LEXBCE went out of the CPP and the print spooler

Similar Questions

• How can I get the print spooler to start when the file is missing: lexbces.exe? where can I download this file?

  I TRIED TO RE-INSTALL MY HP WIRELESS PRINTER AND IT WOULD NOT INSTALL. I HAVE RECEIVED AN ERROR MESSAGE THAT THE PRINT SPOOLER WAS NOT WORKING AND STOPPED. I have TRIED TO START THE PRINT SPOOLER AND FOUND what IT MISSING THE lexbces.exe FILE. I THINK THAT WHEN I UNINSTALLED THE HP PRINTER, HE WALKED OUT OF THIS FILE. IT IS IN THE SYSTEM 32 AND A FILE OF REMOTE PROCEDURE CALL. DOWNLOAD THIS FILE OR DO I HAVE TO RE-INSTALL WINDOWS XP?

  Lexbces.exe is from Lexmark (or Dell-badged Lexmark) printer install.  When the Lexmark printers are installed, they configure the print spooler to depend on Lexbces.  Unfortunately, when you uninstall the software Lexmark, the uninstall program removes the file but does not have the print spooler dependency.

  Open a command prompt window (start > run > cmd > OK)
  Type the following line in the black command prompt window and press enter

  dependent on the spooler of sc config = RPCSS

  Note that there is no space before the = but there is a space after it.

  Restart the computer.

  See the instructions on One Article to do a clean installation of your printer.

  After the restart, you can check that the print spooler has started in several ways.  One way is:

  Open a command prompt window and type the following command, and then press ENTER:

  spooler request SC

  You should see the following in the command prompt window:

  spooler request SC

  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STATE: 4 RUNNING
  (STOPPABLE, NOT_PAUSABLE, ACCEPTS_SHUTDOWN)
  WIN32_EXIT_CODE: 0 (0X0)
  SERVICE_EXIT_CODE: 0 (0X0)
  CHECKPOINT: 0X0
  WAIT_HINT: 0X0

• The print spooler stops and I'm unable to start

  I have a HP Officejet Pro L7680 all-in-one that has stopped printing because of the stopped print spooler.  The printer is connected to a local network.  My OS is Windows 7.  I tried Wizard solutions HP that does not help or give answers.  All I get is error 1053 has failed at the beginning or demand for appropriate ion Conytol.  What should I do to start the print spooler?

  To start the spooler go to the start menu and select Control Panel then Tools administration and select Services, and then scroll until you see print spooler. If the spooler is running, then select Restart the service, and then try to print a document.

  Let me know how it goes.

• Removed from Garmin using MSconfig and now I can't print. The print spooler is not running

  I wanted to speed up my computer and remove an item off my msconfig.  Now I can't print. missing spooler.  What should I do?  I tried dating back to some time earlier, but all previous changes are missing

  Operation could not be performed.  The print spooler is not running

  the question I wanted to delete was for Garmin

  don101947

  Hello

  I don't know if you have already solved the problem of the other answer, but here's something you can try if your not confident using the command line.

  Go to [start],-> [Control Panel]-> [administrative tools]-> [Services]

  Depending on if your running XP, Vista or 7 you can have 2 tabs at the bottom of the window you see.

  Select [Standard] if its not already selected. If you already have a large list, skip this step.

  Scroll down and find the print spooler. Double click it, and then set the "Startup type" to [Auto]

  then click [OK] and then make a right click again print spooler and select [start]

• The print spooler has a problem and closes its doors.

  The print spooler has a problem and closes its doors. This often happens when I'm trying to print something with multiple copies. Any program that I use either Wordperfect or editor he has a problem. It helps that I could restart the computer and it clear, but not even this works now.

  Try to uninstall and reinstall the printers.  Update the drivers for the printers you use.  Try to have both installed printer and see if you can isolate / how printer driver may be involved in the issue.

  Another option to consider is to...

  (Post by marc_lebowski)

  Clear printer spooler files and restart the Spooler Service

  =================================

  1. click on start, type "Services.msc" (without the quotes) in the search box and press ENTER.

  2. double-click on "Printer Spooler" in the Services list.

  3. click on stop, and then click OK.

  4. click on start, type "% WINDIR%\system32\spool\printers" in the search box and press ENTER, remove all files in this folder.

  5. click on start, type "Services.msc" (without the quotes) in the search box and press ENTER.

  6 double click on "Printer Spooler" in the Services list.

  7. click on start. In the Startup Type list, make sure that "Automatic" is selected and click OK.

  See if the problem persists.

• Are not in the print spooler service and must not be restarted in Windows Vista

  I can't add an impression because I get an error message "unable to open the Add Printer window. The local print spooler does not work. Please restart the spooler or restart the machine. »

  I ran the "fix it" program, but it does not solve the problem.

  Restarting the computer does not solve the problem. Go to management services does not solve the problem, because the print spooler is not automatically listed to run.

