no signal when connecting my HP 2000-2d51SV via HDMI to my tv LG

Similar Questions

• Re: Satellite P300 - no sound when connecting computer laptop to TV via HDMI

  Hello

  I searched online on several sites and read the messages on this forum too but still could not find a solution that works.
  I plugged in the cable and instantly got video but no sound. This cable works fine with my PS3.

  I tried to set the audio device by default both HDMI and S/PDIF and reboot after each time, but it doesn't work!
  Also, when I choose HDMI as device and try clicking on the Test, I get an error message saying "cannot play the test tone".

  I checked for updates for the driver through Windows and it is said that there are no updates. I have a Satellite P300 laptop.

  Anyone have any ideas?

  Thank you
  Jen

  This means you have a perfect television image after activating the HDMI port but the problem is its only?

• Qosmio F50 - arrow signal when connected HDMI cable

  Hello

  I was able to connect my laptop to my LCD TV (LG LH4000) via HDMI, but all 3 ~ 5 seconds it seems to receive a signal of the up arrow.
  Let's say I'm reviewing some files in the windows Explorer and making the file, as if someone presses the arrow pointing upwards.

  This only happens when its connected via HDMI. As soon as I unplug the cable, he stops to do.

  I tried to look for similar problems, but no luck.

  Thanks for your help

  Hey Buddy,

  That s really strange, I must say...

  Did you test another monitor with HDMI connection?
  Have you tested another high quality HDMI cable?

  In addition, it would be interesting to know what operating system you have. Preinstalled operating system from Toshiba is installed?

• How to connect laptop HP 2000-329WM to HDMI TV

  Pls tell me how to connect laptop HP 2000-329WM on TV?

  My TV has HDMI Port.

  Made to digital signal output laptop video card support through VGA port function

  Will it work if I use cables in the links below

  http://www.Amazon.com/eForCity-gold-HDTV-adapter-cable/DP/B004S5H30I/ref=sr_1_fkmr0_3?s=electronics&...

  http://www.Amazon.com/video-cable-black-support-necessary/DP/B002TUC64W/ref=sr_1_fkmr0_1?s=electroni...

  Now there are ways to do it but unfortunately, it would be really expensive. The only possible way would be to change the graphics card which means basically replace the motherboard together.

• Connect XPS 17 LCD TV via HDMI cable

  I have a XPS 17 L701X- and I'm trying to connect it via HDMI cable for a 32 '' LCD TV Phillips girlfriend with backlight. However, no matter what I try, the laptop never acknowledges that the TV is there and vice versa. I tried to restart, reinstall the video drivers, fiddling with settings in the control panel for multiple screens, tried two new HDMI cables separated from Amazon - and nothing works. (The TV works fine when it connects its Macbook via HDMI). Can someone please help?

  Well Mitch, I advanced and bought this adapter part and, lo and behold, the work of workaround! First try also (at least in my case)-without debugging or diagnose.

  Process, my three steps:

  (1) I plugged the adapter Mini DisplayPort for my XPS (around the back next to the HDMI port); (2) I connected the HDMI cable to the adapter (the other end of the cable is already connected HDTV); (3) I have pressing F1 on my XPS and duplicate selected (key Windows + P or "Connect to a projector" If you work via Control Panel).

  (I used StarTech Mini DisplayPort HDMI adapter)

  -site of the factory that it lists as $22, but I bought mine from a local store of tech for less than half that price. I hope this helps!

• No sound through the TV speakers after connecting the dv7 - 1247 cl via hdmi

  I have connected my laptop to my harman kardon receiver via hdmi, which is connected to my HDTV.  The video shows big... looks great. But no sound is coming through the TV speakers.  I went to the audio options and an hdmi output chosen, but still no sound. Any ideas?

  Ty

  Hello

  Take the receiver the most out of the image and connect the laptop directly to the TV. Does your sound work now?  What SW you use for audio/video playback? MediaSmart? Try this also - disconnect the cable - release MediaSmart - plug the cable and then try again.

