No software - is it hardware - several issues on Mac with clean installation

Similar Questions

• Error: "corrupted error reports are rare. They can be caused by hardware or software problems and usually indicate a serious problem with your computer. »

  Original title: my computer was "rebuilt" with all the new parts June 2011. Logging on his shot and miss it may stay on or shut down and restart. I have this message when I turned on my pc this afternoon:

  Corrupted error report.

  Unfortunately, the error you report submitted is corrupted and cannot be analyzed. Reports "damaged errors are rare. They can be caused by hardware or software problems and usually indicate a serious problem with your computer.

  When I turned on pc today is showed a blue screen and can something on a disc because the disc did not work properly?

  I paid for all the new parts for my computer and the computer technician has assured me that all the work was completed and correct. I bought the power supply (1) mother board, cards (2) 1 TB of memory. (2) hard drives 1 TB. (1) card reader and other elements appearing on my Computer Geek Bill.

  My music files are no longer mp3 but .oma. He/the Tech added its own files and records of music of World War II. These game. The drive D drive or slave who held my music, he said he wiped clean.

  I need to know these error reports will completely close my pc and all the information will be lost?

  Hi satindoll11233,
   
  I recommend you to disable the auto reboot system error (this option prevents Windows to reboot automatically if a Windows error to fail) of the startup options safe mode to know the exact error message or error code originally this problem.
   
  For more information, see:

  A description of the options to start in Windows XP Mode

• Why after connect to my router it take 1-2 minutes to load the router's Web site? No software and the hardware has changed.

  Why after connect to my router it take 1-2 minutes to load the router's Web site? No software and the hardware has changed.

  Hello

  I suggest you check out the link to Linksys support:

  http://homesupport.Cisco.com/en-us/support

• Unable to connect to a wireless network - "the network card know driver or hardware related issues.

  Can someone help with the following problem please?

  I'm unable to connect to the wireless network.

  I have an Acer Aspire 5315 with an Atheros AR5007EG wireless adapter. This shows that "working properly" in the Device Manager. I tried to re - install the drivers for it constantly. They seem to everyone install ok but I still have the problem.

  The symptoms are...

  (1) if I try to set up a wireless connection, I get "unexpected error occurred". There is no useful looking for messages in the event viewer.

  (2) if I use "Diagnose and repair" I get "knows the network adapter driver or hardware related issues.

  I uninstalled everything which I think could be the cause of conflicts. I scanned for malware. I have run chkdsk and sfc. I have all the updates from Windows Update. I tried in Safe Mode with networking, but still get the same results.

  OS is Vista Home Basic 32-bit SP2.

  I would be grateful for any advice that might help solve this please.

  I have now re-installed Windows and everything works fine.  I still have no idea what caused the problem, or if it could have been set without a re - install.

  Thanks for the replies.

• Several issues having an impact on computer - security alert Windows

  Help. I'm a self confessed computer illiterate! It seems that whenever the update of Windows is running on my computer, it changes the settings & I encounter problems.

  I'm currently running Vista (please let me know what other details you might need) & I have Bitdefender. Windows Update ran & now I alert security windows saying there are several issues that affect my computer. I checked Bitdefender & all right with respect to any virus or malware etc. etc. When I click on icon - windows security alert - it opens the windows Security Center.

  Everything changed on or Ok. Like how windows tells me that there are several issues affecting my computer but then doesn't bother to go & tell me what they really are.

  Someone else has encountered this & know what it means or how I can fix this problem...

  I underestand that your Windows Security Center will tell you you have any questions, but when you open it, all right. If this is the problem then, it could be due to delay the departure of the Windows Security Center to monitor your anti-virus.

  I suggest defragnment and clean and updated Windows and make sure you have installed SP2, make sure that bitdefender is updated.

  Also, just check and make sure you have the latest version of bitdefender, please refer to:

  http://KB.BitDefender.com/site/Knowledgebase/article/711/

• Issue whith EXSi 4.1 installation

  Hello

  I have problems installing EXSi 4.1 on an Asus P5Q - E motherboard.

  The configuration is: a Sata CD and a Sata HDD not formatted, both on the controller Intel ICH10 Sata ports.

  CD starting it until the screen validation 'Type F11 to install' and just after tapping F11, the shutdown of the PC, a black screen with tracing appears.

  Last info is 'vmkctl. "HostCtlException: could not load module/usr/lib/VMware/vkmod/vmfs3: failed"

  I tried several times by different storage configuration of the BIOS (IDE, SATA AHCI) with the same result.

