No sound docking station line out

Similar Questions

• Qosmio X 770 - 11 c - how to disable on board the speakers when you use Line Out?

  Hello

  Is it possible to disable on board to intervene when the output line is used.

  Currently, if I plug in a cable to the socket of hadphone and choose alignment on the realtek Control Panel, sound is output line out as expected, but also through the internal speakers.

  Is it possible to stop this and don't have sound out through the output line?

  Thank you

  Graeme

  If you want to hear his helmet only you should choose option helmet.
  Disconnect the cable and reconnect it. When you see the small window on the screen where you can choose between the headphones and output line options choose headphones and you'll hear on external display only.

  In case you have disabled this pop-up dialog box you can activate it manually. Open the Realtek Manager connect the external device and when you see active point black on the right side make double click here and change the settings.

• Problem Audio Line Out HP Docking Station A7E36AA #ABB

  Hello

  I have the Elitebook 8570p (Win7 Pro x 64) and the Docking Station A7E36AA # ABB

  I plugged my speakers with audio line out of the docking station, but the sounds of music 'flat', without no bass.

  I tried the same speakers with the line out of the elitebook directly and it works.

  I thought that the reason for this is the docking station.

  Yesterday I got from the docking i11X REPLACEMENT, plugged my speakers with its audio line out and got the same failure: his flat without bass.

  Same again: directly after my elitebook, all works.

  I reinstalled the audio driver from the hp supportpage

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5217791 & SP...

  but nothing changes.

  What else can be often cause this problem?

  I hope that there is an adequate solution.

  Best regards

  123halllo

  Caramel

  Thank you for your response.

  Your link refers to the same version of driver as my link (6.10.6435.0; 5.10.6435.0)

  But there is a statement:

  1. download and install the following SoftPaq:

  SoftPaq description

• Line out Dock to USB Mac connection

  I have a dock station to connect my iPhone 4s, what happens if I connect a cable (used to charge an iPod shuffle) to a USB port in my Macbook Pro and across (male 3.5 mm connector) cable at the entrance to the dock line?

  taking female mini-jack 3.5 mm of dock is out is not the entrance

• No sound from HP - 8560p, windows 7 64 bit elitebook docking station

  I was issued a laptop Elitebook 8560p for use with a 90 W HP Docking station at work.  When the laptop is plugged into the docking station, the port ' audio out ' of the docking station does not work.  The sound continues to come out of the computer laptop speakers, or, if I plug the headphones into the headphone for laptop, it comes out of the helmet.  Plug the headphones into the Docking Station does not all the sounds (either of the two audio ports - in or out).  When the laptop is plugged into the docking station, no additional reading device does appear in the audio menu - just an output HDMI AMD (disabled) and speakers (activated).

  The speakers/headphones on the laptop works fine, the problem is just that the docking station is in no way "replica" or the audio output support and it's as if the port of the enclosure of the dock just weren't there.  So, I could use my headset by plugging directly to the laptop, but this really seems to defeat the whole concept of a docking station.  All other ports (video, usb) seem to work on the docking station.

  I am running Windows 7, 64-bit.

  I reinstalled the sound driver (for laptop) so that the laptop was plugged into the dock.  That did the trick.

• X 200, no sound on docking station on Windows7

  Hi, using windows 7 my sound output to the docking station does not work anymore. When I plug a speaker for her, it mutes the internal speaker of my X 200, but there is no sound coming out of speakers, and windows does not recognize that I plugged into a speaker. When I plug directly into a speaker to the audio jack on the laptop, however, it works and windows acknowledges also that I plugged it.

  everyone knows the same problem?

  
  

• Tecra M11-15 x in the docking station - No sound

  Hi all

  We use the laptop mentioned above.
  Unfortunately, none of us has sound when the laptop is docked to the station.
  The station sound works.

  Anyone have an idea where the problem would be?

  Funny thing is that during the startup of windows start meldody is available.
  After the start is finished, no other sound.

  Our system
  Prof. of Windows 7 x 64.

  Thanks in advance
  Thomas

  Post edited by: thomaso

  What docking station do you use?
  Did you check if mute is not activated?
  Have you tried an update of the audio driver?

• can I connect a 5s to a docking station with a Flash 30 adapter to play music with a sound system

  How to connect an iphone 5 s to a docking station that is connected to a sound system to listen to music. Tried with a lightning 30-pin adapter. Sound does not play through the speakers. This method works with my new ipod, but not with the phone.

  Duh. It was too complex. Docking station disconnected and plugged the cord on the plug headphones. Problem solved. But still think that the card should work.

• No sound on speakers HD docking station for the xoom?

  I have questions get all the sounds from my motorola docking station speaker. He's running ok, but the sound does not work... any advice/suggestions?

  Before you ask...

  Yes, it's the speaker dock (not the standard dock) and I turned the volume AND rebooted... anything else?

  Just had a eureka moment... If the HDMI cable is connected to the back of the dock while the sound will not go through the dock speakers. I guess that makes sense, but he had deceived me! The trials and tribulations of being an early adopt!

• Docking Station Sound quality?

  I use an Elitebook mobile 8470p with an A7E32AA (90w 2012) docking station. If I plug in my Logitech Z313 2.1 speakers in portable headphones Jack the sound quality is as expected. If I plug the speakers on the decision-making of the docking station, the subwoofer produces no sound. The situation is the same with another set of 2.1 speakers (Logitech X 230). With an older docking station and a laptop, both sets of speakers perform as expected when you use the docking station. If anyone else has experienced this? Is there a cure?

