"Hang on" VM when you try to boot from the CD-ROM host or .iso

Similar Questions

• Satellite A210 - 128 (PSAELE) turns off when you try to boot from the CD/DVD

  Hi all. I have a (serious) problem.

  I bought my Toshiba two years ago (it was brand new) with Windows Vista already installed (vista and boot partition). Now I'm trying to boot and install Windows 7 Ultimate, but after I select boot from CD/DVD and start the copy of the system files, my Toshiba * turns *, completely. Overheating is not the problem for sure.

  Anyone with a similar experience or everything to know about how to solve my problem? :(((

  Thnx,

  Stipe

  Hello

  Why you are sure that your computer laptop isn't overheating? In my view turn is the typical pattern of overheating and you must clean your laptop using a jet of compressed air. This could blow out the dust from the cooling fans.
  Check this box!

  You have this problem when you try to install Windows 7 or make this happen with the Toshiba recovery disc too?

  Maybe during the process of copying the files will be written on a bad sector on the HARD drive and so he shuts himself who knows?

• When I try to boot from the rescue disc I get a blue screen

  When Vista starts up, the first thing I see is a screen that lists resources conflicts w/pci bus controller... three or four conflicts on resources, I press F1 to continue, then the computer detects new hardware... 1 sm bus controller, but the computer can not drivers, peripheral pci, same thing, cannot find drivers... Manager of devices display problem with six cameras, sm bus controller, pci device, host ricoh 1394 controller, ethernet controller of broadcom 440-10/100, hyper graphics tunnel transport amd and via agp controller cpu. I thought to reinstall windows, since I can't find sm bus controller drivers, but when I boot from the rescue disc, after loading windows files, I get a blue screen.   desperately need help. sedonatom

  Hi sedonatom,

  1 did you change on your computer before this problem?

  2. What is the brand and model of your computer?

  3. What is the error message true blue screen that you receive?

  I suggest you run chkdsk from the Windows Recovery Environment and verify if you are able to start correctly on the desktop.

  
  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  one) to boot into the Windows recovery environment, you can follow this link:

  Repairs to the system of Windows recovery environment

  (b) to the Windows Recovery Environment command prompt, type the following command and then press enter on the keyboard:

  CHKDSK [/ p]: [/ r]

  Note: At first, try to run chkdsk/p & check if it helps. Later, you can run chkdsk/r.

  Hope the helps of information.

• error message when you try to print from the windows photo gallery

  I can't print the Windows Photo Gallery photos: failure of the Document to print - load plain paper.  I reloaded paper, updated printer drivers and called Dell technical support, who said it was a software isue since I can print other documents as well as photos from Photoshop Elements. I get the same message when I try to print from painting and the image viewer. Looks like a problem of microsoft.
  My printer is Dell V515w and is 4 months old.
  Even if I can use Photoshop Elements, it is easier to use the Windows Photo Gallery.  Any ideas?
  Thank you
  Richn13

  Hello
  See this link:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/unable-to-print-only-one-page-in-a-multiple-page/737b4afc-0D0E-4cb8-8374-f6de218720b2

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/trouble-printing-from-Windows-Photo-Gallery/456cc8bf-9791-4619-82e2-de121deec9d3

  Let us know if it helps.

• I access my favorite but hangs or crashes when you try to go beyond the home page.

  I can open a forum home page, but cannot progress further.

  Hello Colboro,

  Thank you for the question!

  It is disheartening to know that have problems you with hyperlinks. As I understand well you can't cross Web site after you open the home page.

  I need to ask you some questions to help you best.

  1. which browser is installed on the computer?

  2. were there any changes (hardware or software) to the computer before the show?

  3. the problem persists with a particular Web site?

  4. do you get an error message when you click links after you open the forum page?

  Perform the steps from the link if you have Internet Explorer and check.

  Nothing happens when you click a link in Internet Explorer

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Meet us if you experience problems with hypertext links or any other problem of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• restarting my computer on windows xp load screen when I try to boot from the disc, I get a blue screen can someone help me?

  Recently, I restarted my computer and received the following message is displayed:

  "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.

  If your computer stopped responding, restarted unexpectedly, or was automatically closed down to protect your files and folders, select last good known Configuration to return to the most recent settings that worked.

  If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button has been activated, or if you are not sure what caused the problem, choose Start Windows
  Normally.

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Last good Configuration known (your most recent settings that worked) start Windows normally

  Use top and down arrow keys to move the selection of your choice.
  .
  Seconds until Windows starts: 30 "

  After I tried all the options available, but whenever I do it, windows is only a blue Flash of a screen and then brings back me to the same menu over and over again.

  I can NOT CONNECT AT ALL even in safe mode (by connection, I mean I can't access the section Office at all - case im explained does not this right). as soon as it reaches the load to windows xp my computer screen restarts as if I am the ' turn off and turn back on.

