No sound on LG display via USB - C

Similar Questions

• Speakers for iMac via USB Dongle

  So, I bought a USB 3.5 mm dongle so that I could connect the external Boston CR6 speakers to my iMac. I get sound but it is pretty low. The volume level is the same if I plug the 3.5 mm plug into the hole in the back of the iMac.

  I think it is a difference of impedance, or the iMac does not have enough juice to power the speakers (which are actually very small).

  Is there anyone driving experience of the external speakers, via USB or directly via the 3.5 mm to 3.5 mm port? I will order a small amp if that's the problem?

  Maybe audio HDMI or optical has more power? I don't see a spec (which I understand).

  10.11.6 running.

  Thank you.

  FWIW, most if not all sound cards were never intended to push the non-powered speakers. That's why most of the 'computer' speakers are powered. You will need amplification of some sort.

• DCR-TRV260 NTSC via USB for Windows XP Home edition home

  Hello!

  I'm trying to help a friend to connect its DCR-TRV260 NTSC to his computer HP Vectra VL420 (Yes, a very old machine).
  The computer is HP P/n: PS660AV #246, with a processor Pentium 4 (Willamette) of 478mPGA socket @1. 70 GHz, installed on a HP
  card system with an Intel i845 NB A05 and and Intel 82801 SB, the latter is, I suspect, the culprit.
  We lack a clean new install of Windows XP Edition family with Service Pack 3, with 384 MB of PC133 SDRAM.
  I know it's something Museum but hey, it works and it can not even buy a more recent machine.

  The problem: I can't do the camera be considered a via USB removable storage device, in order to download still images on the computer, he recorded on tape, not a stick of memory, there no card IEEE1394 and no budget to buy a.
  I installed the software included in his CD that comes with the camera, and I can work
  streaming USB tool and watch motion pictures and still images through it, but I can not D/L to the computer.
  I removed all the foregoing, as well as all instances of the camera Device Manager, then set up PMB56_installer1108a, to my dismay, because he wants to only use IEEE1394 (I understand why, but it should offer the USB option).

  How we manage to always download these images, recorded on tape, on his computer?
  I suspect the Intel 82801 SB is at fault, because even if it does not detect the camera and every time I plug it, Device Manager
  updated to reflect the three instances related to the camera, the Sony imaging device, digital video USB Composite and Audio USB
  Device, it cannot be seen as a removable storage device.

  Of course, I read the manual for the camera and the computer application s/w, but I can't find anything related, none of the people
  two elements indicate how do what my friend waiting!

  I read all the messages mentioning USB as a search term, and the question is: is WXP just incapable of such a feat?

  Help, please.

  Hello!
  After all this time, I discovered the answer to watch me on page 25 of the PDF manual camera operations.
  They are not always photos within the meaning of the word "cybershot", they are
  still images recorded with sound, then it's just a frozen video image recording with
  seven seconds of audio.

  Now we have captured it with Windows Movie Maker and export it somehow to jpg still images.

  Thanks anyway!
  (Someone has already read the post?)

• Impossible to print via USB using my iMac running 10.6.8 Officejet 4635

  I bought this printer all in one HP Officejet 4635 yesterday and are unable to print via USB.  I have an iMac running OS 10.6.8.  Until I'veI tried all of the suggestions that I could find on these forums (ex: downloaded the latest driver, disconnect/reconnect the power to disconnect/reconnect usb, delete and 'Add PRINTER' again, etc...) The computer does not recognize the printer, but displays "Unable to send print data" after I click on print.  I know that the printer works very well because I was able to send the document directly to his personal email address.   Help, please!

  Hello! Welcome to the @DanLA forums

  I have seen your post about how you can't use your Officejet 4635 with your iMac running 10.6.8. I understand that you have already tried troubleshooting, so please ignore all the steps that you have already tried in the list of my own suggestions below. If you still can not connect then, think of give us a call. I'll leave the details below.

  1. Mac OS X: how to reset the printing system
  2. Repair disk permissions
  3. Restart your Mac
  4. Reinstall the complete driver: 4630 Officejet HP e-All-in-One Printer full feature software and drivers series
  5. Try another USB cable
  6. Look for an update of the Firmware: get the latest Firmware and updates
  7. Make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on and can help.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Good luck!

• D1370 "Scan type not the Remote Scan value... "Why this error when connected via USB

  Printer D1370 MF w / usb on win7 x 64 machine connection.

