No sound after upgrading to windows 7 32 bit to 64 bit

Similar Questions

• I have no sound after upgrading to Windows 7. I have a Dell Inspiron 1420

  So I sound after upgrading to Windows 7. At one point, I get sound in my headphones. Now I have nothing. I have a Dell Inspiron 1420.

  [Moved from comments]

  Go to the website of Dell, put in your service tag, and download the driver for your audio.

  Good luck.

• bad sound after upgrading to windows 7

  I just finished upgrading my e 9520f pc to windows 7 (premium). The upgrade going without any problems until I jumped into a blu - ray disc. Let me tell you how I have my sound and video hanging. I have video (hdmi) running on tv (no problem) I have audio my receiver (coax) running, I hear speakers when playing music or youtube (same test ToneWorks) but get a hissing sound during playback of blu - ray discs.

  I have installed all updates for windows and hp media smart software after the upgrade (there were several besides). I went around a couple of times audio realtek. I get sound when I went from realtek to run audio through the hdmi cable. This looks like a cyberlink media or hp smart problem for me.

  any help or suggestions would be helpful

  Thanks in advance

  I would like to inform you about my sound problem. I fixed my problem with my sound of bd. When I first upgraded to windows 7, I didn't have the option to roll back the realtek driver but since then updates in case of application and tonight I had the opportunity to roll back the driver, so he did. To my surprise this corrected the problem I had with reatek'a including dts and dolby digital digital output on the receiver.

• No sound after upgrading to Windows 7

  No sound in Windows 7

  Yesterday, I upgraded from XP to Windows 7. Once completed, I tried to listen to music. Sound indication bar was moving, but I couldn't hear anything. I checked the speaker connections and even tried the plug to headphones, but still no sound. The Device Manager shows all the problems and I do not receive the error messages. The ONLY change I made was... before upgrade, sound; After that, no noise.

  Hello Jgh54,

  Thank you for your message.  Let us make sure that your playback devices are enabled.
  Right click on the speaker on your taskbar icon > select "playback devices".
  In the empty space, right-click and select both "Show disconnected/Disabled Devices.
  You can see icons for your speakers and headphones now?  You may need to activate these two.
  You can also try the troubleshooter to find connection issues that may exist, the instructions are below:

  Click 'Start' > select 'control panel '.

  Type of troubleshooting in the top-right search field > select "troubleshooting."

  Click "Hardware and sound" > select "play Audio".

  Please let us know if it did or did not help to solve your problem.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• No sound after upgrade to Windows 7

  Hello

  My HP laptop now has no sound after window update.  Try to use troubleshooting, update driver sound, but still not work. Help, please!

  Laptop model

  HP Pavilion dv7-6178us notebook PC

  Window7 Home Premium 64-bit Service Pack 1 operating system

  Hi Nick,

  You are more than welcome

  All the best,

  DP - K

• In Asus F3JC no sound after upgrading to Windows 7 Professional 32 bit

  I have a problem when I installed a new copy of Windows 7 32 bit on my laptop Asus F3JC work sound didn t.

  And the only audio device that appears on the device management high definition Audio Device.

  I ve tried to install audio drivers Realtek for Windows 7, but I get an error message saying that there is no device that tose pilots may apply.

  You must set the compatibility in the properties to Vista service pack 3, you can run application properly.

• Cannot connect to Internet after upgrading to Windows 7 64-bit Aspire M5100

  I upgraded from Vista Home Premium 32-bit, Windows 7 Home Premium 64-bit. I have a Marvell yukon 88E8056 PCI-E Gigabit Ethernet Controller. I tried updating the driver, but it has yet to solve the problem. I am able to connect through a usb wireless adapter.

  I noticed someone had this problem with a M3100 and the solved the problem by replacing the Ethernet card. I hope that I don't have to do since I've upgraded to Windows 7 using an OEM version. As I understand it, you can change to any material after I installed the OEM version.

  When I ran the Windows 7 Upgrade Advisor there was compatibility issues: 1) the card Ethernet, 2) graphics card.

  He said go to the device manufacturer's website and download the latest version of the driver. I thought that's what I did, but it still doesn't work. I have all the 'exclamation points"in the Device Manager. Everything said that it works correctly.

  Maybe I'm not download the appropriate driver. Should I just go for the driver and the driver update rather than choose one myself and downloading?

  If I end up installing a new Ethernet card going to work?

  Any suggestions?

  Good. It's just to install and configure the new network card. If all goes well, assuming that Murphy does not, it should be easy sailing! Let me know how it goes.

• Audio Cup after upgrading to Windows 7 64 bit

  I recently updated a workstation reasonably powerful BOXX made from Windows XP to Windows 7 64 bit.  The only thing that does not seem to have gone well refers to audio.  Any application I play audio, it cuts out / falls for about one second every 3 to 10 seconds.  In Adobe first CC Pro and Adobe Audition CC, sounds cuts out.  When I play a video directly on YouTube, he stops and sometimes even lets out a nervous cry, so I don't think its a problem to Adobe.