  I tried to perform a repair of Windows through my cd of instalation installation, but it just took me a blue screen saying there was a problem and he had to shut down to avoid damage. He also told me this: * 0x0000000a (0x00000002, 0x00000000, 0 x 00000018, 0x80819b92)

  The computer is an emachine and was purchased at a walmart nearly 5 years ago and it worked fine until one day it started to do this. I can't access any of my files or anything. It must be a software problem, because since then I checked all the problems of material possible and found nothing. the result of this is that I can't use my computer. It is a desktop computer and was reliable until it happened. I'm not sure of the cause, and I think it's something wrong with the operating system. I have tried everything I know and need help as soon as possible.

  Hi josiahgenesis,

  ·         Have you been able to launch the repair facility?

  Try the following.

  Method 1: Try to select disable automatic system failure reboot from the advanced boot menu options to see if it helps.

  Method 2: Check to see if the following is useful.

  You receive an error message "Stop 0x0000000A" in Windows XP

• Error DF024 when you try to install from the manager on Windows 10.

  Hello

  I hope that someone on the forum can help me that I find all adobe links VERY useless. I recently updated my version of Windows 10 and erased all my programs and my C: drive to allow a good computer. Since then, Adobe Application Manager is not a CC 2015 applications install to my computer without this error:

  "-------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 1 Error (s)

  -Payload: Adobe Premiere Pro CC 2015 9.0.0.0 {38C72D42-0672-43B1-9E05-E7631684F9A1}.

  ERROR: DF024: cannot move the file in "C:\Program Files (x 86) \Common {38C72D42-0672-43B1-9E05-E7631684F9A1} \_77_6da23380d7fce ae57da591c4af577f49 ' to 'C:\Program Files\Adobe\Adobe first Pro CC 2015\AXE8SharedExpat.dll' error 32 the process cannot access the file because it is being used by another process... Try setting the correct permissions for the specified file/folder or parent, so that the admin has the right to modify. (171 Seq)

  -------------------------------------------------------------------------------------"

  This happens on all apps via the Manager. To work around this ive tried to install directly on the site, only to be converted in the handler for that he fails again. I ran all cleaners known to man only for her to not make any difference whatsoever, and ive even tried the solution that was supposed to have been a 'determination' to someone elses similar problem (this link https://forums.adobe.com/thread/1858062?q=Error+DF024) even when the lance in the account admin high on all machines W10 again does nothing and is defective. I tried to remove the Adobe folders manually in all possible positions, but again, this has no effect.

  I'm really at a loss as to what I can try but PLEEEASE HEELLPP!

  Thanks in advance!

  Disable anti-virus and firewall, if its on in selective startup mode and try to install.

  Beyond that, we will have to check with the Setup logs to find out what past exactly.

  Or you can also contact Technical Support Adobe once, they can access remotely your comp and check with the question.

  You can contact the Support from Adobe using link below:

  [Click the button still need help and select the Chat option]

  Contact the customer service

  Ask for technical assistance.

• I get 2 Error Code when you try to update from the Office of creative cloud

  I get this message: "creative cloud has failed to update. (Error code: 2) ".

  Refer to the: Error Code 2 has no Creative Cloud Desktop app update

  I hope this helps.

  Thank you

  Varun

• Need help please, bios sees the new hard drive but still cant boot from the cd-rom

  HI there, Im having some problems here. First of all, I have a Dell Dimension XPS Gen 2 with BIOS A06. I replaced the original hard drive to 120 GB because I received a stop error code with a new 320 GB (000000 x 24 or somethinglike that) but after research I was convinced it was the reader. I installed the new drive and the BIOS sees it under drive as primary drive SATA configuration... It's good, I guess, but now when I go to the sequence of hard drive I get (1. Unknown device (not installed) 2. System BIOS 3 boot devices. (Not installed) USB device) why the drive is not displayed here?

  OK, so now when I try to boot from a CD-rom Home XP I get "strike F1 to retry boot, F2 for Setup utility. I can't seem to get around this problem any time now. I can get it to boot from a floppy disk, but not the CD, why is this? The two CD-ROMs are appearing in the BIOS as second master and slaves. IM really stumped on this one, please help!

  Message edited by jaygen on 18/03/2008 20:22
  
  

• When starting, my windows xp hangs or crashes when you try to load 'personal settings '. I can't do something, but stop once again on commissioning, she repeats the same actions.

  When starting, my windows xp hangs or crashes when you try to load 'personal settings '. I can't do something, but stop once again on commissioning, she repeats the same actions. What now? Thank you

  Hello

  Disconnect all external devices from the computer and try to restart the computer and check what is happening.