  I understand that when networked, I owe to the printer and manually press , then then before you scan using the software MF Toolbox on my PC and then must go to the printer once the scan is complete and cancel this setting manually before I can print or use other functions. What is total pain BTW...

  However, I also have a MF6530 and can scan directly from MF Toolbox without manually change the setting of the printer when connected via USB.

  So, I would like to connect one of my PC via USB for scanning to eliminate the requirement to manually configure the printer for the mode. But, when I do this I always get the error "type of analysis is not defined for [Remote scanner] on the device" even though I am connected via usb.

  1. I do something wrong when I try to scan via a usb connection that causes the error "remote scanner?

  2. that this has something to do with D1370 being a network printer. My MF6530 isn't a network printer.

  3 is there a manual for the software MF Toolbox? The manual on the installation disc is for 'Send email' and 'Store to Shared Folder. The manuals provided in the box do not address MF Toolbox. There must be a detailed operating manual provided by Canon for this program?

  4. What is the error Code 162,0,0?

  5. where is the complete list of the error codes for MF Toolbox.

  6 help!

  Hi monza.

  I know that this issue is frustrating and I'll be happy to help you.

  The new imageCLASS machines are designed so that you can select an option to scan the machine.  There is no way to set a default scan on this computer option.  You will need to select [Remote scanner] or [computer].  This is to ensure that your device correctly handles the scan project.  For this reason, the ability to program a specific mode is not available.

  Although an extra step to make, an advantage to choose the mode desired for a respective scanning can ensure that poor communication of scanner does not occur if it was programmed to a different mode.

  The 162,0,0, the error indicates the Toolbox does not detect the scanner mode "Remote Scanner.  Scanning is not supported with a connection on the USB hub, as the hubs can cause communication problems, trying to transmit data to the computer.  We recommend a direct connect between the printer and the computer.  Once you have connected the printer directly, perform the following steps and check if you receive the same error 162,0,0:

  1. Check that the MF Toolbox is closed on the computer and press the [SCAN] button on the printer.
  2. Select [Remote scanner], then press [OK].  The display reads, "remote scanner. Waiting in line... ».
  3. On the computer, open the MF Toolbox and select [PDF].
  4. Click the [START] button green on the window [PDF].  The machine begins to deal with the scan.

  Then I recommend to download and install the e-manual for the device to your computer.  It gives very detailed instructions on each of the functions of the machine.  The e-manual should be included in the manual on CD-ROM supplied with the machine.  If you are unable to access it from there, please click the link below to download the electronic Handbook:

  imageCLASS D1370 - Brochures & manuals

  I hope this information is useful for you.  However, if you need more assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).

• Mounting MicroSD / Z2 connection via USB

  Hello world

  I'm fighting to connect my phone to my laptop via USB (Mount SD) cable.

  The phone recognizes the 64 Gb card that I have a few movies and music, but unlike my X10i old, I can't mount the SD

  Under settings storage Mount SD is grayed out?

  The computer recognizes something is plugged in I can hear the sound of the USB, but that's about it?

  So anyway, I do not see my phone on my laptop?

  Any idea?

  Thanks will give it a try.

• Change the drive letter when connecting via USB?

  When I plugged my DroidX (via USB) to my box "XP home", I don't have my 2 USB powered external drive enclosures. Thusly, Motohelper installed and configured itself, but took possession of the letters 'F' and 'G' driver previously used by my two external in the process.

  I need to get those back from some apps are looking for files in these places and I would rather not start reconfiguring all my apps on my XP machine.

  I looked in disk management, but don't see not all references to F or G, a frontend for the Motorola drivers for this problem.

  Someone knows a way to recover my drive letters and to reconfigure the drive letters of Motorola to my taste? (System Restore is out...)

  How to change a drive letter

  To change an existing drive letter on a drive, on a partition, or a volume, follow these steps:

  1. Sign in as an administrator or as a member of the Administrators group.
  2. Click Start, click Control Panel, and then click performance and Maintenance.
  3. Click Administrative Tools, double-click computer management, and then click disk management in the left pane.
  4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths.
  5. Click change.
  6. Click assign the following drive letter if it is not already selected, click the drive letter that you want to use, and then click OK.
  7. Click Yes when you are prompted to confirm the drive letter change.

  The letter of the drive, partition, or volume that you specified is changed, and the new drive letter is displayed in the appropriate drive, partition, or volume in the disk management tool.

