No sound with the Geforce 9800 GT

Similar Questions

• "Détarer" problem with the Torch 9800/Device Simulator

  Hello everyone,

  Im a very strange problem with the Torch 9800 (OS 6).

  I have an application developed with 5.0 SDK. Throughout the process of synchronization of this app, there is a point he gets a. tar.gz file that is unziped. For this purporse (in fact, the tar part / "détarer"), we use a tar / "détarer" 'library' we found here in the forum (http://code.google.com/p/j2metar/). This library works fine in all phones with OS 5.0 that we try and even on the simulators of somo 6.0.

  But there seems to be a problem with the torch. During the uncompress, there are an exception, because what is the reading of the structure of the tar (from the industry), load the bytes that are invalid, corrupt, dirty, memory, and it fails.

  The strange thing of all is that if I have only the routine détarer to the file (in the torch), it works! But when I run all my sinchronization, which open and close httpconnections and process the file on some points (sometimes the same point, others of different) fails.

  My question is... are at - it a known bug, issue, etc. with the BONE of the torch (touch device)? Of course, the first thing that jump to mind is "my code is incorrect, memory leaks (in Java, but perhaps odd that a stream was not getting close properly)" and so on, but I can't seam to find the problem. And like I said before, this application works fine with the same file tar.gz in other devices like the 8520 OS 5, 9780 OS 6, 8900 (OS 5).

  IM completely stuck with this problem and any help/test will be greatly appreciated.

  Here some code, the method that makes him détarer and calls the détarer/tar library:

  public static boolean "détarer" (String tarFileUrl, String destUrl) bird Exception {}

  FileConnection fconn = null;
  FileConnection tarFileConn = null;
  TarInputStream tis = null;
  Boolean bRet = false;

  try {}
  fconn = (FileConnection) Connector.open (destUrl, Connector.READ_WRITE);
  If (! fconn.exists ())
  fconn.mkdir ();   Create the folder if it does not exist
  fconn. Close();
  fconn = null;
              
  Create a TarInputStream
  tarFileConn = (FileConnection) Connector.open (tarFileUrl);
  TIS = new TarInputStream (tarFileConn.openInputStream ());
  tarFileConn.close ();

  Entry TarEntry;
  int count;
  data Byte = null;
              
  While ((input = tis.getNextEntry ())! = null) {}
  Count = 0;
  data = new ubyte [2048];

  fconn = (FileConnection) Connector.open (destUrl + entry.getName (), Connector.READ_WRITE);
  If (! fconn.exists ())
  fconn. Create();   create the file if it doesn't exist
  else {}
  fconn. Delete();    Create a new
  fconn. Create();
  }

  OutputStream os = fconn.openDataOutputStream ();
                  
  While ((count = tis.read (data))! = - 1) {}
  OS. Write (data, 0, count);

  }
                  
  OS. Flush();
  OS. Close();
                  
  fconn. Close();
  fconn = null;
             
  }

  TIS. Close();
  TIS = null;
              
  bRet = true;
              
  } catch (Exception e) {}
  e.printStackTrace ();
  throw e;
  } {Finally
  try {}
  If (tis! = null)
  TIS. Close();
  If (tarFileConn! = null)
  tarFileConn.close ();
  If (fconn! = null)
  fconn. Close();
  } catch (Exception e) {}
  }
          
  Return bRet;
  }

  Thank you!

  Santiago.

  Hello

  It is a problem with the OS 6.  I've posted about this before here:

  http://supportforums.BlackBerry.com/T5/Java-development/reading-and-writing-file-on-torch-9800/TD-p/...

  Basically, corruption may occur if you write to the stream simultaneously in different threads.  The solution is to ensure that a single file operation is occurring at a given time.  Some people have had the chance to control the size of the buffer to something as a multiple of (64 * 1024)-1. e.g. 65535.  In addition, you can rinse after each write to the buffer.  I have had no luck with this, but others.  If you look at the bug in JIRA, there is also no activity on this:

  https://www.BlackBerry.com/jira/browse/JAVAAPI-1513

  Good luck!

• I have lost sound with the last update, how can I get it back?

  Works with Windows Vista home Premium. All worked before the 13.0.1 firefox update. Other works sound but internet sound disappeared.

  Hi tazman12, when you say "up to date" not average you cancelled? There is a problem with the latest versions.

• Sound with the media problems

  My sound stopped working. I checked the drivers and they are all to date. I can't seem to understand the problem and the most annoying part is that all the system sounds like the start up, windows prompt sounds and basic as chest sounds games still work. No matter what noise of internet windows media player do not a sound. When I try to play a music file in windows media player, I get and error COOD11BA that says "Windows Media Player cannot play the file because there is a problem with the audio device. "It might not be a sound device installed on your computer, it can be used by another program, or it might is not working properly.

  NAAN

  Your driver can be present but corrupt

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• Download all packages or just the sound with the latest dates?

  Hi, maybe it's a stupid question, but when you go to the drivers and it shows are all pilots who are selected to download to your laptop you wanted to install only those with the latest dates or each package that is there?

  Hello:

  You must install the driver with the most recent date if you are sure this is a driver that you are interested in.

• BlackBerry smartphones, what's up with the Torch 9800 OS 6.0.0.747

  Hello again!
  Is someone can you please tell me what is the new update OS of the Torch 9800? I use 9800/6.0.0.246 bundle 695. I want to upgrade my OS to 6.0.0.747 (my first upgrade - if ever), but first of all, I want to know what has been added to the old operating system. Thank you!

  An upgrade of this nature is generally bug fixes. If your device works well for you, there is no need to upgrade. You won't get all the new features.

• BlackBerry Smartphones big problem with the torch 9800

  Hi mangment

  I have me Saudi Arabia, my services blackberry torch bay is STC

  but I have more problem needing urgent fixed yoyr end to avoid any problems with the client

  I give you the problem:

  -slow Internet a few open time nd not to open some time must be restart my phone

  Facebook - last worm is not working nd nd nd rss my spase twtier

  -software update blackberry form each time give no avalbel update

  -hang up

  -the slow volume

  -the world of the app does not work in Saudi Arabia

  -My worm's last 6.0.0.246 but still you are not average to resolv urgnet need resolve or

  I need torch nd my mony due am customer feedback

  thnks alharbi

  Yes, you should be able to update the device without problem.

  For other questions, please contact your technical service provider support. If they cannot help you resolve anything, ask them to bring the issue to a level RIM tech support person.

  Good luck

• Latency problem Satellite U500 - 1DZ CPD with the geforce 310M graphics card

  Hello

  I have a problem with a DPC latency caused by the driver of NVIDIA card.
  I use my computer for audio and it is really not possible to work.
  chart with geforce abled:
  http://nsm04.casimages.com/IMG/2010/09/22/100922123519210586795529.PNG

  When I turn off the graphics card:
  http://nsm04.casimages.com/IMG/2010/09/22/100922123519210586795528.PNG

  Please give me an answer.

  My computer is a Toshiba satellite U500-1DZ, intel i5
  Thank you

  Hello

  How about driver sound, display driver and BIOS update.
  Have you tried that?

  To be honest, I don't know if this could help you or not, but if an update is available, then you should do this

  You said, audio performance is best when the GPU is disabled
  It chip NVidia s then maybe you should take a look in the nVida forum in order to get more details

• Satellite P100-238: stuttering graphics and sound with the game

  Hello

  A few days ago, I bought a P100-238 both for business and holiday makers with leisure activities include mainly games, I thought this would be a great opportunity to take the next level and buy something powerful with Vista on board... IM starting to think ive made a big mistake. First impressions of the laptop were great (and vista although it is a little welfare State is very good).

  The problems started when I installed a few games (Please take into account, it is a system of 4 GB with 2 gig of ram and a Geforce 7900 gs graphics card, it should theoretically be ideal). The first few games I tried was wonderful... If you stopped, but as soon as you moved (in the game) about every 3 seconds the games would stutter to stop, then start again... every 3 seconds. Okay, I need the drivers, so I jumped on nvidia and tried installing different drivers to see none to work with laptops. In fact whenever I tried to install I got the message that or the other driver is up-to-date or that I'm «not equipped for vista» Anyway to cut a long story short, I discovered www.laptopvideo2go.com when I discovered that Nvidia does not support drivers for laptops (even once cut a long and painful story short) so I used it recommended modded INF files as well as various pilots until the later. Unfortunately I still had the same problem, someone recommended it can become again the sound driver so I tried that no different.

  After further investigation on various forums, it seems im not the only person who knows these probems. On these boards, I noticed that someone had the sound and graphics too jerky and sent it for repair to have the CPU, motherboard, ram etc replaced until they found the error on the HARD drive and once replacement he was fine.

  Using this info and finally think I had put inside of it I took my laptop to the store and he was replacing, ultimately reinstalling everything and lift a game and running... guess what... still the same.
  This is totally unacceptable.
  How do you market a product as games and entertainment laptop when she's obviously serious faults preventing these activities.

  Anyone here have the solution? Also, I should mention that this problem persists when the resolution and graphic details fell to a minimum in the game.

  Thank you
  Darren

  [Edited by: admin]

  It's not a hardware problem or a laptop, but Windows Vista!
  Check out the other discussions in forum games on Vista performance with games!
  Some people have installed XP and it s running like in a dream!

  It seems that we have to wait for a first Microsoft Vista SP1 or certain patches.
  Maybe then the Vista will be more compatible with all these games on the market!

• No sound with the Radeon HD 4350

  I have a Compaq Presario sr1717cl he came with integrated ATI Radeon Xpress 200, I bought and installed the ATI Radeon HD 4350 512 MB DDR2 Premium Grafphics card and now I have no sound, I goto sounds and audio designs properties and it says: No Audio device. and I can't click on anything except in the Hardware tab, could someone please help me? Thanks in advance.

  Amy

  Yes.

  I think you want audio drivers available here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=228&LC=en&cc=us&DLC=en&sw_lang=&product=1822601#n146

  Download, install, re - start and you should have sound. Re-post if it does not, indicating that error messages, what ever you can get.

  See you soon,.

  Jerry

  PS: disable you the graphic chipset built into the BIOS?

• Windows Movie Maker, a problem of sound with the "Split"?

  Well, that makes me extremely crazy because I'm unable to download videos on youtube. So I have this video which lasts 7 minutes. I decided to split the video into two (at halfway accurate). Then I inserted a photo in the middle of the video. The problem here is that after the image in the Middle, the second part of my video plays fine except for the sound (my voice). He decided to play my voice from the first part of the video response and bacsically everything for the second clip! I tried everything in my power to make it work. I even tried to cut the second part, while he was alone and recording, but guess what? He still played my voice of the first part of the video! It is making me upset moajorly. I also have the updated version if you were wondering. It is much too difficult to work with, especially since I'm used to the other older, so I think I'm missing a certain button or article or something. I don't even know. So my question is, how to split a video by half, add a picture and make sure that my voice is match with my mouth & video. Moreover, I do not have voice on it or add audio. Quite simply, I filmed a video of me talking.

  Since you use Movie Maker 6 and not Live Movie Maker, what follows
  tutorial composed originally for XP, Movie Maker, you should get started

  For the timeline, drag a second copy of the video to Audio / Music
  follow and drag it left or right to align on the Audio track.

  Then right-click / mute the Audio track.

  Now, you can split the video anywhere you want... CTRL + L... and delete
  a section... then insert a Photo and give it the same length as the
  segment you removed.

  Here's another method:

  Split your video clip on each side of the area where will be the stills.

  Now... drag the part cut on the audio / music. BTW... If you want to
  to add a second 5 again... Remove 5 seconds of the video clip. (info below
  splitting if you need it)

  Drag your fixed shots to the timeline and drop it off at the place where
  you have deleted the video.

  The Audio clip on the audio / music can be dragged to the right or left to
  adjust its position.

  More information about the Division...

  "Split a Clip in MM2.1.

  Drag the audio clip on the timeline.

  Play the video/audio by clicking on the 'Play' button under the display screen.

  You will see the playback indicator (vertical line), advancing through the
  timeline.

  Click on the "Pause" button at the location where you want to cut and type...
  CTRL + L or click the "Split" button at the bottom of the display screen.
  (you can also make adjustments by dragging the playback indicator)

  Make splits as much as you want and remove unwanted in law clips
  Click on / delete.

• Sound and no sound with the top of the tower.

  I had problems with my sound to were I had no sound at all. I got the computer up-to-date with drivers, but the problem isn't that half fixed so to speak. When I turn on my computer I have no sound, but when I restart the computer or restart I have sound. This is the model that I have done my best to describe. I mean, it happens all the time. I just want sound without a reboot. I want to solve this problem. Any help would be appreciated.

  Top of the tower.

  Reference Dell

  Service tag 940BVI

  Product Inspiron 3520

  8.. 64 bit

  Have you spent at the store and installed the 8.1 update yet?  It solves several problems of hundreds, including audio problems.  I'd like to get this update before do you anything else, or you will waste your time.

  That said, you can try this quickly.

  1. Right click on the lower left corner of the screen (or on the +X), then choose Prompt Admin (important: it takes the admin option).

  2. At the Admin command prompt, type net stop audiosrv and press ENTER.  This will stop the Audio Service.
  3. Now, type net start audiosrv and press Enter again.  This restarts the Audio Service.
  4. Try to replay audio.

• stop the sound with the action script?

  Hello

  Im a beginner with action script, and is there a way to stop a sound using actionscript?

  My sound is called "CRICKET.mp3", if it is necessary to know.

  You can still use:

  SoundMixer.stopAll ();

  to stop all sounds.  but, if you want to stop a particular sound, you must apply stop() to soundchannel your sound (created when the play() method is applied to your sound).

• BG sound with the out of control in ft3/min

  Hello;
  I'm writing a sound script bg with a control to turn on and off. I'm trying to find a way to make the control work once. I mean, if the user it stops on the homepage, the site remembers this action and each page is not turn it back on. I realize, you can accomplish this using images, but I don't want to use images. This is the script I use:
  
  < body background = "#111111" LINK = "#ffff00" vlink = "#000000" BGSOUND SRC = CFdocs/ocean.wav"' LOOP = INFINITE >". "
  < EMBED SRC = "CFdocs/ocean.wav" AUTOSTART = "true" HIDDEN = "false" LOOP = "true" > "
  
  Is it possible to do a DB store made the choice to the user and use this choice through the site? Attach it to a db some how?
  
  Please help, any ideas would be appreciated at this point.
  
  Thank you
  
  Phoenix

  I worked more code... trying to get it a control of the function. I can be a bit and stay to ensure a session will operate. Here is the code on a fixed day. Is it possible to do this way to make it work? and how can I get a user logs to make it work then anyone can turn on and off on all pages of site?

  Phoenix

• My photos app does not sound with the video export

  Then. Im trying to drag my videos, Photos and on my desk. For some reason any after you copy its reading of the video, but I don't get all the sounds?

  If I play the video in Photos, sound works fine... Any ideas?

  Do not hang out, but use the ➙ unmodified export Original for 1 video file menu option.  See if that you will get a playable file.