No sound after IP glitch affecting mobile & TV without success after the restoration

Similar Questions

• audio files do not play sound after the restoration of the links

  I recently moved to a project from one disk to another.

  When I opened it the project folder I had to recreate a link to all the media which seemed to have a lot of success. However the audio files do not seem to play any sound. When I tell one of the audio files in the finder window, it take me for an alias file. When I try to open this file, it indicates that the original file cannot be found.

  I tried to remove the entire library of files sound and re-import them back in. But still, it does not solve this ridiculous issue.

  Any suggestions?

  Thank you

  Karl

  Are music protected audio files?

  Russ

• No sound after the removal of Norton and Mcaffe installation

  No sound after the removal of Norton and Mcaffe installation

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• How to eliminate the split after the restoration of browser screen?

  FF 29.0.1 running on OS x 10.8. From time to time, from FF (after killing him) and the restoration of all sessions, results in each window with tabs displayed in a split screen. The upper part is about 4 "high, followed by a seam, then the site itself. Resizing can completely eliminate the useful portion--unable to shrink beyond the joint.

  Open a new tab results in a screen divided; Open a new window appears normally.

  The problem occurs only after the restoration of the tabs - never when FF is normally closed.

  Suggestions?
  Thank you.

  Hi nxtr, your test Mode without fail gives strongly suggests that one of your extensions is to create the gap.

  If you have not checked recently updates to the extension, you can do it from the page modules. Either:

  • Command + shift + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then, above the list, click on the "gear" button Check for Updates.

  If they are already up-to-date, you can try to disable selectively non essential. I hope that the problem is caused by one of.

• Explorer.EXE error after the restoration of the ERD Commander

  Dell Inspiron B130

  Windows XP Service Pack 2

  Recently performed a HD format and new installation of XP SP2. After I installed all the drivers and others, I checked that the system was operating normally. After a few days of use, Windows Update downloaded Service Pack 3 and asked me to install. I started to install SP3, but at about 50%, the laptop battery is dead at Midway through the installation. I plugged the laptop on the power source and power. I restarted the laptop and XP started only a completely black screen and the white slider. No ALT + CTRL + DEL, desktop icons, etc.

  I rebooted the laptop of ERD Commander, ran the restore system and selected the first available Restore Point. Point of restoration chosen was recorded a few days before, and was the first recorded point after the clean installed XP. I rebooted the XP system. Wallpaper loaded with white cursor, but NO start menu or desktop icon. A message appears saying "Explorer.EXE Application error, press OK to exit the application" or something very similar. Did not write the error code, but can get if necessary. If I press the OK button (which is my only option), there is still no icons on the desktop or the start menu. Only the cursor. No access ALT + CTRL + DELETE or something like that.

  Thinking about completely wipe the system and reinstalls the operating system. Any suggestions before I jump in this solution?

  Explorer.EXE error after the Restore Point of ERD Commander. Dell Inspiron B130. Recently clean installed XP SP2 on laptop. Installation of SP3, to 50%, battery dies the laptop right in the middle of the installation of the SP3 update. Restarted, XP starts with black screen with cursor only. ERD restart order and restore XP to the last known good config (I choose point immediately after XP clean install). Reboot to XP. Now the wallpaper shows as well as the error message saying "Explorer.exe Application error, click OK to exit Explorer" dialog and then I can't access anything. Any ideas?

  Hello

  What is the full and exact error message?

  Step 1: Check if you are able to boot into safe mode without any problem. If you are able to boot into safe mode without any problems then try to perform the clean boot to safe mode. Also disconnect any external devices connected to the computer.

  Reference:
  To start the computer in safe mode
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Step 2: If you are still having the same problem, then you can the steps at the bottom of the article.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

• Error 16 after the restoration of Photoshop Time machine

  My HARD drive died. After the restoration of Photoshop CS6 and Photoshop Time CC14 Machine again SSD or opens. I get the error 16. I restored adobe all the library files and all permissions are correct.

  Migration of Mac with Time Machine WILL NOT WORK with the Adobe program activations due to hidden registration files

  Sign out of your account... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and prior to the relocation is necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Sign in to your account... Reinstall

• How can I restore Adobe Acrobat Professional XI (bought earlier this year, in February; education version) after the restoration of Windows 7 to factory settings? I tried the download link provided by email I received when I just bought, but it didn't wor

  How can I restore Adobe Acrobat Professional XI (bought earlier this year, in February; education version) after the restoration of Windows 7 to factory settings? I tried the download link provided by email I received when I just bought but it did not work.

  Hello

  Use the following link to download:-

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-downloads.html

• Cannot reinstall PSE 7 after the restoration of PC (Win XP). Impossible to uninstall, STUCK. Help, please.

  Error message when you try to start the 7 Elements after the restoration of PC (Win XP) "couldn't start b/c the application configuration is incorrect". When you try to uninstall 7, it doesn't appear in the Conrol Panel. But there is a Photoshop 7 folder in Program files. If someone could HELP Please, it would be greatly appreciated. I use this program so much!

  Thank you in advance...

  Here's the Adobe documentation to manually uninstall PSE7:

  http://kb2.Adobe.com/CPS/405/kb405847.html

  Ken

• Database is underway after the restore and recovery

  Database is in the waiting state after the restore and recovery.
  The database cannot start today and it displays an error message: 2 log file can be archived. Then I run the following command:

  SQL> select group#, sequence#, bytes, members, status from v$log;
  
      GROUP#  SEQUENCE#      BYTES    MEMBERS STATUS
  ---------- ---------- ---------- ---------- ----------------
           1        452   52428800          1 CURRENT
           3        451   52428800          1 INACTIVE
           2        450   52428800          1 INACTIVE
  SQL> ALTER DATABASE CLEAR UNARCHIVED LOGFILE GROUP 3;
  
  Database altered.
  
  SQL> ALTER DATABASE CLEAR UNARCHIVED LOGFILE GROUP 2;
  
  Database altered.
  SQL> alter database open;
  
  Database altered.
  
  SQL> shutdown immediate;
  ORA-01109: database not open
  
  
  Database dismounted.
  ORACLE instance shut down.
  SQL> startup
  ORACLE instance started.
  
  Total System Global Area  566231040 bytes
  Fixed Size                  1220580 bytes
  Variable Size             125829148 bytes
  Database Buffers          432013312 bytes
  Redo Buffers                7168000 bytes
  Database mounted.
  Database opened.

  But when I try to log on by using the EM console, it shows that the database is not open. Then I restore and recover the database by using the EM Console. But the database and then enter in pending status.
  What to do next?

  Stop the console 'EM, and then restart it. I hope all is well.

• No sound after the s7530n pavilion slimline for Windows 7 RC1 upgrade

  I know that Windows 7 is still in version final candidate and so is not taken in charge by Wells, anyone, but I've seen some people have luck on this forum so I'm him kicking.

  I have a HP slimline s7530n Pavilion that came with Windows XP Media Center is installed.  I recently upgraded to Windows 7 RC1 (as well as all the other computers in my home) because of the extra boost of incredible performances provided by Windows 7, as well as the best new Media Center.  Unfortunately, while Windows 7 works fine on all my other systems, it fails in two areas on this slimline: it is not up to run Aero/Glass (which is not a problem, do not need glass on this system), but unfortunately the sound work no longer, which is a real disappointment, because Media Center is kinda useless without audio :-)

  When I move my mouse over the volume icon in the system tray ToolTip shows "no Audio output device is installed".  When I check under ' audio, video and game controllers "in Device Manager, there is only a single element:"High definition Audio Device", which says that it is working properly.

  Steps, I tried to solve the problems:

  -J' uninstalled the "High Definition Audio Device" in the Device Manager and rebooted.  It is automatically re - installs, but does not solve the problem.

  -J' downloaded the audio driver for Vista for this PC from the HP support page: "Realtek High Definition Audio Driver Update" - sp34998.exe.  I tried to install it directly, but got an error 'failure '.  Then I extracted all the files in a folder, right click on the "setup.exe" inside and set to run in compatibility of Vista and as an administrator, but running mode later, he gave the same "failed" error.  I then uninstalled the driver "High definition Audio Device" in Manager of peripheral and before restart, run sp34998 (in Vista compatibility and as administrator mode) configuration file, and this time installed without error.  He then asked to reboot.  After reboot, Windows 7 automatically reinstalled the driver of "High definition" Audio Device as before, and I'm back to square one, still no sound, even if "RealTek High Definition Audio Driver" does not in Add/Remove programs in Control Panel.

  -J' I uninstalled RealTek Vista driver and the "high definition Audio Device", then downloaded the original XP driver: ' Summer 2006 Original high definition Audio Drivers Realtek '-sp26730.exe the HP support page.  Same experience driver Vista, with some slight differences - even if I extracted the files, and then told the setup.exe to launch in Windows XP SP2 and administrator mode, that it fails eventually, but with messages such as "cann't find Match RealTek HD Audio Inf file!  (Yes, it's accurate, complete with broken and misspelled grammar "Cann't" error message).

  So I'm puzzled - I should anticipate problems with Windows 7 for embedded with audio systems, but my old Dell laptop for 6 year, works very well with Windows 7 and it has integrated everything (same course glass!), so if anyone has any advice I'm all ears.

  Thank you!

  and don't you know - after that for troubleshooting like a week and a half, I finally posted my question on this forum in desperation, and five minutes after the validation, I discovered the solution on my own.