  How to remove a drive letter

  To remove an existing drive letter on a drive, on a partition, or a volume, follow these steps:

  1. Sign in as an administrator or as a member of the Administrators group.
  2. Click Start, click Control Panel, and then click performance and Maintenance.
  3. Click Administrative Tools, double-click computer management, and then click disk management in the left pane.
  4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths.
  5. Click Remove.
  6. Click Yes when you are prompted to confirm the deletion.

  The drive letter is removed the disk, the partition or volume that you specified.

• OfficeJet 4500 G510g: Windows 10 Driver not recognize OJ4500 via USB. does not scan

  After the upgrade to Windows 10 JO 4500 would print not scan. (From August 2015) completely uninstalled and reinstalled the latest driver. The Setup program does not recognize that the printer has been connected via USB (the button "Next" is never active). I was able to print but never able to scan.

  Launch the center of solutions results in:

  HP solutions Center can not run because your device installation is not complete.

  Today, on 20 October, I downloaded another driver updated (September 2015, 140_408.5), uninstalled all the previous HP printer software/driver and tried again. The pilot 'up-to-date' has exactly the same problem - not recognizing that I have now connected to the printer via the USB port (trying various ports on the PC) and never goes to the "following".

  I clicked the help button.

  1 said to confirm that the device is connected and powered. Click back to try again. No luck.

  2 says that "some hidden configuration commands not will be over." Click back, wait a few minutes for the installation of the unit is complete. No luck.

  3. Affirms that if the problem persists, check the troubleshooting section in the Readme on the CD-ROM. I have no CD so no luck.

  Then, I couldn't leave the Setup program except by using the Task Manager to kill the process running.

  I'm now able to print, despite the above experience.

  Since the center of Solution will not work, I tried Scan color of the façade. View of the front panel "no scan options".

  Does anyone have a solution for this?

  SOLVED.

  Downloaded HP Print and Scan doctor. Despite the fact that I had just downloaded the latest driver, the good doctor displayed:

  A later version of the software is available for this product.

  After downloading and installing, he recognized my USB printer connected and completed the installation.

  Now, I can scan.

  Panel, programs and features shows the version 14.0 rel. 6

  HP: Why East-exit 6 not on the download page, rather than to release 5 that I downloaded today?

• BlackBerry Smartphones unable to view the files on SD card via USB on Windows PC

  I am a new PRIVATE owner (increased from Z10) and I can't seem to view the contents of my SD card on my WIN10 PC when it is connected via a USB cable.

  In fact, none of the content on the PRIV are displayed on my WIN10 PC when connected via USB.

  I installed the USB driver on the BlackBerry site, formatted the SD card several times installed solid Explorer file manager and the solid grip explore USB OTG.

  When I connect to my PC WIN10, I can see the folder "Blackberry STV-1000 ' pop up, but the content of the files folder is empty - with none under folders displayed - even if there is a"Music"folder on the SD card.

  I would like to see/transfer files to my PRIV connected via USB to my PC.  Why is it so difficult?

  Thank you
  Herb...

  Problem solved...

  I noticed that after plugging in the USB, you have to swipe down with one finger... noticed the 'connected in charge mode' and you select 'file transfer '.

  It works now!

  Bab... a lot of research to do this simple task is coming!

• Boot from an external HARD drive via USB

  I have an 8200 Elite SFF and wants to start an alternative system (not Linux, but * NIX - like BONE) of a disk external DRIVE, connected via a USB port. My main operating system is WIN 7 64 bit, but for some special tasks I´d like to use the alternative OS. It worked without any problem on my two previous stand-alone - elected USB as a boot device in the BIOS boot menu and it starts fine.  However, on my Compaq 8200 there no USB option in the start menu. However, when I connect the external HARD drive to a USB port, the name of the HARD disk appears in the start menu, but again, it won't start him.  Have heard that there is a tweak to fix this, or maybe I m wrong. Alternatively, my stand-alone motherboard just can´t boot from an external hard drive via USB? Any ideas?

  Yes,

  Unplug everything plugged to the computer except the keyboard, mouse and monitor.

  Then use this method to Flash the BIOS.  It's the best way to go.

