No sound - Pavilion m7480n.

Similar Questions

• Pavilion m7480n upgrade video card

  Hello.  I own a HP Pavilion m7480n and want to upgrade the video card with one that has HDMI.  Is there a specific type/model should I buy?  I'm looking for something in the order of $100.  I have the original software, including Windows XP.  Thank you.

  Boriken100 wrote:

  Thank you.  I understand I PCIEX16 used by the current video card.  I guess my question is there, which is now compatible with that?  Once again, I am looking for a video card with HDMI and would like it have 1 GB of power, if it is possible.  Thanks again!

  Hello

  Yes, it is possible. Please check this list to find out the card fits your budget. Please also note do not buy card that needs high power (approximately 10w - 15w more your existing card should be ok) otherwise you will have to buy a new power supply.

  Good luck.

• NO SOUND Pavilion dv7-4065dx

  HP Pavilion dv7-4065dx; Windows 7, 64-bit; No sound; red light on f11 (sound/activate button); use internal speakers - don't use phone ear or external speakers.  Here's what HP Support Assistant reports:

  Driver Device Status version

  ATI High Definition Audio device active AtiHDmi.sys 7.11.0.7706

  IDT High Definition Audio CODEC Error (52) stwrt64.sys 6.10.6292.0

  How to make a comeback?

  Thank you.

  Hello

  Right click the speaker in the taskbar icon and select "playback devices".  Double-click the entry 'Speakers and headphones' and in the next window, click the enhancements tab.  In the box containing these improvements, make sure that there is only a tick against "Legalization of Loudness" - remove all others.  Next, click the Advanced tab and make sure that "16 bit, 48000 Hz (DVD quality)" watch - if not choose this selection in the drop-down list. "  Click on apply and then click OK on all the other open windows.

  Kind regards

  DP - K

• RAM for Pavilion M7480n

  I would like to know what I need Ram I in not currently everything installed, I know that I can have up to 4GB... XP 32 bit operating system... Speed of ram would be nice too...

  Hello:

  Here is the link to the motherboard for your PC card, which contains information upgrade memory.

  http://support.HP.com/us-en/document/c00590499

  You can install 4 x 1 GB memory PC2-5300, or 4 x 1 GB PC2-6400 memory, that will be downlclock to 667 MHz.

  Here are some recommendations from me...

  http://www.Newegg.com/product/product.aspx?item=N82E16820231170

  http://www.Newegg.com/product/product.aspx?item=N82E16820148166

  http://www.Newegg.com/product/product.aspx?item=N82E16820134634

  Paul

• Help please: Personal Media Drive Installation

  Hello to all on the Forum HP... I was hoping I could get help regarding installation a HP Personal Media Drive in my desktop HP Pavilion m7480n computer... I am a newbie and considered average at best, with regard to my knowledge with computers... So, I was hoping that someone could possibly provide me with a link, or anything else... With step by step instructions... Photos included would be a bonus... lol... lol... I'll give you more information regarding the HP Personal Media Drive that I have below... Thank everyone once more in advance for their time and patience... Have a great day everyone.

  HP Personal Media Drive:

  -Model # hd5000s

  -Manufacturer RF863AA

  Parts supplied:

  -Adapter with power cord

  -6 USB 2.0 certified Interface cable

  Hi Nacster,

  It is very possible that the previous owner disconnected the cables. Here is an document (and video) player showing how to replace or add a hard HP. In it, you will see how the Bay of the PMD is connected the hard drive cage.

  It might even be that the internal USB cable is detached from the motherboard.

  I hope this helps. Let us know how it goes.

• card reader plug on motherboard

  I replaced the power supply and motherboard on my Pavilion m7480n and everything seems fine except that I can't find the place to plug in the memory card reader. Can you halp?

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&ObjectID=c00590499

  Above is the page on the phones in your system, I think.  In the lower right corner of the motherboard diagram and the photo is a 7-pin connector marked FPANEL, for front panel, which should be what you want.

• Please help: no sound on my desktop HP Pavilion Media Center Windows XP SP3 pm m7480n

  Hello to all on the forum... I was hoping I could get help with my situation... My original video card stopped working and I replaced it with a NVidia GeForce GT 610 graphics card... I was able to update the drivers for the card but I have no sound...? Also, my video files play but with no noise and my music files do not play because he does not recognize the codecs? Can someone help me please... Thank everyone in advance for their time and patience... Have a great day.

  Hi Paul,.