  I was able to print on a staff of 600 Epson printer connect to my Dell computer via USB.

  The next option to solve this problem, what am I looking at? Help, please.

  Thank you.

  Hello

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Printer not print indicating the print spooler is stopped and does not restart

  Original title: printer does not print

  The print spooler is stopped and does not restart. I have a laptop with Windows 7 and the printer is a HP Officejet 8600 (network). My wife has the same laptop model and has no problem with printing. Any help you can give would be welcome.

  David Torres

  Hi David,

  Thanks for posting your question in the Microsoft Community.

  I understand that this printer not print indicating the print spooler is stopped and does not restart. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  . Have you made any recent hardware or software changes to your computer before the show?

  Please follow the methods and mark the question below:

  Method 1:

  Step 1:

  Run the Microsoft Fix It from the link below.

  Diagnose and automatically fix problems printing and printer:

  http://support.Microsoft.com/mats/printing_problems/

  Step 2:

  Follow the steps in the link below.

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  You need to check if the Printer Spooler service is started from services.msc.

  a. click Start, click run, type services.msc.
  b. double-click the print spooler and verify that the status is set as Automatic or Manual.

  c. right-click on print spooler and click restart.

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

  I followed method 2 above. When I Rt click Spooler printer restart remained gray when I click on START, I get the message "Windows failed to start the service on local computer print spooler.   ERROR 1053 the service did not demand launch or timely control.
  What can I please?

• Have a new Dell, the print spooler must be started manually, and after you close the properties of the printer etc.

  Problems with the print spooler, is not serious what printer etc. have removed all and re-installed... the spooler, must be started manually everytime... after I restart the service., he works for a few minutes and stops at OFF, normally 3 or click during the verification of the properties of the printer etc... Help please!

  Jimmyp5,

  Print jobs stuck in the queue can cause problems. Try to run the remove print jobs , and then restart your computer.

  So try these settings...

  Start, Control Panel, Manager of devices.

  Go to the section USB controller, and then click the plus sign +.

  Go to each USB hub root and right-click on it, on the left, click Properties, on the left, click power management. Uncheck the allow the computer to turn off this device to save power.

  Restart your computer.

  --------------------------------------

  Start, Control Panel, Manager of devices. Click Network and then right click on your wireless network adapter, on the left, click on properties, power management. Uncheck the allow the computer to turn off this device to save power.

  Rick

• Update of Acrobat Pro XI crashed the program and the print spooler

  I have a brand new 10 windows computer and had installed Acrobat Pro XI which worked great until the latest update has been released. My computer tried to auto install the update and the update failed. Immediately when it failed, it crashed my spooler to print and all my printers disappeared; I was unable to reconnect to them without having to restart the computer.

  The Acrobat site suggested that if the update was unsuccessful and failed, I should uninstall Acrobat Pro and reinstall it. Well, I tried that and the problem cascaded gets worse. Acrobat does not provide ANY technical assistance with this kind of thing except through public forums.

  When I tried to uninstall Acrobat Pro, as the site of Acrobat has suggested, I ran into the problem with the print spooler again; He could not reset and start. For example, Acrobat Pro can / can not be uninstalled. I tried to 'fix' the installation without success. And when I tried to reinstall the program, it could not properly reinstall because I had to install the 'Adobe Application Manager' that does not install with the following message: "Installer failed to initialize. " Please download Adobe Support Advisor to detect the problem"and has provided a link. Of course, when you click on the link, you get another message, "that The Adobe Support Advisor has been abandoned" direct me to the forums that provide absolutely NO support for that either.

  At this point, I lost my * expensive * Adobe Acrobat Pro XI product, with no way to reinstall and no help to fix this Adobe created. In addition, I now have another serious problem with the print spooler.

  If * person * helpful suggestions, please send them my way. I'm ready to throw Acrobat altogether and never use one of their products that has been such a mess to deal with.

  Hi rickj90358804,

  If you try to install Acrobat XI via Adobe Application Manager, I suggest to download an installer manually using this link: download Pro or Standard versions of Acrobat DC, XI or X and try to install again.

  In addition, you can contact the support as kglad mentioned above.

  Kind regards

  Tariq Dar.

• Acrobat downloads and passes by the installation process but the stalls at the end sentence "the print spooler could not start" someone told all solutions?

  Acrobat downloads and seems to go through the installation process but the stalls at the end by saying that "the print spooler could not start".

  All this experience and give me advice?

  Hi johnt46100749,

  Please try the solution mentioned in this KB doc https://helpx.adobe.com/creative-suite/kb/error-1920-service-print-spooler.html .

  Kind regards

  Nicos

• How to fix: Error 1053 of the print spooler

  Are you an error when you try to restart the print spooler?  Do you have your printer spooler error and now, do not restart?

  You saw "error 1053: the service did not demand launch or control in a timely.?

  There is a page of Microsoft support with information about this error, which can be found here.

