No sound after SP1 update

Similar Questions

• No sound after sp1 and sp2 update... How to fix?

  After the upgrade to sp1 and sp2 and ie9, I have no sound on my acer aspire 5610Z... has almost everything to solve the problem without success. No start the thread more don't sound, no sound on youtube, or through any browser either. Yahoo Messenger does not even recognize my microphone and speakers...

  Although, I installed the latest version of the realtek driver, I hear my sounds of yahoo pool and the speaker works... However, tests sounds in windows, does not!
  How to get her back!     .. Help!...
  Please return answer: * e-mail address is removed from the privacy *.

  Hi ClaraKlambauer,

  You get the error message?

  Method 1: Users have solved similar issue by following the steps mentioned in the link below http://answers.microsoft.com/en-us/windows/forum/windows_vista-sound/i-have-no-sound-after-installing-a-service-pack/f16247af-313a-418d-915e-6403012c25eb

  Method 2: You can follow the steps mentioned in the link below

  No noise in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• Satellite R630 - problems of Driver on Win 7 64 bit after SP1 update

  That need your help here guys.

  My R - 630 Satellite is less than a year, under a Windows 7 Home Premium 64 - bit. For awhile, I've known BSOD, which I traced him through the observer of events here: http://technet.microsoft.com/en-us/library/dd337789 (WS.10) .aspx

  This has not led me far enough.
  Finally, I have found through other forums that the SP1 update would solve some of the annoying problems BSOD and I started the download and upgrade. However, when the computer reboots, while my laptop seems to have been healed (so far) of the BSOD, I have problems with drivers for:

  -Sound card
  -USB controllers
  -DVD player
  -Webcam
  -Bus enumerators

  I downloaded the indicated Win 7-64 bit drivers in each case. I tried to install the first. Nothing happened. I uninstalled the existing and installed new drivers. Nothing happened again.

  I thought I should do things in the right order.
  So I tried to install
  (1) the Chip Set Utility (drivers?) first, then
  (2) the USB drivers
  (3) sound card drivers etc.

  Nothing happens not always.

  I'm running out of ideas here.

  PS while other drivers run very well when I extracted the .zip format, the sound card driver, refused to run, even if the box "run command" has been checked when executing the .msi file.
  I've pulled into a folder and ran it manually.

  Still did not help.

  Hello

  What happens if you set the Windows operating system to the point before the SP1 has been installed?
  That you get the BSOD?

  I would recommend this doing.
  Use the Windows option that allows you to activate the operating system at the point of time at the beginning.
  Then, test the functionality of the OS.

  If everything works correctly, update the Win 7 64 bit with SP1.
  You must use the automatic update of Windows 7.

• No sound after Skype update

  While signing in to my account, Skype closed and made an update. After the update is complete, I realized that I had no sound Skype at all. I hear anything in Skype calls to notifications. I tried everything I can think of. I checked my sound settings, made sure that Skype was not cut in the mixer, made sure that my volume was set correctly, rebooted my computer and Skype and finally verified online. In the audio settings in Skype, Skype record it sound out, and he said he's going to the right place. Help would be appreciated!

  Solved, it seems that my headphone cable is broken and only allows sounds through, set in her jiggling in making...

• There is no sound after an update by microsoft.

  Original title:

  after update by microsoft my sound disappeared... x on it and says not connected speakers... Yes they are

  I'm troubleed by this problem... after your update my sound does NOT work... He says speakers not plugged and theres a red circle with the x in it... Please explain what I need to do to solve this problem... it SUCKS... why this happens to you all the time? I am disabled and can't do what tom... PLEASE HELP ME

  Hello

  1. what update has the problem from occurring?

  Updated version has a problem in the history of the update.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  2. what operating system is installed on the computer?

  Method 1:

  You can try the steps from the following link and check if it works:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2:

  You can try the steps from the following link and check if it solves the problem:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Let us know if it helps!