  If you run the SRS Premium Sound PRO software open - Panel, hardware and sound. Go to the experience of listening and clear Audio enhancement. For some reason any Audio enhancement is not improve anything.

• sound on laptop lost when it is connected to the docking station

  laptop connected to the docking station and audio comes through the audio connection [headphones] on docking station.  No sound on computer

  Hello

  ·         If it works well before? If so, remember to do recent changes on the computer before this problem?

  When you connect the laptop to the docking station, the default audio output device will automatically change to the docking station. Similarly, in the case of plug in the headphones on laptop. I suggest you to check if the audio device by default from computer speakers is properly defined. Follow these steps:

  a. click the Start button, select Control Panel, click hardware and soundand then click sound.

  b. click the read tab make sure that the correct default audio device is selected. (For most users, the default audio device is pregnant.)

  c. If your default device is not set to the right audio device, on the read tab, select the appropriate device, click Properties, click the Advanced tab and make sure that the default Format is set to the value you expect. When you are finished, click OK.

  d. on the read tab, select the playback device, click set upand make sure that the configurations are set correctly.

  If the sound settings are set correctly and that your speakers are already set as default device, go to "Check if an audio driver is installed" now.

  e. Select the audio device you want as audio device by default, and then click set as default.

  f. click OK to save your settings.

  For your reference, follow the steps described in the following link:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• Windows 7, Dell Docking Station, cannot get sound through speakers (portable speakers work very well)

  Dell Latittude D630
  Replicator docking station
  Creative Labs speakers - no drivers are provided
  When I play the audio, it comes through the speakers of the laptop, even when the laptop is closed and in the docking station
  Unplugged and reconnected and has held over my head like an etch-a - sketch--> nothing solved the problem

  Hello Rzman,

  Welcome to the Microsoft Answers Forum!

  As you can hear clearly through the laptop. It seems that the connection on the speakers are not appropriate. Make sure all agreements fully connected without any loose connections.

  It could be a problem with the docking station. Try to connect the speakers directly to the laptop without using the docking station and check if it works very well.

  If the problem persists, then I suggest you to check with the speakers. You can also contact the manufacturer of your docking station or with dell and check with them if this is of any help

  Please get back to us if you have any other questions.

  Thanks and greetings
  Mir - Microsoft Support                                                           
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads

• No bass when you use the docking station to not probe

  When I use the out port of my docking station (Series edited by moderator) I get no bass sound, just hail my wide range speaker. When the speakers are plugged into the headphone jack directly on the laptop it normal sound, with a full range of sounds. I checked the setting in the CP of its speakers are identified as the range, so this isn't the issue. There is no sound improvement enabled in Control Panel SRS. I'm puzzled. Why no bass when you use the docking station only. I tried two different docking stations with the same result: no bass.

  

  Yes! I finally solved it on my system:

  • Go to the control panel
  • Choose the material and audio

  or simply to display all Control Panel items

  • Select SRS Premium Sound Pro (it's an icon of circle blue/white)
  • Wait for the program to come black EQ
  • Select the tab/words "listening experience" near the top of the window of SRS Premium Sound PRO
  • Uncheck the 'improvement of Audio '.

  Fact

  In addition, there is the graphic equalizer in there that totally works well to further fine tune your desired speaker and the audio preference.

  

• The docking station uses Henge drivers?

  Is the Henge dock just a cable Organizer? -Seems all that is material.

  Or I need specific SOFTWARE drivers so that my Henge Dock to exploit 100% as expected?

  I use the Version B Henge Dock for my MacBook Pro 17-inch - and it all works when it is plugged.

  I just want to know if I'm missing out on something?

  THX

  Henge Docks are just a docking station, no software required, and any other features. Make sure to work your hard MBP while closed but, I think that life has been shortened on my Macbook, because it has been used mainly in the dock and couldn't cool properly with the lid closed all the time. The logic board failure.

• Compatibility issue with the Portege 7020 / display CT 7200 & docking station

  Hi guys,.

  I have some problems with 2 cell phones.

  1 is:
  I bought a 7020 used to replace the broken of 7200 screen. After having disassembled the screen, I noticed that the connectors have the same number of threads, but one of the terminal of the 7200's screen has more. 'no problem' I thought, and with patience I picked up the cable of the adapter of 7020 one put in the 7200.
  But when I turned it on I saw only the colored lines and squares: S: S
  If you want I can provide with the NP, if it would help... Even if I check the compatibility before ordering.

  2nd problem:
  Portege 7200 correctly recognize the docking station, while a few beeps before starting the 7020, and obviously it does not work with him. I checked on the toshiba site and the dock would be totally compatible!

  And for the end... Where can I find the bios updates?

  Sorry for my bad English, I hope someone could help me!

  Kind regards
  Francesco

  Hello Francesco

  You'll be really lucky if someone here can help you with these old models of laptops. I'm sure they have about 10 years.
  No manual maintenance and sufficient knowledge is not easy to help you with this replacement of the screen.

  This problem with docking station may be related to defective hardware. The two laptops are so similar, and two of them can be used with this docking station. How you can be sure that equipment is high on 7020?

  The BIOS updates are available on http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp, but as I can see for Portege 7000 there is no updated BIOS, just to 7020.

  If you wish, you can contact the nearest Toshiba service provider. they have manuals for maintenance for this old notebooks and allow you to provide accurate information on the parts you need.