  Thanks again for the help... I managed to understand... You were correct when you said that it helped... However, I must have missed the update the driver for the SD Realtek Audio Manager... That was within the parameters of the device with a yellow question mark Manager... I updated the driver and fortunately everything is back to normal... Thank you again for your time and patience... Have a great day.

• HP Pavilion DPGEK44 Gaming: HP Pavilion Gaming DPGEK44 connected via the monitor HP Pavilion 24xw - no sound

  The sound on my laptop works fine until I connect it via HDMI to a monitor HP Pavilion 24xw.  Then the sound disappears.  If I disconnect it, the sound comes back.

  I tried to go to the 'Sound' of the control panel section.  There are two options:

  Realtek High Definition Audio speakers

  HP 24xw

  The default value is Realtek speakers.  When I use the test installation my laptop plays the sound test.  I've updated to the latest version of the driver.

  If anyone can help with why where the monitor audio disappears from my laptop?

  Thank you very much!

  Hi @Cat999,

  Welcome to the HP Forums!

  I understand that you have problems with your HP Pavilion Notebook DPGEK44 game, when you connect the HDMI cable to a HP Pavilion 24xw monitor. I'm happy to help you!

  Please try the steps in this guide, Troubleshooting HDMI screen and sound Issues.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this helps!

• HP pavilion dm4-3099se: sometimes no sound when I pass

  I have a laptop HP Pavilion dm4-3099se beats edition. Sometimes when I turn on my laptop so no audio from any player. I changed the players but problem not solved. I reinstalled my audio drivers from hp website, but its still occurs. Please help me solve this problem

  Hello @emasadkkhan,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I read your post about the problem of audio and wanted to help you!  I understand that when you start the laptop sometimes, there is no sound.

  First of all, try to review the following document that is related to your operating system and let me know how it goes:

  HP laptops - no noise or sound distortion from speakers (Windows 10)

  Laptops HP - no sound from speakers (Windows 8)

  HP laptops - no sound from speakers (Windows 7)

  HP Notebook PC - error: No. Audio Device is installed (Windows 8, 7 and Vista)

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great weekend!

• PC Pavilion laptop: no sound on Pavilion g6 after installing the new battery CMOS

  I have a Pavilion g6z - 1 d 00 CTO Notebook PC, model A2F43AV number.  It came with Windows 7 Home Premium, and I upgraded the operating system to Windows 7 Pro (64 bit).

  The problem is that I did not sound, either through headphones or the speakers even if the Volume is set at 55. I first noticed the audio problem after replacing the CMOS battery, as the laptop is 4 years old and he gave me intermittent wireless connectivity problems.  After installing the new battery CMOS, I noticed the wireless driver was missing and downloaded/installed.  Everything was fine except the audio.  Then I reset the BIOS but nothing there as the BIOS version is v.49, and it is the most recent.

  I have also downloaded/installed the driver audio and rebooted the PC.  Still, there is no noise.

  Finally, I have checked the audio drivers and the reporting system they work without any problem.

  What should I do next?

  Thanks, Terry

  @Terry57

  Thanks for the reply,

  I was under the impression that these links would take you to guide step by step, however, it seems that they do not work,

  However, I have provided details below:

  To perform a hard reset on a computer equipped with a removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  5. Remove the battery from the compartment to batteries.

  6. Press and hold button power for about 15 seconds, remove any residual electric charge capacitors that protect memory.

  7. Insert the battery and plug the power adapter into the laptop, but do not connect peripheral devices.

  8. Press the power button to turn on the computer.

  9. If a boot menu appears, use the arrow keys to select start Windows normally and then press the Enter key.

  10. After you have reconnected each peripheral device, run Windows Update and HP Support Assistant to update all device drivers.

  To perform a hard reset on a computer equipped with a sealed or non-removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  To perform a system recovery, this link should work: click here

  Keep me posted for any technical assistance,

  Kind regards

• Problem of sound with Skype only - HP Pavilion laptop Windows 7 x 64

  I have problems with the sound with Skype only - all other software that requires a sound work fine.  I don't hear my correspondent.  My Skype settings seem to agree and I get no error message.

  I run 7 x 64 window.  I have a laptop HP Pavilion G7.

  Any help?

  Hello

  Sorry, you have problems. For Windows 7, try this:
  
  Sign in to Skype. Click Tools at the top of the window, and then select Options in the menu drop-down. Click Audio settings in the left pane. Under the speakers, you can:

  • Use the Volume slider to adjust the volume.
  • Click on the arrow down in the drop-down menu to select the appropriate stakeholders.
  • Test the speakers by clicking on the green arrow next to the drop-down list of speakers.
  • Click on the link to make a free test call to make a test call.

  It may be a good idea to plug a headset as a test to see if it works. You don't need a headset with a microphone; Just use any headset allows you to listen to your music on your iPod. The nice thing about using a stereo headset is that you can always talk through the microphone on your computer, but only you will hear responses from your correspondents, and is as much your comments.

  Skype has a document of support practice that may help you: I can't hear my friend... (Windows desktop) .

  And now, the delicate question: it is possible that your friend accidentally cut his microphone? Or what is happening with all of your calls?

• Pavilion 500-056: accidentally disabled my speakers! sound/no

  So here's the scoop. My computer (HP Pavilion 500-056) had been broken for a year now, and I finally fixed and reinstalled windows 10. Everything worked well and I was very happy until I realized that I had no sound coming out of my speakers. Through my process of DIY autour, check the cables and the entry and other output sockets, there seemed to be no problem. I went in the sound mixer, and there, I accidentally disabled my speakers, so they don't pop up on the list more! I have no idea how to turn them on now, and I still have no idea how fix my sound. If someone could help pronto, I would be very happy! Thank you!

  Hello

  If they were just disabled, you can re-enable the as follows.

  Do a right-click the speaker icon in the taskbar and select "playback devices".

  In the next window, right-click on an empty area and enter a checkmark against "Show disabled devices".

  If your speakers are now listed, right-click them, then select activate.

  Kind regards

  DP - K

• HP Pavilion x 360-P1F10UA #ABA: short Popping noise through headphones before playing them all the sounds (brand new HP 13-s128nr with Realtek)

  Hello

  I hear a sound of pop via helmet whenever I play music or even he plays Windows system sounds.

  The noise is short, it is as if once you plug in your headphones.

  I believe that it has something to do with power management, because it seems that the sound system goes offline when nothing is done and once it turns to play something it makes noise.

  I found similar questions that people have had to face, but none of the worked for me.

  For example:

  http://h30434.www3.HP.com/T5/notebook-PC-sound-and-audio/HP-Pavilion-G6-2240sq-strange-sound-speaker...

  and

  http://Rog.ASUS.com/Forum/archive/index.php/t-35046.html?s=927083fd01c9f0ec873b7e9e8da8d47e.

  I did the online conversations with HP Media, but they were not able to find a solution. What they were doing was to uninstall/reinstall the drivers who did not work for me.

  In my view, that it is a software problem.

  I didn't expect that from HP, but I feel a little disappointed in my choice. I hope I can fix and not return.

  I would be grateful any suggesion.

  Thank you

  Bijan

  Hi, I have been looking for a solution to this problem and found that not using the Realtek HD Audio Manager/B & O stop audio popping. The problem with this driver is that it makes the card its close after 10-20 seconds of no audio output in order to save battery power and to our advantage, there is no way to disable this "feature". What you mean, its break-up, is similar to the helmet being handed over to since the restart of the sound card. I see that the audio is not as great after this fix. To do a choice so audio sacraficing a little quality to not burst or better audio quality and popping. I found these steps of the forums hp here, thanks to SteveCT99.

  1. Go to the Windows Device Manager > sound, video and game controllers section.
  2. In the list of the audio device drivers, look for Realtek High Definition Audio.
  3. Right-click and select disable. Down arrow on this driver, indicating it is disabled. (NOTE: at this point, you will not be able to play music files.)
  4. Right click and select Update driver software.
  5. Select Browse my computer for driver software.
  6. Select Let me pick from a list of drivers for devices on my computer.
  7. You should see a window that says Select the driver to install for this hardware device. NOTE: If you see a window that says something like This is the best driver for this device, close the window and repeat steps 4, 5 and 6.
  8. In the scheme box, select Audio device high definition (this is the device driver audio substitute) and click Next.
  9. In the Update driver warning window, click Yes. You should see a confirmation with thehigh definition Audio Device display window. Click on Close.
  10. In the list of drivers of audio device in the section audio, video and game controllers, you will notice that the high definition Audio device now displays instead ofHigh Definition Audio Realtek.
  11. When prompted to restart, click Yes

  I hope this helps!

• No sound after the s7530n pavilion slimline for Windows 7 RC1 upgrade

  I know that Windows 7 is still in version final candidate and so is not taken in charge by Wells, anyone, but I've seen some people have luck on this forum so I'm him kicking.

  I have a HP slimline s7530n Pavilion that came with Windows XP Media Center is installed.  I recently upgraded to Windows 7 RC1 (as well as all the other computers in my home) because of the extra boost of incredible performances provided by Windows 7, as well as the best new Media Center.  Unfortunately, while Windows 7 works fine on all my other systems, it fails in two areas on this slimline: it is not up to run Aero/Glass (which is not a problem, do not need glass on this system), but unfortunately the sound work no longer, which is a real disappointment, because Media Center is kinda useless without audio :-)

  When I move my mouse over the volume icon in the system tray ToolTip shows "no Audio output device is installed".  When I check under ' audio, video and game controllers "in Device Manager, there is only a single element:"High definition Audio Device", which says that it is working properly.

  Steps, I tried to solve the problems:

  -J' uninstalled the "High Definition Audio Device" in the Device Manager and rebooted.  It is automatically re - installs, but does not solve the problem.

  -J' downloaded the audio driver for Vista for this PC from the HP support page: "Realtek High Definition Audio Driver Update" - sp34998.exe.  I tried to install it directly, but got an error 'failure '.  Then I extracted all the files in a folder, right click on the "setup.exe" inside and set to run in compatibility of Vista and as an administrator, but running mode later, he gave the same "failed" error.  I then uninstalled the driver "High definition Audio Device" in Manager of peripheral and before restart, run sp34998 (in Vista compatibility and as administrator mode) configuration file, and this time installed without error.  He then asked to reboot.  After reboot, Windows 7 automatically reinstalled the driver of "High definition" Audio Device as before, and I'm back to square one, still no sound, even if "RealTek High Definition Audio Driver" does not in Add/Remove programs in Control Panel.

  -J' I uninstalled RealTek Vista driver and the "high definition Audio Device", then downloaded the original XP driver: ' Summer 2006 Original high definition Audio Drivers Realtek '-sp26730.exe the HP support page.  Same experience driver Vista, with some slight differences - even if I extracted the files, and then told the setup.exe to launch in Windows XP SP2 and administrator mode, that it fails eventually, but with messages such as "cann't find Match RealTek HD Audio Inf file!  (Yes, it's accurate, complete with broken and misspelled grammar "Cann't" error message).

  So I'm puzzled - I should anticipate problems with Windows 7 for embedded with audio systems, but my old Dell laptop for 6 year, works very well with Windows 7 and it has integrated everything (same course glass!), so if anyone has any advice I'm all ears.

  Thank you!

  and don't you know - after that for troubleshooting like a week and a half, I finally posted my question on this forum in desperation, and five minutes after the validation, I discovered the solution on my own.

  So for those who have this particular problem, please go to the RealTek page:

  http://www.Realtek.com.tw/

  Click on the "Downloads" link at the top.

  Click on the first link on the page: High Definition Audio Codecs (software)

  Check the box "I agree" to the legalese and then click the next button when it becomes available

  For the fifth result in the list, "Vista, Windows7 Driver (32/64 bits) driver only (executable file)", click on the 'GO' link to the right (I chose "Site 1"), then download the file to your desktop.

  If you have any audio drivers RealTek HP installed under the Control Panel, uninstall and restart.

  Then, run the executable RealTek above (when he throws an error message saying "Windows cannot verify the Publisher" click to install anyway), then restart.

  When your system returns to the top, you have the sound!  I am very happy.

• HP Pavilion x 360 (11.6 "): high slope howling sound

  My HP Pavilion x 360 (11.6 ") actually a acute high chirping when I turn the volume. Recently, I messed up with the settings to get my headphones to work. I have reset all sound settings and always have a high-pitched squeal noise. Please help me as soon as possible.

  Hi @MaxVaughan13,

  Welcome to the HP Forum! It is a wonderful location to converse with the community, get help and advice. You have a rewarding experience, I would include the following link for your perusal and reference. First time here? Learn how Post and more what is your precise model of the Pavilion x 360? Computers laptops HP - how can I find my model number, serial number or product?

  I understand that you have had a problem with your helmet and changed some settings. Now when you turn up the volume, you get a loud noise. Here are two links that I hope will help.

  Computers HP - solve the headphones and headphone problems (Windows 8)  Although Windows 10 is not listed the steps will be the same.

  HP - no sound from speakers (10 Windows) laptops

  You can also try a restore back before you have changed the settings, if the above didn't help. Computers HP - using Microsoft System Restore (Windows, 10, 8)  Please let me know the results.

  To express the gratitude of my post please click on the "Thumbs Up Icon'." "  If my post solves the problem you are experiencing, please click 'accept as Solution' to help others find what worked for you!