   

  Step 1:

  Try to boot to the desktop in safe mode and check what is happening. Only basic files and drivers needed to run Windows are started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers. To start in safe mode follow the link.

  http://support.Microsoft.com/kb/315222

  Step 2:

  If you are able to boot to the desktop in Mode safe, it means that the third-party application prevents the computer from starting in normal mode. To check you can configure the computer to clean start State and then try to boot into normal mode and check what is happening. To set up its own start-up follow the link below.

  http://support.Microsoft.com/kb/310353

  If the problem does not continues when the computer is in the clean start State follow the steps listed to identify which application is causing the problem.

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• If I get the dvd of recovery to win s 7 of the manufacturer, what problems is I meet when I try to boot from a usb dvd player

  Separated from this thread.

  OK here is what I was asking.  If I get the dvd of recovery to win s 7 of the manufacturer, what problems I will get when I try to boot from a usb dvd player.  I worry because my computer is uefi firmware. should I disable secure boot, make sure the dvd usb drive first in the boot order.  What other bios setting I would be worried.

  You will get a facility better if you find the ISO to create such media as discussed in step 1 of the clean reinstall Windows 7 follow these steps to get the best possible installation.  You can even create flash media if that's easier for you.

  Regard to Recov disks that reinstall all the bloatware factory, Yes, you must disable Secure Boot in firmware that doesn't support UEFI to install Windows 7, and then start the media as a UEFI device.

  After installation, you can pick up some performance and optimize the installation by following Clean Up Factory Bloatware .

  You can also do a Clean install Windows 10 improvement using the Windows 7 product key, as this is explained in this link.   You can at any time change to Windows 7, even move back and forth until only is installed at the same time.

  Let us know if there are any questions and how it goes.

• After you install a Foxfire 5.0 update, I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

  I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

  Do a clean reinstall.

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Uninstall your current version of Firefox.
  • Do not remove the data of a personal nature when you uninstall the current version.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data is stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

• Firefox will not print on my HP PSC 750 printer and loses all formatting when you try to print to the printer Brother HL-5240

  I have no problem with one of my printers when printing 11.7 before or IE 6.0.2800.1106 but cannot print from Firefox 3.6.13 (or earlier).
  When you try to print to the HP PSC 750 inkjet printer, a "Print" dialog box appears, showing the title: xyz and a progress meter showing 100%, but it's be covered almost immediately by a second dialog box stating "an unknown error has occurred while printing" and, even if the continuous printer saying 'impression', no printing is taking place.

  When you try to print to the Brother HL-5240 laser printer, printing will take place, but all formatting is lost and what comes out is a block of text unintelligible running.

  What can / should I do to get Firefox to print correctly on my two printers?

  1. print.print_printer reappears after printing something. This pref is the last printer used, so when you reset the prefs it does not appear until you print something.

  2. that your problem with printer HP reappeared quickly, try a new profile.
  
  http://KB.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows

  3. with regard to the preferences for the old printers, if reset you these Pref they don't come back (assuming that you do not select accidentally printers or printer drivers are uninstalled).

• Windows asks for a password when you try to access to the "view work group computers."

  We are on a network.  Main computer, that we can access through the receptionist connect you and access shared files on this computer.  Computer from the receptionist, windows asks for a password when you try to access to the "view work group computers."  We tried to use its password.  However, the shared files are still not accessible.

  Hello

  1. what happens when you enter the password?

  2. how many computers are connected to this working group?

  Refer to this link and check: You cannot access shared files and folders or browse computers in the workgroup with Windows XP

  http://support.Microsoft.com/kb/318030

  I hope this helps!

• Network error when you try to read from C:\Windows\Installer\iTunes.msi

  Original title: error when you try to install iTunes on Windows Vista
  I am trying to install the latest version of iTunes available in South Africa. I use Vista to the Windows Welcome page.

  I downloaded the itTunessetup.exe file, but when I try to run the installation, I get the same message "network error when you try to read from C:\Windows\Installer\iTunes.msi.
  I am at a loss to understand this - I'm not much of a PC expert either.
  Any suggestions? Thank you

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question. I suggest you follow the troubleshooting steps to check if this may help.

  Method 1:
  Run the fix it and check.
  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall

  Method 2:
  You can completely uninstall older versions of iTunes installed on the computer, then I suggest you to install the latest version and check.
  Download link

  http://www.Apple.com/iTunes/download/
  
  Method 3:
  You can try the form as follows article knowledge base and check if you are able to install iTunes.
  Problem installing iTunes or QuickTime for Windows
  http://support.Apple.com/kb/HT1926

  Reference link:
  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  If the problem persists then you can contact iTunes support: http://www.apple.com/support/itunes/
  Just reply with the results. I'd be happy to help you more