  Workstation BOXX, with a NVIDIA Quadro K4200 graphics card.  Processors: Two X 5550 2.67 GHz; 12 GB OF RAM.

  Device Manager shows two audio devices / drivers: NVIDIA High Definition Audio; and a Realtek High Definition Audio.

  In case there was a conflict, but it makes no difference, I disabled the NVIDIA driver.  Always cut.

  Interest, sometimes when I have audio playback in Adobe Audition CC on the audio timeline, I can see the time meter stall periodically and restart, not necessarily in harmony with the cuts.  The end of a two-minute audio current reading, audio play is over, but the marker of time has not reached the end of the audio waveform display and moves again.

  None of the above happened before the upgrade to Windows 7.  Thanks for your suggestions, you can provide.

  This sounds like a driver issue, did you test if your hardware is compatible with Windows 64-bit?

  http://Windows.Microsoft.com/en-GB/Windows/Update-driver-hardware-ISN

• Reinstall Visio after upgrade to Windows 7 64 bit

  Hello everyone. I installed Windows 7-64 bit. My upgrade went without a hitch except to reinstall one of my Office programs. I am trying to reinstall Visio Professional 2003, however, my first legal installation disc is Visio 98. Windows 7-64 bit will not install this version, so I'm stuck without a track to upgrade in order to activate properly. How to work around this problem. I tried to join the team of Visio, but I see that they want to get my credit card on which I am not too happy to... Help... Please...

  Thank you.

  E-mail address is removed from the privacy *.

  I know it's late to this thread over 3 years, but I recently found this problem on the copy of my dad from win7 64.

  With success, I was able to install 4.5 Visio standard, Visio 5.0 update and upgrade Visio 2002.  Everything worked successfully on win7, but the older versions had some quirks to fix in the installation process for 2002 to see them on the hard drive and to recognize as valid evolutionary products.

  The main problem is that version visio 4.5 and 5.0 used an old 16-bit installshield Setup program.

  The applications themselves are 32-bit and will be running in compat for windows NT 4.0 mode in win7 64-bit.

  My solution was to get a program that will extract the old cab of installshield used on the cd files.

  The file to extract cd is called 'data.z' and you must check out it in a good location on your hard drive.

  I used the program Universal Extractor from the following site:

  http://legroom.NET/software/UniExtract

  the extraction method used was i3comp.

  Once the records from HD, I created a shortcut to the executable visio in the extracted folder, in the properties of the shortcut I went to the compatibility options and click on it to change the settings for all users.  Here, I did the program running under Windows NT 4.0 and run as administrator.

  I then tested successfully the Visio 4.5 and 5.0 with this method to ensure that any registry or ini file stuff needed by the installer of 2002 would be easier.

  After I checked they were running and working on win7 64, I put in the 2002 Update CD recently bought new by the amazon seller.

  Setup has found the copy to hard disk, and I told it to install over Visio 5.0 on hard disk folder.

  When I launched visio 2002, he asked to activate, I then just let my dad continue the activation process of Visio 2002 update because it was actually him who had bought and she belonged and was installed on his computer.

  He had worked for a couple of hours and finally had put on his machine virtual windows xp win7, but wanted on his real win7 64 bit installation.

  I had the chance to help her for about an hour, and it was enough time to understand the problem and get Visio 2002 working for him.

  I note that there is a point in the installation process when upgrade version wants to find the old copy to upgrade, he will try to get the hard disk and you will almost seem to be frozen, but the style hourglass turns the pointer of the mouse circle will be always moving.  As long as you wait outside it will be eventually find the older version installed.

  Finally, on my father's computer, there are more than 1 million files from different programs and documents to go, after about 5-6 minutes setup are the old copy and continued.

  After it's done only internet activation is required.

  Hope this helps someone.

• Runes of Magic will not play after upgrade to Windows 7 64-bit

  Have upgraded to window7 64 bit that I use now the 8 GB of ram

  Runes of Magic was playing on my old windows version but usually install a new

  Get message that windows could not find a version of the game, so I downloaded the patches for the game manually

  Game Launcher now returns but crashes after I selected the game

  Any help would be greatly appreciated

  Thank you

  Hello

  1. have you made changes on the computer before this problem?
  2. What is the full error message or error code?

  I suggest to perform a clean boot, and then try to download and install the game and check if it helps.

  Clean boot will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135

  Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Note: Runes of Magic is compatible with Windows 7 64 bit

  Reference:
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=runes%20Of%20Magic%20&OS=64-bit

  Note: If you still have the problem then I suggest you to contact the game manufacturer.

• Portege M700 falls down after upgrading to Windows 7 32 bit

  Dear all,

  My portege M700 laptop played most of the reliable time.
  However, it was taken very slow sleep after a few iterations of sleep-wake, taking > 5 min.