  USB Device Flash BIOS DOS

  BACK Flash (DOSFlash.exe, FlshUefi.cpu) is the Flash BIOS DOS compatible system utility that can be used from a bootable BACK storage device (where the 'BACK' refers to a number of operating systems such as FreeDOS, DR - DOS or MS-DOS). FlshUefi.cpu is the driver required for DOSFlash.exe. To Flash the BIOS of the system to a bootable USB storage device, you'll need to copy the contents of the BACK Flash file on the USB device, start the PC from the USB device and run the DOSFlash application. To see a more complete description of the BACK flash utility, view DOSFlash.txt located in the folder BACK Flash. This folder also contains the required binary BIOS image.  The binary image file is named xxx_MMmm.bin , where "xxx" is the family of BIOS, 'MM' is the major version number and "mm" is the minor version number.  This file can be copied to the root directory of any removable media USB for use with F10 setup option «Flash system ROM»

  The display of the folder BACK Flash content

  The links on this post do not work. I copied the section from the BIOS flashing instructions for the specific section you need.

  Paul

• HP Deskjet 6980 will not install via USB or network

  I've recently updated my PC with a new mother/case/CPU card, etc. and trying to set up my Deskjet 6980 he tries to install two separate drivers.  One is named HP Deskjet 6980 DOT4USB and the other just HP Deskjet 6980.  Dot4USB installation is complete, however the drivers for "Hp deskjet 6980" fail.  The printer indicates only in my "devices and printers" as "HP Deskjet 6980" with an icon of troubleshooting.  whenever I run troubleshoot it tells me I need to install the drivers.  He's trying to install the drivers through troubleshooting or Windows Update every time, she fails.

  I tried to uninstall all instances of the name Deskjet from my computer, turn off the printer, restarted my computer and then turn on the printer/plug again for the same results.

  I plugged my printer on the network and while my laptop has no connection/printing problem, when I try to add it as a network printer in "Devices and printers" it gives me an error message saying "unable to install.  "Double check the name of the printer and make sure that the printer is connected to the network.  I tried both options "Use the driver is installed" and "replace the driver" and both give me the cannot install message.

  Some tips on what might be the problem or how to fix?  I downloaded each item including HP Deskjet 6980 on site without success.

  Windows 7.  As mentioned, the printer works perfectly when connected to my laptop via USB or wireless connection, my PC just does not want to connect via either.

  HP Print & Scan doctor tells me that I must not get the installer of your website, however there is no installer for Deskjet 6980.  The "Printer Install Wizard" & "Hardware diagnostic utility" mean that the printer is not supported by the software.   When I plug in the printer it goes through the process of installing driver as follows:

  

  I tried the update through troubleshooting, Windows Update and even to get the file on the Microsoft Web site (pg no longer exists). I thought about trying to find the driver on my laptop, but I'm not sure the actual name of the file what.

  * EDIT *.

  Looks like I solved the problem myself.  I don't know why, but my printer has appeared only at random in my Uniblue DriverScanner program (it would not be displayed when I looked before).  I was able to download & install from program Driverscanner and my printer works perfectly.  A strange question, but at least it was an easy fix.

  Thank you.

• Cannot connect every android device on my Windows 8 machine via USB. Worked fine when I got Windows 7.

  Since my upgrade, I can access is no longer my Nexus 7 Tablet nor my EVO 4 G LTE phone on my computer via a USB cable. I searched the Internet far from help. So far, it seems that no one can connect via USB. Thanks a bunch of Microsoft.

  Hi DanWilson,
   
  Thanks for the post about Microsoft Community.
   
  It seems that you are not able to connect any devices android on your computer with Windows 8.
   
  I would like to collect some of you before we head to the troubleshooting steps.
   
  (1) are you getting any error message or error code when connecting android devices?
  (2) are your other devices Universal Serial Bus works well?
   
  I would ask you to please follow the troubleshooting methods listed below:
   
  Method 1: Run the hardware troubleshooting tool. Follow these steps:
  
   
  a. press the Windows key + W key on the keyboard.
  b. type Troubleshooting in the search box, and then press ENTER.
  c. click on hardware and sound.
  d. click Next to run and follow the steps to perform this troubleshooting.
   
  Method 2: Try to connect to another Universal Serial Bus port and check if it helps.
   
  Method 3:
   
  Uninstall and reinstall the USB controllers. Follow these steps:
  
   
  a. press Windows + R keyboard key.
  b. type devmgmt.msc , and then press ENTER.
  c. expand Bus USB controllers.
  d. right-click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  e. restart the computer and reinstall the USB controllers.
   
  
  I recommend you to download and install the latest driver from the manufacturing site.
  
