No scanning wireless with MacBook and C309n

Similar Questions

• Scanner does not work on HP Officejet 6500 Wireless with MacBook Pro

  I have the all-in-one Officejet 6500 wireless and print fine but the scanner does not work even after the implementation of suggestions on the Web site.  I recently installed Mac OS x 10.6.8 but I had the same problem with the previous software.  Scan worked fine until the last few months.  I get the message that "HP Scan Pro quit unexpectedly" or "Sorry, an unknown error has occurred", but no additional information.  I have re-installed the software HP twice but to no avail.  What can I do?

  Try the scan using the Image Capture in your Applications folder.  Click your scanner on the left side, click "Show details" on the bottom.

• Can not scan wireless between mac and photosmart 7515

  Print very well between Mac and a printer wireless

  Can scan correctly when CONNECTED between Mac and a printer

  Have already uninstalled and reinstalled the software

  Message says function 'Enable Scan to Computer' if she goes on to say that with Mac users, it is automatically activated.

  Mac OS 10.7

  Hello

  Adding the printer using the Protocol IP Jetdirect (tab within the intellectual property) only will allow you to print.

  To scan, Mac must communicate with the device as a Hello. The multicast must be supported by the router.

  https://discussions.Apple.com/message/13184615#13184615

  As you can see in bellows Joey post, it seems that the router Actiontec M1000 support not Hello.

  The user said it was confirmed by the manufacturing of router and a firmware update will be available.

  However, any update firmware seems to be available:

  http://www.Actiontec.com/support/product_details.php?PID=38&Typ=all

  I recommend you contact support Actiontec to check all supported multicast router.

  Kind regards

  Shlomi

• Microphone delay/latency with MacBook and VMWare/Windows 7

  There is a delay of 1 second between my Mac and Windows 7 running under VMWare Fusion.  I saw old discussions on this subject, but not a resolution.

  Here is my configuration:

  MacBook Pro retina

  10.8.4 OSX

  VMWare Fusion Professional 5.0.3 (free trial)

  Windows 7 Ultimate 64 bit

  The problem occurs when the use of the MacBook built in microphone and when you plug a microphone into the audio input of the MacBook.

  We can consider the 1 delay sec by:

  OSX: System-> sound-> entry Preferences-> click on "external Microphone".  Pay attention to the "Input Level" curve

  Windows 7/VMWare Fusion: Control Panel-> hardware and sound-> manage Audio devices-> recording.  Pay attention to the vertical counter on the right side of the window.

  Speak into the microphone and watch the levels for OSX and Windows 7 and the time between the two.

  Installation of a new virtual machine instead of importing cured Parallels microphone latency.

  Thank you much for the help!

  -Jeff

• HP Officejet 150: Can not scan wireless

  I have a HP all-in-ONE Officejet 150 and that you are unable to scan wireless.  Right now, I can't even the bluetooth icon to turn blue, although it said that the radio is on.  I took my old printer because of such problems.  I handed to factory, combined with my Sony computer, but it does not recognize my computer.  Suggestions?  I can use a cable and get it to the scan, but that defeats the purpose of bluetooth technology.

  Hi @Dragonbebe,

  Welcome to the HP Forums!

  I understand that you can not scan wireless with your mobile printer HP Officejet 150. I'm happy to discuss this issue for you!

  This printer can only scan with the printer cable USB is plugged. As the wireless Bluetooth connection is strictly to be printed. Please see the user's Guide, for more information your printer.

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope that answers your question and have a nice day!

• I have a laptop with Windows XP. After getting a virus, I scanned with AVG and removed the threat. After re-booting, I can not connect to wireless internet.

  I have a laptop with Windows XP.  After getting a virus, I scanned with AVG and removed the threat.  After re-booting, I can not connect to wireless internet.  The icon shows "acquiring network address".  I connected the router directly on laptop computer connected to the wireless network and still unable to connect.  I tried to restore the system as well, but the message says "unable to restore the system, no changes were made.  Help?

  original title: acquisition of network address

  Hello, Steve.

  Try this link below on how to reset IE and let me know if it helps.
  http://support.Microsoft.com/kb/923737

• HP Photosmart C4380 [8A36CB] communication error with MacBook OS 10.7.5 more wireless

  Hello

  I get the message 'communication error' when I try to print wireless at a Photosmart C4380 of my MacBook (OS 10.7.5) through a Router 2 GB TimeCapsule.

  The message also says: "/ usr/libexec/cups/backend/dnssd failed ', but I don't know what to do with...