  Press Fn + F4 to switch to HDMI only. This action refreshes the screen, transfers to the screen from the laptop to the external display and audio now comes from the HDTV sound system.

• TV projects "No Signal" when connected to Aspire V5 - 122P

  I tried to connect my Aspire V5 - 122P to my Sony Bravia, but it displays 'No Signal'. Since my aspires to only the mini-Display port I tried the following, but still, it does not work:

  1 port mini-Display - VGA/HDMI cable

  2 port mini-Display - HDMI cable

  I hope someone could help me.

  PS.

  I tried to connect my front Apire to a projector via the port Mini-affichage - VGA cable and it worked fine.

  I went to the Service yesterday and had the guys here help me understand what the problem is. We tried several HDMI cables and still we get "No Signal". I tried to replace the screen Mini HDMI adapter that I use and it worked. So the main problem is the adapter.

  So for all of you who have problems similar to this, I suggest that you try and test several cables/adapters first.

  IronFly thanks for all the suggestions and help that he gave.

  Detective Conan.

• my digital TV show no signal when connected to the hdmi to my hplaptop port

  I plugged the hdmi to HDTV cable end and the other end to the hdmi port to my laptop HP in the off-mode, then I turned the laptop and the tv on and seledted in my TV HDMI input signal. After that a few seconds tv monitor displays the data recovery then it comed no signal .do I need to make changes in my hplaptop pls help to solve this problem. Thank you.

  Hi spkmd,

  Follow these methods.

  Method 1: Check with the manufacturer for the software update of the HDMI driver.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Method 2: There may be a combination of keys on the laptop to change to HDMI manually, usually a FN + F # combination. You'll need to refer to the documentation for the laptop to which key can control the HDMI. Also, check the manual that came with the TV.

  Method 3: You can also go into the display properties and change the default view for the HDMI. To check the display properties, follow these steps:

  (a) click Start, then Panel.

  (b) click appearance and themes, and then click display.

  (c) in the settings of the display properties dialog box tab, click the icon of the monitor that represents the monitor you want to designate as the primary monitor.

  (d) click to select the use this device as the primary monitor check box. Note that this check box is not available when you select the icon of the monitor that is currently set as your primary monitor.

  For more information, see the following link:

  How to configure and use multiple monitors in Windows XP

  http://support.Microsoft.com/kb/307873

• 'no signal' when connecting TV to computer laptop presario 900

  Original title: using a television to show the DVD screen is played on a computer laptop presario 900,.

  How can I use my TV screen to show a DVD is played on a presario 900, I connected both with a VGA cable, but the display shows "no signal".

  What do you mean, "I connected the two with a VGA cable. You have more than one TV, you have tried?

  Have you ensured that the laptop is out the signal from the VGA connector? Usually, you press a key (or key combination) to switch the signal between the built-in screen, external monitor, or both.

  It is possible, that you need to go to the display settings on the computer and turn on the external screen, but first check material method.

• Get a weak signal when connecting to internet

  * Original title: my problem is that my computer will have 3 bars of connection while my girlfriend in the same room will have full signal and I have no idea what the question is can someone

  I tried reseting my adapter and update the driver still no help

  Hello

  1. are you using the cable or wireless Internet connection?

  2. do you have a router connected to a computer?

  Please refer to the links and check if it helps.

  Why the my wireless signal strength is so low?

  http://Windows.Microsoft.com/is-is/Windows7/why-is-my-wireless-signal-strength-so-low

  Troubleshoot low wireless signal quality (applies to Windows 7 as well)

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-low-wireless-signal-quality-problems

  10 tips to help improve your wireless network

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=hq7zl63PiZ9

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if it helps!

• Acer sucks TC - 605 no signal when connected to 10 Windows HDTV

  I start my PC, see the Acer logo in the center of my screen and can access the configuration from there.