  I have now installed Windows 7 32-bit, which works very well. Has no problem with the release of sleep. However, on 1-2 times per day now, I get a message that Explorer crashed and must restart. About once a week, the system crashes completely with a blue screen of windows (without core). Most of the time, in seconds to the time that the screen freezes, I hear the fan switch on at full speed (much faster that it never runs normally) and the case becomes hot enough.

  I installed the latest drivers for 32 bit Windows 7 on the site of Toshiba UK.

  Can someone help me to diagnose the cause of these accidents?

  Thank you very much

  Chris.

  Hello

  It is difficult to say what might cause this behavior strange system.
  But you said something about the hot deal and fans begins to spin faster

  It seems that the internal temperature of laptops increases to a higher level.
  A higher temperature may affect the RAM modules and this could be the reason why the system hangs and does not answer.

  What to say that you should check the Win 7 power management settings.
  There are many options that could decrease the performance of the processor and increase the cooling.
  In addition, you should check if the cooling fans are free of dust obstructed fans might not run properly and this would increase the temperature as well.

  Hope this helps you

• Blu Ray does not work after upgrade to Windows 7 64-bit

  Hope someone can help with this problem. I found a lot of forum and users with similar problems but I can't solve this problem.

  I bought this HP Pavilion DV7-1055EA about 3 years ago the drive blu - ray one of the points of sale, it was loaded with Vista 32 bit. After making this computer has 4 GB of RAM instead of 3, I did a clean install of windows 7 64-bit. After which my Blu Ray player stopped working.

  When inserting a CD/DVD, the drive works fine and everything is as usual, however when insert a Blu Ray disc windows does not recognize the drive IE "drive is empty".

  Different things, I tried to set the inclusion of the problem, reflashing the BIOS, install the latest firmware, re - install the game media, installed PowerDVD but without any change in the symptoms.

  Can someone help with this problem? Well, I'm stuck on this one like blu ray readers are not my strong point in computers. Maybe HP (in their wisdom) printed a digital brand on the device which prevents him from being compatible with more recent versions of windows? I talked to HP however my warranty has expired I do not pay £15 for a fool to tell me to come back for win vista (which is the worst OS known to man kind) or that there is no solution available. Help, please?

  Hello

  After writing this last post, so I decided to download Nero Info Tool to look at information from drive etc.

  The program asked if I could put in a disc to test the speed of running, so I thought... what the hell I'll put in a blu - ray disc and see what happens.

  Next thing I know that running speed test took place then everything suddenly the blu ray kicks in life and he was here... smooth as the more calm waters, known for the kind of man... my blu ray film.

  Reboot the machine and now the blu - ray player works fine. Any idea on what just happened?

• Pilot missing after upgrade to Windows 7 64-bit on dell xps 1340

  Installed Windows 7 64-bit on Dell XPS 1340. Most of the drivers/hardware work. A system of still unidentified Base and Windows update device / driver downloads dell cannot fix.
  State of the device - drivers are not installed (code 28)

  name of the physical device object - NTPNP_PCI0024 to bus PCI 1, device 7, function 3

  Hardware PCI/VEN_1180 & DEV_0592 & SUBSYS_02711028 & REV_12 ID
  etc.

  Help, please. Thank you

  Hello
  Here is the site of Dell support for your model. You will find all the drivers for Windows7 64 bit.

  Hardware PCI/VEN_1180 & DEV_0592 & SUBSYS_02711028 & REV_12 ID
  It is the Ricoh card reader .

  Driver so that it is on your article of chipset support site.

  If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

  If your issue is resolved, please indicate then your wire is with solution.

• Satellite Pro A10: No sound after upgrade to Windows XP Home SP2

  Hello

  Just use the recovery disks on my Satellite Pro A10, no problem with the sound, and then upgraded to XP Home with SP2, no noise.

  What I've read elsewhere, this is a problem and there seems to be an answer. I spent hours looking for drivers updated without success.

  I have also contacted Toshiba support, after blow and blow that they reported the following driver, 5.12.01.3542, which is the same one that I have already installed and does not work.

  Certainly there must be something out there that works.

  Ant.

  Install the driver of his most recent available FRO this sound chip and perform all the Windows updates available on the Microsoft page!

  Update just the BONES together!
  http://www.update.Microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us

  Notes; You may have to restart the laptop and need to connect to this site several times to get all available patches.

• No sound after upgrade to windows hdx9320ea 7

  After windows 7 upgraded my quick launch keys work not properly.main problem is that I have no sound.is there a way to solve this problem.

  I guess you mean the softpaq QL and not the BIOS, they have not released win 7 drivers specific to your model, so you can have some problems... Always make sure you have the latest version of the BIOS and applcations try their running in compatibility mode, if you have any questions http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows