No sound after loading Windows 8 on PC from HP g60-553NR

Similar Questions

• Problems with sound after loading Windows 7 Ultimate

  I just loaded Windows 7 ultimate on my HP Pavilian m7100y.  I have no sound, the monitor is an HP vs19c and trendy top speakers.  Can someone please.

  Hello:

  See if this driver works...

  Accept the agreement, download and install the first driver on the list if you have installed W7 32 bit, second driver on the list if you have installed W7 64-bit.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• Satellite Pro U200 - no sound after installing Windows 7

  Hello

  I have a problem with sound after installing Windows 7 on a (PLUA1E) satellite Pro U200. No Win7 audio driver available on the Nordic pilot site. Help, please.

  G.Magnason

  Hey Buddy,

  Have you already checked the site Web of Toshiba itself?
  http://EU.computers.Toshiba-Europe.com

  I found a driver for Vista 32 bit and Vista drivers most also work on Windows 7 so it s worth a try! :)

• Compaq CQ58: No sound after upgrade Windows 10

  No sound after updating Windows 10.

  Installed HP Support Assistant, which came with a video to try a headphone jack with Windows 7, so no joy there.

  Tried several times scanning but "HP has encountered an error when trying to analyze your product."

  Although this suggests that the failure of the scan, produce a result: Driver (1)

  Under 'pilot', it says "Windows 10 drivers may be available via Windows Update".

  But I already tried Windows Technical Support, who drew a blank and referred me to HP!

  Hello:

  I recommend that you try the audio driver IDT W8.1 support page for your laptop.

  This works in most cases.

  This package contains the driver that allows Audio IDT high definition (HD) in the notebook models that are running a supported operating system.

  File name: sp58406.exe

  If the W8.1 driver does not have the noise at work, try this...

  Go to Device Manager and click to expand the category of audio, video and game controllers device.

  1. click on the Audio CODEC of IDT high definition in Device Manager.

  2. click on the driver tab.

  3. click on Update Driver...

  4-> select Browse my computer for driver software.

  5. Select-> Let pick me from a list of drivers for devices on my computer.

  6. Select Audio device high definition (not IDT high def...)  "This is important). and click Next.

  Warning message is displayed, but the answer Yes.

  7 Windows has updated your driver software.

  8 restart the PC

  Key is step 6

• HP Deskjet 1000 printer, model: J110a printer will not print after loading Windows 10

  After loading Windows 10 would not print my printer. I deleted the printer and HP all downloads for it and turn the computer off. Start the computer up, re-load the printer driver, plugged and tried a test page. I get a message in the lower right of the screen that says "file saved in the documents folder" and no page is printed.  I tried troubleshooting, but without success.

  Hey @Bandit64,

  Issue seems to be with the spooler, try the steps below and mark the port selected in the printer driver settings.

  If you use USB - selected port must be USB001 or DOT4

  If you use a network cable - selected port must be HP TCP/IP Standard.

  1. stop the spooler
  a. click on start, Control Panel, performance and Maintenance, administrative tools, then Services.
  b. scroll the list of services for the print spooler.
  c. right-click on print spooler and stop it.

  2 remove the files of spooling.
  a. click on my computer.
  b. go to C:\WINDOWS\system32\spool\PRINTERS\.
  c. remove all files in this folder.

  NOTE: If the spooler does not work properly, this folder must be empty when the machine is not printing. Normally, it removes these files in this folder after that they were sent to the printer. Delete blocked files can free the spooler and allow it to continue normal operation.

  3. restart the spooler.

  a. click on start, Control Panel, performance and Maintenance, administrative tools, then Services.
  b. scroll the list of services for the print spooler.
  c. right click on print and start spooler.

• No sound after installing windows on my hp 620 help 8

  No sound after installing windows on my hp 620 help 8

  I can't find your audio driver on the HP support page, but I was able to locate it, which is the same engine as yours, just the latest version. According to what is listed, it supports Windows 8. Give it a shot and let me know if it works for you.

  http://goo.GL/0IMBd

• HP d530: no sound after installing windows 7

  Help, please:

  My HP d530 sff (DG058A) no sound after that I installed windows 7, I think it is an ADI SoundMax AC97 Integrated Digital Audio Driver. Can you please link me to the driver audio latset.

  Concerning

  Hello:

  You should be able to use the driver Vista support page of your PC.  Install and reboot the PC.

  This package contains the audio driver for the ADI AC97 Digital Audio Controller integrated in the supported desktop models and operating systems. -Provides the initial version of the drivers for desktop models and operating systems supported.

  FTP://ftp.HP.com/pub/SoftPaq/sp36501-37000/sp36530.exe

• Got the error saying that unable to start Windows. Now, it freezes after loading Windows.