  So...

  Maybe this question related to access HARD drive, even if Intel ICH10 is reported to be taken in charge?

  In this case, the installation using a SATA PCI-E card (and also to access the RAID configuration) might work?

  Thank you very much.

  Explanaition given by asatorian seems to be right: ICH10 supported but impossible installation on native SATA drives.

  Many cases, ICH series 'works' If you change mode in the BIOS.  (for example: try "Legacy IDE" instead of AHCI or RAID.)  You will not get RAID, just readers.  (ESX only supports hardware RAID and non RAID software, which is what ICH is.)

  ... Does this mean he could work with a SATA drive, attached to a SATA/RAID controller card supported?

  Perhaps, but as already suggested, it is very probably do not have a supported network card.  ESX is very picky about what NIC and HD controller.

  That I found in this thread not supported motherboards that worked well with ESXi4.0, had problems with the installer for ESXi4.1.  Therefore, if you use your model of motherboard as you google somewhere that it worked with ESX, it could very well NOT work now with ESXi4.1 you can try what I did in this thread by installing on another system, and then moving the hard disk or USB on the motherboard.  Or install 4.0 and then upgrade to 4.1. But no guarantee.

• has had an alert that there is a problem with the installation of IntelliPoint software

  I got an alert that there is a problem with the installation of the IntelliPoint software. To resolve this problem, you must remove IntelliPoint software, and then run Intellipoint Setup again.  If I have remove it where do I go to run the installer?

  Hello

  You can go here: http://www.microsoft.com/hardware/en-us/downloads

  then select the keyboard and mouse or other device you can download the latest version of the Intellipoint software.

  Thank you...

  The thread is placed automatically in Windows.

• PowerEdge 1900 and Poweredge 840 and NO hardware RAID SATA HD, FreeNAS with ZFS

  I searched these forums and the web in general a concise my questions answer, but nothing is done.  I just happen to find someone who is using 'old' technology and it retarget as much as you might think (I am a broke student by the way).

  I bought a Poweredge 1900 Server & server Poweredge 840 ebay about last year.  I've been busy and have yet to work with these two units.  I wanted to use the PE 1900 as a file server and then push a backup of these files on the server off site, the PE840.  I intended to buy four 1 TB or four disks SATA 2 to (WD Black or RED WD) for each system, respectively.

  I've been through a few videos on youtube the other day and discovered FreeNAS.  This seems to be a much better solution than the use of Ubuntu Server, but it also made me think about the hardware Raid with these systems.  If FreeNAS uses ZFS (software raid controller), you want to avoid a hardware raid controller.

  My current assumptions, please correct me if I'm wrong on any of the following:

  I think that each of these systems to support drives up to 2 TB?, I think that I can use the SATA drives and not SAS, four discs in each system drives.

  I believe that I can boot from USB flash drive (a quick, which I intend to install FreeNAS on which they recommend)

  I think I can connect readers to the Perc/Raid Controller controller (& just turn 'off' RAID), or simply directly on the motherboard.  (What woud be the advantages/disadvantages of the use of the card or simply by using the Council)

  I intend on working with what I have right now (cheap and available), then once I get this configuration work that I take it out of the sand/lab sandbox, upgrade the processors and ram up my budget will allow and go live with the installation program (if it is still possible)

  From now on, they are sitting in a corner, begging to consume energy, and fans of polute the soundscape with their cries (PE1900 precisely).  I know that I could pursue other options but I already these two units.

  I really want to utilze FreeNAS its serving capacity file and ZFS for its reliability.  Is it possible with this camera?, or should I junk them and move on?

  Thank you for your answer!

  I've done some research more and since FreeNAS is built off of FreeBSD supported hardware is the same.  I couldn't find a list for FreeNAS specifically so I looked to FreeBSD.  I was still confused about the material and decided to go forward with the poweredge 840, for two reaasons, there already 8 GB of ram and it is not as heavy to move on (from 1900). I shoot the raid controller (for simplicity) and I plugged in three 250 GB SATA drives and a 40 GB SSD.  I had to set the bios for the usb key is recognized and also due to adapt to be considered as a hard drive, then had to define the sequence of boot to the usb drive, acting as a hard drive.  Once all that has been said and done, I wrote my FreeNAS image on my USB and booted up.

  It took maybe 10 minutes and I was up and running (once I had configured the hardware and bios), I created a RaidZ (as proposed FreeNAS) and with my three 250 GB drives, it produced 453 GB of usable disk space.  The 40 GB SSD is used as L2ARC (from my cache of understanding), I tried the installer with and without the 40 GB SSD.  The difference was impressive, just opening the photos or streaming video on my laptop Win 8.1 (Dell 17r) is almost flawless, as if the files were stored locally.

  I was impressed by how quick and easy to use FreeNAS, simple and fast network shares can be configured with permissions that works quite simply not in less than 5 minutes.  I don't have Windows Server down, but generally configuration active directory takes a little more effort.

  I am satisfied for the moment and continues to experiment with the Poweredge 840 until I commit to a processor upgrade.  Once I acquire 16 GB memory for my Poweredge 1900 I will perform with her, as it has only 1 GB now, crazy.

  Thank you for your help.

• How can I get rid of a redirect virus. It is not DNS, I checked several times. I scanned my Mac with Malware bytes multiple times. He is yet to come. I am very confused. Help me!

  I'm on MacBook Pro (retina, 15 inch, mid-2015) how can I get rid of a redirect virus. I use Google Chrome. It is not DNS, I checked several times. I scanned my Mac with Malware bytes multiple times. He is yet to come. I am very confused. Help me!

  http://Syndication.ExoClick.com/splash.php?IDZone=1758202&type=8

  It's the kind of redirects that I get all the time

• Cannot install this hardware. An error occurred during the installation of the device

  Can someone please HELP ME - I get the following error message: cannot install this hardware. An error occurred during the installation of the device. They system cannot find the specified file.

  I am not able to connect any hardware. It started all of a sudden. I can't connect my mouse so it before I'm not able to use my computer.  He did the same thing when I put in a USB key, there was the same error message.

  If something is damaged? How can I resolve this - pleaseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee.

  Looks like you may have a virus or other malware. Get your updated antivirus program and start safe mode.  Note that some viruses can hide from your normal antivirus program, so you really need to scan mode without failure.  To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode.  Then run a complete system scan.
  Microsoft has suggestions and offerings to
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
  Moderator Forum Keith has a few suggestions along this line to
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3
  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem.  To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore.  Click on the box that says show more restore points.
  You can check the corrupted system files.  Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE, then click on run as administrator. Then from the command prompt, type sfc/scannow.
  Finally if all else fails, you can look at the rather cryptic system event log.  To make, click Start-> Control Panel-> administration-> event viewer tools.  Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
   
  I hope this helps.  Good luck.

• HPPIW. EXE does not solve the problem with the installation of the complete software for 8500 A909g

  Waterboy71 - sorry for a new position, but the forum is read-only (?) so I can't respond to your response to my problem with the installation of the driver/software 8500 A909g.  By your answer on 5/19, I downloaded HPPIW. EXE and it ran.  It detects my wireless printer, but it tells me that "the selected printer is not supported by this wizard."  Is there another thing I can do to install the software so that I can scan and fax from my Windows laptop 8.1?

  Hello
  If please try following the steps below and check if this can solve the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• Hello; During the installation of the Software Photoshop and lightroom, there s blocked has the known installation 'wait '. What needs to be done?

  Hello; During the installation of the Software Photoshop and lightroom, there s blocked has the known installation 'wait '. What needs to be done?

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• I tried to install Illustrator several times. He finished the installation, and then when I click on it to open it it says error: 16

  I tried to install Illustrator several times. He finished the installation, and then when I click on it to open it it says error: 16

  Error 16 http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html

  -including DW039, https://forums.adobe.com/thread/1500609

• If I uninstall the software that I just bought, can I reinstall with another predefined language without pay anything?

  If I uninstall the software that I just bought, can I reinstall with another predefined language without pay anything?

  I can depend on what you buy.

  CS6 - you can exchange languages/platforms for a newer version product if you follow the instructions on the following link:

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Order-Product-Platform-Language-swap.htm

  Creative cloud - change the language setting of your Cloud Creative applications

• Hello good I would like to cancel the annual plan of adobe audition, because I had problems with the software and the Bank, if I can help with this please.

  Hello good I would like to cancel the annual plan of adobe audition,

  As I have had problems with the software and the Bank, if I can help with that please.

  Please contact customer support for cancellation & refund of the next purchase. Contact the customer service

  Creative single-app cloud membership for Adobe Audition (one year)

  Subscription Office

  March 11, 2015

  In the case of any questions, please let us know, I can certainly go for you.

  Concerning

  Baudier