• No Logitech G35 headset sound after Windows updates

  Original title: last updated

  Twenty minutes earlier on 11/08/2011 my self out of the windows updated. After the update has been installed and restarted my computer, my logitech g35 headset is not working properly. If I turn them off in the control panel and reactivate as default device, I get 1-3 seconds of the sound before they be cut again. So two questions. 1 What is this happened to someone else. 2. how to fix it.

  Hi Hexter23,

  1. what application you are trying to use the headset?

  2 update did you recently installed on the system?

  3. are you able to hear the music / sound through normal speakers?

  Method 1:

  You can consult the following link and run the troubleshooter of audio playback, if it helps.

  Tips for solving common audio problems

  Method 2:

  If the previous step fails, then manually, download and install the latest audio drivers for the card its installed on the computer by visiting the sound card manufacturer or computer manufacturer's website and check if that helps.

  Updated a hardware driver that is not working properly

  Hope this information is useful.

• spectrum 360: no sound after windows update

  Hello

  As a result of an update to windows 10 for the anniversary edition, I had problems with the sound.

  It says the audio device not detected.  I uninstalled the audio drivers and reinstalled them and it will work, but after restarting the computer, it gives the same error.  Sometimes a reboot it will work again, otherwise have to reinstall again.

  I couldn't run constantly, so I restored windows on the previous generation and it works well again.

  Anyone had this problem or could fix?

  Thank you

  Thank you.

  I ended up doing something like that.  I uninstalled the program conexant himself and installed an older driver (9.0.57.0), and so far it has worked.  I got the driver from the hp support page.

  The new driver worked until a reboot, then had to be reinstalled again.

  I thank once again.

• No sound after an update from Toshiba

  I followed the instructions of what looked like the official update from Toshiba to uninstall something I don't remember exactly what, but I was directed to the Panel, sysytems and something to do with video, etc, and now I have no sound. System says no audion output device is installed.

  I must say from my experience, this time with a Toshiba Satellite is less satisfactory, always goes into hibernation and is difficult to restart, even after updating the BIOS suggested!

  Hello Wan

  And what model of laptop you have exactly?

  I'm sorry, but how understanding your problem anyway, he can't remember what you did. Who knows what you do with your laptop. All other problems can be caused by your experiences and to do something to change the configuration of the operating system.

  In this case I recommend a radical, but for you, the best solution: back up all your data and install the OS by using recovery media delivered. I'm sure with the factory settings everything works well again.

• Tecra 9100 - loss of sound after Windows Update.

  I just got my hands on a 9100 second hand and have been re - install XP Pro. I was going well and had everything except the card SD not working after downloading all the drivers concerned off Toshiba site.

  Micorsofts update the site decided to download new drivers for the card his Yamaha, and now it says NO device.

  I reinstalled the drivers from the toshiba site, but despite everything I do, it still shows no device.

  Ive tried reinstalling the software Synth as well, but having said that I need to run the re-installation of synth program. But there is no directory on the drive for what Yamaha and no entry in the Add/Remove for yamaha synth window or in the start menu.

  I'm at a loss where to go then, short from once again and re-installing the OS to the top, and it's a good day's work.

  Is a cleanup utility exists then I can just redo the part of sound card?

  Help please. :-(

  Hello

  It seems that there is a problem with his Yamaha card driver after the installation of the Microsoft Windows XP SP2.

  Seems that you need to update the audio driver of Yamaha!

  After a short investigation, I found this site:

  [Do not install SP2 if you have a card his Yamaha AC - XG | http://www.housing.hawaii.edu/resources/support/yamahaac-xg.htm]

  Best regards

• Satellite P100-442 - sound after Vista update problem

  Vista Home Premium operating system.

  Since "Vista Update" installed a pilot of its new "Conexant high definition SmartAudio HD2", the sound does not work.
  It does that after I do a "ch for devices modified" via "Device Manager".
  But I do whenever I have start the laptop.
  Should I first remove this driver (and how?) and to install the driver on the Toshiba site?

  Try to restore to an earlier time using System Restore option.

  If everything works again DO NOT install updates for ALL pilot rating. Just install update marked as important. All others (optional) update SHOULD NOT be installed at all.

