are able to start correctly on the desktop.

  
  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  one) to boot into the Windows recovery environment, you can follow this link:

  Repairs to the system of Windows recovery environment

  (b) to the Windows Recovery Environment command prompt, type the following command and then press enter on the keyboard:

  CHKDSK [/ p]: [/ r]

  Note: At first, try to run chkdsk/p & check if it helps. Later, you can run chkdsk/r.

  Hope the helps of information.

• BlackBerry Smartphones no response when you try to click on the links on web pages

  Hey y ' All

  This is a problem that came only in the last day or two...

  Had my Blackberry 9000 for a few weeks and have been able to use internet with it with no problems. However in the last two days, I find that I can no longer click on all links using the trackball. There is no response either whenever I tried to click on the links. This is valid for all websites on all three of my browsers on the device. Text based links, I can just use the command 'Get Link' or press 'enter', but these options are not available for links based on java as the buttons of opening session on Yahoo and some other sites, therefore, I can not in them.

  In addition to the above issues, the trackball seems to work very well. I am able to click on bookmarks, that seems to work... and all the other functions of the trackball (AFAIK) seems to work very well. It's just when I'm on websites that I can't click on the links either.

  I hope this makes sense

  Thank you

  Greg

  Have you tried to reset the device by removing the battery for a minute? After that the battery is given to, it will restart in any 1-3 mins, then try it

• When I try to boot from a bootable usb key, his shows bootmgr missing error.

  Bootmgr mising when you use a bootable usb key.

  I have windows 7 nvidia 2010 on my desk. I have a new laptop with a free version of linux. my laptop do not have a CD or dvd drive to start. When I'm trying to boot from a USB bootable, his error showing that bootmgr missing. Press ctrl + alt + delete to restart. I tried sp3 and xp sp2. having the same problem with both. Kindly help.

  Hello

  1. you are trying to install Windows XP by using the bootable USB key?

  Check if the sequence of the BIOS (Basic Input Output System) is set to boot to the operating system from the USB key.

  For more information get in touch with the manufacturer of the system.

  Note:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.