  According to Microsoft:

  • Question: The ServiceBase class calls the OnStop method directly from the Service command handler that is defined in the ScDispatcherLoop of the Advapi32.dll file. After 30 seconds, if the ScDispatcherLoop thread is not ready to receive a new order of service from service control manager, Windows brand services controller out service as 'time '. Therefore, you receive this error message.
  • Resolution: to resolve this problem, obtain the latest service pack for Microsoft .NET Framework.

  This resolution works for some, and allows the service to return to the correct functionality.  However, I want to provide workaround incase this option does not work for some.

  • Open the run command by selecting it from the start menu or by pressing the Windows key (to the left of the alt) + R
  • Type services.msc and press enter
  • Scroll down and double click on print spooler
  • Select the tab log
  • Uncheck the Allow service to interact with desktop
  • Click apply
  • Select the general tab for the print spooler, and then select start

  I have the confirmation that this workaround works for some users.  The link below will take you to a thread where this information has resolved this error a user in these forums:

  1053 error print spooler does not start thread

  Here is the video where the workaround steps, listed above, were found.  The video also gives a graphical representation of these steps for those who prefer the Visual instructions.

  I hope this helps users with error 1053 of print spooler.

• How to restore the print spooler in the printers/faxes folder in Control Panel

  Recently discovered, I can't print because all the information of the printer in my printers and Faxes folder in Control Panel had disappeared.  When I clicked on "Add a printer" it is said "operation could not be performed.  The print spooler service is not running.

  When I tried different ways to study or to restore service, it does not appear that the print spooler service is here, so that no printer can be installed.

  I would like to know how to fix this problem and get the returned printers in service again.

  Help, please!

  Yes, I tried your suggestions.  It was useful, but it didn't completely solve my problem.  The spooler was still missing.

  I think that there is something different going on inside the machine, because other funny things started to happen, alarmed me thinking that there is some hidden virus eating away at the system code!

  I ran MS security scan several times and also McAfee Security Suite.  Security under the full Scan scan found a virus, but it doesn't seem to be the problem after I got Safetly purged, Scan it.  McAfee came up with nothing.

  So, the way I finally solved it my problem was to do a full restore from backup, and if the operating system was restored.  In this way, I know that the functions of the printer will be restored, who he was.

  Sorry did not had time to review all the details that you suggest, but I was running out of time to try too much, so the "faster" was a system restore as the surest way to get rid of all the problems and restore to the original code.

  Thank you, you have been very helpful.

• The print spooler service is not running

  I had a virus that I got rid of but now my printer does not print, it comes up with "the print spooler service is not running" and I can't add a printer.  What should I do to solve this problem.

  It's pretty easy to start the print spooler service... but may not stay started.

  To restart the print spooler:

  • Click Start, click Run, and then type services.msc in the run box, and then click OK
  • Scroll down the list until you get to the print spooler and double-click the entry
  • Make sure that the "Startup Type" is "automatic".
  • Click on the button 'Start '.
  • OK your way out

  In the likely case where this isn't a solution permanent for you, when you post, include the following information:

  1. What version of Windows you have, including the service pack (start > run > winver > OK)
  2. What make and model of printer you have
  3. What antivirus you have installed
  4. If your computer was without an antivirus application or current subscription for your antivirus (in other words, how is it you got infected in the first place)
  5. What steps you have taken to determine that your system is now free of malware (i.e. what applications antivirus and antimalware you scanned the system with)

• The Print Spool Service does not work

  I use Windows XP and have 2 printers installed.  I had no problems until recently, when I try to print I get an error message that I need to install a printer.  When I went to control panel to check the status of my printers don't have no installed printer.  When I clicked on the "Add a printer" icon, I received a message that the "Service of Spool of printing does not work.".  I can't find anywhere in the menu helps an answer to this problem.  Any help would be greatly appreciated.  I must mention that I restore the computer to an earlier time and he has not made a difference.

  To activate the Print Spool Service, follow these steps:

  1. click on the Start Menu, click Run, type "services.msc" and press ENTER.

  2. in the Services pane, click on "Alert" and scroll down until you see "print spooler".

  3. click on "Start service" or "Restart Service", as the case may be.

  The print spooler service should now be enabled.

  Check if the printing problem is resolved.

  Hope this helps

  Post back if necessary

  ____________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The installation of my recently acquired HP J3680 failed due to lack or the 'print spool.

  Original title: EU tive an instalacao da HP j3680 interrompida por falta "of printing spool" Como procedo?

  The installation of my recently acquired HP J3680 failed due to lack or the 'print spool.

  What can I do?  You have a possible solution?

  Thank you

  Fernando

  Hello

   
   
  What is the exact error message that you receive?
   
   
  I suggest you read the steps from the article below and check if it helps.
   
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
   
   
  If you want to support in your language, then I suggest you check out the link below.
   
  
  http://support.Microsoft.com/common/international.aspx