  So for those who have this particular problem, please go to the RealTek page:

  http://www.Realtek.com.tw/

  Click on the "Downloads" link at the top.

  Click on the first link on the page: High Definition Audio Codecs (software)

  Check the box "I agree" to the legalese and then click the next button when it becomes available

  For the fifth result in the list, "Vista, Windows7 Driver (32/64 bits) driver only (executable file)", click on the 'GO' link to the right (I chose "Site 1"), then download the file to your desktop.

  If you have any audio drivers RealTek HP installed under the Control Panel, uninstall and restart.

  Then, run the executable RealTek above (when he throws an error message saying "Windows cannot verify the Publisher" click to install anyway), then restart.

  When your system returns to the top, you have the sound!  I am very happy.

• No sound after the takeover by Satellite C50 - from standby or sleep

  I had downgraded the C50 Toshiba Windows 8 for Windows 7 64-bit and downloaded all the drivers linked from Toshiba's web site, but there is no sound on the phone, after that I have to put the computer on standby or into hibernation. The sound on the right corner icon is present and active.

  I already uninstalled the audio driver in the Device Manager and rebooted the computer.
  This work of t n.
  Also I tried to install a new version of the audio driver Toshiba s website again, once again, no noise.

  If I do a full stop down or restart the laptop the sound is back to normal. Sometimes it is not as well...

  I didn't start-> Run-> enter services.msc. Check the status of the Windows Audio service is started.
  but once again, NO HELP.

  All windows updates are up to date. 7(64bit) is: Windows Ultimate SP1

  I have all the virus scan of the computer, he found nothing.

  I rang Toshiba customer support, they ask for 45 pounds (GBP) to pay for technical assistance.
  It is the stupid things that technical support is payable even though this computer is only 3 weeks.

  Can someone help me then?

  Hello

  What audio device is set as default in Control Panel-> sound-> tab reading after that the system wakes up from mode sleep?

  Check if the speakers are set by default.

  But to be honest, I think that the reading already tab settings are set correctly.

  In my opinion, you must reinstall the entire system once maybe that something was wrong during the first installation, who knows that everything is possible.

  After the new Win 7 installation ensure that the ITD and Toshiba Audio Enhancement Utility and DTS Studio sound driver are installed correctly.

• No sound - after the installation Win7 sp1

  I have no sound after win 7 sp1 app nor can I press FN - F6 to activate the sound. Any ideas?

  Thank you

  I forgot how I solved it, but it has been resolved. Thanks for the review

• No sound after the "Modernisation" of its CODEC

  I have a PC Enterttainment HP Pavilion dv4 - 2154 portable ca, Windows 7 operating system and after some diagnoses has been asked to upgrade the audio driver. Made, the sound of my machine became unstable and then the machine is locked. After a few hard reboots I had to disable and remove the new driver and attempted a the original Hp driver installation.

  Still no noise and lock to the top... Ideas or patches for this please?

  The document has been designed in such a way, that if you complete all steps, it is the likely hardware failure.
  Try to uninstall the IDT Audio drivers first, restart your computer, and then try the restore method.

  Make sure what you do all the steps in order after that, in the document.

  If this fails, the document refers to to test the hardware failure. Some units do not have a sound check, so you can contact support for more options if you get to this point: HP, in North America 1-800-474-6836 Technical Support. For all other regions, please click here.

• Lost after that computer woke up from his sleep and sound after the Microsoft Fix It

  Original title: no sound

  Hello.

  No sound from my computer.  The Conexant device work properly.  Volume is in place on the speakers and the sounds of Windows.  Windows Media Player is not cut.  No speakers or headphones are involved.

  This problem started a couple of weeks, when I ran Microsoft difficulty It Center.  I used the difficulty It Center because I always lost sound after that my computer is awake to being asleep, which means that I always had to reboot to get the sound.  But now there is no sound whatsoever.

  Can you help me?

  Hello

  You can refer to the following link to download the latest version of the Toshiba support drivers.

  Toshiba support

• No sound after the computer restarts

  No sound in Windows 7

  Well, I don't know exactly what happened, but I lost my sound in Windows 7. The first time, until I reinstalled it, it appeared after I restarted my computer. I went back several times through the system restore until he disappeared. I then reinstalled my computer and the sound was back. Then the same thing began to happen. When I get my sound back, I just lose it again after a reboot. I think the problem is Windows Update, but I could be wrong. My sound card drivers are still installed, there is simply no sound coming out of them.

  I remember a lot of it before I reinstalled it, but I have advanced and tried again anyway. Unfortunately, none of this has helped me. I did a system restore to before the update, and my sound is back. I also disabled automatic updates and the sound is after a reboot. No critical updates are available, all that's left is Silverlight, I installed right before it was all happening for the first time.

  Thank you for your help.