  Original title: Windows Recovery Error Question

  Earlier I was looking at my computer, running a virus because my computer scan playing strange earlier. Every time I start Windows, I would be spammed with windows titles 'open with... '. ». I managed to open the Task Manager and get rid of all of them, but my computer shifted significantly again. Whenever I close it and restart the same thing would happen. I opened my virus scanner and started running it. Of course, he had a virus.

  As I was waiting for the analysis at the end, my computer suddenly closed and restarted without any warning at all. It froze on the splash screen. To stop and restart my computer again, I received a message that says:

  "Unable to start Windows. A recent hardware or software change might be the cause. If Windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem. If the power was interrupted during startup, choose Start Windows normally. »

  I was given two options: Launch Startup Repair (recommended) and start Windows normally. When I select the Startup Repair tool, I am taken to a screen with a loading bar that says "Windows is loading files... ». After loading, the screen would freeze. If I try the other option, I am taken to the splash screen and it would freeze.

  Is it possible to fix this? Any help would be greatly appreciated.

  Hello

  I suggest to unplug an external device connected to the computer and then try to start the computer and check if it helps.

  Otherwise I suggest you to contact the computer manufacturer for help.

• No sound after installing windows 7 ultimate.

  I bought a new HARD drive, installed windows 7 ultimate, there is no sound after installing windows7 ultimate.

  When I attach my old HARD drive, windows XP, I get the sound.

  Device Manager shows no error.

  Pls correct me or direct me to over come this problem

  email * address email is removed from the privacy *

  Thank you

  If your computer has problems play a sound, try using the Audio playback problems resolution to solve the problem. For measures and additional information, see o ink below.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-troubleshooterOpen

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=hardware

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• No sound after installing Windows Update KB2962407 on Windows 8

  After installing Windows Update KB2962407 (RT of Windows, Windows 8 and Windows Server 2012 cumulative hotfix: June 2014), the PC loses all the sounds.  Its returns if I uninstall this update.

  Hello

  Microsoft has confirmed that this problem occurs on some Windows 8 PC.  You can solve this problem by opting for Windows 8.1.

  Microsoft made in Windows Update KB2962407 to fix this problem.  While installing Windows 8.1 is the preferred method, you can also resolve this problem in Windows 8 by checking the updates of Windows and reinstall Windows Update KB2962407 .

• After loading Windows - crashes BSOD on Portege A200

  Portege A200 Windows XP;

  Before windows has finished loading a blue screen appears and the machine stops. Prior to that, the machine was intermittenlty off without apparent reason. The last thing I did before this happened has been updated to IE 7. Ran scandisk, but has not fixed anything.

  Can start in safe mode but impossible to uninstall IE7 in safe mode. The option selected to load windows last config that worked to option, but windows crashes before the end of loading. Restoration of the system to consider the return to January 08 but still the same problem.

  Any advice would be appreciated.

  In this case, I would recommend do you a clean installation of OS. As you can see that nothing done. I don't really know what you can try, but I really don't think that you will be able to do anything.

  Save all your data important and make the clean OS installation. I know it's quite radical solution but, believe me, one that suits.

• No sound after installing Windows 7

  I have a m7060n of four years, HP Media Center with 3 GB of memory.  The only sound work on my system is the headset before green.  I have a Logitech 5.1 speaker system that worked well until the installation.  There are two yellow triangles related video and audio in the list of equipment:

  Conexant 23880 Video Capture (input to two Blackbird NTSC)

  Conexant 2388 x MPEG Encoder (double entry)

  The High Definition Audio Controller and high definition Audio Device both seem to work fine.

  I installed all the drivers that I can find that might help.

  Logitech said that my speaker model is compatible with Win 7.

  HP does not even list Windows 7 as an OS when I look... only XP and Vista updates.  Updates for Vista have nothing to do with the sound.

  Windows Update has given me several new drivers, including those for two devices of Conexant.

  So far, nothing has worked.  I use a workaround solution by plugging the green plug from the speakers to the front Jack, but gives me only 2.0 sound not 5.1.

  Someone at - it any other suggestions?

  Thank you

  Christie

  Hi Christieamber,

  Try to install the driver provided by Realtek (the original creators of your audio device): http://www.realtek.com.tw/downloads/

  Just select the link High Definition Audio Codecs, accept the agreement and then select the version of Win 7 in the resulting page.

  Let us know how it goes.

• No sound after the takeover by Satellite C50 - from standby or sleep

  I had downgraded the C50 Toshiba Windows 8 for Windows 7 64-bit and downloaded all the drivers linked from Toshiba's web site, but there is no sound on the phone, after that I have to put the computer on standby or into hibernation. The sound on the right corner icon is present and active.