  As soon as the logo disappears my tv gives me a message "no signal".

  I tried with 2 hdmi, both give the same results, but do not have another monitor to test on.

  is probably a bad driver VGA, you can try to resolve this problem, uninstall drivers windows safe mode VGA.

  http://www.TomsHardware.co.UK/FAQ/ID-2569556/safe-mode-Windows.html

  You can try to enter windows 10 recovery by pressing Alt + F10, and then follow the instructions on the link above.

  If you are unable to enter safe mode, you will need to download a 10 bootable windows installation media and use it as a recovery disc to activate safe mode.

• HP ZBook 15 G3: BSOD when connecting to the HP Elite Thunderbolt 3 docking station

  I recently (yesterday, 16/08/16) began to experience the dreaded Blue Screen of Death, whenever my laptop is connected to my HP Elite Thunderbolt 3 Dock.

  The machine is a HP ZBook 15 G3. It was connected to the docking station for more than a month without this problem. I don't know why at the time because I don't remember any updates or new software before that happens.

  The dock is connected to 2 x monitors via HDMI cables and an ethernet cable. I connect a mouse and wireless keyboard to a USB3 port on the laptop.

  If the dock is connected to the laptop at the start, he reached the login screen front of BSOD. If I start without it connected, it will be BSOD a few seconds after connecting the dock. He never to the point where the monitors display anything. It can be started with the dock connected in Safe Mode, as it seems to disable job.

  I've updated all the drivers and BIOS (including download the Softpaq Download Manager), but there has been no change. I have also updated the NVIDIA drivers to the latest version without change.

  What should I do next to solve the problem?

  Did you analyze the dump files, they said?

  I would also like to update these:

  Intel's Thunderbolt sure Connect utility (15.3.40.275)
  Thunderbolt from Intel for the Dock Thunderbolt from HP (16.1.7.0.8) Firmware update
  ASMedia eXtensible Host Controller Driver (1.16.35.1)
  ASMedia ASM1042A Firmware Update for HP Thunderbolt 3 Dock (131025.10.11.23)

  More BIOS if you're not on 1.09 or 1.10, some people say that they have problems with 1.10, so maybe try downgrade to 1.09.

  You can also try experimenting with the 'Thunderbolt security level' setting in the bios security switching No. If it is authorized by the user, or vice versa.

• Satellite L500-13F connected to the TV with an HDMI - no sound on the TV cable

  Hello! Sorry, my English is bad.

  I have a problem, I tried to connect my laptop with TV via HDMI, but
  reading on laptop rather than TV sound...
  In Manager Realtek HD I found no "Options for HDMI output.

  Please, which suggests what should I do?

  Hello

  Have a look here, maybe it helps you:

  http://en.kioskea.NET/forum/affich-79711-laptop-sound-on-TV-with-HDMI-cable

• Qosmio F10-122: what are the pinouts of D-Terminal to connect the digital TV via HDMI

  I have the D-Terminal cable SCART, but this only works in analog (PAL) resolution.
  What are the pinouts of D-Terminal on nVidia FX Go5700 of GeForce to connect to a digital TV via HDMI and use higher resolutions?

  The F10 does not support HDMI port. It supports only the output port component.

  I've goggled a bit and found that you can use a HDMI adapter component
  There are also some adapters that support the resolution of the computer of the 1920 x 1200 px and 60 hertz
  So, you can connect this device to a monitor with HDMI port.

  Google for adapter * Gefen component and HDMI *.

  Good bye

• How to connect two computers via HDMI cable?

  Hello

  I need to connect my computer by another via HDMI cable to share files.

  1. are there available for this software?

  2. can I connect a Windows PC with Macbook via HDMI?

  HDMI for the video output, not to transfer files...

  See here for transfer files between a PC and a Mac.

  http://support.Apple.com/en-us/HT1408