  I tried to de - and re - install, reboot the laptop, printer and router and pull all the plugs in different sequences, first use the USB cable to install wireless and any other help HP... but nothing seems to work (doctor of HP is not available for Mac).

  The weird part is that:

  1. He started a couple of weeks, without having changed anything (to my knowledge),

  2. printing of my iMac works fine (same network, same software, same settings version, etc.)!

  2. printing via the USB port on my MacBook works fine

  3. can I print a test page form "Utility from HP" my MacBook (and of course my iMac but it works very well even when)

  4. I can access the printer through "http://hp8a36cb.local./index.htm?cat=info&page=printerInfo" and there is just no problem not mentioned whether,

  5. the "Configuration Page of HP network' and the 'wireless network Test report' congratulating me for the installation of my printer wireless... but it doesn't work.

  I read almost all messages on communication errors more wireless but that you have not found an answer to my question (yet).

  Is there anyone with a solution? Please?

  Download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• OfficeJet 4500 wireless do not print with MacBook 10.5.8

  The device will scan wireless but will not print wireless or to the USB with the Macbook. The wireless shows the file sent, then after a few seconds clears the queue and poster printer ready, despite no action at the printer. Try USB port it hangs just showing printer busy, status: 0xe00002e9. The printer works on USB with an iMac. I have uninstalled and reloaded several times from the disk and downloaded the drivers on the HP site, which none worked. Any suggestions for how to get printing to work?

  Hello

  Is the 0xe00002e9 appears on the front panel of the printer or on Mac OS?

  If the error appears on the computer screen, I also suggest you try reset the Mac printing system:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  In the Apple menu, click System Preferences.
  On the view menu, click Print & Fax. Dialog print & fax opens.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Now, click on the sign more, select the printer in the list and try to print again.

  Is there a difference?

• Printing with Macbook Photosmart wireless problem

  I'm not sure if anyone can help, Im a beginner and not very technical so be sweet/patient.

  I bought a HP Photosmart B110, that allows to print wirelessly to a network for my son who just went to College. It has a Macbook and all seemed well with the implementation and test pages printed with all the "Passes" while trying to find the printer on the network no printer showed. I added manually the printer even if the instructions have not really cover how to do this with a variety of menu options such as the LPD, HPJet and intellectual property. I went down the road to intellectual property and were able to get a test page to print, but whenever I try to print a document or scan something I get an error despite initially seeming fine. To do this, what you expect on the first ' print page 1, Page 2, etc. ", but a yellow triangle appears on the printer icon and a message" network host 172.xx.xx.xx is busy will retry in 20 seconds...» 30 dry etc."the Mac can see the printer on the network of the United Utilities to print all come showing the use of ink etc (and as mentioned printed the test page) but I'm really stuck on why I can't get a document to print, can someone point me in the right direction please.

  I do not large companies such as universities allow individuals to add devices to their network, such as printers.  If they allow to connect, it may be that they do not manage the data circulating on the printer.

  In addition, it is a bit dangerous to add a printer to a vast network that anyone can print on it at any time.

  I recommend this printer connected to the computer via USB.

• Tips before buying HP all in one wireless to work with mac and AirPrint

  I am looking to buy a HP Officejet Pro 8600 as my current HP is on the blink (well I think it's that I posted here with my problem with the Office Jet Pro 8500 and now it does not work with my mac at just my PC windows) but I need to know if I buy a HP Officejet Pro 8600 can I upgrade the network and not only print , but the scan wireless (probably more AirPrint) to a Mac Book Pro (end of 2011 on the last updated firmware), or is there a better printer for this task which is so cheap that I do not use the fax, but I'm going to use all other options; I print about 300 pages per month, as we Exam course and working documents to be printed on a regular basis in my house, that's why I'm leaning towards an Office Jet.

  Can what advice you give?

  Finally, what is the difference between a HP Officejet Pro 8600 and HP Officejet Pro more than 8600?

  Sorry I'm so "wet behind the ears" when it comes down to this

  See you soon.

  Hello

  The 8600 pro is a great printer, however, the 8500 is great too...

  By looking at your original post the question more likely related to your network and not with the printer itself.

  Before purchasing a printer new please try following the steps below and let me know if this can help, if the problem caused by your router you will instead see a similar behavior with the 8600 too:

  Unplug the cable ehthernet on the side of the router, and then connect it directly to your Mac (a direct connection cable between the printer and the Mac itself).

  Wait 2 - 3 minutes to allow the connection to fill and then open print & scanning.

  Click on the sign more and add the printer listed as Hello.

  Now start the software update from the Apple menu and check if you can scan via print & scan, Capture Image or excerpt:

  http://support.HP.com/us-en/document/c03550518

  If the analysis works by bypassing your network the problem caused by lack of compatibility Hello of the BT Home Hub, which can be called as Hello, mDNS, by different router or multicast IGMP manufactures...

  I recommend you contact your router service provider to check if it supports this feature and if such can be activated by changing the settings of the router, a firmware update, etc.

  You can find more info on this requirement in reviwing Solution 2: check your router for compatibility Hello in any information from Mac OS X in the document below:

  http://support.HP.com/us-en/document/c02915280

• Try to add a page to a pages document. It worked until now but just finished page 13 with text and photos and cannot add another page, using macbook pro with El Capitan and the most recent version of the Pages.

  Try to add a page to a pages document. It worked until now but just finished page 13 with text and photos and cannot add another page, using macbook pro with El Capitan and the most recent version of the Pages.

  You have placed your beam to insert at the end of your text on page 13 and then apply Insert menu: Page Break? In the v5.6.2, Pages I just add a new page to a section of four pages to this approach.

• Not fully functional mouse with MacBook Pro 2010. I can scroll up and down, but can not move the cursor.  The mouse works with my new Macbook 12. No mouse problem but Macbook Pro?

  Not fully functional mouse with MacBook Pro 2010. I can scroll up and down, but can not move the cursor.  The mouse works with my new Macbook 12. No mouse problem but Macbook Pro?

  What specific mouse?

• Wireless repeating with DG834 and D6200

  Hello

  I have a number of spare routers Netgear and I want to improve wireless in some areas of my property.

  I've considered using the D6200 with broadcast SSID disabled wireless base station and the wireless client access disabled.

  Securiyty must be turned off.

  I then wanted to take a couple of old DG834s and put in place in the relay, with the D6200 as the base station (the D6200 having their entries in the APs child table in the Station's basic config page).

  I wanted to then enable WPA - PSK on the DG834s in order to maintain security.

  This doesn't seem to work. The SSID of the DG834s is visible and I can enter the network password, but I can't get an IP address from the system (DHCP is disabled on all boxes I have a running separately in the network DHCP server).

  I can't use WPA - PSK on the DG834s Repeater? Is that why I can't I onnecter correctly?

  Or have I missed the point somewhere?

  Thank you

  Hello Nickc57

  These modems are not really designed to do this, you may want to consider getting extensions.

  DarrenM

• Toshiba software conflicts with Microsoft and prevent the wireless connection

  The Toshiba Software on this laptop I have is causing a conflict with Microsoft software and I can't connect wirelessly to an ad - hoc network. Wireless Auto configuration does not automatically start as Toshiba Software is causing a conflict, above, this rolling. If you have also encountered this problem please can you me what you can do to permanently solve this problem? For the moment, I have to go through a process of manually start the Wireless Zero Configuration services and fiddling around with disable and then re-enable wireless network connections if I'm lucky then it finally works, and I have internet! If you are unsure how to permanently solve this problem you know what the telephone support number is for Toshiba UK?

  Thank you very much

  John

  Hello John

  What model of laptop and operating system are you using?
  Do you use the preinstalled original Toshiba OS?

  If you want to talk with Toshiba Toshiba s call hotline in the United Kingdom. The number is on the Toshiba UK support page.

• Spybot scans stucks, problem with sweetIM and wininit.ini

  Original title: whats wininit.ini?

  Hello!

  I m not a nerd, I mean, I Don t know much about computers. So explain, maybe funny.
  Anyway, I've been runnung spybot today and there was trouble with sweetIM and wininit.ini. He could not get access and spybot all got stuck in this.
  It is marked that he got 183 entries and PUPSC. What it means? What can I do?
  Thank you

  Hello

  -What is the exact error message you received?

  Step 1:

  If SweetIM is causing issues with Spybot scan, I suggest you to uninstall it from the computer.

  Follow the steps mentioned in the site Web of SweetIM.

  http://www.SweetIM.com/uninstall/help_uninstall.asp

  Start a safe mode with network virus scan and check.

  Step 2: Launch a network in safe mode virus scan.

  Access the menu advanced startup options by turning on your computer and pressing the button F8 before Windows starts.

  Advanced startup options menu select SafeMode with networking

  http://Windows.Microsoft.com/en-SG/Windows-Vista/start-your-computer-in-safe-mode

  Perform a full scan PC using the Microsoft Safety Scanner and check if your computer is infected by viruses and remove threats from your computer.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Safety Scanner WARNING: There could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Hope this information helps you.