  I already uninstalled the audio driver in the Device Manager and rebooted the computer.
  This work of t n.
  Also I tried to install a new version of the audio driver Toshiba s website again, once again, no noise.

  If I do a full stop down or restart the laptop the sound is back to normal. Sometimes it is not as well...

  I didn't start-> Run-> enter services.msc. Check the status of the Windows Audio service is started.
  but once again, NO HELP.

  All windows updates are up to date. 7(64bit) is: Windows Ultimate SP1

  I have all the virus scan of the computer, he found nothing.

  I rang Toshiba customer support, they ask for 45 pounds (GBP) to pay for technical assistance.
  It is the stupid things that technical support is payable even though this computer is only 3 weeks.

  Can someone help me then?

  Hello

  What audio device is set as default in Control Panel-> sound-> tab reading after that the system wakes up from mode sleep?

  Check if the speakers are set by default.

  But to be honest, I think that the reading already tab settings are set correctly.

  In my opinion, you must reinstall the entire system once maybe that something was wrong during the first installation, who knows that everything is possible.

  After the new Win 7 installation ensure that the ITD and Toshiba Audio Enhancement Utility and DTS Studio sound driver are installed correctly.

• Satellite A200 - screen crashes after loading Windows 7

  Intro - programmer by trade, material not my thing.
  I have a PSAF0A Sat A200-04Y019 with 1 GB mem. Intel Cpu T2080 1.73 GHz
  Toshiba MK8037GSX ATA hard drive
  Chipset Mobile Intel 945 Express display adapter family

  Has been running Windows Vista ok.

  I've upgraded to Windows 7 Professional the screen would freeze or have multi color lines on it. Only way out was to turn it off. Tried to do the window updates and update driver without success, it does not solve the problem. I decided to reformat the disk (partition Toshiba always leaving here) and install XP. Had problems to find the drivers and then had problems trying to load them.

  Tried the option "press the button / stop and press 0 (zero)" to try to restore factory default, but it did not work. It shows the Toshiba screen and then something flashes in the lower left corner of the screen and then boots into windows
  So, after careful consideration (and a few beers) I decided it was better to go forward as backward and reinstalled Windows 7. Still have the same problem, but I noticed if I boot in safe mode or safe mode command, the laptop is fine.

  I went to the Toshiba page support download and the have not not all drivers for Windows 7. So I downloaded the vista drivers, but I get an error when I try to install, operationg wrong version for this configuration.

  I can try fix my problem? (Besides that throw the laptop at the door and see how many times it will bounce) :)

  Brian

  Hey Buddy,

  > Was Windows Vista ok.
  Sounds like this one are a pilot or if preinstalled software problem Vista runs correctly.

  In addition, I think that your laptop isn't Windows 7 supported if you can t get drivers here. You can try the Vista drivers, but if they don't work, to look for the drivers yourself. Maybe another model uses the same material but with Windows 7 supports.

  In my opinion the best choice using Vista if everything is working properly there.

• No sound after restarting Windows

  Windows 7 family

  Dell Studio 1555 laptop

  My sound does not work at the restart and there is a red X through the icon audio on the lower right of the screen.  I use the sound windows troubleshooting tool and it identifies that a sound driver is missing.  He finds and loads the HighDef IDT AUDIO CODEC driver and the sound works fine.  However, at the next restart, I have to repeat this process.  It started when I had to replace the hard drive and reloading everything.  I've updated my drivers Dell after reloading.

  The computer will not hold back the correction of pilot and remains fixed.  How do I stop this so the new driver is retained?

  Thank you!!

  Mark

  Hello Mark,

  Thank you for using Microsoft Community.

  1 did you change on your computer?

  Please see the following link that talks about this kind of behavior:
  In Windows 7 a red "X" may appear on the speaker in the notification area icon, even if the functions of audio output correctly
  http://support.Microsoft.com/kb/2011656

  This problem can happen sometimes during periods of heavy disk activity when starting Windows desktop computer.

  I also suggest you to uninstall and reinstall the sound card drivers and make sure that you install the latest version of the drivers of sound card on the Dell website.

  Please use following steps:

  a. press Windows + R keys and type devmgmt.msc in the run window and press ENTER.

  b. expand sound, video and game controllers, right click on the audio driver and click on uninstall.

  c. restart the computer.

  (d) download and install the audio driver from this link:
  http://www.Dell.com/support/drivers/us/en/19/product/Studio-1555

  Additional information:

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows/tips-fixing-common-sound-problems#tips-fixing-common-sound-problems=Windows-7

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab2&V3H=winvistatab1&v4h=winxptab1

  Please answer with results so that we can help you further.

  Thank you