   
  Please go through the following links as reference:
  
   
  Install USB 3.0 and other USB devices:
   
  http://Windows.Microsoft.com/en-us/Windows-8/install-USB-3-USB-devices
   
  Why Windows is not find my device?
   
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device
   
  Why Windows is not find my device?
   
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device
  Please write back to us if the problem persists.

• HP LaserJet M401dn via USB

  Environment: Horizon view 5.2 with WIN7 linked clones and persistent disk.

  I have a HP LaserJet P1606dn printer. When you connect the printer via the usb port (this is how it should be implemented), the printer attempts to load, but installs as an optical device. The drivers are on the link clone. What I did next is to connect the printer to the network and to enter an IP address. I then went in the printer settings via a browser. The printer is a parameter called "automatic detection". I have disabled auto connect. Then I unplugged the printer and connected via USB. Now the printer is displayed correctly on a clone of link and works all the time.

  Now for the M401dn I added the drivers to the virtual machine. When I connect the printer via USB, it prompts you to install the drivers. You can go through this installer and it will install the printer on the link clone, but when you restart the machine the clone of link does not keep the installer. That's how a clone of link is supposed to work. I tried connecting via an IP network and see if there is an auto connect as the P1606dn, but I don't see one. So, how can I get this printer to be installed on a clone of link via USB?

  Thanks in advance for your help.

  I found the answer. For all those that are insterested the HP LaserJet M401dn printer has a display screen. Turn on/off service, HP Smart Install. Disable Smart Install.

• Control external synth MIDI via USB keyboard controller

  Friends,

  I'm trying to get a Novation Launchkey 25 to work as an external controller for mother-32 MOOG synthesizer.

  Software - Logic Pro 9

  USB - LaunchKey 25 Novation keyboard controller

  Interface - Focusrite Scarlett 18I6

  MacBook pro with current operating system

  Currently I have the out of the Focusrite and towards the MOOG MIDI cable. The Launchkey is connected via USB on my Mac. Logic can see the keyboard and interface, but not the MOOG. I just want to control the MOOG mother 32 with the keys. I am at a loss on how to implement the logic. Any help would be greatly appreciated.

  Thank you

  Steve

  1 MIDI OUT of the Focusrite at noon on the MOOG.

  2. create an external MIDI track with the release (in the Inspector) on the MIDI OUTPUT Focusrite. Also assign the desired MIDI (or ALL) channel. Better, the use of the channel the MOOG is set up to receive on.

  3 connect the headphones to the MOOG, to see if it is audio output. To get the audio MOOG through logic, you should run the audio Moog in the Scarlett outputs, create an Audio track, the value of channel inputs inputs use the MOOG, the value Preferences / Audio monitoring software allowed to logic. Allow recording the audio track. You can select two tracks (Audio and MIDI external) using shift/select, if necessary. Audio will come from Scarlett.

  It is another way to analyze using a plugin, get that first day.

• iPhone 5 c will not charge via USB on the laptop?

  Hi all.

  I have an iPhone 5 c and as about a week ago, does not charge via the USB port on my laptop. He sees very well in my wall sockets and Sockets USB as well, but not in my laptop. I have an Acer laptop running Windows 7. Windows is up to date, iTunes has the latest version installed. Whenever I plug in my phone, one of the following conditions occurs:

  (1) does not have

  (2) noise "plugged" USB lights, the window on the lower right, tell that a USB device has malfunctioned

  (3) (rarely) of phone calls after I tried several things

  What happened is I would plug my phone, she would charge via USB, iTunes opens automatically, and "trust to this computer" popup would come on my phone if I had unlocked it. None of this is happening now. I did the following to try to remedy:

  (1) power cord iPhone replaced (it was time for a new anyway)

  (2) uninstalled and reinstalled iTunes

  (3) restart computer and phone probably 29856 times

  (4) device Manager... nothing comes up at all, not even the unknown device. RARELY the unknown device comes up, then I get a "Code 10: this device cannot start" error, but it is * in a handbasket just trying to get to THIS point! and IF I do what they say to do to correct a code 10 (uninstall all USB and restart the computer, then USB devices hook to the top one at a time), so I'm now at my problem of a communication that don't meet pluse between my phone and PC

  5) tried to the registry editor, but not "upper filters" option rises

  (6) virtually every other option on this thread of 5 pages iphone not recognized by Windows 7

  Help, please?

  The USB port of your laptop does not provide sufficient power to recharge the phone. It is a hardware problem with your laptop, not the phone.