• NO SOUND AFTER WINDOWS UPDATE 8

  Hello

  Please help me, lost after installing important updates for Windows Mobile 8, all audio sounds. I don't know what happened. Bearly need an audio. Thanks in advance.

  Hello

  Try the following.

  Download the installer from IDT Audio relevant on the link below and save it in your downloads folder.

  IDT HD Audio Installer - Windows 8.1

  IDT HD Audio Installer - Windows 8

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When done, shut down the laptop by holding down the key SHIFT left click Shutdown to temporarily prevent a hybrid boot.

  Disconnect the power adapter and remove the battery.  Press and hold the power button for 20 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  Left click "Speakers/HP" once to highlight and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• No sound after Windows updates - don't Please Help!

  I just finished a full restore my system back to factory settings because I had no noise whatsoever.  After doing this, I had sound for a while, until some update has been installed and now I have not YET healthy.  It's extremely frustrating!  Given that the sound worked until one of the many updates has been installed, this leads me to believe that the update is the cause of the problem.  When I click on the sound tab, it shows that everything is working ok.  I tried everything I can think of to remedy to this problem.  I uninstalled, reinstalled and updated the driver for the sound.  It does not work.  I tried to use the restoration of the system to an earlier time and that doesn't work anymore (because there was not a lot of restore points because I had to complete my system restore.)  I don't know what to do to solve this problem.  I'd do another complete restore of my system, but I'm afraid that the updates will cause the same issue.  I'd appreciate any help!

  Looks like you already tried everything, but the following items may be worth a visit:

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  (valid for XP - Vista - 7)

  Solving audio problems in Windows Vista
  http://www.ehow.com/how-does_4966770_troubleshooting-sound-problems-Windows-Vista.html

• No Audio output device is installed - no sound after auto update yesterday

  After an automated update yesterday, my sound no longer works on my Dell XPS 15.  There is a red "X" on the "speaker" icon.  When I was looking for solution last night, I tried a lot of things and then saw a comment on a possible error in the download, but now I can not find this comment.  If there is an error in the update, will there be a fix soon?  I would use my sound.  Thank you!

  Hello

  Microsoft gives sometimes you updates for the 3rd party hardware: Audio, graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  Dell:

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  See you soon.

• TOSHIBA DVGW/HD TS-L802A-ATA does not work after SP1 update

  Hello

  My Toshiba TOSHIBA DVGW/HD TS-L802A-ATA won't allow windows Device Manager to load the system (pilot) since I've updated with Vista SP1.

  I tried uninstall the DVD but when I restart the driver didn't reinstall but I get a Code 19 notice saying the driver instalation failed.

  Any help will be much appreciated.
  Medicalman

  See also http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm

  Good bye

• Qosmio F30-111: no sound after the update of the 3.40 BIOS & Vista installation

  Hello!

  I have a Qosmio F30-111, originally with Windows MCE and all devices works fine, but I made an update of firmware BIOS to 3.40 (before was a version 1.x).

  Later, I installed Windows Vista Ultimate and all devices has been recognized very well (with Toshiba Vista drivers), but the sound was not working!
  The situation was:
  -The sound device has been recognized;
  -The MIC works (but I can't hear it);
  -The speakers do not work!<- the="" real="">

  Now I installed the recovery CD and I'm new to Windows MCE, but noise have the same problem... is recognized, but the speakers do not work.
  I have no idea what to do... I don't know if it is possible to restore the firmware (I think that was the problem).

  Don't forget: the audio device works, the works of Media Player, but I can't hear the sound (Yes, the volume is high and is not dumb)

  Sorry for my bad English,
  Thank you very much!

  Murilo

  Hello Md2

  You can hear the noise if you plug headphones into the audio?

  If there is his helmet and then the audio device works well.

  If not, then disconnect all devices external usb and start a clean installation of vista (not upgrade, but booting from the vista cd)

  don't forget to put the RAID driver on cd or diskette or usb flash key before doing the clean install of vista.